Study guide

Fluid Dynamics and Bernoulli's Equation

FE Fundamentals of Engineering Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction to the FE Exam

About the FE Exam FE Exam Study Strategies Navigating the FE Reference Handbook

2 Mathematics (8–12 Questions)

Analytic Geometry and Trigonometry Single-Variable Calculus Differential Equations Linear Algebra and Matrix Operations Numerical Methods

3 Probability and Statistics (6–9 Questions)

Probability Fundamentals Probability Distributions Statistical Estimation and Hypothesis Testing

4 Chemistry (5–8 Questions)

Chemical Reactions and Stoichiometry Acids, Bases, and pH Oxidation-Reduction and Corrosion

5 Ethics and Professional Practice (5–8 Questions)

Engineering Ethics Fundamentals

6 Engineering Economics (6–9 Questions)

Time Value of Money Economic Analysis Methods

7 Statics (9–14 Questions)

Force Systems and Equilibrium Trusses, Frames, and Machines Centroids and Moments of Inertia Static Friction

8 Dynamics (9–14 Questions)

Particle Kinematics Kinetics: Force, Mass, and Acceleration Work, Energy, Impulse, and Momentum Rigid-Body Rotation and Mechanical Vibrations

9 Strength of Materials (9–14 Questions)

Stress and Strain Fundamentals Beam Analysis: Shear and Moment Diagrams Bending Stress and Torsion Stress Transformation and Material Failure

10 Materials Science (6–9 Questions)

Material Properties and Selection Phase Diagrams and Alloy Systems

11 Fluid Mechanics (12–18 Questions)

Fluid Properties and Statics Fluid Dynamics and Bernoulli's Equation Pumps, Turbines, and Flow Measurement

12 Thermodynamics and Heat Transfer (9–14 Questions)

Laws of Thermodynamics and Properties Thermodynamic Cycles and Applications Heat Transfer: Conduction, Convection, and Radiation

13 Basic Electrical Engineering (6–9 Questions)

Electrical Fundamentals and DC Circuits AC Circuits and Three-Phase Power

14 Safety, Health, and Environment (6–9 Questions)

Industrial Safety and Hazard Management

15 Instrumentation and Controls (4–6 Questions)

Sensors, Data Acquisition, and Control Systems

16 Computational Tools and Computer Science

Spreadsheets, Structured Programming, and Flowcharts

Fluid Dynamics and Bernoulli's Equation

Key Takeaways Explain This Topic AI

Continuity (mass conservation) for incompressible flow: A₁V₁ = A₂V₂ = Q; halving the diameter quadruples the velocity.

Bernoulli (steady, inviscid, incompressible, along a streamline): p₁/γ + V₁²/2g + z₁ = p₂/γ + V₂²/2g + z₂, each term a head (length).

Reynolds number Re = ρVD/μ = VD/ν sets the regime: laminar Re < 2,300, turbulent Re > 4,000.

The energy equation adds head loss h_L to Bernoulli; Torricelli gives jet velocity V = √(2gh).

Major (friction) loss: h_f = f(L/D)(V²/2g); for laminar flow f = 64/Re, for turbulent use the Moody diagram (Re, ε/D).

Minor losses h_m = K(V²/2g) account for fittings, valves, entrances, and exits.

Last updated: June 2026

Conservation of Mass (Continuity)

For steady, incompressible flow, the volumetric flow rate Q is constant:

A₁V₁ = A₂V₂ = Q (m³/s)

The mass flow rate is ṁ = ρAV = ρQ (kg/s). Because A = πD²/4 for a round pipe, velocity scales with the inverse square of diameter: halve D and V quadruples.

Worked example — continuity in a contraction

Water flows in a pipe narrowing from D₁ = 10 cm to D₂ = 5 cm; V₁ = 2 m/s. Then:

V₂ = V₁ (D₁/D₂)² = 2 × (10/5)² = 2 × 4 = 8 m/s .

Bernoulli's Equation

For steady, inviscid, incompressible flow along a streamline:

p₁/γ + V₁²/2g + z₁ = p₂/γ + V₂²/2g + z₂

Every term has units of length (head) :

  • p/γ = pressure head
  • V²/2g = velocity head
  • z = elevation head

Their sum, the total head, is constant along a streamline. Physically, where velocity rises (a constriction), pressure falls — the basis of venturi meters and airfoil lift.

Applications

Pitot tube (velocity from stagnation pressure): V = √(2(p_stag − p_static)/ρ).

Venturi meter (flow from a constriction's pressure drop): Q = C_d A₂ √[2gΔh / (1 − (A₂/A₁)²)].

Free jet / Torricelli's theorem (tank draining through a hole at depth h): V = √(2gh) — identical to the speed of an object falling from height h.

Worked example — Torricelli

Water exits a tank through a hole 5 m below the surface: V = √(2gh) = √(2 × 9.81 × 5) = √98.1 = 9.9 m/s .

