Study guide
Chemical Reactions and Stoichiometry
FE Fundamentals of Engineering Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction to the FE Exam
About the FE Exam FE Exam Study Strategies Navigating the FE Reference Handbook
2 Mathematics (8–12 Questions)
Analytic Geometry and Trigonometry Single-Variable Calculus Differential Equations Linear Algebra and Matrix Operations Numerical Methods
3 Probability and Statistics (6–9 Questions)
Probability Fundamentals Probability Distributions Statistical Estimation and Hypothesis Testing
4 Chemistry (5–8 Questions)
Chemical Reactions and Stoichiometry Acids, Bases, and pH Oxidation-Reduction and Corrosion
5 Ethics and Professional Practice (5–8 Questions)
Engineering Ethics Fundamentals
6 Engineering Economics (6–9 Questions)
Time Value of Money Economic Analysis Methods
7 Statics (9–14 Questions)
Force Systems and Equilibrium Trusses, Frames, and Machines Centroids and Moments of Inertia Static Friction
8 Dynamics (9–14 Questions)
Particle Kinematics Kinetics: Force, Mass, and Acceleration Work, Energy, Impulse, and Momentum Rigid-Body Rotation and Mechanical Vibrations
9 Strength of Materials (9–14 Questions)
Stress and Strain Fundamentals Beam Analysis: Shear and Moment Diagrams Bending Stress and Torsion Stress Transformation and Material Failure
10 Materials Science (6–9 Questions)
Material Properties and Selection Phase Diagrams and Alloy Systems
11 Fluid Mechanics (12–18 Questions)
Fluid Properties and Statics Fluid Dynamics and Bernoulli's Equation Pumps, Turbines, and Flow Measurement
12 Thermodynamics and Heat Transfer (9–14 Questions)
Laws of Thermodynamics and Properties Thermodynamic Cycles and Applications Heat Transfer: Conduction, Convection, and Radiation
13 Basic Electrical Engineering (6–9 Questions)
Electrical Fundamentals and DC Circuits AC Circuits and Three-Phase Power
14 Safety, Health, and Environment (6–9 Questions)
Industrial Safety and Hazard Management
15 Instrumentation and Controls (4–6 Questions)
Sensors, Data Acquisition, and Control Systems
16 Computational Tools and Computer Science
Spreadsheets, Structured Programming, and Flowcharts
Chemical Reactions and Stoichiometry
Key Takeaways Explain This Topic AI
One mole = 6.022 × 10²³ particles (Avogadro's number); molar mass in g/mol equals the atomic/molecular weight.
A balanced equation conserves atoms of every element; stoichiometry then uses its mole ratios to relate reactant and product quantities.
The ideal gas law PV = nRT links moles, pressure, volume, and temperature (T in kelvin); use R = 8.314 J/mol·K or 0.08206 L·atm/mol·K.
The limiting reagent is the reactant that produces the least product and is consumed first; it fixes the theoretical yield.
Percent yield = (actual ÷ theoretical) × 100%; equilibrium constant K = [products]ᶜ ÷ [reactants]ᵃ with stoichiometric exponents.
Periodic-table trends and atomic structure (protons, neutrons, electrons) underlie bonding, valence, and reactivity.
Last updated: September 2026
FE Exam Weight: Chemistry contributes 5–8 questions (~6% of the 110-question FE Other Disciplines exam). Most are quick plug-and-chug problems. The exam is open to the searchable NCEES FE Reference Handbook , so the constants (Avogadro's number, R, molar volume) and equation forms are provided — your job is to FIND the right relation and APPLY it without unit errors.
Atomic Structure and the Periodic Table
An atom has a nucleus of protons (charge +1, define the element via atomic number Z) and neutrons (neutral), surrounded by electrons (charge −1). A neutral atom has electrons = protons. Isotopes share Z but differ in neutron count, so atomic weights on the table are weighted averages of isotope masses.
The periodic table organizes elements by increasing Z. Key trends moving left→right across a period : atomic radius decreases, ionization energy and electronegativity increase. Moving top→bottom down a group : radius increases, ionization energy decreases. Valence electrons (outermost shell) determine bonding behavior — group 1 (alkali metals) lose one electron, group 17 (halogens) gain one, group 18 (noble gases) are inert.
- Particle Charge Relative mass Location
- Proton +1 1 amu Nucleus
- Neutron 0 1 amu Nucleus
- Electron −1 ~1/1836 amu Orbitals
- Chemical Bonding
- Bond type How it forms Example
- Ionic Electron transfer (metal + nonmetal) NaCl
- Covalent Electron sharing (nonmetals) H₂O, CO₂
- Metallic Delocalized electron sea Cu, Fe
Electronegativity difference (ΔEN) predicts bond character: ΔEN > ~1.7 → ionic; 0.4–1.7 → polar covalent; < 0.4 → nonpolar covalent. Polar molecules (asymmetric charge, like H₂O) dissolve ionic and polar solutes ("like dissolves like").
