Study guide
16.1 Cognitive Engineering, Human-Machine Interface, Displays, and Controls
FE Industrial and Systems Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Overview, CBT Strategy & Handbook Navigation
1.1 FE Industrial Exam Structure, CBT Logistics, and Pacing 1.2 Using the NCEES FE Reference Handbook and Approved Calculators
2 Chapter 2: Mathematics for Industrial Engineers
2.1 Analytic Geometry, Coordinate Systems, and Trigonometry 2.2 Calculus: Differential, Integral, and Series Approximations 2.3 Linear Algebra: Matrix Operations, Systems of Equations, and Vectors
3 Chapter 3: Engineering Sciences Core
3.1 Thermodynamics Fundamentals and Fluid Flow Principles 3.2 Statics, Dynamics, and Mechanics of Materials Core 3.3 Electrical Circuits, DC/AC Analysis, and Power in Industrial Systems
4 Chapter 4: Ethics and Professional Practice
4.1 NCEES Model Rules of Professional Conduct and Technical Society Ethics 4.2 Engineering Licensure, Public Welfare, and Professional Liability 4.3 Engineering Contracts, Intellectual Property, and Conflicts of Interest
5 Chapter 5: Engineering Economics
5.1 Time Value of Money, Discount Factors, and Equivalence 5.2 Evaluating Alternatives: Present Worth, Equivalent Annual Cost, and IRR 5.3 Incremental Rate of Return, Replacement Analysis, and Break-Even 5.4 Depreciation Methods, MACRS, Income Taxes, and Inflation
6 Chapter 6: Probability Foundations & Distributions
6.1 Basic Probability Concepts, Conditional Probability, and Bayes' Theorem 6.2 Discrete Probability Distributions 6.3 Continuous Probability Distributions
7 Chapter 7: Statistical Inference, Regression & Design of Experiments
7.1 Sampling Distributions, Central Limit Theorem, and Confidence Intervals 7.2 Hypothesis Testing: Means, Proportions, and Variances 7.3 Linear Regression, Correlation Analysis, and Design of Experiments (ANOVA)
8 Chapter 8: Data, Logic, Modeling & Linear Programming
8.1 Optimization Modeling: Decision Variables, Objectives, and Constraints 8.2 Linear Programming: Graphical Solutions and Simplex Fundamentals 8.3 Duality, Sensitivity Analysis, and Integer Linear Programming 8.4 Data, Logic Development, and Analytics
9 Chapter 9: Stochastic Models & Simulation
9.1 Queuing Theory: Little's Law, M/M/1, and Multi-Server Systems 9.2 Discrete-Time Markov Chains: Transition Matrices and Steady-State Probabilities 9.3 Discrete-Event Simulation Principles and Monte Carlo Modeling
10 Chapter 10: Engineering Management, Project Planning & Performance Measurement
10.1 Organizational Structure, Leadership, and Worker Motivation Theories 10.2 Project Management: WBS, Critical Path Method (CPM), PERT, and Crashing 10.3 Earned Value Management (EVM), Decision Trees, and Risk Preference 10.4 Performance Measurement: Productivity, KPIs, Wage Systems, and the Balanced Scorecard
11 Chapter 11: Manufacturing & Production Systems
11.1 Manufacturing Processes, Material Processing, and Tolerancing 11.2 Assembly Line Balancing, Takt Time, Cycle Time, and Throughput 11.3 Sustainable Manufacturing, Waste Minimization, and Life-Cycle Assessment
12 Chapter 12: Production Planning, Inventory Control & Sequencing
12.1 Demand Forecasting Methods and Forecast Error Tracking 12.2 Aggregate Planning, Master Production Scheduling (MPS), and MRP 12.3 Deterministic Inventory Models: EOQ, EPQ, and Safety Stock 12.4 Job Sequencing, Dispatching Rules, and Flow Shop Scheduling
13 Chapter 13: Lean Systems & Theory of Constraints
13.1 Lean Foundations: Value Stream Mapping, Seven Wastes, and 5S 13.2 Pull Systems, Kanban, Just-In-Time (JIT), and SMED Setup Reduction 13.3 Theory of Constraints: Bottleneck Identification and Drum-Buffer-Rope
14 Chapter 14: Facilities Planning & Material Handling
14.1 Facility Location Analysis: Qualitative Factor Rating and Centroid Method 14.2 Facility Layout Design and Flow Analysis 14.3 Material Handling Equipment, Warehousing, and AS/RS
15 Chapter 15: Supply Chain Design & Logistics
15.1 Supply Chain Network Architecture and Transportation Modes 15.2 Distribution Strategies, Cross-Docking, and Vehicle Routing 15.3 The Bullwhip Effect, Risk Pooling, and Supply Chain Coordination
16 Chapter 16: Human Factors & Cognitive Ergonomics
16.1 Cognitive Engineering, Human-Machine Interface, Displays, and Controls 16.2 Anthropometric Principles, Percentile Design, and Biomechanical Posture 16.3 Environmental Ergonomics: Industrial Noise, Lighting, and Heat Stress
17 Chapter 17: Physical Ergonomics & Workplace Safety
17.1 Physical Ergonomics: The NIOSH Manual Lifting Equation 17.2 Cumulative Trauma Disorders and Postural Assessment 17.3 Workplace Safety: OSHA Standards, Hazard Analysis, and Control Hierarchy
18 Chapter 18: Work Design & Measurement
18.1 Methods Engineering, Process Charting, and Principles of Motion Economy 18.2 Direct Stopwatch Time Study: Observed Time, Performance Rating, and Allowances 18.3 Predetermined Time Systems, Work Sampling, and Learning Curves
19 Chapter 19: Quality Management, Six Sigma & Analytical Tools
