Study guide

1.2 Using the NCEES FE Reference Handbook and Approved Calculators

FE Industrial and Systems Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Overview, CBT Strategy & Handbook Navigation

1.1 FE Industrial Exam Structure, CBT Logistics, and Pacing 1.2 Using the NCEES FE Reference Handbook and Approved Calculators

2 Chapter 2: Mathematics for Industrial Engineers

2.1 Analytic Geometry, Coordinate Systems, and Trigonometry 2.2 Calculus: Differential, Integral, and Series Approximations 2.3 Linear Algebra: Matrix Operations, Systems of Equations, and Vectors

3 Chapter 3: Engineering Sciences Core

3.1 Thermodynamics Fundamentals and Fluid Flow Principles 3.2 Statics, Dynamics, and Mechanics of Materials Core 3.3 Electrical Circuits, DC/AC Analysis, and Power in Industrial Systems

4 Chapter 4: Ethics and Professional Practice

4.1 NCEES Model Rules of Professional Conduct and Technical Society Ethics 4.2 Engineering Licensure, Public Welfare, and Professional Liability 4.3 Engineering Contracts, Intellectual Property, and Conflicts of Interest

5 Chapter 5: Engineering Economics

5.1 Time Value of Money, Discount Factors, and Equivalence 5.2 Evaluating Alternatives: Present Worth, Equivalent Annual Cost, and IRR 5.3 Incremental Rate of Return, Replacement Analysis, and Break-Even 5.4 Depreciation Methods, MACRS, Income Taxes, and Inflation

6 Chapter 6: Probability Foundations & Distributions

6.1 Basic Probability Concepts, Conditional Probability, and Bayes' Theorem 6.2 Discrete Probability Distributions 6.3 Continuous Probability Distributions

7 Chapter 7: Statistical Inference, Regression & Design of Experiments

7.1 Sampling Distributions, Central Limit Theorem, and Confidence Intervals 7.2 Hypothesis Testing: Means, Proportions, and Variances 7.3 Linear Regression, Correlation Analysis, and Design of Experiments (ANOVA)

8 Chapter 8: Data, Logic, Modeling & Linear Programming

8.1 Optimization Modeling: Decision Variables, Objectives, and Constraints 8.2 Linear Programming: Graphical Solutions and Simplex Fundamentals 8.3 Duality, Sensitivity Analysis, and Integer Linear Programming 8.4 Data, Logic Development, and Analytics

9 Chapter 9: Stochastic Models & Simulation

9.1 Queuing Theory: Little's Law, M/M/1, and Multi-Server Systems 9.2 Discrete-Time Markov Chains: Transition Matrices and Steady-State Probabilities 9.3 Discrete-Event Simulation Principles and Monte Carlo Modeling

10 Chapter 10: Engineering Management, Project Planning & Performance Measurement

10.1 Organizational Structure, Leadership, and Worker Motivation Theories 10.2 Project Management: WBS, Critical Path Method (CPM), PERT, and Crashing 10.3 Earned Value Management (EVM), Decision Trees, and Risk Preference 10.4 Performance Measurement: Productivity, KPIs, Wage Systems, and the Balanced Scorecard

11 Chapter 11: Manufacturing & Production Systems

11.1 Manufacturing Processes, Material Processing, and Tolerancing 11.2 Assembly Line Balancing, Takt Time, Cycle Time, and Throughput 11.3 Sustainable Manufacturing, Waste Minimization, and Life-Cycle Assessment

12 Chapter 12: Production Planning, Inventory Control & Sequencing

12.1 Demand Forecasting Methods and Forecast Error Tracking 12.2 Aggregate Planning, Master Production Scheduling (MPS), and MRP 12.3 Deterministic Inventory Models: EOQ, EPQ, and Safety Stock 12.4 Job Sequencing, Dispatching Rules, and Flow Shop Scheduling

13 Chapter 13: Lean Systems & Theory of Constraints

13.1 Lean Foundations: Value Stream Mapping, Seven Wastes, and 5S 13.2 Pull Systems, Kanban, Just-In-Time (JIT), and SMED Setup Reduction 13.3 Theory of Constraints: Bottleneck Identification and Drum-Buffer-Rope

