Study guide
Industrial Safety and Hazard Management
FE Fundamentals of Engineering Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction to the FE Exam
About the FE Exam FE Exam Study Strategies Navigating the FE Reference Handbook
2 Mathematics (8–12 Questions)
Analytic Geometry and Trigonometry Single-Variable Calculus Differential Equations Linear Algebra and Matrix Operations Numerical Methods
3 Probability and Statistics (6–9 Questions)
Probability Fundamentals Probability Distributions Statistical Estimation and Hypothesis Testing
4 Chemistry (5–8 Questions)
Chemical Reactions and Stoichiometry Acids, Bases, and pH Oxidation-Reduction and Corrosion
5 Ethics and Professional Practice (5–8 Questions)
Engineering Ethics Fundamentals
6 Engineering Economics (6–9 Questions)
Time Value of Money Economic Analysis Methods
7 Statics (9–14 Questions)
Force Systems and Equilibrium Trusses, Frames, and Machines Centroids and Moments of Inertia Static Friction
8 Dynamics (9–14 Questions)
Particle Kinematics Kinetics: Force, Mass, and Acceleration Work, Energy, Impulse, and Momentum Rigid-Body Rotation and Mechanical Vibrations
9 Strength of Materials (9–14 Questions)
Stress and Strain Fundamentals Beam Analysis: Shear and Moment Diagrams Bending Stress and Torsion Stress Transformation and Material Failure
10 Materials Science (6–9 Questions)
Material Properties and Selection Phase Diagrams and Alloy Systems
11 Fluid Mechanics (12–18 Questions)
Fluid Properties and Statics Fluid Dynamics and Bernoulli's Equation Pumps, Turbines, and Flow Measurement
12 Thermodynamics and Heat Transfer (9–14 Questions)
Laws of Thermodynamics and Properties Thermodynamic Cycles and Applications Heat Transfer: Conduction, Convection, and Radiation
13 Basic Electrical Engineering (6–9 Questions)
Electrical Fundamentals and DC Circuits AC Circuits and Three-Phase Power
14 Safety, Health, and Environment (6–9 Questions)
Industrial Safety and Hazard Management
15 Instrumentation and Controls (4–6 Questions)
Sensors, Data Acquisition, and Control Systems
16 Computational Tools and Computer Science
Spreadsheets, Structured Programming, and Flowcharts
Industrial Safety and Hazard Management
Key Takeaways Explain This Topic AI
Industrial hygiene anticipates, recognizes, evaluates, and controls workplace hazards; the hierarchy of controls ranks them elimination > substitution > engineering > administrative > PPE (PPE is the last resort).
PEL is OSHA's legal 8-hour TWA limit; TLV is ACGIH's recommended limit; STEL is a 15-minute limit; IDLH is the 30-minute escape limit; compute exposure with TWA = Σ(Cᵢtᵢ)/8.
GHS requires a standardized 16-section Safety Data Sheet (SDS) and pictogram labels for every hazardous chemical; toxicology uses dose–response and LD50/LC50.
OSHA requires a hearing conservation program at 85 dBA (8-hr TWA) and sets a 90 dBA PEL; a safe atmosphere is 19.5–23.5% oxygen.
Flammables ignite only between the LEL and UEL; confined-space entry requires atmospheric testing, ventilation, an attendant, a permit, rescue plan, and lockout/tagout.
Risk = probability × consequence (severity); environmental statutes include the Clean Air Act, Clean Water Act, RCRA, and CERCLA/Superfund.
Last updated: June 2026
FE Exam Weight: Safety, Health, and Environment contributes 6–9 questions (~7% of the 110-question FE Other Disciplines exam). Expect definition recall (PEL vs. TLV, hierarchy of controls), a TWA or LEL calculation, and high-level environmental-regulation identification. Key tables live in the searchable NCEES FE Reference Handbook .
Industrial Hygiene
Industrial hygiene is the science of anticipating, recognizing, evaluating, and controlling workplace conditions that may cause illness or injury. Hazards group into five categories:
- Category Examples
- Chemical Toxic gases, vapors, fumes, dusts, solvents
- Physical Noise, vibration, radiation, heat/cold
- Biological Bacteria, viruses, molds, bloodborne pathogens
- Ergonomic Repetitive motion, awkward posture, heavy lifting
- Psychosocial Stress, fatigue, workplace violence
- Hierarchy of Controls
Controls are ranked most to least effective ; the exam routinely tests this order:
- Elimination — remove the hazard entirely (most effective)
- Substitution — replace with a less hazardous material/process
- Engineering controls — isolate workers (ventilation, guarding, enclosure)
- Administrative controls — change work practices (training, rotation, scheduling)
- PPE — respirators, gloves, goggles ( last resort )
Exam key: PPE is the LAST line of defense, not the first; engineering controls outrank administrative controls because they don't depend on worker behavior.
Exposure Limits and Toxicology
- Term Set by Meaning
- PEL (Permissible Exposure Limit) OSHA (legal) 8-hour time-weighted average
- TLV (Threshold Limit Value) ACGIH (recommended) 8-hour TWA
- STEL (Short-Term Exposure Limit) ACGIH Max 15-minute exposure
- Ceiling (C) OSHA/ACGIH Never-to-be-exceeded value
- IDLH NIOSH Max concentration for 30-min escape
Time-weighted average: TWA = Σ(Cᵢ·tᵢ) ÷ 8 hours.