19.1 Quality Philosophies, Total Quality Management, and Cost of Quality 19.2 Six Sigma DMAIC Methodology and Quality Function Deployment 19.3 The Seven Basic Quality Tools, Root Cause Analysis, and Taguchi Loss Function
20 Chapter 20: Statistical Process Control
20.1 Statistical Process Control Principles, Variation, and Run Rules 20.2 Variable Control Charts: X-bar & R, X-bar & S, and Individual-Moving Range 20.3 Attribute Control Charts: Defectives (p, np) and Defects (c, u)
21 Chapter 21: Process Capability & Acceptance Sampling
21.1 Process Capability Indices and Defect Levels 21.2 Acceptance Sampling Concepts and Operating Characteristic Curves 21.3 Sampling Risks, AQL, LTPD, and Standard Sampling Plans
22 Chapter 22: Systems Engineering & Life-Cycle Management
22.1 The Systems Engineering V-Model, Stakeholder Requirements, and Functional Architecture 22.2 Configuration Management, Interface Control, and Verification & Validation 22.3 Life-Cycle Costing, Maintainability, and System Availability
23 Chapter 23: Reliability Engineering & Risk Analysis
23.1 Reliability Mathematics, Hazard Rates, and the Bathtub Curve 23.2 System Reliability Configurations: Series, Parallel, and k-out-of-n Systems 23.3 Failure Modes and Effects Analysis and Fault Tree Analysis
16.1 Cognitive Engineering, Human-Machine Interface, Displays, and Controls
Key Takeaways Explain This Topic AI
The human information processing pipeline transitions stimuli through sensory registers (iconic < 0.5 s, echoic 2-4 s), working memory (Miller's 7 ± 2 chunks, decaying within 10-20 seconds without rehearsal), long-term memory, and cognitive decision making before motor execution.
Rasmussen's SRK framework classifies operator behavior into skill-based (automatic sensorimotor routines), rule-based (stored procedural if-then rules), and knowledge-based actions (conscious, resource-intensive reasoning during unfamiliar operational anomalies).
The Hick-Hyman Law models choice reaction time as RT = a + b * log2(n), whereas Fitts' Law models movement time as MT = a + b * log2(2D/W), establishing the quantitative Index of Difficulty (ID) in human-machine interfaces.
James Reason's Swiss Cheese model distinguishes between active failures committed at the operational sharp end and latent conditions embedded in system design, classifying errors into unintended slips/lapses versus intended planning mistakes.
The control-display ratio (C/D = control movement / display movement) governs interface sensitivity: high C/D ratios provide high precision for fine adjustments, whereas low C/D ratios provide high sensitivity for rapid, coarse slewing across large displays.
Last updated: September 2026
In high-throughput industrial facilities, automated manufacturing plants, and complex chemical processing units, the human operator functions as the ultimate supervisory controller, decision maker, and safety barrier. Cognitive ergonomics addresses the mental capabilities, cognitive limitations, and psychological workload of workers interacting with machines, computerized interfaces, and automated control loops. Designing systems that align with human neurocognitive architecture significantly reduces error rates, lowers mental fatigue, and prevents catastrophic industrial accidents.
1. The Human Information Processing Model
The standard engineering model of human cognition conceptualizes the human operator as an information processing channel that filters, transforms, stores, and responds to sensory inputs: Human Information Processing Architecture
- ┌─────────────────┐ ┌────────────────────────┐ ┌───────────────────────┐
- │ Sensory Inputs │ ──> │ Sensory Registers │ ──> │ Selective Attention │
- │ (Visual, Audio) │ │ Visual: 0.5 s, Audio: 3s│ │ Filter / Bottleneck │
- └─────────────────┘ └────────────────────────┘ └───────────┬───────────┘
- │
- v
- ┌─────────────────┐ ┌────────────────────────┐ ┌───────────────────────┐
- │ Motor Execution │ <── │ Decision Making │ <── │ Working Memory (WM) │
- │ Muscles/Controls│ │ & Response Selection │ <── │ (7 ± 2 items, 15-20 s) │
- └─────────────────┘ └───────────┬────────────┘ └───────────▲───────────┘
- │ │ Retrieval
- │ Encoding / Feedback │ & Storage
- v v
- ┌──────────────────────────────────────────────────────┐
- │ Long-Term Memory (LTM) │
- │ Semantic, Episodic, Procedural Mental Models │
- └──────────────────────────────────────────────────────┘
- Stages of Cognitive Processing
Sensory Receptors and Registers : Environmental physical stimuli are converted into neurological signals. Iconic memory (visual) persists for approximately 0.5 seconds 0.5\text{ seconds} 0.5 seconds ; echoic memory (auditory) persists for 2 to 4 seconds 2\text{ to }4\text{ seconds} 2 to 4 seconds . This buffer permits brief sensory pattern recognition.
Perception and Selective Attention : Attention acts as a capacity-limited filter. Stimuli are parsed using top-down expectations (mental models) and bottom-up sensory salience (brightness, loudness, flashing indicators).