14 Chapter 14: Facilities Planning & Material Handling

14.1 Facility Location Analysis: Qualitative Factor Rating and Centroid Method 14.2 Facility Layout Design and Flow Analysis 14.3 Material Handling Equipment, Warehousing, and AS/RS

15 Chapter 15: Supply Chain Design & Logistics

15.1 Supply Chain Network Architecture and Transportation Modes 15.2 Distribution Strategies, Cross-Docking, and Vehicle Routing 15.3 The Bullwhip Effect, Risk Pooling, and Supply Chain Coordination

16 Chapter 16: Human Factors & Cognitive Ergonomics

16.1 Cognitive Engineering, Human-Machine Interface, Displays, and Controls 16.2 Anthropometric Principles, Percentile Design, and Biomechanical Posture 16.3 Environmental Ergonomics: Industrial Noise, Lighting, and Heat Stress

17 Chapter 17: Physical Ergonomics & Workplace Safety

17.1 Physical Ergonomics: The NIOSH Manual Lifting Equation 17.2 Cumulative Trauma Disorders and Postural Assessment 17.3 Workplace Safety: OSHA Standards, Hazard Analysis, and Control Hierarchy

18 Chapter 18: Work Design & Measurement

18.1 Methods Engineering, Process Charting, and Principles of Motion Economy 18.2 Direct Stopwatch Time Study: Observed Time, Performance Rating, and Allowances 18.3 Predetermined Time Systems, Work Sampling, and Learning Curves

19 Chapter 19: Quality Management, Six Sigma & Analytical Tools

19.1 Quality Philosophies, Total Quality Management, and Cost of Quality 19.2 Six Sigma DMAIC Methodology and Quality Function Deployment 19.3 The Seven Basic Quality Tools, Root Cause Analysis, and Taguchi Loss Function

20 Chapter 20: Statistical Process Control

20.1 Statistical Process Control Principles, Variation, and Run Rules 20.2 Variable Control Charts: X-bar & R, X-bar & S, and Individual-Moving Range 20.3 Attribute Control Charts: Defectives (p, np) and Defects (c, u)

21 Chapter 21: Process Capability & Acceptance Sampling

21.1 Process Capability Indices and Defect Levels 21.2 Acceptance Sampling Concepts and Operating Characteristic Curves 21.3 Sampling Risks, AQL, LTPD, and Standard Sampling Plans

22 Chapter 22: Systems Engineering & Life-Cycle Management

22.1 The Systems Engineering V-Model, Stakeholder Requirements, and Functional Architecture 22.2 Configuration Management, Interface Control, and Verification & Validation 22.3 Life-Cycle Costing, Maintainability, and System Availability

23 Chapter 23: Reliability Engineering & Risk Analysis

23.1 Reliability Mathematics, Hazard Rates, and the Bathtub Curve 23.2 System Reliability Configurations: Series, Parallel, and k-out-of-n Systems 23.3 Failure Modes and Effects Analysis and Fault Tree Analysis

1.2 Using the NCEES FE Reference Handbook and Approved Calculators

Key Takeaways Explain This Topic AI

The NCEES FE Reference Handbook is the sole reference permitted during the examination, provided as a searchable digital PDF in a split-screen Pearson VUE interface.

Industrial engineering formulas are distributed across several handbook chapters beyond the dedicated Industrial & Systems section, including Engineering Economics, Mathematics, Probability & Statistics, Ethics, and Safety.

Handbook search efficiency requires querying distinct, unique nomenclature (e.g., 'Economic Order Quantity', 'Standard time', 'RWL') rather than generic words like 'time', 'cost', or 'control' which yield hundreds of distracting matches.

Only non-communicating scientific calculators from Texas Instruments (TI-30X, TI-36X), Casio (fx-115, fx-991), and Hewlett-Packard (HP 33s, HP 35s) are permitted inside the testing room.

Harnessing built-in calculator features—such as 2-variable linear regression, numerical root solving for internal rate of return, and matrix operations—saves multiple minutes per question and eliminates manual arithmetic slips.