Worked example: 50 ppm for 3 h, 80 ppm for 2 h, 20 ppm for 3 h → TWA = (50·3 + 80·2 + 20·3)/8 = (150+160+60)/8 = 46.25 ppm — compare against the PEL/TLV.
Toxicology studies how dose affects harm. The dose–response curve plots effect versus dose; the LD50 (lethal dose for 50% of a test population) and LC50 (lethal airborne concentration) quantify acute toxicity — a lower LD50 means more toxic. Routes of entry are inhalation, absorption, ingestion, and injection. Effects may be acute (immediate) or chronic (long-term, e.g., silicosis, carcinogenesis).
Hazard Communication (GHS)
OSHA's Hazard Communication Standard adopts the Globally Harmonized System (GHS) . Every hazardous chemical needs a standardized 16-section Safety Data Sheet (SDS) (formerly MSDS) and a label with a signal word ("Danger" or "Warning"), hazard statements , and pictograms (flame, skull-and-crossbones, health hazard, corrosion, etc.). Workers must be trained on these.
Noise, Atmosphere, and Flammability
Noise: OSHA requires a hearing conservation program at 85 dBA (8-hour TWA) and sets a 90 dBA PEL . Because decibels are logarithmic, a 3-dB rise roughly doubles sound energy and halves the allowable exposure time.
Atmosphere: a normal/safe atmosphere is 19.5–23.5% oxygen (< 19.5% deficient; > 23.5% enriched/fire risk; ambient ≈ 20.9%).
Flammability: a vapor ignites only between its LEL (Lower Explosive Limit) and UEL (Upper Explosive Limit) ; below LEL is too lean, above UEL too rich.
- Gas Hazard note
- CO Toxic; binds hemoglobin, displaces O₂
- H₂S Toxic; deadens smell at high concentration
- CH₄ Explosive 5–15% in air
- Confined Space, Electrical, and Fire Safety
A confined space is large enough to enter, has limited entry/exit, and is not designed for continuous occupancy. Permit-required entry demands: atmospheric testing first , mechanical ventilation, an outside attendant , communication, a rescue plan , an entry permit, and lockout/tagout (LOTO) of all energy sources.
Electrical: 50–600 V causes most electrocutions; LOTO de-energizes and locks equipment before maintenance, and arc-flash PPE is required at higher energy. Fire needs the fire-tetrahedron — fuel, oxygen, heat, chain reaction — and is fought by removing one; extinguisher classes are A (ordinary), B (flammable liquids), C (electrical), D (metals), and K (kitchen).
Risk and Environmental Regulation
Risk = probability × consequence (severity) ; controls aim to reduce one or both, and residual risk is documented. At a high level the FE expects awareness of major U.S. environmental statutes:
- Statute Scope
- Clean Air Act (CAA) Air emissions, NAAQS criteria pollutants
- Clean Water Act (CWA) Discharges to surface water (NPDES permits)
- RCRA Hazardous-waste "cradle-to-grave" management
- CERCLA (Superfund) Cleanup of abandoned hazardous sites
- SDWA Drinking-water standards (MCLs)
Personal protective equipment maps to the hazard: hard hats (head), safety glasses/goggles (eyes), earplugs/muffs (> 85 dBA), respirators (airborne), chemical gloves (hands), steel-toe boots (feet), and fall harnesses above ~6 ft.
Radiation safety distinguishes ionizing radiation (alpha, beta, gamma, X-ray, neutron — capable of breaking chemical bonds and damaging DNA) from non-ionizing radiation (UV, microwave, RF). Protection follows the ALARA principle (As Low As Reasonably Achievable) using the three classic controls: time (minimize exposure duration), distance (intensity falls with the inverse square of distance), and shielding (lead or concrete for gamma, plastic for beta). Dose is measured in rem or sievert.
These same time–distance–shielding ideas, plus the hierarchy of controls, tie the whole safety section together: identify the hazard, evaluate the exposure quantitatively, then control it at the highest feasible level.
The Hierarchy of Controls and Exposure Limits
OSHA and NIOSH rank hazard controls by effectiveness in a fixed hierarchy — always favor the highest feasible level before dropping down, a logic the FE tests directly:
- Rank Control Example
- 1 (best) Elimination Remove the hazard entirely
- 2 Substitution Replace with a safer chemical
- 3 Engineering Ventilation, guarding, enclosure
- 4 Administrative Procedures, rotation, training
- 5 (last) PPE Respirators, gloves, hearing protection
PPE is the last resort , not the first, because it relies on human behavior and fails silently. Exposure is benchmarked against the PEL (OSHA permissible exposure limit, legally enforceable, usually an 8-hour TWA) and the TLV (ACGIH threshold limit value, a guideline). A STEL caps short 15-minute exposures. Radioactive and toxic dose calculations use half-life t₁/₂, where activity halves each interval — central to the radiation-exposure questions.