Working Memory (Short-Term Memory) : The conscious workspace where active calculation, synthesis, and reasoning occur. As formalized by George Miller (1956), working memory capacity is limited to 7 ± 2 7 \pm 2 7 ± 2 chunks of unorganized information (modern cognitive research shows 4 ± 1 4 \pm 1 4 ± 1 chunks for active complex manipulation). Information in working memory decays within 10 to 20 seconds 10\text{ to }20\text{ seconds} 10 to 20 seconds unless refreshed through active rehearsal.
Long-Term Memory (LTM) :
Semantic Memory : Context-free factual knowledge, system rules, engineering principles.
Episodic Memory : Temporally tagged personal operational experiences and historical shift events.
Procedural Memory : Motor and cognitive skills executed automatically without conscious verbalization (e.g., typing, emergency shutdown valve actuation sequence).
Decision Making and Heuristics : Cognitive shortcuts applied under time pressure. Prone to systematic cognitive biases:
Confirmation Bias : Seeking out information that confirms a preconceived diagnosis while ignoring conflicting sensor readouts.
Availability Heuristic : Assessing probability based on how easily similar past emergencies come to mind.
Anchoring : Fixating on initial readings or early estimates despite subsequent divergent data.
Response Selection and Execution : Selecting a motor action plan and transmitting neuro-muscular commands to hands, feet, or vocal cords.
2. Rasmussen's Skills, Rules, and Knowledge (SRK) Framework
Jens Rasmussen categorized human performance in engineering and supervisory tasks into three distinct cognitive tiers:
Performance Tier Cognitive Mechanism Control Feedback Loop Operator Experience Level Typical Error Mode
Skill-Based Behavior Subconscious, automated sensorimotor routines. Operates in real time with minimal mental demand. Continuous closed-loop sensory feedback. Highly trained, experienced experts. Slips and Lapses : Inadvertent execution errors, attention capture, mode errors.
Rule-Based Behavior Conscious application of memorized or documented procedural rules (e.g., standard operating procedures, alarm response cards). Recognition-primed classification (IF condition THEN action). Proficient technicians following established protocols. Rule-Based Mistakes : Misapplying a valid rule to the wrong situation, or following a flawed procedure.
Knowledge-Based Behavior Conscious, analytical, slow, and effortful conceptual problem solving in novel or unprecedented system states. Open-loop conceptual formulation from explicit mental models. Novices, or experts facing unprecedented cascading failures. Knowledge-Based Mistakes : Incomplete mental models, confirmation bias, resource exhaustion. Rasmussen's SRK Cognitive Ladder
- [Novel System State / Crisis] ──> Knowledge-Based (Analytical Goals & Mental Models)
- ▲
- │ Escalation under ambiguity
- [Familiar Pattern Recognized] ──> Rule-Based (IF-THEN Procedures & Checklists)
- ▲
- │ Disturbance / Interruption
- [Routine Automated Operation] ──> Skill-Based (Subconscious Sensorimotor Coordination)
- 3. Quantitative Response Time Models
- Hick-Hyman Law for Choice Reaction Time
When an operator must choose a discrete response from n n n possible alternatives, the choice reaction time ( R T RT RT ) increases logarithmically with the amount of information (entropy) transmitted: R T = a + b ⋅ H T RT = a + b \cdot H_T RT = a + b ⋅ H T
For n n n equiprobable stimuli ( p i = 1 / n p_i = 1/n p i = 1/ n ): H T = log 2 ( n ) ⟹ R T = a + b ⋅ log 2 ( n ) H_T = \log_2(n) \implies RT = a + b \cdot \log_2(n) H T = lo g 2 ( n ) ⟹ RT = a + b ⋅ lo g 2 ( n )
where:
R T RT RT = Total reaction time (seconds or milliseconds)
a a a = Simple reaction time (baseline sensory detection and motor nerve conduction delay, typically 0.15 − 0.25 s 0.15 - 0.25\text{ s} 0.15 − 0.25 s )
b b b = Processing speed per bit of decision uncertainty (slope coefficient, typically 0.15 − 0.25 s/bit 0.15 - 0.25\text{ s/bit} 0.15 − 0.25 s/bit )
H T H_T H T = Information content transmitted, measured in bits: H T = ∑ i = 1 n p i log 2 ( 1 / p i ) H_T = \sum_{i=1}^n p_i \log_2(1/p_i) H T = ∑ i = 1 n p i lo g 2 ( 1/ p i )
Fitts' Law for Movement Time (Motor Target Acquisition)
Fitts' Law models the time required to rapidly move a limb or pointing device (e.g., stylus, mouse cursor, finger) a distance D D D to a target of width W W W : M T = a + b ⋅ log 2 ( 2 D W ) = a + b ⋅ I D MT = a + b \cdot \log_2\left( \frac{2D}{W} \right) = a + b \cdot ID MT = a + b ⋅ lo g 2 ( W 2 D ) = a + b ⋅ I D
where:
- M T MT MT = Movement time (seconds)
- D D D = Distance (amplitude) from starting point to the center of the target
- W W W = Width of the target along the dimension of motion
I D = log 2 ( 2 D / W ) ID = \log_2(2D/W) I D = lo g 2 ( 2 D / W ) = Index of Difficulty, expressed in bits
a , b a, b a , b = Empirically fitted regression constants specific to the body limb and control device
Engineering Design Takeaway : To minimize operator task completion time on touchscreen interfaces and control boards, critical buttons must have large target widths ( W W W ) and be placed at short distances ( D D D ) from neutral resting positions.
