Study guide

12.3 Deterministic Inventory Models: EOQ, EPQ, and Safety Stock

FE Industrial and Systems Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Overview, CBT Strategy & Handbook Navigation

1.1 FE Industrial Exam Structure, CBT Logistics, and Pacing 1.2 Using the NCEES FE Reference Handbook and Approved Calculators

2 Chapter 2: Mathematics for Industrial Engineers

2.1 Analytic Geometry, Coordinate Systems, and Trigonometry 2.2 Calculus: Differential, Integral, and Series Approximations 2.3 Linear Algebra: Matrix Operations, Systems of Equations, and Vectors

3 Chapter 3: Engineering Sciences Core

3.1 Thermodynamics Fundamentals and Fluid Flow Principles 3.2 Statics, Dynamics, and Mechanics of Materials Core 3.3 Electrical Circuits, DC/AC Analysis, and Power in Industrial Systems

4 Chapter 4: Ethics and Professional Practice

4.1 NCEES Model Rules of Professional Conduct and Technical Society Ethics 4.2 Engineering Licensure, Public Welfare, and Professional Liability 4.3 Engineering Contracts, Intellectual Property, and Conflicts of Interest

5 Chapter 5: Engineering Economics

5.1 Time Value of Money, Discount Factors, and Equivalence 5.2 Evaluating Alternatives: Present Worth, Equivalent Annual Cost, and IRR 5.3 Incremental Rate of Return, Replacement Analysis, and Break-Even 5.4 Depreciation Methods, MACRS, Income Taxes, and Inflation

6 Chapter 6: Probability Foundations & Distributions

6.1 Basic Probability Concepts, Conditional Probability, and Bayes' Theorem 6.2 Discrete Probability Distributions 6.3 Continuous Probability Distributions

7 Chapter 7: Statistical Inference, Regression & Design of Experiments

7.1 Sampling Distributions, Central Limit Theorem, and Confidence Intervals 7.2 Hypothesis Testing: Means, Proportions, and Variances 7.3 Linear Regression, Correlation Analysis, and Design of Experiments (ANOVA)

8 Chapter 8: Data, Logic, Modeling & Linear Programming

8.1 Optimization Modeling: Decision Variables, Objectives, and Constraints 8.2 Linear Programming: Graphical Solutions and Simplex Fundamentals 8.3 Duality, Sensitivity Analysis, and Integer Linear Programming 8.4 Data, Logic Development, and Analytics

9 Chapter 9: Stochastic Models & Simulation

9.1 Queuing Theory: Little's Law, M/M/1, and Multi-Server Systems 9.2 Discrete-Time Markov Chains: Transition Matrices and Steady-State Probabilities 9.3 Discrete-Event Simulation Principles and Monte Carlo Modeling

10 Chapter 10: Engineering Management, Project Planning & Performance Measurement

10.1 Organizational Structure, Leadership, and Worker Motivation Theories 10.2 Project Management: WBS, Critical Path Method (CPM), PERT, and Crashing 10.3 Earned Value Management (EVM), Decision Trees, and Risk Preference 10.4 Performance Measurement: Productivity, KPIs, Wage Systems, and the Balanced Scorecard

11 Chapter 11: Manufacturing & Production Systems

11.1 Manufacturing Processes, Material Processing, and Tolerancing 11.2 Assembly Line Balancing, Takt Time, Cycle Time, and Throughput 11.3 Sustainable Manufacturing, Waste Minimization, and Life-Cycle Assessment

12 Chapter 12: Production Planning, Inventory Control & Sequencing

12.1 Demand Forecasting Methods and Forecast Error Tracking 12.2 Aggregate Planning, Master Production Scheduling (MPS), and MRP 12.3 Deterministic Inventory Models: EOQ, EPQ, and Safety Stock 12.4 Job Sequencing, Dispatching Rules, and Flow Shop Scheduling

13 Chapter 13: Lean Systems & Theory of Constraints

13.1 Lean Foundations: Value Stream Mapping, Seven Wastes, and 5S 13.2 Pull Systems, Kanban, Just-In-Time (JIT), and SMED Setup Reduction 13.3 Theory of Constraints: Bottleneck Identification and Drum-Buffer-Rope