Last updated: September 2026

1.2 Using the NCEES FE Reference Handbook and Approved Calculators

The FE exam is a strictly closed-book test, but you are not left unassisted. NCEES provides the official NCEES FE Reference Handbook —a comprehensive, searchable digital compendium containing virtually every formula, statistical distribution table, standard normal curve, and economic factor needed to pass. Earning a high score on the FE Industrial and Systems exam does not hinge on memorizing complex equations; it hinges on instantaneous reference navigation and efficient calculator mechanics.

1. The CBT Split-Screen Interface and Search Mechanics

At your Pearson VUE testing workstation, you will work on a 24-inch monitor displaying a split-screen layout. NCEES supplies the current handbook as a searchable PDF and standardizes on the 24-inch monitor specifically so the question and the handbook fit side by side. Note one hard constraint: the Ctrl + F search shortcut is disabled ; you must use the search box on the left side of the supplied reference material. ┌───────────────────────────────────────┬───────────────────────────────────────┐

  • │ EXAM QUESTION PANE │ REFERENCE HANDBOOK PANE │
  • │ │ Search: [ EOQ ] │
  • │ Question 42 of 110 [Flag] │ Bookmarks: │
  • │ │ ► Mathematics │
  • │ An assembly cell operates with... │ ► Engineering Economics │
  • │ What is the required takt time? │ ▼ Industrial and Systems │
  • │ │ • Linear Programming │
  • │ (A) 24.5 seconds │ • Queuing Models │
  • │ (B) 48.0 seconds │ • Quality & Control Charts │
  • │ (C) 62.2 seconds │ • Ergonomics & Safety │
  • │ (D) 120.0 seconds │ │
  • │ │ Formula: │
  • │ [Previous] [Calculator] [Next] │ Takt Time = Available Time / Demand │
  • └───────────────────────────────────────┴───────────────────────────────────────┘
  • Search Syntax and Search Tool Capabilities

The on-screen PDF search tool operates under specific constraints that distinguish it from modern web search engines:

Exact Literal Substring Matching: The search engine searches for literal character sequences. It does not support wildcards ( * ), boolean operators ( AND , OR , NOT ), or fuzzy matching. If you misspell a word, the search returns zero results.

Keyword Specificity vs. Search Flooding: Broad keywords generate overwhelming search results that waste critical exam time. Searching generic terms such as "inventory" , "variance" , "cost" , or "probability" returns 80 to 200+ instances dispersed across civil, mechanical, chemical, and electrical sections.

Targeted Nomenclature: Train yourself to search for unique, distinguishing formula identifiers or specialized acronyms. The table below illustrates high-efficiency versus low-efficiency search queries:

  • Topic Area Ineffective / High-Collision Search Optimal High-Precision Search Query
  • Inventory Control cost (300+ hits), inventory (80+ hits) Economic Order Quantity , Holding cost , EOQ

Statistical Process Control chart (150+ hits), control (200+ hits) c-chart , np-chart , Upper Control Limit , A2

  • Work Measurement time (500+ hits), allowance (40+ hits) Standard time , Normal time , observed time
  • Ergonomics & Safety lifting (30+ hits), safety (120+ hits) Recommended Weight Limit , RWL , HM , VM
  • Queuing Theory queue (60+ hits), wait (90+ hits) Little's Law , Poisson arrivals , M/M/1
  • Assembly Line Balancing line (250+ hits), efficiency (70+ hits) Balance delay , Takt time , precedence

Bookmarks Pane Over Search: In many cases, clicking directly through the hierarchical Bookmarks pane is twice as fast as typing a search query. Expand the Industrial and Systems Engineering section to jump immediately to operations research, facilities, or quality subheadings.