4. Cognitive Workload and Measurement: NASA-TLX
Mental workload reflects the proportion of an operator's limited cognitive processing capacity demanded by a set of concurrent tasks. When workload exceeds available mental bandwidth, error rates spike exponentially.
NASA Task Load Index (NASA-TLX)
The NASA-TLX is the gold-standard subjective multidimensional workload assessment instrument. It evaluates six independent subscales on a continuous 0 − 100 0 - 100 0 − 100 scale:
Mental Demand (MD) : How much mental and perceptual activity was required (e.g., thinking, calculating, deciding)?
Physical Demand (PD) : How much physical activity was required (e.g., pushing, pulling, turning)?
Temporal Demand (TD) : How much time pressure did you feel due to the pace or task rate?
Performance (OP) : How successful do you think you were in accomplishing the goals set by the experimenter?
Effort (EF) : How hard did you have to work (mentally and physically) to accomplish your level of performance?
Frustration Level (FR) : How insecure, discouraged, irritated, stressed, and annoyed versus secure and relaxed did you feel?
Two-Stage NASA-TLX Scoring
Weighting Stage : The operator performs 15 pairwise comparisons among the 6 subscales. The weight w i w_i w i for subscale i i i equals the number of times it was chosen as the more significant source of workload ( 0 ≤ w i ≤ 5 0 \le w_i \le 5 0 ≤ w i ≤ 5 ), such that: ∑ i = 1 6 w i = 15 \sum_{i=1}^6 w_i = 15 i = 1 ∑ 6 w i = 15
Rating Stage : The operator assigns a numerical score R i ∈ [ 0 , 100 ] R_i \in [0, 100] R i ∈ [ 0 , 100 ] to each subscale along a 20-interval bipolar visual analog scale.
Composite Weighted Score Calculation : Score TLX = ∑ i = 1 6 w i ⋅ R i 15 \text{Score}_{\text{TLX}} = \frac{\sum_{i=1}^6 w_i \cdot R_i}{15} Score TLX = 15 ∑ i = 1 6 w i ⋅ R i
Raw TLX (RTLX) : When time constraints prevent pairwise comparisons, the unweighted arithmetic mean is used: RTLX = 1 6 ∑ i = 1 6 R i \text{RTLX} = \frac{1}{6}\sum_{i=1}^6 R_i RTLX = 6 1 ∑ i = 1 6 R i .
Objective and Physiological Workload Metrics
Heart Rate Variability (HRV) : Spectral analysis of R-R intervals reveals that elevated cognitive workload suppresses parasympathetic nervous activity, significantly decreasing the spectral power peak around 0.1 Hz 0.1\text{ Hz} 0.1 Hz .
Pupillometry : Pupil diameter expands in direct proportion to working memory load and mathematical processing demand.
Secondary Task Performance : Introducing a secondary task (e.g., time estimation, auditory tone discrimination) measures residual spare capacity. Degradation of secondary task performance serves as an early indicator of cognitive overload before primary task breakdown occurs.
- 5. Human Error Taxonomy & Reason's Swiss Cheese Model
- Reason's Swiss Cheese Model of System Accidents
James Reason conceptualized high-hazard industrial systems as defended by multiple layers of engineering and administrative barriers (the slices of cheese). Each barrier contains inherent, shifting weaknesses and gaps (the holes):
Latent Conditions : Systemic organizational flaws embedded deep within management decisions, poor ergonomic layouts, defective software logic, inadequate staffing, and deferred maintenance. They lie dormant for months or years.
Active Failures : Unsafe acts (slips, lapses, mistakes, violations) committed by frontline operators at the operational "sharp end" in direct contact with the machinery.
An accident occurs only when the holes across all defensive layers momentarily align, opening a catastrophic trajectory of opportunity. Reason's Swiss Cheese Model
- Organizational Unsafe Defective Operator Loss Event
- Decisions Supervision Protections Active Failure / Hazard
- │ │ │ │ ▲
- ▼ ▼ ▼ ▼ │
- ┌───┐ ┌───┐ ┌───┐ ┌───┐ │
- │ O │ │ │ │ │ │ │ │
- │ │ │ O │ │ │ │ │ │
- │ │ ══════════>│ │══════════>│ O │══════════>│ O │════════════╪═══ Trajectory
- │ │ │ │ │ │ │ │ │ of Accident
- └───┘ └───┘ └───┘ └───┘ │
- Latent Latent Latent Active │
- Condition Condition Condition Failure │
- Detailed Taxonomy of Human Unsafe Acts Classification of Human Error (Reason / Rasmussen)
- Unsafe Acts
- ├── 1. Unintended Actions (Execution Failures)
- │ ├── Slips: Action not performed as intended due to physical execution breakdown
- │ │ (e.g., finger slips to adjacent switch, turning dial wrong way)
- │ └── Lapses: Memory failure or omission of an intended step
- │ (e.g., forgetting to re-arm an interlock, skipping a checklist item)
- └── 2. Intended Actions (Planning Failures & Deviations)
- ├── Mistakes: The plan is fundamentally deficient; action proceeds as planned but fails
- │ ├── Rule-Based: Misapplication of a good rule, or faithful execution of a bad rule
- │ └── Knowledge-Based: Misinterpreting a novel anomaly due to inaccurate mental model
- └── Violations: Deliberate departure from established rules and protocols
- ├── Routine Violations: Common shortcuts tolerated by workplace culture
- ├── Exceptional Violations: Ad-hoc deviations during unprecedented crises
- └── Optimizing Violations: Deviations performed for personal convenience or speed
- 6. Human-Machine Interface (HMI) Design Principles
- The Principles of Compatibility
Compatibility describes the degree to which system interfaces match human perceptual and behavioral expectations. High compatibility accelerates learning, shortens reaction times, and drastically suppresses error rates.
