Study guide

Acids, Bases, and pH

FE Fundamentals of Engineering Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction to the FE Exam

About the FE Exam FE Exam Study Strategies Navigating the FE Reference Handbook

2 Mathematics (8–12 Questions)

Analytic Geometry and Trigonometry Single-Variable Calculus Differential Equations Linear Algebra and Matrix Operations Numerical Methods

3 Probability and Statistics (6–9 Questions)

Probability Fundamentals Probability Distributions Statistical Estimation and Hypothesis Testing

4 Chemistry (5–8 Questions)

Chemical Reactions and Stoichiometry Acids, Bases, and pH Oxidation-Reduction and Corrosion

5 Ethics and Professional Practice (5–8 Questions)

Engineering Ethics Fundamentals

6 Engineering Economics (6–9 Questions)

Time Value of Money Economic Analysis Methods

7 Statics (9–14 Questions)

Force Systems and Equilibrium Trusses, Frames, and Machines Centroids and Moments of Inertia Static Friction

8 Dynamics (9–14 Questions)

Particle Kinematics Kinetics: Force, Mass, and Acceleration Work, Energy, Impulse, and Momentum Rigid-Body Rotation and Mechanical Vibrations

9 Strength of Materials (9–14 Questions)

Stress and Strain Fundamentals Beam Analysis: Shear and Moment Diagrams Bending Stress and Torsion Stress Transformation and Material Failure

10 Materials Science (6–9 Questions)

Material Properties and Selection Phase Diagrams and Alloy Systems

11 Fluid Mechanics (12–18 Questions)

Fluid Properties and Statics Fluid Dynamics and Bernoulli's Equation Pumps, Turbines, and Flow Measurement

12 Thermodynamics and Heat Transfer (9–14 Questions)

Laws of Thermodynamics and Properties Thermodynamic Cycles and Applications Heat Transfer: Conduction, Convection, and Radiation

13 Basic Electrical Engineering (6–9 Questions)

Electrical Fundamentals and DC Circuits AC Circuits and Three-Phase Power

14 Safety, Health, and Environment (6–9 Questions)

Industrial Safety and Hazard Management

15 Instrumentation and Controls (4–6 Questions)

Sensors, Data Acquisition, and Control Systems

16 Computational Tools and Computer Science

Spreadsheets, Structured Programming, and Flowcharts

Acids, Bases, and pH

Key Takeaways Explain This Topic AI

pH = −log[H⁺] and pOH = −log[OH⁻]; at 25 °C, pH + pOH = 14 and [H⁺][OH⁻] = Kw = 1.0 × 10⁻¹⁴.

Strong acids (HCl, HNO₃, H₂SO₄, HClO₄) and strong bases (NaOH, KOH) dissociate completely, so [H⁺] or [OH⁻] equals the concentration.

Weak acids/bases dissociate partially; strength is measured by Ka or Kb, and Ka × Kb = Kw for a conjugate pair.

A buffer (weak acid + conjugate base) resists pH change; the Henderson–Hasselbalch equation gives pH = pKa + log([A⁻]/[HA]).

Buffer capacity is greatest when [A⁻] = [HA], where pH = pKa.

Neutralization (acid + base → salt + water) reaches equivalence when MₐVₐ = M_bV_b (adjust for polyprotic acids/bases).

Last updated: June 2026

The pH Scale

Acidity is quantified by hydrogen-ion concentration: pH = − log ⁡ [ H + ] pOH = − log ⁡ [ O H − ] \text{pH} = -\log[H^+] \qquad \text{pOH} = -\log[OH^-] pH = − lo g [ H + ] pOH = − lo g [ O H − ]

At 25 °C, water self-ionizes so that [H⁺][OH⁻] = Kw = 1.0 × 10⁻¹⁴ , giving pH + pOH = 14 . Because the scale is logarithmic, each pH unit is a 10× change in [H⁺]: a pH-2 solution is 1,000× more acidic than pH 5.

  • pH range Classification
  • 0–3 Strongly acidic
  • 3–6 Weakly acidic
  • 7 Neutral
  • 8–11 Weakly basic
  • 11–14 Strongly basic
  • Acid–Base Definitions

Three definitions appear on the exam. An Arrhenius acid produces H⁺ in water and an Arrhenius base produces OH⁻. The broader Brønsted–Lowry definition calls an acid a proton (H⁺) donor and a base a proton acceptor, which introduces the idea of conjugate pairs : when HA donates a proton it becomes its conjugate base A⁻. The most general Lewis definition calls an acid an electron-pair acceptor and a base an electron-pair donor. For most FE problems the Brønsted–Lowry view is sufficient — track where the proton goes.

Strong Acids and Bases

Strong acids dissociate completely: HCl, HBr, HI, HNO₃, H₂SO₄, HClO₄. For a monoprotic strong acid, [H⁺] = the acid concentration.

Worked example: 0.001 M HCl → [H⁺] = 10⁻³ → pH = −log(10⁻³) = 3.0 .

Strong bases also fully dissociate: NaOH, KOH, Ca(OH)₂, Ba(OH)₂. For NaOH, [OH⁻] = concentration; for Ca(OH)₂ multiply by 2 (two OH⁻ per formula unit).