14 Chapter 14: Facilities Planning & Material Handling

14.1 Facility Location Analysis: Qualitative Factor Rating and Centroid Method 14.2 Facility Layout Design and Flow Analysis 14.3 Material Handling Equipment, Warehousing, and AS/RS

15 Chapter 15: Supply Chain Design & Logistics

15.1 Supply Chain Network Architecture and Transportation Modes 15.2 Distribution Strategies, Cross-Docking, and Vehicle Routing 15.3 The Bullwhip Effect, Risk Pooling, and Supply Chain Coordination

16 Chapter 16: Human Factors & Cognitive Ergonomics

16.1 Cognitive Engineering, Human-Machine Interface, Displays, and Controls 16.2 Anthropometric Principles, Percentile Design, and Biomechanical Posture 16.3 Environmental Ergonomics: Industrial Noise, Lighting, and Heat Stress

17 Chapter 17: Physical Ergonomics & Workplace Safety

17.1 Physical Ergonomics: The NIOSH Manual Lifting Equation 17.2 Cumulative Trauma Disorders and Postural Assessment 17.3 Workplace Safety: OSHA Standards, Hazard Analysis, and Control Hierarchy

18 Chapter 18: Work Design & Measurement

18.1 Methods Engineering, Process Charting, and Principles of Motion Economy 18.2 Direct Stopwatch Time Study: Observed Time, Performance Rating, and Allowances 18.3 Predetermined Time Systems, Work Sampling, and Learning Curves

19 Chapter 19: Quality Management, Six Sigma & Analytical Tools

19.1 Quality Philosophies, Total Quality Management, and Cost of Quality 19.2 Six Sigma DMAIC Methodology and Quality Function Deployment 19.3 The Seven Basic Quality Tools, Root Cause Analysis, and Taguchi Loss Function

20 Chapter 20: Statistical Process Control

20.1 Statistical Process Control Principles, Variation, and Run Rules 20.2 Variable Control Charts: X-bar & R, X-bar & S, and Individual-Moving Range 20.3 Attribute Control Charts: Defectives (p, np) and Defects (c, u)

21 Chapter 21: Process Capability & Acceptance Sampling

21.1 Process Capability Indices and Defect Levels 21.2 Acceptance Sampling Concepts and Operating Characteristic Curves 21.3 Sampling Risks, AQL, LTPD, and Standard Sampling Plans

22 Chapter 22: Systems Engineering & Life-Cycle Management

22.1 The Systems Engineering V-Model, Stakeholder Requirements, and Functional Architecture 22.2 Configuration Management, Interface Control, and Verification & Validation 22.3 Life-Cycle Costing, Maintainability, and System Availability

23 Chapter 23: Reliability Engineering & Risk Analysis

23.1 Reliability Mathematics, Hazard Rates, and the Bathtub Curve 23.2 System Reliability Configurations: Series, Parallel, and k-out-of-n Systems 23.3 Failure Modes and Effects Analysis and Fault Tree Analysis

12.3 Deterministic Inventory Models: EOQ, EPQ, and Safety Stock

Key Takeaways Explain This Topic AI

The classic Economic Order Quantity (EOQ) minimizes total annual inventory cost by balancing ordering costs against holding costs, occurring precisely where annual ordering cost equals annual holding cost: Q* = √(2DS/H).

The Economic Production Quantity (EPQ) accounts for simultaneous production and consumption at rate p > d, yielding a larger batch size Q _p = √(2DS / [H(1 - d/p)]) while accumulating a smaller maximum inventory I_max = Q (1 - d/p).

Quantity discount evaluations require testing the feasibility of Q* at the lowest price tier; if infeasible, total annual cost (including unit purchase cost D*C) must be calculated at price break thresholds.

Under demand uncertainty during lead time, Safety Stock is determined by SS = Z * σ_L = Z * σ_d * √L, and the Reorder Point is ROP = d_avg * L + SS.

The single-period Newsvendor model optimizes stocking quantities for perishable or seasonal inventory by balancing the cost of underage C_u against overage C_o at the critical fractile P(D <= Q*) = C_u / (C_u + C_o).

