Study guide
Materials: Concrete, Corrosion & Polymers
FE Environmental Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction, Mathematics & Ethics
Exam Format, NCEES CBT Logistics & Blueprint Map Calculus & Differential Equations Probability, Statistics & Regression Numerical Methods & Engineering Math Mathematics Applications for Environmental FE
2 Ethics, Economics & Materials
NCEES Model Rules & Engineering Ethics Professional Practice, Liability & Public Safety Engineering Economics: Time Value of Money Benefit-Cost, Replacement & Inflation Analysis Materials: Concrete, Corrosion & Polymers
3 Environmental Science & Chemistry
Geosynthetics & Environmental Materials Environmental Chemistry & Stoichiometry Water Chemistry: pH, Alkalinity & Hardness Microbiology, BOD Kinetics & Monod Growth Henry's Law & Phase Equilibrium for Air Quality
4 Risk Assessment & Water Resources
Environmental Science Applications EPA Four-Step Risk Assessment Paradigm Exposure, Dose, Hazard Quotient & Cancer Risk Hydrology & Rainfall-Runoff Analysis Open-Channel Flow & Manning Equation
5 Groundwater & Water Treatment
Groundwater: Darcy, Theis & Cooper-Jacob Streeter-Phelps & Water-Quality Modeling Water Treatment: Sedimentation & Filtration Disinfection, CT Rule & Chlorination Wastewater: Activated Sludge & BOD Removal
6 Advanced Treatment & Air Quality
Advanced Treatment: MBR, GAC & RO Sludge Handling & Water Reuse NAAQS, Criteria Pollutants, HAPs & AQI Gaussian Plume, Pasquill Stability & Effective Stack Height AP-42 Factors & Air Pollution Control Technologies
7 Air Permitting & Solid/Hazardous Waste
PSD, NSR, BACT, LAER, Title V & Offsets RCRA Lists, Characteristics & Generator Categories Subtitle D Landfill Design, Liners & Leachate CERCLA, UST, TCLP & Land Disposal Restrictions MSW Collection, Transfer, Composting, WTE & Recycling
8 Sustainability, EHS & Exam Day
LCA Stages, Carbon Footprint & Scope 1/2/3 Emissions LEED Credits, ISO 14001 EMS & Triple Bottom Line PELs, TLVs, Hierarchy of Controls & Confined Spaces EPCRA Reporting, TRI Form R, DOT Hazmat & RCRA Manifests Exam Format, NCEES CBT Logistics & Blueprint Map
Materials: Concrete, Corrosion & Polymers
Key Takeaways Explain This Topic AI
Corrosion of metals in water and wastewater is electrochemical — galvanic couples, dissolved oxygen, and pH drive rust and pitting in pipes and tanks.
Concrete deterioration in sewers involves sulfuric acid from H₂S oxidation; protective linings and ventilation reduce biogenic corrosion.
Polymers (PVC, HDPE, PTFE) resist many acids and chlorides; check temperature limits and chemical compatibility charts.
Stress, fatigue, and creep affect pump shafts, clarifier mechanisms, and landfill liner seams over decades of service.
Material selection balances chemical resistance, mechanical strength, cost, and regulatory acceptance (NSF/ANSI 61 for potable contact).
Last updated: July 2026
Quick Answer: Environmental engineers pick materials that survive chemical attack , moisture , and mechanical loading . Focus on corrosion mechanisms (galvanic, pitting, MIC), concrete sewer corrosion , and polymer compatibility for pipes and liners.
Treatment plants, conveyance systems, and containment structures operate in aggressive environments. Selecting the wrong metal or liner leads to leaks, contamination, and costly replacement — material science on the FE Environmental exam (~5%) tests whether you understand why materials fail and how to prevent it.
Atomic Structure and Bonding (Applied View)
Materials behave according to bonding type:
- Bond type Example materials Environmental note
- Metallic Ductile iron pipe, stainless steel Susceptible to electrochemical corrosion
- Ionic/ceramic Concrete, clay pipe Resist many chemicals; brittle
- Covalent/polymer PVC, HDPE, FRP Broad chemical resistance; temperature limits
You do not need quantum mechanics — know that metals donate electrons in corrosion cells and polymers are long-chain molecules whose side groups determine chemical resistance.
Corrosion Fundamentals
Corrosion is an electrochemical process requiring anode, cathode, electrolyte, and metallic path.
At the anode (oxidation): Fe → Fe 2 + + 2 e − \text{Fe} \rightarrow \text{Fe}^{2+} + 2e^- Fe → Fe 2 + + 2 e −
At the cathode (reduction, in aerated water): O 2 + 2 H 2 O + 4 e − → 4 OH − \text{O}_2 + 2\text{H}_2\text{O} + 4e^- \rightarrow 4\text{OH}^- O 2 + 2 H 2 O + 4 e − → 4 OH −
Galvanic corrosion occurs when two dissimilar metals contact in electrolyte. The more active metal (lower nobility) corrodes preferentially. Example: iron connected to copper in saline water — iron is the anode.
