Study guide
Laws of Thermodynamics and Properties
FE Fundamentals of Engineering Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction to the FE Exam
About the FE Exam FE Exam Study Strategies Navigating the FE Reference Handbook
2 Mathematics (8–12 Questions)
Analytic Geometry and Trigonometry Single-Variable Calculus Differential Equations Linear Algebra and Matrix Operations Numerical Methods
3 Probability and Statistics (6–9 Questions)
Probability Fundamentals Probability Distributions Statistical Estimation and Hypothesis Testing
4 Chemistry (5–8 Questions)
Chemical Reactions and Stoichiometry Acids, Bases, and pH Oxidation-Reduction and Corrosion
5 Ethics and Professional Practice (5–8 Questions)
Engineering Ethics Fundamentals
6 Engineering Economics (6–9 Questions)
Time Value of Money Economic Analysis Methods
7 Statics (9–14 Questions)
Force Systems and Equilibrium Trusses, Frames, and Machines Centroids and Moments of Inertia Static Friction
8 Dynamics (9–14 Questions)
Particle Kinematics Kinetics: Force, Mass, and Acceleration Work, Energy, Impulse, and Momentum Rigid-Body Rotation and Mechanical Vibrations
9 Strength of Materials (9–14 Questions)
Stress and Strain Fundamentals Beam Analysis: Shear and Moment Diagrams Bending Stress and Torsion Stress Transformation and Material Failure
10 Materials Science (6–9 Questions)
Material Properties and Selection Phase Diagrams and Alloy Systems
11 Fluid Mechanics (12–18 Questions)
Fluid Properties and Statics Fluid Dynamics and Bernoulli's Equation Pumps, Turbines, and Flow Measurement
12 Thermodynamics and Heat Transfer (9–14 Questions)
Laws of Thermodynamics and Properties Thermodynamic Cycles and Applications Heat Transfer: Conduction, Convection, and Radiation
13 Basic Electrical Engineering (6–9 Questions)
Electrical Fundamentals and DC Circuits AC Circuits and Three-Phase Power
14 Safety, Health, and Environment (6–9 Questions)
Industrial Safety and Hazard Management
15 Instrumentation and Controls (4–6 Questions)
Sensors, Data Acquisition, and Control Systems
16 Computational Tools and Computer Science
Spreadsheets, Structured Programming, and Flowcharts
Laws of Thermodynamics and Properties
Key Takeaways Explain This Topic AI
First Law (closed system): Q − W = ΔU + ΔKE + ΔPE, reducing to ΔU when kinetic and potential energy changes are negligible; steady-flow balances include enthalpy, kinetic, and potential terms.
Sign convention on the FE: Q is positive INTO the system, W is positive done BY the system — getting this wrong flips your answer.
Second Law: the entropy of an isolated system can only increase (ΔS ≥ 0); no real engine converts all heat into work.
For ideal gases Δu = cv ΔT and Δh = cp ΔT always hold, even when volume or pressure is not constant.
For air the FE Handbook lists cp = 1.005, cv = 0.718 kJ/(kg·K), R = 0.287 kJ/(kg·K), k = 1.4 — memorize the relationship cp − cv = R.
The exam is open to the NCEES FE Reference Handbook — practice FINDING the property tables and process equations, not memorizing them.
Last updated: September 2026
FE Exam Weight: Thermodynamics and Heat Transfer is 9–14 questions (~10%) on the FE Other Disciplines module. Every equation below appears in the searchable NCEES FE Reference Handbook , so the skill being tested is finding the right relation and applying it with correct units — not memorization. The exam is open only to that Handbook plus an NCEES-approved calculator.
State, Properties, and Process
A thermodynamic property is any quantity whose value depends only on the current state, not on how the system got there: temperature T, pressure P, specific volume v, internal energy u, enthalpy h, and entropy s are all state (point) functions. Heat Q and work W are NOT properties — they are path-dependent; you cannot speak of "the heat in a system," only the heat that crosses a boundary during a process. Intensive properties (T, P, v, u, h, s) are independent of system size; extensive properties (V, U, H, S) scale with mass.
The state postulate says a simple compressible substance is fully fixed by two independent intensive properties — so knowing P and v (or T and x, the quality) lets you read every other property from a table.
- Property Symbol Type Common units
- Temperature T Intensive K (absolute!), °C
- Pressure P Intensive kPa, Pa, bar
- Specific volume v = V/m Intensive m³/kg
- Internal energy u Intensive kJ/kg
- Enthalpy h = u + Pv Intensive kJ/kg
- Entropy s Intensive kJ/(kg·K)
Enthalpy h = u + Pv is defined for convenience: in any open (flow) device the combination u + Pv naturally appears because the flowing fluid carries both its internal energy and the flow work Pv needed to push it across the boundary. A classic FE trap is using temperatures in °C inside ratios or absolute-temperature formulas — entropy changes, the ideal-gas law, Carnot efficiency, and radiation ALL require kelvin (K = °C + 273.15).