Last updated: September 2026

Inventory represents one of the largest capital commitments on an industrial firm's balance sheet. Holding inventory serves vital operational functions: decoupling independent stages of production, hedging against price volatility and raw material inflation, buffering against demand spikes, and capturing supplier economies of scale. However, excessive inventory ties up working capital, inflates warehousing costs, and risks spoilage and obsolescence. Industrial engineers formulate mathematical inventory models to determine precisely when to order and how much to order .

1. Inventory Cost Taxonomy

Total inventory cost models optimize across four primary cost categories:

Holding / Carrying Cost ( H H H ) : The total annual cost incurred to maintain one unit in inventory for a full year. Expressed either as a direct dollar amount per unit-year ( H H H ) or as a percentage ( i i i ) of the unit purchase price ( C C C ): H = i ⋅ C H = i \cdot C H = i ⋅ C Components include:

Opportunity Cost of Capital : The foregone interest or corporate hurdle rate (MARR) on tied-up cash (typically 10%–20%).

Storage & Facility Costs : Warehouse rent, utilities, automated storage/retrieval system (ASRS) operation.

Handling & Labor : Forklift operations, cycle counting, security.

Taxes & Insurance : Ad valorem property taxes on stock, fire/theft insurance.

Depreciation, Shrinkage & Obsolescence : Pilferage, shelf-life expiration, engineering obsolescence.

Ordering / Setup Cost ( S S S ) : Fixed cost incurred every time an order is placed or a machine setup is performed, regardless of order size Q Q Q :

Procurement : Purchase requisition preparation, vendor EDI transmission, expediting, inbound delivery inspection, dock invoice processing.

Manufacturing : Machine tool tear-down, recalibration, line changeover, trial run quality scrap.

Unit Purchase / Item Cost ( C C C ) : The purchase price paid to an external vendor or the direct material and labor cost to manufacture one unit.

Shortage / Stockout Cost ( C s C_s C s ​ ) : Penalties incurred when customer demand exceeds available inventory: emergency expedited freight, backorder tracking administration, contract non-performance liquidated damages, and customer loss of goodwill.

2. The Classic Economic Order Quantity (EOQ) Model

The Economic Order Quantity (EOQ) , originally developed by Ford W. Harris, determines the order quantity that minimizes the sum of annual setup costs and annual inventory holding costs under deterministic conditions. EOQ Sawtooth Inventory Profile

  • Inventory
  • ▲
  • Q │ /| /| /|
  • │ / | / | / |
  • │ / | / | / | Average Inventory = Q / 2
  • Q/2 ┼─/───┼───/───┼───/───┼─
  • │/ | / | / |
  • 0 └─────┴──┴────┴──┴────┴───► Time
  • ◄──T*──►
  • Core Assumptions of Classic EOQ

Annual demand D D D is continuous, known, and occurs at a constant deterministic rate.

Replenishment is instantaneous (lead time is known and constant, and the entire batch Q Q Q arrives all at once; replenishment rate → ∞ \to \infty → ∞ ).

Shortages and backorders are strictly prohibited.

Unit purchase price C C C is constant across all order volumes (no quantity discounts initially).

Order cost S S S and unit annual holding cost H H H are fixed and known.

  • Mathematical Formulation
  • Number of orders placed per year : N = D Q N = \frac{D}{Q} N = Q D ​
  • Annual Ordering Cost : AOC = D Q S \text{AOC} = \frac{D}{Q} S AOC = Q D ​ S
  • Average Inventory Level : I ˉ = Q 2 \bar{I} = \frac{Q}{2} I ˉ = 2 Q ​
  • Annual Holding Cost : AHC = Q 2 H \text{AHC} = \frac{Q}{2} H AHC = 2 Q ​ H

Total Annual Inventory Cost (TC) : TC ( Q ) = D Q S + Q 2 H + D C \text{TC}(Q) = \frac{D}{Q} S + \frac{Q}{2} H + D C TC ( Q ) = Q D ​ S + 2 Q ​ H + D C

