Study guide

Water Chemistry: pH, Alkalinity & Hardness

FE Environmental Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction, Mathematics & Ethics

Exam Format, NCEES CBT Logistics & Blueprint Map Calculus & Differential Equations Probability, Statistics & Regression Numerical Methods & Engineering Math Mathematics Applications for Environmental FE

2 Ethics, Economics & Materials

NCEES Model Rules & Engineering Ethics Professional Practice, Liability & Public Safety Engineering Economics: Time Value of Money Benefit-Cost, Replacement & Inflation Analysis Materials: Concrete, Corrosion & Polymers

3 Environmental Science & Chemistry

Geosynthetics & Environmental Materials Environmental Chemistry & Stoichiometry Water Chemistry: pH, Alkalinity & Hardness Microbiology, BOD Kinetics & Monod Growth Henry's Law & Phase Equilibrium for Air Quality

4 Risk Assessment & Water Resources

Environmental Science Applications EPA Four-Step Risk Assessment Paradigm Exposure, Dose, Hazard Quotient & Cancer Risk Hydrology & Rainfall-Runoff Analysis Open-Channel Flow & Manning Equation

5 Groundwater & Water Treatment

Groundwater: Darcy, Theis & Cooper-Jacob Streeter-Phelps & Water-Quality Modeling Water Treatment: Sedimentation & Filtration Disinfection, CT Rule & Chlorination Wastewater: Activated Sludge & BOD Removal

6 Advanced Treatment & Air Quality

Advanced Treatment: MBR, GAC & RO Sludge Handling & Water Reuse NAAQS, Criteria Pollutants, HAPs & AQI Gaussian Plume, Pasquill Stability & Effective Stack Height AP-42 Factors & Air Pollution Control Technologies

7 Air Permitting & Solid/Hazardous Waste

PSD, NSR, BACT, LAER, Title V & Offsets RCRA Lists, Characteristics & Generator Categories Subtitle D Landfill Design, Liners & Leachate CERCLA, UST, TCLP & Land Disposal Restrictions MSW Collection, Transfer, Composting, WTE & Recycling

8 Sustainability, EHS & Exam Day

LCA Stages, Carbon Footprint & Scope 1/2/3 Emissions LEED Credits, ISO 14001 EMS & Triple Bottom Line PELs, TLVs, Hierarchy of Controls & Confined Spaces EPCRA Reporting, TRI Form R, DOT Hazmat & RCRA Manifests Exam Format, NCEES CBT Logistics & Blueprint Map

Water Chemistry: pH, Alkalinity & Hardness

Key Takeaways Explain This Topic AI

pH = -log10[H+]; pH 7 is neutral at 25°C.

Alkalinity buffers against pH drop from acid addition.

Hardness measures Ca²⁺ and Mg²⁺; expressed as mg/L as CaCO₃.

Carbonate, bicarbonate, and hydroxide alkalinity dominate natural waters.

Langelier Saturation Index predicts CaCO₃ scaling or corrosion tendency.

Last updated: July 2026

Quick Answer: pH measures acidity; alkalinity is acid-neutralizing capacity; hardness is Ca²⁺/Mg²⁺. They govern coagulation, softening, corrosion, and scaling.

pH pH = − log ⁡ 10 [ H + ] \text{pH} = -\log_{10}[\text{H}^+] pH = − lo g 10 ​ [ H + ]

Each pH unit is tenfold change in H⁺ activity.

Alkalinity

Titration to pH 4.5 (often) reports P, M, OH alkalinity contributions. Alkalinity stabilizes pH during coagulant addition — insufficient alkalinity causes pH crash.

Hardness Hardness (mg/L as CaCO 3 ) \text{Hardness (mg/L as CaCO}_3) Hardness (mg/L as CaCO 3 ​ )

from Ca²⁺ and Mg²⁺. Temporary hardness from bicarbonates removable by boiling/lime; permanent needs soda ash.

LSI (Conceptual)

LSI > 0 tends toward CaCO₃ scaling ; LSI < 0 tends toward corrosive non-scaling conditions.

Worked Example

Raw water pH 7.2, alkalinity 90 mg/L as CaCO₃. Adding alum consumes alkalinity — verify remaining > 30 mg/L or add lime.

Exam trap: Alkalinity ≠ pH — high alkalinity can coexist with moderate pH.