Compatibility Type Definition Engineering Implementation Example
Spatial Compatibility The physical arrangement of controls mirrors the physical arrangement of displays or machinery. Four stove burner control knobs arranged in a 2 × 2 2 \times 2 2 × 2 matrix matching the 2 × 2 2 \times 2 2 × 2 heating elements, rather than arranged in a single linear row.
Movement Compatibility The direction of control motion matches the expected direction of indicator movement or system response. Moving a rotary knob clockwise causes an analog gauge needle to move clockwise/upward, or causes the controlled parameter (e.g., pump speed) to increase.
Conceptual Compatibility Interface symbology, colors, and metaphors correspond to ingrained cultural and population stereotypes. Using red for emergency stops/high danger, amber/yellow for caution/advisory, green for normal/operational; skull icon for toxicity.
Movement Compatibility Rules
Warrick's Principle : The indicator pointer moves in the same direction as the side of the control knob closest to the display scale.
Scale-Side Principle : If the control is located on one side of a linear scale, moving the control edge adjacent to the scale causes the pointer to track that edge's direction.
Population Stereotypes :
Rotary knobs: Clockwise rotation ⟹ \implies ⟹ increase in value, volume, or flow.
Toggle switches: In North America, flipping toggle UP ⟹ \implies ⟹ ON/START , flipping toggle DOWN ⟹ \implies ⟹ OFF/STOP . (Note: In the UK and parts of Europe, down traditionally means on).
Valves: Counterclockwise ⟹ \implies ⟹ OPEN; Clockwise ⟹ \implies ⟹ CLOSED ("righty-tighty, lefty-loosey").
- 7. Visual and Auditory Displays
- Visual Display Selection
Display Class Best Used For Engineering Strengths & Limitations
Quantitative Digital Display Reading exact, discrete numerical values (e.g., pressure = 142.7 kPa 142.7\text{ kPa} 142.7 kPa ). Eliminates interpolation errors and parallax; poor for tracking trends, rates of change, or rapid fluctuations.
Quantitative / Qualitative Analog Dial Rapid check reading, observing rates of change, detecting directional trends, dynamic tracking. Excellent at displaying normal operating zones (green/yellow/red arcs); susceptible to parallax errors and imprecise numerical extraction.
Status Indicators / Annunciator Lights Displaying binary system states (ON/OFF, FAULT/CLEAR). Must possess distinct luminance contrast ( > 3 : 1 > 3:1 > 3 : 1 against ambient) and recognizable color coding.
Check Reading and Gestalt Grouping
In complex control rooms with banks of analog meters, gauges should be physically aligned and zeroed such that under normal, safe operational conditions, all pointers orient in the identical direction (typically 12 o'clock or 9 o'clock) . An abnormal condition instantly disrupts visual symmetry, allowing the human operator's preattentive visual processing to detect anomalies in milliseconds without reading individual values. Check Reading Alignment (Normal vs Anomaly)
- Normal Operation: Symmetry Intact Abnormal Condition: Symmetry Broken
- ┌─┐ ┌─┐ ┌─┐ ┌─┐ ┌─┐ ┌─┐ ┌─┐ ┌─┐
- │▲│ │▲│ │▲│ │▲│ │▲│ │►│ │▲│ │▲│
- └─┘ └─┘ └─┘ └─┘ └─┘ └─┘ └─┘ └─┘
- 1 2 3 4 1 2 3 4
All needles point to 12 o'clock Meter 2 needle deflects right:
- Instant perceptual verification Immediate preattentive visual alert
- Head-Up Displays (HUDs)
HUDs project optical symbology onto a transparent combiner glass directly in the operator's line of sight:
Optical Collimation : Light rays are focused to optical infinity ( > 6 m > 6\text{ m} > 6 m ), eliminating the 0.5 s 0.5\text{ s} 0.5 s accommodation and vergence delay required when shifting focus between external scenes and internal instrument panels.
Conformal Symbology : Artificial horizon lines and target vectors overlay 1 : 1 1:1 1 : 1 on real-world objects.
Human Factors Risks : Display clutter and cognitive tunneling (attentional capture where operators fixate on digital symbology and fail to perceive unexpected physical obstacles in the visual environment).
Auditory Displays and Alarms
Auditory signals are omnidirectional and demand immediate attention, making them ideal for high-urgency alarms:
Signal-to-Noise Ratio (SNR) : Auditory alarms must be set 15 to 25 dBA 15\text{ to }25\text{ dBA} 15 to 25 dBA above ambient background noise to guarantee 100% detection.
