Study guide

Work, Energy, Impulse, and Momentum

FE Fundamentals of Engineering Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction to the FE Exam

About the FE Exam FE Exam Study Strategies Navigating the FE Reference Handbook

2 Mathematics (8–12 Questions)

Analytic Geometry and Trigonometry Single-Variable Calculus Differential Equations Linear Algebra and Matrix Operations Numerical Methods

3 Probability and Statistics (6–9 Questions)

Probability Fundamentals Probability Distributions Statistical Estimation and Hypothesis Testing

4 Chemistry (5–8 Questions)

Chemical Reactions and Stoichiometry Acids, Bases, and pH Oxidation-Reduction and Corrosion

5 Ethics and Professional Practice (5–8 Questions)

Engineering Ethics Fundamentals

6 Engineering Economics (6–9 Questions)

Time Value of Money Economic Analysis Methods

7 Statics (9–14 Questions)

Force Systems and Equilibrium Trusses, Frames, and Machines Centroids and Moments of Inertia Static Friction

8 Dynamics (9–14 Questions)

Particle Kinematics Kinetics: Force, Mass, and Acceleration Work, Energy, Impulse, and Momentum Rigid-Body Rotation and Mechanical Vibrations

9 Strength of Materials (9–14 Questions)

Stress and Strain Fundamentals Beam Analysis: Shear and Moment Diagrams Bending Stress and Torsion Stress Transformation and Material Failure

10 Materials Science (6–9 Questions)

Material Properties and Selection Phase Diagrams and Alloy Systems

11 Fluid Mechanics (12–18 Questions)

Fluid Properties and Statics Fluid Dynamics and Bernoulli's Equation Pumps, Turbines, and Flow Measurement

12 Thermodynamics and Heat Transfer (9–14 Questions)

Laws of Thermodynamics and Properties Thermodynamic Cycles and Applications Heat Transfer: Conduction, Convection, and Radiation

13 Basic Electrical Engineering (6–9 Questions)

Electrical Fundamentals and DC Circuits AC Circuits and Three-Phase Power

14 Safety, Health, and Environment (6–9 Questions)

Industrial Safety and Hazard Management

15 Instrumentation and Controls (4–6 Questions)

Sensors, Data Acquisition, and Control Systems

16 Computational Tools and Computer Science

Spreadsheets, Structured Programming, and Flowcharts

Work, Energy, Impulse, and Momentum

Key Takeaways Explain This Topic AI

The work-energy principle ΣW = ΔKE replaces force-acceleration analysis when a problem links speed to distance, bypassing time and acceleration.

Kinetic energy is ½mv² (translation) plus ½Iω² (rotation); potential energy is mgh (gravity) and ½kx² (springs).

Mechanical energy is conserved (KE₁ + PE₁ = KE₂ + PE₂) only when no non-conservative force such as friction does work.

Linear impulse equals change in momentum: ∫F dt = mΔv, the right tool when force acts over a known time (impacts, thrust).

Momentum is conserved in collisions with no external impulse; the coefficient of restitution e (0 to 1) sets the velocity of separation.

An undamped spring-mass system vibrates at ωn = √(k/m); period T = 2π√(m/k), and a simple pendulum gives ωn = √(g/L).

Last updated: June 2026

Work and Kinetic Energy

The work done by a force over a displacement is the dot product: W = F ⃗ ⋅ d ⃗ = F d cos ⁡ θ W = \vec{F}\cdot\vec{d} = Fd\cos\theta W = F ⋅ d = F d cos θ

where θ is the angle between force and displacement. A force perpendicular to motion (θ = 90°) does no work — this is why the normal force and centripetal force never change kinetic energy.

  • Force vs. displacement Work
  • Same direction (0°) +Fd
  • Perpendicular (90°) 0
  • Opposite (180°) −Fd

The work-energy principle states that net work equals the change in kinetic energy: ∑ W = Δ K E = 1 2 m v 2 2 − 1 2 m v 1 2 \sum W = \Delta KE = \tfrac{1}{2}mv_2^2 - \tfrac{1}{2}mv_1^2 ∑ W = Δ K E = 2 1 ​ m v 2 2 ​ − 2 1 ​ m v 1 2 ​

(add ½Iω² terms for rotating bodies). This is the method of choice when a problem connects speed to distance without asking about time, since it sidesteps acceleration entirely.