Because annual purchase cost D C D C D C is constant with respect to Q Q Q , minimizing total cost requires taking the first derivative of total variable cost with respect to Q Q Q and setting it to zero: d TC d Q = − D S Q 2 + H 2 = 0 ⟹ D S Q 2 = H 2 \frac{d\text{TC}}{dQ} = -\frac{D S}{Q^2} + \frac{H}{2} = 0 \implies \frac{D S}{Q^2} = \frac{H}{2} d Q d TC ​ = − Q 2 D S ​ + 2 H ​ = 0 ⟹ Q 2 D S ​ = 2 H ​

Fundamental EOQ Insight : At the optimal order quantity Q ∗ Q^* Q ∗ , Annual Ordering Cost exactly equals Annual Holding Cost : D Q ∗ S = Q ∗ 2 H \frac{D}{Q^*} S = \frac{Q^*}{2} H Q ∗ D ​ S = 2 Q ∗ ​ H

Solving for Q ∗ Q^* Q ∗ yields the celebrated EOQ formula : Q ∗ = 2 D S H Q^* = \sqrt{\frac{2 D S}{H}} Q ∗ = H 2 D S ​ ​

Additional EOQ Operating Metrics

Total Annual Variable Cost at Q ∗ Q^* Q ∗ (TVC) : TVC ( Q ∗ ) = 2 D S H \text{TVC}(Q^*) = \sqrt{2 D S H} TVC ( Q ∗ ) = 2 D S H ​

Optimal Cycle Time (Time Between Orders, T ∗ T^* T ∗ ) : T ∗ = Q ∗ D ( years ) = Q ∗ D × ( operating days/year ) T^* = \frac{Q^*}{D} \quad (\text{years}) = \frac{Q^*}{D} \times (\text{operating days/year}) T ∗ = D Q ∗ ​ ( years ) = D Q ∗ ​ × ( operating days/year )

Reorder Point (ROP) : Under deterministic lead time L L L and daily demand d = D / days d = D / \text{days} d = D / days : ROP = d ⋅ L \text{ROP} = d \cdot L ROP = d ⋅ L (If lead time L L L exceeds cycle time T ∗ T^* T ∗ , order cycles overlap, and ROP = d ⋅ [ L ( m o d T ∗ ) ] \text{ROP} = d \cdot [L \pmod{T^*}] ROP = d ⋅ [ L ( mod T ∗ )] ) .

3. Economic Production Quantity (EPQ / POQ)

In manufacturing environments, replenishment is rarely instantaneous. A machine cell produces parts at a finite production rate p p p while downstream assembly simultaneously consumes them at demand rate d d d ( p > d p > d p > d ). This is known as the Economic Production Quantity (EPQ) or Production Order Quantity (POQ) . EPQ Inventory Build-up and Depletion Profile

  • Inventory
  • ▲
  • Imax│ /\ /\
  • │ / \ / \
  • │ / \ / \ Rate of build = (p - d)
  • │ / \ / \ Rate of depletion = d
  • 0 └────┴────────┴────┴────────┴───► Time
  • ◄─tp─►◄──td──►
  • ◄─────T──────►
  • Dynamics of the Production Run

Production Phase ( t p t_p t p ​ ) : The machine operates for duration t p = Q / p t_p = Q / p t p ​ = Q / p . Parts are manufactured at rate p p p and simultaneously consumed at rate d d d . Net inventory accumulates at the rate ( p − d ) (p - d) ( p − d ) .

Maximum Inventory Level ( I max ⁡ I_{\max} I m a x ​ ) : Occurs precisely when the production run terminates at t p t_p t p ​ : I max ⁡ = t p ( p − d ) = Q p ( p − d ) = Q ( 1 − d p ) I_{\max} = t_p (p - d) = \frac{Q}{p}(p - d) = Q \left(1 - \frac{d}{p}\right) I m a x ​ = t p ​ ( p − d ) = p Q ​ ( p − d ) = Q ( 1 − p d ​ )

Depletion Phase ( t d t_d t d ​ ) : Production halts ( p = 0 p = 0 p = 0 ). Demand consumes remaining inventory at rate d d d over time t d = I max ⁡ / d t_d = I_{\max} / d t d ​ = I m a x ​ / d until stock reaches zero.

