Study guide

Beam Analysis: Shear and Moment Diagrams

FE Fundamentals of Engineering Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction to the FE Exam

About the FE Exam FE Exam Study Strategies Navigating the FE Reference Handbook

2 Mathematics (8–12 Questions)

Analytic Geometry and Trigonometry Single-Variable Calculus Differential Equations Linear Algebra and Matrix Operations Numerical Methods

3 Probability and Statistics (6–9 Questions)

Probability Fundamentals Probability Distributions Statistical Estimation and Hypothesis Testing

4 Chemistry (5–8 Questions)

Chemical Reactions and Stoichiometry Acids, Bases, and pH Oxidation-Reduction and Corrosion

5 Ethics and Professional Practice (5–8 Questions)

Engineering Ethics Fundamentals

6 Engineering Economics (6–9 Questions)

Time Value of Money Economic Analysis Methods

7 Statics (9–14 Questions)

Force Systems and Equilibrium Trusses, Frames, and Machines Centroids and Moments of Inertia Static Friction

8 Dynamics (9–14 Questions)

Particle Kinematics Kinetics: Force, Mass, and Acceleration Work, Energy, Impulse, and Momentum Rigid-Body Rotation and Mechanical Vibrations

9 Strength of Materials (9–14 Questions)

Stress and Strain Fundamentals Beam Analysis: Shear and Moment Diagrams Bending Stress and Torsion Stress Transformation and Material Failure

10 Materials Science (6–9 Questions)

Material Properties and Selection Phase Diagrams and Alloy Systems

11 Fluid Mechanics (12–18 Questions)

Fluid Properties and Statics Fluid Dynamics and Bernoulli's Equation Pumps, Turbines, and Flow Measurement

12 Thermodynamics and Heat Transfer (9–14 Questions)

Laws of Thermodynamics and Properties Thermodynamic Cycles and Applications Heat Transfer: Conduction, Convection, and Radiation

13 Basic Electrical Engineering (6–9 Questions)

Electrical Fundamentals and DC Circuits AC Circuits and Three-Phase Power

14 Safety, Health, and Environment (6–9 Questions)

Industrial Safety and Hazard Management

15 Instrumentation and Controls (4–6 Questions)

Sensors, Data Acquisition, and Control Systems

16 Computational Tools and Computer Science

Spreadsheets, Structured Programming, and Flowcharts

Beam Analysis: Shear and Moment Diagrams

Key Takeaways Explain This Topic AI

Shear V and bending moment M vary along a beam and are found by sectioning and applying ΣF = 0 and ΣM = 0.

The fundamental relations are dV/dx = −w(x) and dM/dx = V(x): load drives shear, shear drives moment.

A concentrated load makes the shear diagram jump by the load; a concentrated moment makes the moment diagram jump by that moment.

Maximum bending moment occurs where shear crosses zero, or at a fixed support where a reaction moment exists.

Simply supported, central load P: M_max = PL/4. Simply supported, UDL w: M_max = wL²/8. Cantilever, end load P: M_max = PL.

The area under the shear diagram between two points equals the change in moment between them — a fast graphical check.

Last updated: June 2026

Why Shear and Moment Diagrams Matter

Before you can size a beam you must know the internal shear force V and bending moment M at every cross-section, because bending stress depends on M and transverse shear stress depends on V. A shear and moment diagram plots these along the beam's length so the critical section — where stress is largest — jumps out visually.

Sign Convention

  • Quantity Positive Negative
  • Shear V Rotates the element clockwise Counterclockwise
  • Moment M Concave-up bending ("smile," sagging) Concave-down ("frown," hogging)

Pick a convention and hold it for the whole problem. A positive moment puts the bottom fiber in tension.

The Calculus Relationships

The load w(x), shear V(x), and moment M(x) are linked by two derivatives:

dV/dx = −w(x) and dM/dx = V(x)

Integrating gives two graphical rules that solve most FE problems without calculus:

  • Change in shear between two points = −(area under the load curve)
  • Change in moment between two points = (area under the shear diagram)

These also fix the shape of each diagram:

  • Loading region Shear diagram Moment diagram
  • No load Constant (horizontal) Linear (sloped)
  • Uniform load w Linear (sloped) Parabolic
  • Triangular load Parabolic Cubic
  • Concentrated force P Vertical jump of P Slope changes (kink)
  • Concentrated moment M₀ No change Vertical jump of M₀
  • Finding the Maximum Moment

Because dM/dx = V, the moment is stationary (a max or min) exactly where V = 0 . So the procedure is: (1) find reactions, (2) build the shear diagram, (3) locate where V crosses zero, (4) compute M there by summing the shear area up to that point. Also check fixed supports, where a reaction moment can be the largest M.