Ceiling Threshold : Sound levels should never exceed 100 − 110 dBA 100 - 110\text{ dBA} 100 − 110 dBA to prevent startle reflexes, panic responses, or acoustic trauma.
Auditory Masking : Ambient industrial noise with frequencies matching the alarm tone masks the signal; alarms must incorporate multiple distinct harmonic frequency components ( 500 − 3 , 000 Hz 500 - 3,000\text{ Hz} 500 − 3 , 000 Hz ).
Alarm Fatigue : Excessive nuisance alarms cause operators to consciously silence, ignore, or bypass safety warning horns.
- 8. Control Design Principles and Mechanics
- Control-Display Ratio (C/D Ratio)
The Control-Display (C/D) Ratio quantifies the relationship between the physical displacement of an input control and the resulting movement of the indicator on the display: C / D = Displacement of Control Displacement of Display = Δ C Δ D C/D = \frac{\text{Displacement of Control}}{\text{Displacement of Display}} = \frac{\Delta C}{\Delta D} C / D = Displacement of Display Displacement of Control = Δ D Δ C
For a rotary knob of radius R R R rotating through angle θ \theta θ (in radians) controlling a pointer moving a linear distance Δ D \Delta D Δ D : Δ C = R ⋅ θ = R ⋅ ( θ ∘ ⋅ π 180 ∘ ) ⟹ C / D = R ⋅ θ Δ D \Delta C = R \cdot \theta = R \cdot \left( \frac{\theta^\circ \cdot \pi}{180^\circ} \right) \implies C/D = \frac{R \cdot \theta}{\Delta D} Δ C = R ⋅ θ = R ⋅ ( 18 0 ∘ θ ∘ ⋅ π ) ⟹ C / D = Δ D R ⋅ θ Control-Display Trade-Off
- High C/D Ratio (e.g., C/D = 3.0) Low C/D Ratio (e.g., C/D = 0.2)
- Low Interface Sensitivity - High Interface Sensitivity
- Large control motion produces - Small control motion produces
- small display movement large display movement
- Optimized for: Precision Fine Tuning - Optimized for: Coarse, Rapid Slewing
- Forms of Control Resistance
Providing physical resistance in control hardware yields essential kinesthetic and proprioceptive feedback to the operator:
Elastic (Spring) Resistance : Force is directly proportional to displacement ( F = k ⋅ x F = k \cdot x F = k ⋅ x ). Provides continuous muscle tension feedback regarding control deflection; automatically returns the control to a neutral center position.
Viscous Damping Resistance : Force is directly proportional to movement velocity ( F = c ⋅ v F = c \cdot v F = c ⋅ v ). Absorbs rapid erratic twitches, damps physiological tremors, and prevents gross overshooting during tracking.
Inertial Resistance : Force is proportional to acceleration ( F = m ⋅ a F = m \cdot a F = m ⋅ a ). Resists sudden changes in movement speed, promoting smooth continuous cranking.
Coulomb (Static/Frictional) Resistance : Constant resistive force opposing initial movement. Prevents accidental actuation caused by light brush or structural vibration, but excessive friction introduces stick-slip jerkiness.
Preventing Accidental Control Activation
To prevent inadvertent actuation of critical actuators (e.g., emergency stops, chemical dump valves, explosive pyrotechnic initiators):
Recessing : Mounting pushbuttons flush or sunken beneath the control panel surface.
Shielding and Covers : Spring-loaded flip covers, physical barriers, or mechanical collars that require two distinct actions.
Location and Orientation : Isolating critical controls outside the normal sweep envelope of routine operational tasks.
High Actuation Force : Sizing spring detents so that incidental brushing cannot depress the switch.
Two-Hand Controls : Requiring concurrent, continuous depression of two separate buttons spaced ≥ 50 cm \ge 50\text{ cm} ≥ 50 cm apart (e.g., stamping presses to keep hands out of pinch points).
Keylocks and Mechanical Interlocks : Requiring key insertion or sequential release levers (dead-man switches).
- 9. Step-by-Step Worked Engineering Calculations
- Worked Example 16.1.1: Hick-Hyman and Fitts' Law Evaluation
Problem : An industrial human-machine interface engineer is redesigning a chemical transfer station panel. The current control panel presents an operator with 8 8 8 equiprobable routing valves. From empirical baseline testing, the operator's simple sensory-motor reaction delay is a = 0.20 s a = 0.20\text{ s} a = 0.20 s , and the cognitive processing slope is b = 0.16 s/bit b = 0.16\text{ s/bit} b = 0.16 s/bit . Once the decision is made, the operator moves their hand from a central keypad across a distance D = 32 cm D = 32\text{ cm} D = 32 cm to strike a rectangular valve button of width W = 4 cm W = 4\text{ cm} W = 4 cm . The Fitts' Law coefficients for hand movement are a F = 0.10 s a_F = 0.10\text{ s} a F = 0.10 s and b F = 0.14 s/bit b_F = 0.14\text{ s/bit} b F = 0.14 s/bit .
Calculate the transmitted cognitive information H T H_T H T and the choice reaction time R T RT RT .
Calculate the Index of Difficulty ( I D ID I D ) and movement time ( M T MT MT ) for button acquisition.
Calculate the total response time ( T R T = R T + M T TRT = RT + MT TRT = RT + MT ).