2. Handbook Organization: Where IE Topics Reside

A frequent trap for FE Industrial candidates is assuming that every formula relevant to their discipline is housed inside the "Industrial and Systems Engineering" chapter. In practice, the NCEES Handbook organizes foundational tools across multiple shared engineering chapters. You must know where each formula category lives:

Cross-Disciplinary Distribution of Industrial Engineering Topics

Handbook Section Essential Formulas and Tables for Industrial Engineers Typical Exam Applications

Industrial and Systems Engineering • Operations research formulations (LP canonical form, dual variables); • Queuing models ( M / M / 1 , M / M / s M/M/1, M/M/s M / M /1 , M / M / s , service rates, Little's Law L = λ W L = \lambda W L = λW ); • Production planning, inventory ( E O Q , E P Q EOQ, EPQ EOQ , EPQ , safety stock, continuous review); • Forecasting models (moving averages, exponential smoothing, tracking signal, MAD, MSE); • Facility layout (Centroid method, rectilinear/Euclidean distance metrics); • Assembly line balancing (takt time, theoretical minimum workstations, balance delay); • Statistical quality control ( X ˉ − R , X ˉ − s , p , n p , c , u \bar{X}-R, \bar{X}-s, p, np, c, u X ˉ − R , X ˉ − s , p , n p , c , u charts and factors A 2 , D 3 , D 4 A_2, D_3, D_4 A 2 ​ , D 3 ​ , D 4 ​ ); • Process capability ( C p , C p k , P p , P p k C_p, C_{pk}, P_p, P_{pk} C p ​ , C p k ​ , P p ​ , P p k ​ , PPM defect estimation); • Human factors and ergonomics (NIOSH lifting equation, noise dose, luminance); • Work measurement (observed, normal, and standard times; performance rating; allowances); • Reliability engineering (series/parallel configurations, MTTF, hazard function λ ( t ) \lambda(t) λ ( t ) ) Primary domain items: production systems, facilities, quality, ergonomics, work design, and systems engineering.

Engineering Economics • Discrete compounding interest tables ( i = 0.5 % i = 0.5\% i = 0.5% to 50 % 50\% 50% ); • Equivalence factor formulas ( ( F / P , i , n ) (F/P, i, n) ( F / P , i , n ) , ( P / F ) (P/F) ( P / F ) , ( A / P ) (A/P) ( A / P ) , ( P / A ) (P/A) ( P / A ) , ( F / A ) (F/A) ( F / A ) , ( A / F ) (A/F) ( A / F ) , ( P / G ) (P/G) ( P / G ) , ( A / G ) (A/G) ( A / G ) ); • Capitalized cost ( P = A / i P = A / i P = A / i ); • Depreciation models (Straight-Line, MACRS tables, Modified Accelerated Cost Recovery); • Cost estimation, break-even analysis, benefit-cost ratio ( Δ B / Δ C \Delta B / \Delta C Δ B /Δ C ), and inflation adjustment 9 to 14 questions on economic evaluation, alternative comparison, project lifecycle costing, and tax impacts.

Probability and Statistics • Measures of central tendency, sample variance, standard deviation; • Permutations ( n P r nPr n P r ) and combinations ( n C r nCr n C r ); • Discrete distributions (Binomial, Poisson, Hypergeometric, Geometric); • Continuous distributions (Normal, Student's t t t , Chi-Square, Weibull, Exponential); • Standard Normal cumulative distribution table ( Z Z Z -table: − ∞ -\infty − ∞ to z z z ); • Confidence intervals for means, proportions, and variances; • One- and two-sample hypothesis testing ( z z z -test, t t t -test, paired t t t , F F F -test); • Linear regression ( y = β ^ 0 + β ^ 1 x y = \hat{\beta}_0 + \hat{\beta}_1 x y = β ^ ​ 0 ​ + β ^ ​ 1 ​ x ), correlation coefficient ( r r r ); • One-way ANOVA tables and sum of squares formulations 10 to 15 questions on experimental design, statistical inferences, distribution fitting, and risk modeling.

Mathematics • Analytic geometry (equations of lines, planes, conic sections); • Differential and integral calculus, series approximations (Taylor, Maclaurin); • Linear algebra: matrix addition, multiplication, determinants, matrix inversion ( A − 1 = 1 det ⁡ ( A ) adj ( A ) A^{-1} = \frac{1}{\det(A)} \text{adj}(A) A − 1 = d e t ( A ) 1 ​ adj ( A ) ); • Systems of linear equations, eigenvalues, and eigenvectors 6 to 9 questions covering baseline mathematical tools, optimization constraints, and matrix transformations.

