Study guide
Fluid Properties and Statics
FE Fundamentals of Engineering Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction to the FE Exam
About the FE Exam FE Exam Study Strategies Navigating the FE Reference Handbook
2 Mathematics (8–12 Questions)
Analytic Geometry and Trigonometry Single-Variable Calculus Differential Equations Linear Algebra and Matrix Operations Numerical Methods
3 Probability and Statistics (6–9 Questions)
Probability Fundamentals Probability Distributions Statistical Estimation and Hypothesis Testing
4 Chemistry (5–8 Questions)
Chemical Reactions and Stoichiometry Acids, Bases, and pH Oxidation-Reduction and Corrosion
5 Ethics and Professional Practice (5–8 Questions)
Engineering Ethics Fundamentals
6 Engineering Economics (6–9 Questions)
Time Value of Money Economic Analysis Methods
7 Statics (9–14 Questions)
Force Systems and Equilibrium Trusses, Frames, and Machines Centroids and Moments of Inertia Static Friction
8 Dynamics (9–14 Questions)
Particle Kinematics Kinetics: Force, Mass, and Acceleration Work, Energy, Impulse, and Momentum Rigid-Body Rotation and Mechanical Vibrations
9 Strength of Materials (9–14 Questions)
Stress and Strain Fundamentals Beam Analysis: Shear and Moment Diagrams Bending Stress and Torsion Stress Transformation and Material Failure
10 Materials Science (6–9 Questions)
Material Properties and Selection Phase Diagrams and Alloy Systems
11 Fluid Mechanics (12–18 Questions)
Fluid Properties and Statics Fluid Dynamics and Bernoulli's Equation Pumps, Turbines, and Flow Measurement
12 Thermodynamics and Heat Transfer (9–14 Questions)
Laws of Thermodynamics and Properties Thermodynamic Cycles and Applications Heat Transfer: Conduction, Convection, and Radiation
13 Basic Electrical Engineering (6–9 Questions)
Electrical Fundamentals and DC Circuits AC Circuits and Three-Phase Power
14 Safety, Health, and Environment (6–9 Questions)
Industrial Safety and Hazard Management
15 Instrumentation and Controls (4–6 Questions)
Sensors, Data Acquisition, and Control Systems
16 Computational Tools and Computer Science
Spreadsheets, Structured Programming, and Flowcharts
Fluid Properties and Statics
Key Takeaways Explain This Topic AI
Fluid mechanics is the highest-weighted topic on the FE Other Disciplines exam: 12–18 questions (~14%).
Density ρ = m/V; specific weight γ = ρg; specific gravity SG = ρ/ρ_water = γ/γ_water (dimensionless).
Dynamic viscosity μ (Pa·s) measures resistance to shear via τ = μ(du/dy); kinematic viscosity ν = μ/ρ (m²/s).
Hydrostatic pressure rises linearly with depth: p = p₀ + γh = p₀ + ρgh; in water γ ≈ 9,810 N/m³.
Hydrostatic force on a plane submerged surface is F = γh̄A (h̄ = depth of the centroid); the center of pressure lies below the centroid.
Buoyancy (Archimedes): an upward force equal to the weight of displaced fluid, F_B = ρ_fluid·g·V_displaced; a floating body submerges a fraction equal to SG.
Last updated: June 2026
FE Exam Weight: Fluid Mechanics is the single highest-weighted topic on the FE Other Disciplines exam — 12–18 of 110 questions (~14%). The exam is open to the searchable NCEES FE Reference Handbook, so master which formula applies and keep units consistent.
Fluid Properties
- Property Symbol Definition SI units
- Density ρ mass per volume kg/m³
- Specific weight γ weight per volume = ρg N/m³
- Specific gravity SG ρ/ρ_water dimensionless
- Dynamic viscosity μ resistance to shear Pa·s (N·s/m²)
- Kinematic viscosity ν μ/ρ m²/s
- Surface tension σ force per length at a surface N/m
- Bulk modulus E_v resistance to compression Pa
- Water at 20°C (memorize)
- ρ ≈ 998 kg/m³ ≈ 1,000 kg/m³
- γ ≈ 9,790 N/m³ ≈ 9,810 N/m³ (use 9.81 kN/m³)
- μ ≈ 1.0 × 10⁻³ Pa·s; ν ≈ 1.0 × 10⁻⁶ m²/s
Specific gravity is the fast bridge: SG = 0.8 means ρ = 800 kg/m³ and γ = 7,848 N/m³.