The Four Laws
Zeroth Law: if A is in thermal equilibrium with C and B is in equilibrium with C, then A and B are in equilibrium — this is what makes temperature measurable and lets a thermometer work.
First Law — conservation of energy: For a closed system (fixed mass, no flow), Q − W = ΔE = ΔU + ΔKE + ΔPE. When changes in bulk kinetic and potential energy are negligible, this reduces to Q − W = ΔU, or per unit mass q − w = Δu. With the standard sign convention, Q is positive when heat is added to the system and W is positive when the system does work on its surroundings .
For an open system at steady state, energy entering by mass and heat equals energy leaving by mass and shaft work: Q ˙ − W ˙ s = m ˙ [ ( h 2 − h 1 ) + V 2 2 − V 1 2 2 + g ( z 2 − z 1 ) ] \dot{Q} - \dot{W}_s = \dot{m}\Big[(h_2-h_1) + \frac{V_2^2 - V_1^2}{2} + g(z_2 - z_1)\Big] Q ˙ − W ˙ s = m ˙ [ ( h 2 − h 1 ) + 2 V 2 2 − V 1 2 + g ( z 2 − z 1 ) ]
In most FE problems the kinetic and potential terms are negligible, leaving Q̇ − Ẇs = ṁ(h₂ − h₁) — note it is enthalpy , not internal energy, that appears in flow devices (turbines, compressors, nozzles, heat exchangers).
Second Law. The Kelvin–Planck statement: no cyclic device can convert heat entirely into work — some heat must be rejected to a cold reservoir. The Clausius statement: heat cannot move from cold to hot without work input. Quantitatively, for any process the entropy of the universe never decreases : Δ S u n i v = Δ S s y s + Δ S s u r r ≥ 0 \Delta S_{univ} = \Delta S_{sys} + \Delta S_{surr} \geq 0 Δ S u ni v = Δ S sys + Δ S s u rr ≥ 0
Equality holds only for a reversible (ideal) process; every real process is irreversible and generates entropy. Third Law: the entropy of a perfect crystal approaches zero as T → 0 K, setting an absolute entropy reference.
Specific Heats and Ideal-Gas Relations
The ideal-gas law is PV = mRT = nR̄T, where R is the specific gas constant (R = R̄/M, with universal R̄ = 8.314 kJ/(kmol·K)). For any ideal gas, internal energy and enthalpy depend on temperature ALONE:
- Quantity Ideal-gas relation
- Internal-energy change Δu = cv ΔT
- Enthalpy change Δh = cp ΔT
- Gas-constant identity cp − cv = R
- Specific-heat ratio k = cp/cv
- Entropy (T, P) Δs = cp ln(T₂/T₁) − R ln(P₂/P₁)
- Entropy (T, v) Δs = cv ln(T₂/T₁) + R ln(v₂/v₁)
Standard air values: cp = 1.005, cv = 0.718 kJ/(kg·K), R = 0.287 kJ/(kg·K), k = 1.4. Check: cp − cv = 1.005 − 0.718 = 0.287 = R. ✓
Reversible Processes for Ideal Gases
Many FE questions ask which property stays constant during a named process and how to compute the work:
- Process Held constant Work (boundary) P-v-T relation
- Isothermal T W = mRT ln(v₂/v₁) Pv = const
- Isobaric P W = P(V₂ − V₁) v/T = const
- Isochoric v W = 0 P/T = const
- Adiabatic Q = 0 W = −ΔU Pvᵏ = const
- Isentropic s (rev. adiabatic) — T₂/T₁ = (P₂/P₁)^((k−1)/k)
- Polytropic Pvⁿ = const W = (P₂V₂ − P₁V₁)/(1 − n) general
Worked first-law example (closed system). A piston–cylinder holds 2 kg of air. During a process 150 kJ of heat is added and the air does 40 kJ of boundary work on the piston. Find the change in internal energy and, if cv = 0.718 kJ/(kg·K), the temperature rise.
Step 1 — First law: Q − W = ΔU → ΔU = 150 − 40 = 110 kJ (Q is +, work done BY the gas is +).
Step 2 — Temperature change: ΔU = m·cv·ΔT → ΔT = ΔU/(m·cv) = 110 / (2 × 0.718) = 110 / 1.436 = 76.6 K rise.
The most common error here is subtracting work the wrong way (using +W instead of −W) or applying ΔU = m·cp·ΔT — remember cv goes with internal energy, cp goes with enthalpy .
Worked isothermal-work example. 1 kg of air (R = 0.287) expands isothermally at 350 K from 100 kPa to 50 kPa. Since v₂/v₁ = P₁/P₂ = 2, W = mRT ln(v₂/v₁) = 1 × 0.287 × 350 × ln 2 = 100.45 × 0.693 = 69.6 kJ . Because T is constant, Δu = 0, so by the first law Q = W = 69.6 kJ — all the heat added leaves as work.
Exam tip: before plugging numbers, identify (1) closed vs. open system, (2) what is held constant, and (3) whether temperatures must be absolute. Doing those three checks first eliminates most thermodynamics mistakes on the FE.