Ethics and Professional Practice • NCEES Model Rules of Professional Conduct; • Licensee obligations to society, employers, clients, and other licensees; • Conflict of interest disclosures, public safety mandates, and seal usage 4 to 6 questions regarding professional responsibility, ethical dilemmas, and licensure legal standards.

Safety • Hierarchy of controls (Elimination, Substitution, Engineering, Administrative, PPE); • OSHA hazard communication, Safety Data Sheets (SDS), permissible exposure limits Workplace safety, environmental regulations, and ergonomics questions.

Engineering Sciences • Statics (force balance Σ F = 0 \Sigma F = 0 Σ F = 0 , moment balance Σ M = 0 \Sigma M = 0 Σ M = 0 ); • Dynamics (kinematics, work-energy, momentum); • Fluid mechanics (continuity equation, Bernoulli's equation); • Thermodynamics (first law, heat transfer rate Q ˙ = k A Δ T / L \dot{Q} = kA\Delta T / L Q ˙ ​ = k A Δ T / L ); • Electrical circuits (Ohm's law V = I R V = IR V = I R , equivalent resistance, DC/AC power) 4 to 6 general engineering questions testing interdisciplinary technical foundations.

3. NCEES Calculator Policy and Approved Hardware

Calculators are strictly regulated to eliminate wireless communication, symbolic algebraic manipulation, and unvetted memory storage. Using an unauthorized model results in confiscation and immediate exam invalidation.

The Approved Model Families

NCEES explicitly lists the permitted calculator lines:

Texas Instruments (TI):

All TI-30X models (e.g., TI-30Xa, TI-30X IIS, TI-30XS MultiView).

All TI-36X models (most notably the TI-36X Pro ).

Casio:

All fx-115 models (e.g., fx-115 ES Plus, fx-115 MS).

All fx-991 models (e.g., fx-991EX ClassWiz, fx-991CW).

Hewlett-Packard (HP):

HP 33s and HP 35s (supporting Reverse Polish Notation - RPN).

Tip

The TI-36X Pro and the Casio fx-115 ES Plus / fx-991EX are the industry standards for the FE exam. Both feature multi-line "MathPrint" displays that render mathematical fractions and exponents exactly as they appear in textbooks, dramatically reducing typographical syntax errors.

4. Advanced Calculator Routines for Industrial Engineers

Relying on manual pencil-and-paper scratch calculations for advanced operations is a primary contributor to time exhaustion. Modern approved scientific calculators contain dedicated numerical coprocessors that can perform four high-yield engineering tasks in seconds:

1. Two-Variable Linear Regression ( y = a + b x y = a + bx y = a + b x )

In demand forecasting, learning curve estimation, and quality calibration, problems frequently require fitting a least-squares regression line through historical data:

Manual Method: Calculating Σ x , Σ y , Σ x 2 , Σ x y \Sigma x, \Sigma y, \Sigma x^2, \Sigma xy Σ x , Σ y , Σ x 2 , Σ x y , computing slope b = n Σ x y − Σ x Σ y n Σ x 2 − ( Σ x ) 2 b = \frac{n\Sigma xy - \Sigma x \Sigma y}{n\Sigma x^2 - (\Sigma x)^2} b = n Σ x 2 − ( Σ x ) 2 n Σ x y − Σ x Σ y ​ , and solving for intercept a = y ˉ − b x ˉ a = \bar{y} - b\bar{x} a = y ˉ ​ − b x ˉ . This manual process consumes 3 to 5 minutes and invites arithmetic sign slips.

Calculator Workflow: Enter STAT mode → \rightarrow → select 2-Var or y = a + bx → \rightarrow → enter the ( x , y ) (x, y) ( x , y ) coordinate pairs into the spreadsheet list → \rightarrow → retrieve coefficients a a a (intercept), b b b (slope), and r r r (correlation coefficient) instantly. Furthermore, you can use the regression prediction function ( y ^ \hat{y} y ^ ​ ) to forecast future periods directly.