Total Cycle Length ( T T T ) : T = t p + t d = Q d T = t_p + t_d = \frac{Q}{d} T = t p ​ + t d ​ = d Q ​ .

EPQ Mathematical Formulation

Average Inventory Level : I ˉ = I max ⁡ 2 = Q 2 ( 1 − d p ) \bar{I} = \frac{I_{\max}}{2} = \frac{Q}{2}\left(1 - \frac{d}{p}\right) I ˉ = 2 I m a x ​ ​ = 2 Q ​ ( 1 − p d ​ )

Total Annual Cost : TC p ( Q ) = D Q S + Q 2 H ( 1 − d p ) + D C \text{TC}_p(Q) = \frac{D}{Q} S + \frac{Q}{2} H \left(1 - \frac{d}{p}\right) + D C TC p ​ ( Q ) = Q D ​ S + 2 Q ​ H ( 1 − p d ​ ) + D C

Setting d TC p d Q = 0 \frac{d\text{TC}_p}{dQ} = 0 d Q d TC p ​ ​ = 0 yields the optimal production lot size ( Q p ∗ Q_p^* Q p ∗ ​ ) : Q p ∗ = 2 D S H ( 1 − d p ) = Q ∗ p p − d Q_p^* = \sqrt{\frac{2 D S}{H \left(1 - \frac{d}{p}\right)}} = Q^* \sqrt{\frac{p}{p - d}} Q p ∗ ​ = H ( 1 − p d ​ ) 2 D S ​ ​ = Q ∗ p − d p ​ ​

Key Relationships Between EPQ and EOQ

Because ( 1 − d / p ) < 1 (1 - d/p) < 1 ( 1 − d / p ) < 1 , the denominator shrinks, which means Q p ∗ > Q ∗ Q_p^* > Q^* Q p ∗ ​ > Q ∗ (optimal production lot size is always larger than classic purchase EOQ).

However, because inventory is consumed during production, the maximum accumulated inventory is substantially less than the batch size: I max ⁡ = Q p ∗ ( 1 − d / p ) < Q p ∗ I_{\max} = Q_p^*(1 - d/p) < Q_p^* I m a x ​ = Q p ∗ ​ ( 1 − d / p ) < Q p ∗ ​ .

As production rate becomes extremely fast ( p → ∞ p \to \infty p → ∞ ), d / p → 0 d/p \to 0 d / p → 0 , and EPQ converges mathematically to classic EOQ.

4. Quantity Discount Models (All-Units Discounts)

Suppliers frequently offer price discounts to incentivize large order volumes. In an all-units quantity discount , the discounted unit price C j C_j C j ​ applies to every single unit purchased in the order, provided the order quantity meets or exceeds the minimum threshold q j q_j q j ​ .

Price Schedule Structure Unit Price C = { C 1 , for 0 ≤ Q < q 1 C 2 , for q 1 ≤ Q < q 2 C 3 , for Q ≥ q 2 \text{Unit Price } C =

  • \begin{cases}
  • C_1, & \text{for } 0 \le Q < q_1 \\
  • C_2, & \text{for } q_1 \le Q < q_2 \\
  • C_3, & \text{for } Q \ge q_2

\end{cases} Unit Price C = ⎩ ⎨ ⎧ ​ C 1 ​ , C 2 ​ , C 3 ​ , ​ for 0 ≤ Q < q 1 ​ for q 1 ​ ≤ Q < q 2 ​ for Q ≥ q 2 ​ ​

  • where C 1 > C 2 > C 3 C_1 > C_2 > C_3 C 1 ​ > C 2 ​ > C 3 ​ . Quantity Discount Total Cost Curves
  • Annual Cost
  • ▲
  • │ / TC(C1) [No discount]
  • │ / / TC(C2) [Discount 1]
  • │ / / / TC(C3) [Discount 2]
  • │ / / /
  • │ ─── ─── ● ◄── Breakpoint q2 (Often Global Optimum!)
  • │ ● ◄─────── Breakpoint q1
  • │
  • 0 └─────────────────────────► Order Quantity (Q)
  • Step-by-Step Optimization Algorithm