- Metal (approx. activity) Common use
- Zinc, magnesium Sacrificial anodes
- Iron/steel Pipe, structures
- Stainless steel (passive Cr₂O₃ film) Tanks, instruments
- Copper Laterals, roofing (not with aggressive ammonia)
Pitting breaks localized passive films on stainless steel in chloride-rich environments (coastal, de-icing salt).
Microbiologically influenced corrosion (MIC) — sulfate-reducing bacteria generate H₂S and acidic microenvironments under biofilms in oil pipelines and buried ductile iron.
Corrosion Control Strategies
Material upgrade — 316 stainless vs. 304 in chlorides; HDPE instead of unlined steel.
Cathodic protection — sacrificial zinc/magnesium anodes or impressed current.
Coatings and linings — epoxy, polyurethane, cement mortar lining in ductile iron water pipe.
Chemistry control — pH adjustment, dissolved oxygen removal, corrosion inhibitors (orthophosphate in drinking water).
Design — eliminate crevices, isolate dissimilar metals with insulators, avoid stagnant zones.
Worked example — galvanic series concept: A bolt of plain carbon steel attaches a copper grounding strap in a wet sump. The steel bolt corrodes rapidly because it is anodic to copper. Replace with stainless hardware or isolate with nylon washers.
Concrete in Environmental Structures
Concrete is Portland cement + aggregate + water. Reinforced concrete appears in clarifiers, aeration basins, and headworks.
Ordinary deterioration: Carbonation lowers pH at rebar surface, depassivating steel and causing rust expansion and spalling.
Sewer corrosion (biogenic): Sulfate in wastewater is reduced to H₂S in anaerobic zones. H₂S gas escapes to the headspace; bacteria on moist pipe crown oxidize it to sulfuric acid , attacking concrete above the flow line.
Mitigation:
- Increase turbulence/aeration to limit H₂S release
- Ventilate and scrub headspace gas
- Apply epoxy or calcium aluminate linings
- Use PVC or HDPE in new construction in known corrosive sewers
- Polymers and Thermoplastics
- Polymer Typical use Chemical notes
- PVC Gravity sewer, conduit Strong acids/bases; avoid some solvents
- HDPE Landfill liners, force mains Excellent chemical resistance; fusion welded
- PP Chemical tanks Good acid resistance
- PTFE (Teflon) Gaskets, linings Exceptional inertness; expensive
- FRP Odor scrubbers, tanks Glass fiber + resin; resin choice matters
Check temperature — PVC softens above ~60°C. UV degradation affects exposed plastics; bury or coat.
NSF/ANSI 61 certification is required for materials in contact with potable water in the U.S.
Mechanical Behavior
Stress σ = F / A \sigma = F/A σ = F / A — tension, compression, shear in supports and soil-loaded structures.
Strain ε = Δ L / L 0 \varepsilon = \Delta L/L_0 ε = Δ L / L 0 — elastic recovery if below yield.
Young's modulus (E) — stiffness; steel E ≈ 29×10⁶ psi; concrete Ec ≈ 3–5×10⁶ psi depending on mix.
Fatigue — cyclic loading from pumps and mixers causes crack growth below yield strength.
Creep — slow deformation under sustained load in polymers and concrete at stress and temperature.
Environmental FE items may ask you to compare allowable stress to applied stress for a simple member or identify which material is appropriate for a given chemical exposure table.
Phase Diagrams and Alloys (Light Coverage)
Iron-carbon phase diagrams explain steel grades. Stainless steels contain ≥10.5% chromium forming a passive chromium oxide layer. Ductile iron offers higher toughness than cast iron for water mains.
Failure Analysis Checklist
When a scenario describes premature failure, ask:
Is the electrolyte present (water, soil moisture)?
Are dissimilar metals coupled?
Is chloride or H₂S present?
Is the material stressed while corroding?
Was the wrong polymer specified for solvent or temperature?
Exam trap: Stainless steel is not universally corrosion-proof. Chlorides and lack of oxygen in crevices destroy passivity — specify correctly or use non-metallic alternatives.
Material science supports safe, durable infrastructure. On the FE Environmental exam, link chemistry in the environment to the physical integrity of the systems you design.
Composite Materials and Linings
Fiber-reinforced plastic (FRP) tanks and piping resist chlorine and many acids. Lining systems (epoxy, vinyl ester, rubber) rehabilitate steel and concrete without full replacement. Specify compatibility with cleaning chemicals (hypochlorite, caustic) used in the facility.
Thermal Expansion and Joint Design
Buried PVC and HDPE expand with temperature swings. Bell-and-spigot joints, expansion loops, and proper backfill prevent buckling. Above-grade chemical piping needs anchor and guide spacing per manufacturer data.
Material Testing on FE Items
Exam scenarios may present tabular corrosion rates or chemical compatibility charts. Read the table axis labels — temperature and concentration change acceptable materials. When two materials are acceptable, total life-cycle cost and maintainability break ties, not chemistry alone.