2. Matrix Operations (Determinants, Inversion, and Multiplication)

Matrix algebra is central to Markov transition matrices, input-output models, and systems of linear equations:

Manual Method: Inverting a 3 × 3 3 \times 3 3 × 3 matrix by finding the matrix of minors, cofactors, adjugate, and dividing by the determinant requires 5 to 7 minutes of meticulous calculation.

Calculator Workflow: Enter MATRIX mode → \rightarrow → define Matrix [ A ] [A] [ A ] and [ B ] [B] [ B ] → \rightarrow → compute det ⁡ ( [ A ] ) \det([A]) det ([ A ]) , [ A ] − 1 [A]^{-1} [ A ] − 1 , or [ A ] × [ B ] [A] \times [B] [ A ] × [ B ] with a single keystroke. In steady-state Markov chain equations where you solve π P = π \pi P = \pi π P = π , matrix routines reduce a multi-equation linear system to simple matrix operations.

3. Numerical Equation Solving (Root Finding)

Engineering Economics problems frequently task candidates with finding the internal rate of return ( i ∗ i^* i ∗ ) or solving non-linear break-even equations where the variable is trapped in exponents: 0 = − P + A [ ( 1 + i ) n − 1 i ( 1 + i ) n ] 0 = -P + A\left[\frac{(1+i)^n - 1}{i(1+i)^n}\right] 0 = − P + A [ i ( 1 + i ) n ( 1 + i ) n − 1 ​ ]

Manual Method: Iterative trial-and-error using discrete compound interest tables, testing multiple interest rates and linearly interpolating.

Calculator Workflow: Use the num-solv (TI) or SOLVE (Casio) routine. Type the exact equation using the variable [ x ] [x] [ x ] , enter an initial seed estimate (e.g., x = 0.10 x = 0.10 x = 0.10 for 10%), and press solve. The calculator executes a Newton-Raphson numerical algorithm and converges on the exact root in 2 to 4 seconds.

4. Direct Statistical Distribution Evaluation

Rather than looking up cumulative probabilities in the Reference Handbook Z Z Z -table or t t t -table, models such as the TI-36X Pro and Casio fx-991EX allow you to compute cumulative normal probabilities directly:

Enter the distribution menu → \rightarrow → select Normal CDF → \rightarrow → input lower bound, upper bound, mean ( μ \mu μ ), and standard deviation ( σ \sigma σ ). The calculator returns the exact integral Φ ( z ) \Phi(z) Φ ( z ) without requiring manual z z z -score transformation or table interpolation.

5. Strategic Protocols for Calculation Precision

Mathematical errors on the FE exam rarely stem from conceptual ignorance; they arise from calculation discipline breakdowns under time stress:

Utilize Variable Memory Registers: Never re-type intermediate decimal values or round off intermediate results on your scratch booklet. The multi-line approved models (TI-36X Pro, TI-30XS/XB MultiView, Casio fx-115/fx-991) provide several labeled storage registers (typically A , B , C , D , E , F , x , y , z A, B, C, D, E, F, x, y, z A , B , C , D , E , F , x , y , z ); the older single-memory TI-30Xa has only one. Store intermediate answers directly using the STO key. Prematurely rounding an intermediate calculation from 0.142857 0.142857 0.142857 to 0.14 0.14 0.14 can skew your final answer sufficiently to deviate from the correct answer choice.

Rigorous Dimensional Analysis: Industrial engineering formulas routinely mix mismatched time bases and volumetric units. For example, takt time divides daily operating time (often given in hours or shifts) by daily customer demand (units). Failure to convert hours to seconds before dividing yields an answer off by a factor of 60 or 3,600—a classic distractor deliberately planted in the multiple-choice options.

Bring a Redundant Calculator: NCEES explicitly permits storing spare calculators and covers with your personal belongings. Note the limit: during an unscheduled break you may access only beverages, food, feminine hygiene products, Pearson Comfort Aid List items, and pre-approved timed medication — not a spare calculator. Plan to swap a failed calculator during the scheduled break, or notify the test administrator immediately if equipment fails. The on-screen TI-30XS in the exam software is the built-in fallback.