  • Standard Beam Formulas (memorize the top three)
  • Simply supported — central point load P
  • Quantity Formula
  • Reactions R_A = R_B = P/2
  • Max shear V = P/2 (at supports)
  • Max moment M_max = PL/4 (at midspan)
  • Max deflection δ_max = PL³/(48EI)
  • Simply supported — uniform distributed load w
  • Quantity Formula
  • Reactions R_A = R_B = wL/2
  • Max shear V = wL/2 (at supports)
  • Max moment M_max = wL²/8 (at midspan)
  • Max deflection δ_max = 5wL⁴/(384EI)
  • Cantilever — end point load P
  • Quantity Formula
  • Reaction R = P; wall moment = PL
  • Max shear V = P (constant)
  • Max moment M_max = PL (at the wall)
  • Max deflection δ_max = PL³/(3EI) (free end)
  • Cantilever — uniform distributed load w
  • Quantity Formula
  • Reaction R = wL; wall moment = wL²/2
  • Max moment M_max = wL²/2 (at the wall)
  • Max deflection δ_max = wL⁴/(8EI) (free end)
  • Worked Example — Simply Supported Beam with UDL

A 8 m simply supported beam carries w = 5 kN/m over its full length. Find R_A, the location of M_max, and M_max.

By symmetry, total load = wL = 5(8) = 40 kN, so R_A = R_B = 20 kN.

Shear starts at +20 kN at the left support and decreases at −w = −5 kN/m, so it reaches zero at x = 20/5 = 4 m (midspan), as symmetry predicts.

M_max = area of the shear triangle from 0 to 4 m = ½(4)(20) = 40 kN·m.

Cross-check with the formula: M_max = wL²/8 = 5(8²)/8 = 5(64)/8 = 40 kN·m . ✓

The moment diagram is a parabola peaking at midspan and zero at both pinned supports.

Worked Example — Overhanging / Point-Load Check

For a simply supported beam with a single central load P = 12 kN over L = 6 m: reactions R_A = R_B = 6 kN. Shear is +6 kN from the left support to midspan, then jumps down by 12 kN to −6 kN at the load, and stays −6 kN to the right support. The moment rises linearly to M_max = PL/4 = 12(6)/4 = 18 kN·m at midspan, then falls linearly to zero — a triangular moment diagram. Notice the shear jump of 12 kN at the load equals the load, confirming the concentrated-force rule.

Common Traps

Forgetting reactions first. Every diagram starts from correct support reactions; an error there propagates everywhere.

Wrong M_max location. For an off-center point load or combined loading, M_max is wherever V = 0, not automatically at midspan.

Distributed-load resultant. A UDL of intensity w over length a acts as a single force wa at the centroid (a/2 from either end) when computing reactions.

Sign of cantilever moment. At a fixed wall the reaction moment is the maximum; treat it as negative (hogging) under downward load.

Quick reference

dV/dx = −w; dM/dx = V; ΔM = area under V-diagram.

M_max where V = 0 (or at a fixed support).

SS central load: M = PL/4. SS UDL: M = wL²/8. Cantilever end load: M = PL; cantilever UDL: M = wL²/2.

Standard Reaction and Diagram Relationships

The slope-and-area rules tie the load, shear, and moment diagrams together and let you draw one from another without re-integrating: the slope of the shear diagram equals the load intensity (dV/dx = −w), and the slope of the moment diagram equals the shear (dM/dx = V). Therefore the change in shear between two points equals the area under the load curve, and the change in moment equals the area under the shear curve.

  • Relationship Consequence
  • dV/dx = −w Uniform load → linear V
  • dM/dx = V Linear V → parabolic M
  • V = 0 Location of maximum moment

The maximum bending moment occurs where shear crosses zero — this single fact answers many FE beam questions directly. For a simply supported span of length L with a central point load P, V steps from +P/2 to −P/2 and M_max = PL/4 at midspan; for a uniform load w, M_max = wL²/8.