Electrons fill orbitals (s, p, d, f) by increasing energy; the outermost shell holds the valence electrons that drive reactivity. Atoms tend to gain, lose, or share electrons to reach a stable octet (eight valence electrons), which explains why sodium (one valence electron) readily forms Na⁺ and chlorine (seven) forms Cl⁻. Molar mass is the mass of one mole of a substance. To calculate it from a chemical formula, add the atomic masses of its constituent atoms, multiplying each atomic mass by the corresponding subscript; report the result in g/mol. You will compute molecular weights constantly, so reading them off the periodic table quickly is essential.
Solutions and Concentration
Most FE chemistry happens in aqueous solution, so concentration units matter:
- Unit Definition
- Molarity (M) moles of solute ÷ liters of solution
- Molality (m) moles of solute ÷ kg of solvent
- Mass fraction / wt% mass solute ÷ total mass × 100
- Mole fraction (x) moles of component ÷ total moles
- ppm mg solute per L (dilute aqueous)
A dilution preserves moles of solute: M₁V₁ = M₂V₂ . To make 500 mL of 0.10 M HCl from 2.0 M stock: V₁ = M₂V₂/M₁ = (0.10 × 500)/2.0 = 25 mL of stock diluted to 500 mL. Mixing up molarity (per liter of solution ) and molality (per kg of solvent ) is a frequent trap.
The Mole Concept
- Quantity Value
- Avogadro's number (Nₐ) 6.022 × 10²³ particles/mol
- Molar mass numerically equal to atomic/molecular weight, in g/mol
- STP 0 °C (273.15 K) and 1 atm
- Molar volume of ideal gas at STP 22.4 L/mol
Convert with: moles = mass (g) ÷ molar mass (g/mol), and particles = moles × 6.022 × 10²³.
Balancing Equations
Mass is conserved — each element's atom count must match on both sides. Balance Fe₂O₃ + CO → Fe + CO₂ : set Fe to 2 (→ 2Fe), then balance C and O. Result: Fe₂O₃ + 3CO → 2Fe + 3CO₂ (Fe 2=2, C 3=3, O 6=6 ✓).
Worked Stoichiometry Example
How many grams of CO₂ form when 100 g of propane (C₃H₈, MW = 44.1) burns completely?
- Balanced: C₃H₈ + 5O₂ → 3CO₂ + 4H₂O
- Moles C₃H₈ = 100 ÷ 44.1 = 2.268 mol
- Mole ratio = 3 mol CO₂ per 1 mol C₃H₈
- Moles CO₂ = 2.268 × 3 = 6.804 mol
- Mass CO₂ = 6.804 × 44.0 = ≈ 299 g
- The Ideal Gas Law P V = n R T PV = nRT P V = n RT
Variables: P = absolute pressure, V = volume, n = moles, T = absolute temperature in kelvin (a near-universal trap — never use °C), R = universal gas constant. Pick R to match units:
- R value Units
- 0.08206 L·atm/(mol·K)
- 8.314 J/(mol·K) = Pa·m³/(mol·K)
- 10.73 psia·ft³/(lbmol·°R)
Example: Volume of 2.0 mol of an ideal gas at 300 K and 2.0 atm: V = nRT/P = (2.0)(0.08206)(300)/2.0 = 24.6 L . Combined-gas shortcut for a fixed amount of gas: P₁V₁/T₁ = P₂V₂/T₂.
Limiting Reagent, Yield, and Equilibrium
The limiting reagent runs out first. Compute how much product each reactant alone could make; the smallest controls theoretical yield . Then percent yield = (actual ÷ theoretical) × 100% .
For a reversible reaction aA + bB ⇌ cC + dD, the equilibrium constant is K = ([C]ᶜ[D]ᵈ)/([A]ᵃ[B]ᵇ). K ≫ 1 favors products; K ≪ 1 favors reactants. Le Chatelier's principle: a disturbed equilibrium shifts to oppose the change — adding reactant or removing product shifts right; increasing pressure shifts toward fewer gas moles; raising temperature shifts an exothermic reaction left (toward reactants).
Limiting Reactant and Percent Yield
Real stoichiometry problems hinge on the limiting reactant — the species that runs out first and caps the product. Convert each reactant to moles, divide by its coefficient, and the smallest ratio identifies the limiter; the others are in excess.
Worked Example
For N₂ + 3H₂ → 2NH₃, mixing 2 mol N₂ with 3 mol H₂: N₂ ratio 2/1 = 2, H₂ ratio 3/3 = 1. Hydrogen is limiting, so it makes 3·(2/3) = 2 mol NH₃, leaving N₂ in excess.
Percent yield = (actual / theoretical) × 100%, always ≤ 100% because of side reactions and losses. The ideal gas law PV = nRT (R = 8.314 J/mol·K) converts gas volumes to moles; at standard conditions one mole of ideal gas occupies 22.4 L. Balancing equations first — conserving every atom — is the prerequisite to every mole calculation.