Worked example: 0.001 M NaOH → [OH⁻] = 10⁻³ → pOH = 3.0 → pH = 14 − 3 = 11.0 .

Trap: A 0.001 M Ca(OH)₂ solution has [OH⁻] = 0.002 M, so pOH = 2.70 and pH = 11.30 — don't forget the factor of 2.

Weak Acids and Bases

Weak acids/bases dissociate only partially. For HA ⇌ H⁺ + A⁻: K a = [ H + ] [ A − ] [ H A ] K_a = \frac{[H^+][A^-]}{[HA]} K a ​ = [ H A ] [ H + ] [ A − ] ​

Smaller Ka means weaker. For a conjugate acid–base pair, Ka × Kb = Kw = 1.0 × 10⁻¹⁴ . To estimate [H⁺] of a weak acid of concentration C, use [H⁺] ≈ √(Ka·C) (valid when dissociation < ~5%).

Worked example: 0.10 M acetic acid (Ka = 1.8 × 10⁻⁵): [H⁺] ≈ √(1.8×10⁻⁵ × 0.10) = √(1.8×10⁻⁶) = 1.34×10⁻³ → pH = −log(1.34×10⁻³) ≈ 2.87 .

Buffer Solutions

A buffer resists pH change on adding small amounts of acid/base. It contains a weak acid and its conjugate base (e.g., CH₃COOH / CH₃COO⁻) or a weak base and its conjugate acid (NH₃ / NH₄⁺). The pH is given by the Henderson–Hasselbalch equation : pH = p K a + log ⁡ [ A − ] [ H A ] \text{pH} = \text{p}K_a + \log\frac{[A^-]}{[HA]} pH = p K a ​ + lo g [ H A ] [ A − ] ​

Worked example: 0.10 M acetic acid (Ka = 1.8 × 10⁻⁵, pKa = 4.74) + 0.15 M sodium acetate: pH = 4.74 + log(0.15/0.10) = 4.74 + 0.18 = 4.92 .

Buffer capacity peaks when [A⁻] = [HA] , at which point the log term is zero and pH = pKa . Choose a buffer whose pKa is within ±1 of the target pH. Biological and process buffers (phosphate, bicarbonate, acetate) all exploit this principle, and adding a strong acid simply converts some A⁻ back to HA without a large pH swing until the buffer is exhausted.

Weak Base Example

Weak bases work symmetrically. For ammonia, NH₃ + H₂O ⇌ NH₄⁺ + OH⁻ with Kb = 1.8 × 10⁻⁵. For a 0.10 M NH₃ solution, [OH⁻] ≈ √(Kb·C) = √(1.8×10⁻⁵ × 0.10) = 1.34×10⁻³ M, so pOH = 2.87 and pH = 14 − 2.87 = 11.13 . Note the symmetry with the acetic-acid acid example: identical Ka and Kb magnitudes give pH values that are mirror images about 7. The relation Ka × Kb = Kw lets you convert a weak acid's Ka into its conjugate base's Kb (and vice versa) — for the acetate/acetic-acid pair, Kb(acetate) = 10⁻¹⁴/(1.8×10⁻⁵) = 5.6 × 10⁻¹⁰.

Neutralization and Titration

Acid + base → salt + water. At the equivalence point , moles H⁺ = moles OH⁻: M a V a = M b V b M_a V_a = M_b V_b M a ​ V a ​ = M b ​ V b ​

Worked example: mL of 0.50 M NaOH to neutralize 25 mL of 0.30 M HCl: V_b = (0.30 × 25)/0.50 = 15 mL .

  • Titration type pH at equivalence
  • Strong acid + strong base 7 (neutral salt)
  • Weak acid + strong base > 7 (basic salt)
  • Strong acid + weak base < 7 (acidic salt)

For polyprotic acids (H₂SO₄, H₃PO₄), multiply the acid concentration by the number of acidic protons when finding equivalence.

Worked Titration Walkthrough

Titrate 50.0 mL of 0.100 M acetic acid (Ka = 1.8 × 10⁻⁵, pKa = 4.74) with 0.100 M NaOH. Initial moles of acid = 0.0500 L × 0.100 M = 5.00 × 10⁻³ mol. By M_aV_a = M_bV_b, the equivalence point needs V_b = (0.100 × 50.0)/0.100 = 50.0 mL of NaOH.

Half-equivalence (25.0 mL added): half the acid is converted to acetate, so [A⁻] = [HA] and pH = pKa = 4.74 . This is the standard way to read a weak acid's pKa straight off a titration curve.

Equivalence point (50.0 mL added): all acid is now acetate. The solution is not neutral — acetate (the conjugate base of a weak acid) hydrolyzes water, giving a pH above 7 (typically ≈ 8.7 here once dilution to 100 mL total is accounted for).

The table below summarizes equivalence-point pH by titration class:

  • Titration class Equivalence pH Reason
  • Strong acid + strong base = 7 Salt does not hydrolyze
  • Weak acid + strong base > 7 Conjugate base is basic
  • Strong acid + weak base < 7 Conjugate acid is acidic

A suitable indicator changes color near the equivalence pH: phenolphthalein (≈ 8–10) suits weak-acid/strong-base titrations, while methyl orange (≈ 3–4.5) suits strong-acid/weak-base titrations. Choosing the indicator to match the equivalence pH minimizes titration error.