Study guide

Streeter-Phelps & Water-Quality Modeling

FE Environmental Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction, Mathematics & Ethics

Exam Format, NCEES CBT Logistics & Blueprint Map Calculus & Differential Equations Probability, Statistics & Regression Numerical Methods & Engineering Math Mathematics Applications for Environmental FE

2 Ethics, Economics & Materials

NCEES Model Rules & Engineering Ethics Professional Practice, Liability & Public Safety Engineering Economics: Time Value of Money Benefit-Cost, Replacement & Inflation Analysis Materials: Concrete, Corrosion & Polymers

3 Environmental Science & Chemistry

Geosynthetics & Environmental Materials Environmental Chemistry & Stoichiometry Water Chemistry: pH, Alkalinity & Hardness Microbiology, BOD Kinetics & Monod Growth Henry's Law & Phase Equilibrium for Air Quality

4 Risk Assessment & Water Resources

Environmental Science Applications EPA Four-Step Risk Assessment Paradigm Exposure, Dose, Hazard Quotient & Cancer Risk Hydrology & Rainfall-Runoff Analysis Open-Channel Flow & Manning Equation

5 Groundwater & Water Treatment

Groundwater: Darcy, Theis & Cooper-Jacob Streeter-Phelps & Water-Quality Modeling Water Treatment: Sedimentation & Filtration Disinfection, CT Rule & Chlorination Wastewater: Activated Sludge & BOD Removal

6 Advanced Treatment & Air Quality

Advanced Treatment: MBR, GAC & RO Sludge Handling & Water Reuse NAAQS, Criteria Pollutants, HAPs & AQI Gaussian Plume, Pasquill Stability & Effective Stack Height AP-42 Factors & Air Pollution Control Technologies

7 Air Permitting & Solid/Hazardous Waste

PSD, NSR, BACT, LAER, Title V & Offsets RCRA Lists, Characteristics & Generator Categories Subtitle D Landfill Design, Liners & Leachate CERCLA, UST, TCLP & Land Disposal Restrictions MSW Collection, Transfer, Composting, WTE & Recycling

8 Sustainability, EHS & Exam Day

LCA Stages, Carbon Footprint & Scope 1/2/3 Emissions LEED Credits, ISO 14001 EMS & Triple Bottom Line PELs, TLVs, Hierarchy of Controls & Confined Spaces EPCRA Reporting, TRI Form R, DOT Hazmat & RCRA Manifests Exam Format, NCEES CBT Logistics & Blueprint Map

Streeter-Phelps & Water-Quality Modeling

Key Takeaways Explain This Topic AI

Streeter-Phelps models dissolved oxygen sag downstream of an organic discharge with deoxygenation and reaeration.

Ultimate BOD L0 is the total oxygen demand after infinite time; k_d is the deoxygenation rate constant.

Reaeration rate k_a depends on velocity, depth, and turbulence — faster in riffles than pools.

Critical deficit occurs at distance Dc where DO is minimum; must meet fisheries standards.

Mixing at outfalls dilutes pollutant concentrations before biochemical reactions proceed downstream.

Last updated: July 2026

Quick Answer: Organic discharge → microbes consume DO (k_d) while atmosphere replenishes it (k_a). The Streeter-Phelps equation predicts the DO sag — find minimum DO and distance to critical point.

Water quality modeling links wastewater treatment performance to receiving stream health . Streeter-Phelps is the classic river DO model on the FE exam.

BOD Kinetics Review

First-order BOD exertion: d L d t = − k d L ⇒ B O D t = L 0 ( 1 − e − k d t ) \frac{dL}{dt} = -k_d L \quad \Rightarrow \quad BOD_t = L_0 (1 - e^{-k_d t}) d t d L ​ = − k d ​ L ⇒ BO D t ​ = L 0 ​ ( 1 − e − k d ​ t )

  • Term Meaning
  • L₀ Ultimate BOD (mg/L)
  • k_d Base e deoxygenation rate (day⁻¹ typical)
  • BOD₅ BOD at 5 days — standard lab test

Temperature correction: k d , T = k d , 20 θ ( T − 20 ) k_{d,T} = k_{d,20} \, \theta^{(T-20)} k d , T ​ = k d , 20 ​ θ ( T − 20 ) with θ ≈ 1.047 (use problem value).

Dissolved Oxygen Balance

Deoxygenation consumes DO proportional to remaining BOD. Reaeration transfers O₂ across air-water interface when DO < saturation C_s.

DO deficit D = C_s − DO.

Streeter-Phelps Equation (Conceptual Form)

Handbook provides the full equation for DO or deficit as function of travel time t (or distance x if velocity u known): D = k d L 0 k a − k d ( e − k d t − e − k a t ) + D 0 e − k a t D = \frac{k_d L_0}{k_a - k_d}\left(e^{-k_d t} - e^{-k_a t}\right) + D_0 e^{-k_a t} D = k a ​ − k d ​ k d ​ L 0 ​ ​ ( e − k d ​ t − e − k a ​ t ) + D 0 ​ e − k a ​ t

Requires k_a ≠ k_d . Initial deficit D₀ from mixing of effluent and river.

Mixing at the Outfall C m = Q w C w + Q r C r Q w + Q r C_m = \frac{Q_w C_w + Q_r C_r}{Q_w + Q_r} C m ​ = Q w ​ + Q r ​ Q w ​ C w ​ + Q r ​ C r ​ ​

Same for BOD and DO after temperature adjustment if needed. Complete mixing assumed at outfall cross-section.