Worked Example — Work-Energy

A 1000 kg car decelerates from 20 m/s to rest. The kinetic energy that the brakes must dissipate is: Δ K E = 1 2 ( 1000 ) ( 20 ) 2 = 1 2 ( 1000 ) ( 400 ) = 200,000 J = 200 kJ \Delta KE = \tfrac{1}{2}(1000)(20)^2 = \tfrac{1}{2}(1000)(400) = 200{,}000\text{ J} = 200\text{ kJ} Δ K E = 2 1 ​ ( 1000 ) ( 20 ) 2 = 2 1 ​ ( 1000 ) ( 400 ) = 200 , 000 J = 200 kJ

If the braking distance is 40 m, the average braking force is F = ΔKE/d = 200{,}000/40 = 5000 N — found in one step with no need for acceleration.

Potential Energy, Conservation, and Power

Potential energy comes in two forms tested on the FE exam:

Gravitational: PE = mgh, with h measured from a chosen datum.

Elastic (spring): PE = ½kx², with x the deformation from the spring's free length.

When only conservative forces (gravity, springs) do work, mechanical energy is conserved: K E 1 + P E 1 = K E 2 + P E 2 KE_1 + PE_1 = KE_2 + PE_2 K E 1 ​ + P E 1 ​ = K E 2 ​ + P E 2 ​ 1 2 m v 1 2 + m g h 1 + 1 2 k x 1 2 = 1 2 m v 2 2 + m g h 2 + 1 2 k x 2 2 \tfrac{1}{2}mv_1^2 + mgh_1 + \tfrac{1}{2}kx_1^2 = \tfrac{1}{2}mv_2^2 + mgh_2 + \tfrac{1}{2}kx_2^2 2 1 ​ m v 1 2 ​ + m g h 1 ​ + 2 1 ​ k x 1 2 ​ = 2 1 ​ m v 2 2 ​ + m g h 2 ​ + 2 1 ​ k x 2 2 ​

If friction or another non-conservative force acts, add its work as an energy loss: KE₁ + PE₁ − W_friction = KE₂ + PE₂.

Power

Power is the rate of doing work: P = d W d t = F ⃗ ⋅ v ⃗ = F v cos ⁡ θ , P r o t = T ω P = \frac{dW}{dt} = \vec{F}\cdot\vec{v} = Fv\cos\theta, \qquad P_{rot} = T\omega P = d t d W ​ = F ⋅ v = F v cos θ , P ro t ​ = T ω

  • Unit Equivalent
  • 1 watt (W) 1 J/s = 1 N·m/s
  • 1 horsepower (hp) 745.7 W = 550 ft·lb/s

Trap: Use conservation of energy only when no friction or applied non-conservative force does work. A block sliding down a rough ramp loses energy to friction, so KE₁ + PE₁ does not equal KE₂ + PE₂ — you must subtract the friction work μN·d.

Impulse, Momentum, and Collisions

Linear momentum is p = mv. The impulse-momentum principle integrates force over time: ∫ t 1 t 2 F ⃗ d t = m v ⃗ 2 − m v ⃗ 1 \int_{t_1}^{t_2}\vec{F}\,dt = m\vec{v}_2 - m\vec{v}_1 ∫ t 1 ​ t 2 ​ ​ F d t = m v 2 ​ − m v 1 ​

For a constant force, F·Δt = mΔv. This is the right tool when a force acts over a known time interval — impacts, jet thrust, a bat striking a ball.