Solution :
Step 1: Compute Transmitted Information and Choice Reaction Time Since all n = 8 n = 8 n = 8 choices are equiprobable: H T = log 2 ( n ) = log 2 ( 8 ) = 3.0 bits H_T = \log_2(n) = \log_2(8) = 3.0\text{ bits} H T = lo g 2 ( n ) = lo g 2 ( 8 ) = 3.0 bits
Applying the Hick-Hyman Law: R T = a + b ⋅ H T = 0.20 s + ( 0.16 s/bit ) ( 3.0 bits ) = 0.20 + 0.48 = 0.68 s RT = a + b \cdot H_T = 0.20\text{ s} + (0.16\text{ s/bit})(3.0\text{ bits}) = 0.20 + 0.48 = 0.68\text{ s} RT = a + b ⋅ H T = 0.20 s + ( 0.16 s/bit ) ( 3.0 bits ) = 0.20 + 0.48 = 0.68 s
Step 2: Compute Fitts' Law Index of Difficulty and Movement Time I D = log 2 ( 2 D W ) = log 2 ( 2 × 32 cm 4 cm ) = log 2 ( 64 4 ) = log 2 ( 16 ) = 4.0 bits ID = \log_2\left( \frac{2D}{W} \right) = \log_2\left( \frac{2 \times 32\text{ cm}}{4\text{ cm}} \right) = \log_2\left( \frac{64}{4} \right) = \log_2(16) = 4.0\text{ bits} I D = lo g 2 ( W 2 D ) = lo g 2 ( 4 cm 2 × 32 cm ) = lo g 2 ( 4 64 ) = lo g 2 ( 16 ) = 4.0 bits
Applying Fitts' Law: M T = a F + b F ⋅ I D = 0.10 s + ( 0.14 s/bit ) ( 4.0 bits ) = 0.10 + 0.56 = 0.66 s MT = a_F + b_F \cdot ID = 0.10\text{ s} + (0.14\text{ s/bit})(4.0\text{ bits}) = 0.10 + 0.56 = 0.66\text{ s} MT = a F + b F ⋅ I D = 0.10 s + ( 0.14 s/bit ) ( 4.0 bits ) = 0.10 + 0.56 = 0.66 s
Step 3: Calculate Total Operator Response Time T R T = R T + M T = 0.68 s + 0.66 s = 1.34 s TRT = RT + MT = 0.68\text{ s} + 0.66\text{ s} = 1.34\text{ s} TRT = RT + MT = 0.68 s + 0.66 s = 1.34 s
Worked Example 16.1.2: NASA-TLX Composite Mental Workload Derivation
Problem : A control room operator completes a supervisory monitoring simulation during a power grid emergency. Following the task, the operator performs the 15 pairwise comparisons among the six NASA-TLX dimensions to establish subscale weights, and then rates each subscale on the 0 to 100 visual analog scale. Calculate the overall composite weighted NASA-TLX workload score.
- Subscale Pairwise Tallies ( w i w_i w i ) Rating ( R i R_i R i )
- Mental Demand (MD) 5 85
- Physical Demand (PD) 0 20
- Temporal Demand (TD) 4 90
- Performance (OP) 2 40
- Effort (EF) 3 75
- Frustration (FR) 1 60
Solution :
Step 1: Verify Weight Summation ∑ i = 1 6 w i = 5 + 0 + 4 + 2 + 3 + 1 = 15 ✓ \sum_{i=1}^6 w_i = 5 + 0 + 4 + 2 + 3 + 1 = 15 \quad \checkmark i = 1 ∑ 6 w i = 5 + 0 + 4 + 2 + 3 + 1 = 15 ✓
- Step 2: Calculate Weighted Product for Each Subscale
- MD : 5 × 85 = 425 \text{MD}: 5 \times 85 = 425 MD : 5 × 85 = 425
- PD : 0 × 20 = 0 \text{PD}: 0 \times 20 = 0 PD : 0 × 20 = 0
- TD : 4 × 90 = 360 \text{TD}: 4 \times 90 = 360 TD : 4 × 90 = 360
- OP : 2 × 40 = 80 \text{OP}: 2 \times 40 = 80 OP : 2 × 40 = 80
- EF : 3 × 75 = 225 \text{EF}: 3 \times 75 = 225 EF : 3 × 75 = 225
- FR : 1 × 60 = 60 \text{FR}: 1 \times 60 = 60 FR : 1 × 60 = 60
Step 3: Calculate Total Sum and Weighted Average ∑ i = 1 6 w i R i = 425 + 0 + 360 + 80 + 225 + 60 = 1 , 150 \sum_{i=1}^6 w_i R_i = 425 + 0 + 360 + 80 + 225 + 60 = 1,150 i = 1 ∑ 6 w i R i = 425 + 0 + 360 + 80 + 225 + 60 = 1 , 150 Score TLX = 1 , 150 15 = 76.67 \text{Score}_{\text{TLX}} = \frac{1,150}{15} = 76.67 Score TLX = 15 1 , 150 = 76.67
Conclusion : The operator's composite weighted mental workload score is 76.7 76.7 76.7 out of 100 100 100 , indicating severe operational cognitive saturation driven predominantly by mental and temporal demand.