Worked example: River Q_r = 50 m³/s, DO_r = 8.0 mg/L; effluent Q_w = 2 m³/s, DO_w = 2.0 mg/L. D O m = 50 × 8 + 2 × 2 52 = 404 52 = 7.77 mg/L DO_m = \frac{50 \times 8 + 2 \times 2}{52} = \frac{404}{52} = 7.77 \text{ mg/L} D O m ​ = 52 50 × 8 + 2 × 2 ​ = 52 404 ​ = 7.77 mg/L

If effluent BOD is high, deficit rises even if DO mixing looks acceptable.

  • Critical Point
  • Minimum DO (maximum deficit) occurs where: d D d t = 0 \frac{dD}{dt} = 0 d t d D ​ = 0

Time to critical point t_c solves a transcendental equation — Handbook may give simplified form or ask qualitative which factor lowers minimum DO .

Factors lowering minimum DO:

  • Higher L₀ (more BOD)
  • Lower k_a (slow reaeration — sluggish deep pools)
  • Higher k_d (faster exertion)
  • Low initial DO or high temperature (lower C_s)
  • Reaeration Coefficient k_a

Empirical formulas relate k_a to depth, velocity, wind — exam supplies k_a or asks trend. Riffles and dams increase k_a.

Standards and Wasteload Allocation

State water quality standards set minimum DO (e.g., 5 mg/L for cold water fisheries). Wasteload allocation limits effluent BOD/CBOD so modeled sag complies.

Extensions (Conceptual)

Nitrogenous BOD — nitrification adds delayed oxygen demand.

Photosynthesis — daytime O₂ production in shallow eutrophic streams.

Salinity — affects C_s.

FE usually tests classic carbonaceous BOD sag.

Modeling Steps on Exam

Mix effluent and river → L₀ mix, DO_mix, D₀.

Get k_d at river temperature; use given k_a.

Apply Streeter-Phelps at distance or time of interest.

Compare DO to standard.

Exam trap: Using BOD₅ as L₀ without conversion — L₀ exceeds BOD₅ unless problem states they are equal.

Exam trap: Forgetting saturation DO decreases with temperature — warmer river lowers C_s.

Streeter-Phelps connects treatment design to permit limits — know the sag shape and what deepens the trough.

Carbonaceous vs. Nitrogenous BOD

CBOD exertion dominates initial sag; NBOD from nitrification adds second oxygen demand plateau days downstream. nBOD control with longer SRT in WWTP reduces river oxygen debt.

Temperature and k_d k d , T = k d , 20 θ T − 20 k_{d,T} = k_{d,20} \theta^{T-20} k d , T ​ = k d , 20 ​ θ T − 20

Use stem θ. Warmer streams exert BOD faster — deeper sag if load unchanged.

Reaeration Enhancement

Weirs, cascades, and riffles increase k_a. Dams may reduce k_a in impoundments while improving settling — tradeoffs in river restoration design.

Permit Linkage

Effluent limits on CBOD5 and ammonia protect receiving water DO. Model with mixed-flow L₀ and temperature-corrected constants before costly plant upgrades.

Dissolved Oxygen Saturation

C_s decreases with temperature and salinity — estuarine modeling uses salinity-adjusted saturation tables. Percent saturation = DO/C_s × 100% for biological assessment.

Assimilative Capacity

Assimilative capacity is remaining pollutant load a stream can accept without violating standards — basis for wasteload allocation in TMDLs linking directly to Streeter-Phelps results. On the FE Environmental exam, confirm units before substituting into handbook equations; distractors often differ only by conversion factors. Practice locating handbook sections by keyword during timed drills so lookup takes under one minute.

Full Mixing + Deficit Example

River: Q_r = 30 m³/s, DO_r = 8.2 mg/L, T = 20°C, C_s = 9.1 mg/L. Effluent: Q_w = 1.5 m³/s, L₀,w = 80 mg/L, DO_w = 1.0 mg/L, k_d = 0.23 day⁻¹, k_a = 0.4 day⁻¹.

Mixed L₀ = (1.5×80)/31.5 = 3.81 mg/L. Mixed DO = (30×8.2 + 1.5×1)/31.5 = 7.85 mg/L. D₀ = 9.1 - 7.85 = 1.25 mg/L.

At t = 2 days downstream (u = 0.5 m/s → x = 86.4 km if needed), plug into Streeter-Phelps for deficit D(t) and convert DO = C_s - D. Minimum DO typically occurs where deoxygenation rate equals reaeration rate — exam may supply graph and ask which discharge scenario violates 5 mg/L standard.

BOD₅ to L₀ Conversion

If problem states BOD₅ = 60 mg/L at k_d = 0.2 day⁻¹: L 0 = B O D 5 1 − e − 5 k d = 60 1 − e − 1 = 60 0.632 = 95 mg/L L_0 = \frac{BOD_5}{1 - e^{-5k_d}} = \frac{60}{1 - e^{-1}} = \frac{60}{0.632} = 95\text{ mg/L} L 0 ​ = 1 − e − 5 k d ​ BO D 5 ​ ​ = 1 − e − 1 60 ​ = 0.632 60 ​ = 95 mg/L

Using BOD₅ directly as L₀ underestimates sag depth by ~37% in this case.