Viscosity and Newton's Law
Newton's law of viscosity relates shear stress to the velocity gradient:
τ = μ (du/dy)
- Fluid type Behavior Examples
- Newtonian τ ∝ du/dy (constant μ) water, air, light oils
- Shear-thinning μ falls as shear rate rises ketchup, blood, paint
- Shear-thickening μ rises as shear rate rises cornstarch + water
- Bingham plastic needs a yield stress to flow toothpaste, drilling mud
- Worked example — viscous shear stress
Oil with μ = 0.1 Pa·s fills a 2 mm gap; the top plate moves at 0.5 m/s while the bottom is fixed. The velocity gradient is linear: du/dy = 0.5/0.002 = 250 s⁻¹. So τ = μ(du/dy) = 0.1 × 250 = 25 Pa . This is the drag stress on the moving plate.
Hydrostatic Pressure
In a fluid at rest, pressure increases linearly with depth:
p = p₀ + ρgh = p₀ + γh
Key facts the FE tests:
Pressure acts equally in all directions at a point ( Pascal's law ).
Pressure is the same at every point on a horizontal plane in a connected fluid.
Gauge pressure = absolute pressure − atmospheric (p_atm ≈ 101.3 kPa).
Worked example — gauge pressure with depth
Gauge pressure 10 m down in water: p = ρgh = 1,000 × 9.81 × 10 = 98,100 Pa = 98.1 kPa — almost exactly 1 atmosphere. So every ~10 m of water adds one atmosphere of gauge pressure.
Manometers
For a U-tube manometer, walk from one known end to the other, adding γh going down and subtracting γh going up :
p_A + γ₁h₁ − γ₂h₂ − γ₃h₃ = p_B
The manometer fluid (often mercury, SG = 13.6) amplifies small pressure differences into readable height changes.
Hydrostatic Force on a Plane Surface
The resultant force on a submerged flat plate is:
F = γ h̄ A
where h̄ is the vertical depth of the centroid of the surface and A is its area. The force acts at the center of pressure , located below the centroid:
y_cp = ȳ + I_x̄ / (ȳ A)
The extra term I_x̄/(ȳA) pushes the resultant deeper than the centroid because pressure grows with depth — the lower part of the plate feels more pressure.
Worked example — force on a gate
A rectangular gate 2 m wide × 3 m tall has its top edge 1 m below the surface. Centroid depth h̄ = 1 + 3/2 = 2.5 m; area A = 2 × 3 = 6 m².
F = γh̄A = 9,810 × 2.5 × 6 = 147,150 N ≈ 147 kN .
Curved Surfaces
Resolve into components: the horizontal force equals γh̄A on the surface's vertical projection ; the vertical force equals the weight of fluid (real or virtual) directly above the curved surface.
Buoyancy — Archimedes' Principle
A fully or partly submerged body feels an upward buoyant force equal to the weight of fluid it displaces:
- F_B = ρ_fluid · g · V_displaced = γ_fluid · V_displaced
- Floating bodies
A floating object displaces exactly its own weight of fluid, so:
fraction submerged = ρ_object / ρ_fluid = SG (in water)
An iceberg (SG ≈ 0.92) floats with ~92% of its volume underwater; an SG = 0.8 block floats 80% submerged. If ρ_object > ρ_fluid the body sinks; if equal it is neutrally buoyant.
Worked example — apparent weight
A 0.01 m³ steel block (ρ = 7,850 kg/m³) is fully submerged in water. Its weight in air = ρgV = 7,850 × 9.81 × 0.01 = 770 N. Buoyant force = 1,000 × 9.81 × 0.01 = 98.1 N. Apparent (submerged) weight = 770 − 98.1 = 672 N .
Stability of floating bodies
A floating body is stable when its metacenter M lies above the center of gravity G . When it tilts, the center of buoyancy shifts, creating a righting moment if M is above G. A low, wide hull (ballast low) is stable; a top-heavy one capsizes.
Common Traps
γ vs. ρ. Use ρgh when you have density; γh when you have specific weight. Don't multiply by g twice.
h̄ is the centroid depth , not the depth of the top edge.
SI consistency. kPa = kN/m²; keep pressures, areas, and forces in compatible units.
Gauge vs. absolute. Manometers and gate problems use gauge pressure unless atmospheric acts on only one side.
Quick reference
γ = ρg; SG = ρ/ρ_water; ν = μ/ρ.
p = p₀ + γh; F = γh̄A on a plane surface.
F_B = γ_fluid·V_displaced; floating fraction submerged = SG.
Water: ρ ≈ 1,000 kg/m³, γ ≈ 9,810 N/m³.