Reynolds Number and Flow Regime

The Reynolds number is the ratio of inertial to viscous forces:

Re = ρVD/μ = VD/ν

  • Re range Regime
  • Re < 2,300 Laminar (smooth, ordered)
  • 2,300 – 4,000 Transitional
  • Re > 4,000 Turbulent (mixing, eddies)
  • Worked example — Reynolds number

Water (ν = 10⁻⁶ m²/s) flows at 1.5 m/s in a 0.1 m pipe:

Re = VD/ν = (1.5)(0.1)/10⁻⁶ = 0.15/10⁻⁶ = 150,000 → fully turbulent.

Other dimensionless numbers

  • Number Formula Ratio of
  • Reynolds ρVL/μ inertia / viscous
  • Froude V/√(gL) inertia / gravity
  • Mach V/c flow speed / sound speed
  • The Energy Equation (Real Pipe Flow)

Real flow loses energy to friction, so Bernoulli gains a head-loss term:

p₁/γ + V₁²/2g + z₁ = p₂/γ + V₂²/2g + z₂ + h_L

where h_L = major (friction) losses + minor (fitting) losses.

  • Major Losses — Darcy-Weisbach
  • h_f = f (L/D)(V²/2g)

f is the Darcy friction factor . For laminar flow it is exact and roughness-independent:

f = 64/Re

For turbulent flow , read f from the Moody diagram using Re and the relative roughness ε/D (or solve the Colebrook equation). Beware the Fanning friction factor, which is ¼ of the Darcy factor — the FE Handbook uses Darcy.

Worked example — Bernoulli with a pressure drop

Water accelerates from V₁ = 2 m/s to V₂ = 8 m/s through a horizontal contraction (z₁ = z₂). With p₁ = 200 kPa, find p₂ (inviscid):

p₂ = p₁ + (γ/2g)(V₁² − V₂²) ... or more directly p₂ = p₁ + ½ρ(V₁² − V₂²) = 200,000 + ½(1,000)(2² − 8²) = 200,000 + 500(4 − 64) = 200,000 − 30,000 = 170 kPa .

The pressure drops 30 kPa as the fluid speeds up — velocity head is bought with pressure head, the core Bernoulli trade-off.

  • Minor Losses (Fittings, Valves, Entrances)
  • h_m = K (V²/2g)

Each fitting has a loss coefficient K:

  • Fitting K (typical)
  • 90° elbow 0.3–1.5
  • Tee (branch flow) 1.0–2.0
  • Gate valve (open) 0.2
  • Globe valve (open) 6–10
  • Sharp entrance 0.5
  • Rounded entrance 0.03–0.1
  • Exit (into reservoir) 1.0
  • Sudden expansion (1 − A₁/A₂)²

Globe valves throttle well but waste head; gate valves are for isolation. Total h_L = Σh_f + Σh_m for the whole line.

Worked example — friction head loss

Water flows at V = 2 m/s through a 100 m pipe of D = 0.05 m with f = 0.02:

h_f = f(L/D)(V²/2g) = 0.02 × (100/0.05) × (2²/(2×9.81)) = 0.02 × 2,000 × 0.204 = 8.2 m of head loss.

Open-Channel Flow

Manning's equation gives velocity in an open channel (SI):

V = (1/n) R_h^(2/3) S^(1/2)

where n is Manning's roughness, R_h = A/P (area/wetted perimeter) is the hydraulic radius, and S is the energy-grade-line slope. The Froude number Fr = V/√(gD_h) classifies the flow: Fr < 1 subcritical (deep, slow), Fr = 1 critical, Fr > 1 supercritical (shallow, fast).

Common Traps

Bernoulli's assumptions. It is inviscid — once friction matters (long pipes), switch to the energy equation with h_L.

f = 64/Re only for laminar flow. For turbulent flow, f needs the Moody diagram.

Velocity head uses V², not V. Doubling velocity quadruples velocity head and friction loss.

Quick reference

Continuity: A₁V₁ = A₂V₂; ṁ = ρQ.

Bernoulli: p/γ + V²/2g + z = const.

Re = VD/ν; laminar <2,300, turbulent >4,000.

h_f = f(L/D)(V²/2g); laminar f = 64/Re. h_m = K(V²/2g).

Continuity, Energy Heads, and Bernoulli Limits

The continuity equation (mass conservation) for incompressible flow is A₁V₁ = A₂V₂: halving the area doubles the velocity. Combined with Bernoulli, this explains why fluid speeds up and pressure drops through a constriction (the venturi effect).

Bernoulli's equation is often written in head form (units of length), each term an energy per unit weight:

  • Term Name
  • p/γ Pressure head
  • V²/2g Velocity head
  • z Elevation head

The sum p/γ + V²/2g + z is constant along a streamline for ideal flow. Bernoulli's assumptions are strict — steady, incompressible, inviscid (frictionless), along a single streamline. Real pipe flow violates the frictionless assumption, so an h_L head-loss term and any pump head h_p are added in the extended (energy) equation. Forgetting that Bernoulli ignores friction is the most common FE misapplication.