Conservation of momentum holds when no external impulse acts on the system: m 1 v 1 + m 2 v 2 = m 1 v 1 ′ + m 2 v 2 ′ m_1 v_1 + m_2 v_2 = m_1 v_1' + m_2 v_2' m 1 ​ v 1 ​ + m 2 ​ v 2 ​ = m 1 ​ v 1 ′ ​ + m 2 ​ v 2 ′ ​

Coefficient of Restitution

For collisions, the coefficient of restitution e relates separation speed to approach speed: ≠ = v 2 ′ − v 1 ′ v 1 − v 2 = relative velocity of separation relative velocity of approach \ne = \frac{v_2' - v_1'}{v_1 - v_2} = \frac{\text{relative velocity of separation}}{\text{relative velocity of approach}}  = = v 1 ​ − v 2 ​ v 2 ′ ​ − v 1 ′ ​ ​ = relative velocity of approach relative velocity of separation ​

  • e Collision Energy
  • 1 Perfectly elastic KE conserved
  • 0 < e < 1 Inelastic Some KE lost
  • 0 Perfectly plastic (stick together) Maximum KE lost

For a perfectly plastic collision (e = 0) the bodies move together: m₁v₁ + m₂v₂ = (m₁ + m₂)v′.

Worked Example — Plastic Collision

A 2 kg ball at 10 m/s strikes a 3 kg ball at rest and they stick: v ′ = m 1 v 1 + m 2 v 2 m 1 + m 2 = 2 ( 10 ) + 3 ( 0 ) 5 = 20 5 = 4 m/s v' = \frac{m_1 v_1 + m_2 v_2}{m_1 + m_2} = \frac{2(10) + 3(0)}{5} = \frac{20}{5} = 4\text{ m/s} v ′ = m 1 ​ + m 2 ​ m 1 ​ v 1 ​ + m 2 ​ v 2 ​ ​ = 5 2 ( 10 ) + 3 ( 0 ) ​ = 5 20 ​ = 4 m/s

Momentum is conserved even though kinetic energy drops from 100 J to 40 J — the 60 J difference becomes heat and deformation.

Vibrations — Natural Frequency

For an undamped spring-mass system, the natural frequency is: ω n = k m ( rad/s ) , T = 2 π m k , f = 1 2 π k m ( Hz ) \omega_n = \sqrt{\frac{k}{m}}\;(\text{rad/s}), \quad T = 2\pi\sqrt{\frac{m}{k}}, \quad f = \frac{1}{2\pi}\sqrt{\frac{k}{m}}\;(\text{Hz}) ω n ​ = m k ​ ​ ( rad/s ) , T = 2 π k m ​ ​ , f = 2 π 1 ​ m k ​ ​ ( Hz )

For a simple pendulum, ωn = √(g/L). Note ωn (rad/s) and f (Hz) differ by 2π — confusing them is a frequent error.

Choosing Energy vs. Momentum vs. F = ma

The three kinetics methods each fit a different problem type, and picking the right one saves time:

  • Method Use when... Key equation
  • Force–acceleration (ΣF = ma) Acceleration or instantaneous force is wanted ΣF = ma
  • Work–energy Speed is linked to distance; time not needed ΣW = ΔKE
  • Impulse–momentum Force acts over a time interval; impacts ∫F dt = mΔv

For a body falling and compressing a spring, energy methods are fastest (KE + PE balance). For a collision, momentum is essential because the impact force and duration are unknown. For finding a car's acceleration on a grade, ΣF = ma is direct.

Worked Example — Energy Method on a Spring

A 4 kg block slides down a frictionless ramp, dropping 2 m, then compresses a spring (k = 8000 N/m). Find the maximum compression x. Energy conservation: mgh = ½kx² → 4(9.81)(2) = ½(8000)x² → 78.5 = 4000x² → x² = 0.0196 → x = 0.140 m . The block's gravitational PE converts entirely into spring PE at maximum compression, where its velocity is momentarily zero. No time or acceleration calculation is required — the hallmark advantage of the energy method.

Trap — restitution direction: in the e equation, the numerator is the separation velocity (after) and the denominator is the approach velocity (before). Reversing them, or forgetting that e ranges only from 0 to 1, produces impossible results.