Worked Example 16.1.3: Control-Display Ratio and Linear Travel
Problem : A precision machining operator uses a rotary control knob of diameter d = 6.0 cm d = 6.0\text{ cm} d = 6.0 cm (radius R = 3.0 cm R = 3.0\text{ cm} R = 3.0 cm ) to position a laser crosshair along a digital inspection microscope screen. The interface requires a Control-Display (C/D) ratio of 2.5 2.5 2.5 for micro-positioning.
If the operator rotates the knob through an angle of 45 ∘ 45^\circ 4 5 ∘ , how far does the crosshair travel on the display?
What knob rotation angle θ \theta θ is required to slew the crosshair across a display distance of 12.0 cm 12.0\text{ cm} 12.0 cm ?
Solution :
Step 1: Calculate Display Movement for 45 ∘ 45^\circ 4 5 ∘ Rotation Convert angular rotation to radians: θ = 45 ∘ × π 180 ∘ = π 4 ≈ 0.7854 rad \theta = 45^\circ \times \frac{\pi}{180^\circ} = \frac{\pi}{4} \approx 0.7854\text{ rad} θ = 4 5 ∘ × 18 0 ∘ π = 4 π ≈ 0.7854 rad .
Compute the physical circumferential displacement of the control surface: Δ C = R ⋅ θ = ( 3.0 cm ) ( 0.7854 ) = 2.356 cm \Delta C = R \cdot \theta = (3.0\text{ cm})(0.7854) = 2.356\text{ cm} Δ C = R ⋅ θ = ( 3.0 cm ) ( 0.7854 ) = 2.356 cm
Using the definition of C/D ratio: C / D = Δ C Δ D ⟹ Δ D = Δ C C / D = 2.356 cm 2.5 = 0.942 cm = 9.42 mm C/D = \frac{\Delta C}{\Delta D} \implies \Delta D = \frac{\Delta C}{C/D} = \frac{2.356\text{ cm}}{2.5} = 0.942\text{ cm} = 9.42\text{ mm} C / D = Δ D Δ C ⟹ Δ D = C / D Δ C = 2.5 2.356 cm = 0.942 cm = 9.42 mm
Step 2: Calculate Required Knob Rotation for a 12.0 cm 12.0\text{ cm} 12.0 cm Display Travel Δ C = ( C / D ) × Δ D = 2.5 × 12.0 cm = 30.0 cm \Delta C = (C/D) \times \Delta D = 2.5 \times 12.0\text{ cm} = 30.0\text{ cm} Δ C = ( C / D ) × Δ D = 2.5 × 12.0 cm = 30.0 cm
Determine the required angular displacement: θ = Δ C R = 30.0 cm 3.0 cm = 10.0 radians \theta = \frac{\Delta C}{R} = \frac{30.0\text{ cm}}{3.0\text{ cm}} = 10.0\text{ radians} θ = R Δ C = 3.0 cm 30.0 cm = 10.0 radians θ ∘ = 10.0 rad × 180 ∘ π ≈ 572.96 ∘ ≈ 1.59 full rotations \theta^\circ = 10.0\text{ rad} \times \frac{180^\circ}{\pi} \approx 572.96^\circ \approx 1.59\text{ full rotations} θ ∘ = 10.0 rad × π 18 0 ∘ ≈ 572.9 6 ∘ ≈ 1.59 full rotations
10. NCEES Reference Handbook Tips & Exam Traps
Slip vs. Mistake Distinction : On the FE exam, pay close attention to operator intention. If the operator formulated the correct plan but inadvertently hit the wrong button or moved a lever too far, it is a slip (execution failure). If the operator intentionally hit the wrong button because they misdiagnosed the system state or misapplied a procedure, it is a mistake (planning failure).
C/D Ratio vs. Sensitivity Trap : Sensitivity is the reciprocal of the C/D ratio ( Sensitivity = 1 / [ C / D ] \text{Sensitivity} = 1 / [C/D] Sensitivity = 1/ [ C / D ] ). A high C/D ratio corresponds to low sensitivity (coarse control movement yields small display travel, ideal for fine precision). A low C/D ratio corresponds to high sensitivity (small control movement yields large display travel, ideal for rapid slewing).
Logarithm Bases in Human Performance Models : Hick-Hyman and Fitts' Law use base-2 logarithms ( log 2 \log_2 lo g 2 ), representing information in bits. Using natural log ( ln \ln ln ) or common log ( log 10 \log_{10} lo g 10 ) without converting will yield incorrect results. Remember: log 2 ( x ) = ln ( x ) ln ( 2 ) = log 10 ( x ) log 10 ( 2 ) \log_2(x) = \frac{\ln(x)}{\ln(2)} = \frac{\log_{10}(x)}{\log_{10}(2)} lo g 2 ( x ) = l n ( 2 ) l n ( x ) = l o g 10 ( 2 ) l o g 10 ( x ) .
Auditory Alarm Signal-to-Noise Requirement : An auditory alarm must be 15 to 25 dBA 15\text{ to }25\text{ dBA} 15 to 25 dBA ABOVE ambient noise , not an absolute value of 15 − 25 dBA 15 - 25\text{ dBA} 15 − 25 dBA . If background factory floor noise is 82 dBA 82\text{ dBA} 82 dBA , the alarm must be designed between 82 + 15 = 97 dBA 82 + 15 = 97\text{ dBA} 82 + 15 = 97 dBA and 82 + 25 = 107 dBA 82 + 25 = 107\text{ dBA} 82 + 25 = 107 dBA .