Multi-Step Workflow

List givens with units, select the governing relationship, convert to a consistent unit set, solve, and compare to a rough estimate.

pH, Alkalinity, and Hardness

  • Parameter Meaning Typical FE angle
  • pH − log ⁡ [ H + ] -\log[H^+] − lo g [ H + ] Acid/base, corrosion
  • Alkalinity Acid-neutralizing capacity Buffering, coagulation
  • Carbonate system H₂CO₃*/HCO₃⁻/CO₃²⁻ Open vs closed system
  • Hardness Ca²⁺+Mg²⁺ as CaCO₃ Softening, scaling
  • Langelier/corrosion indices Conceptual Stable water
  • Worked Hardness Example

Ca²⁺ = 60 mg/L as Ca, Mg²⁺ = 12 mg/L as Mg.

Hardness as CaCO₃ ≈ 60 × ( 50 / 20 ) + 12 × ( 50 / 12.15 ) ≈ 150 + 49 ≈ 199 60\times(50/20) + 12\times(50/12.15) \approx 150 + 49 \approx 199 60 × ( 50/20 ) + 12 × ( 50/12.15 ) ≈ 150 + 49 ≈ 199 mg/L as CaCO₃ (moderately hard).

On the Exam: Distinguish carbonate (temporary) vs noncarbonate (permanent) hardness when lime-soda softening is mentioned.

pH, Alkalinity, and Hardness

  • Parameter Meaning Typical FE angle
  • pH − log ⁡ [ H + ] -\log[H^+] − lo g [ H + ] Acid/base, corrosion
  • Alkalinity Acid-neutralizing capacity Buffering, coagulation
  • Carbonate system H₂CO₃*/HCO₃⁻/CO₃²⁻ Open vs closed system
  • Hardness Ca²⁺+Mg²⁺ as CaCO₃ Softening, scaling
  • Langelier/corrosion indices Conceptual Stable water
  • Worked Hardness Example

Ca²⁺ = 60 mg/L as Ca, Mg²⁺ = 12 mg/L as Mg.

Hardness as CaCO₃ ≈ 60 × ( 50 / 20 ) + 12 × ( 50 / 12.15 ) ≈ 150 + 49 ≈ 199 60\times(50/20) + 12\times(50/12.15) \approx 150 + 49 \approx 199 60 × ( 50/20 ) + 12 × ( 50/12.15 ) ≈ 150 + 49 ≈ 199 mg/L as CaCO₃ (moderately hard).

On the Exam: Distinguish carbonate (temporary) vs noncarbonate (permanent) hardness when lime-soda softening is mentioned.

pH, Alkalinity, and Hardness

  • Parameter Meaning Typical FE angle
  • pH − log ⁡ [ H + ] -\log[H^+] − lo g [ H + ] Acid/base, corrosion
  • Alkalinity Acid-neutralizing capacity Buffering, coagulation
  • Carbonate system H₂CO₃*/HCO₃⁻/CO₃²⁻ Open vs closed system
  • Hardness Ca²⁺+Mg²⁺ as CaCO₃ Softening, scaling
  • Langelier/corrosion indices Conceptual Stable water
  • Worked Hardness Example

Ca²⁺ = 60 mg/L as Ca, Mg²⁺ = 12 mg/L as Mg.

Hardness as CaCO₃ ≈ 60 × ( 50 / 20 ) + 12 × ( 50 / 12.15 ) ≈ 150 + 49 ≈ 199 60\times(50/20) + 12\times(50/12.15) \approx 150 + 49 \approx 199 60 × ( 50/20 ) + 12 × ( 50/12.15 ) ≈ 150 + 49 ≈ 199 mg/L as CaCO₃ (moderately hard).

On the Exam: Distinguish carbonate (temporary) vs noncarbonate (permanent) hardness when lime-soda softening is mentioned.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Gran Alkalinity Titration

P alkalinity (phenolphthalein) and M alkalinity (methyl orange) — carbonate vs bicarbonate vs hydroxide fractions from P and M relationships in Handbook.

Hardness Removal Math

200 mg/L hardness to 80 mg/L target → remove 120 mg/L as CaCO₃. Lime dose from stoichiometry (exam gives reactions).

LSI Worked Sketch

pH 7.8, alkalinity 100 mg/L, calcium 80 mg/L, TDS 300 mg/L → compute pHs from Handbook Langelier formula → LSI = pH − pHs. Positive LSI → scaling tendency.

Corrosion vs Scaling

Low alkalinity + low hardness → aggressive water may leach lead from pipes — orthophosphate or pH adjustment for stability.

Temperature Effect

Calcium carbonate solubility decreases with temperature — hot water heaters scale faster.