Calculate Q ∗ Q^* Q ∗ for the Lowest Price Tier : Start with the largest discount (lowest unit cost C k C_k C k ​ , setting H k = i ⋅ C k H_k = i \cdot C_k H k ​ = i ⋅ C k ​ ): Q k ∗ = 2 D S H k Q_k^* = \sqrt{\frac{2 D S}{H_k}} Q k ∗ ​ = H k ​ 2 D S ​ ​

Check Feasibility :

If Q k ∗ Q_k^* Q k ∗ ​ is feasible ( Q k ∗ ≥ q k − 1 Q_k^* \ge q_{k-1} Q k ∗ ​ ≥ q k − 1 ​ ), then Q k ∗ Q_k^* Q k ∗ ​ is the absolute global optimum. Stop.

If Q k ∗ Q_k^* Q k ∗ ​ is infeasible ( Q k ∗ < q k − 1 Q_k^* < q_{k-1} Q k ∗ ​ < q k − 1 ​ ), compute total annual cost TC \text{TC} TC at the minimum price break threshold q k − 1 q_{k-1} q k − 1 ​ : TC ( q k − 1 ) = D q k − 1 S + q k − 1 2 H k + D C k \text{TC}(q_{k-1}) = \frac{D}{q_{k-1}} S + \frac{q_{k-1}}{2} H_k + D C_k TC ( q k − 1 ​ ) = q k − 1 ​ D ​ S + 2 q k − 1 ​ ​ H k ​ + D C k ​

Evaluate Higher Price Tiers : Move to the next lower discount tier (unit cost C k − 1 C_{k-1} C k − 1 ​ ). Calculate Q k − 1 ∗ Q_{k-1}^* Q k − 1 ∗ ​ . If feasible, compute its total cost TC ( Q k − 1 ∗ ) \text{TC}(Q_{k-1}^*) TC ( Q k − 1 ∗ ​ ) . If infeasible, evaluate at its price break threshold.

Select Lowest Total Cost : Compare the total costs calculated across all candidate points (feasible EOQs and candidate price breakpoints). Select the quantity that yields the lowest Total Annual Cost (including purchase cost D C D C D C ) .

Exam Trap Alert : In quantity discount problems, you MUST include unit purchase cost D C D C D C in the total cost comparison! In basic EOQ, D C D C D C is constant and can be ignored; in discount problems, D C D C D C changes across tiers and represents the single largest cost difference.

5. Stochastic Inventory Control and Safety Stock

When customer demand or supplier lead times fluctuate unpredictably, carrying only deterministic inventory leads to frequent stockouts. Industrial engineers implement Safety Stock ( S S SS SS ) as a buffer against demand surges and delivery delays during the replenishment lead time.

Lead Time Demand Distribution

Under standard stochastic assumptions, daily demand is a normally distributed random variable with mean d ˉ \bar{d} d ˉ and standard deviation σ d \sigma_d σ d ​ . If lead time L L L is constant across cycles, total demand during lead time ( D L D_L D L ​ ) is normally distributed: D L ∼ N ( d ˉ ⋅ L , σ L 2 ) D_L \sim \mathcal{N}\left(\bar{d} \cdot L, \; \sigma_L^2\right) D L ​ ∼ N ( d ˉ ⋅ L , σ L 2 ​ )

By the sum of independent random variables, the standard deviation of lead time demand is governed by the Square Root of Lead Time Law : σ L = ∑ i = 1 L σ d 2 = L ⋅ σ d 2 = σ d L \sigma_L = \sqrt{\sum_{i=1}^L \sigma_d^2} = \sqrt{L \cdot \sigma_d^2} = \sigma_d \sqrt{L} σ L ​ = i = 1 ∑ L ​ σ d 2 ​ ​ = L ⋅ σ d 2 ​ ​ = σ d ​ L ​

Safety Stock Formulation

To achieve a desired Cycle Service Level (CSL) —defined as the probability of not stocking out during a replenishment cycle ( P ( D L ≤ ROP ) = 1 − α P(D_L \le \text{ROP}) = 1 - \alpha P ( D L ​ ≤ ROP ) = 1 − α ): SS = Z ⋅ σ L = Z ⋅ σ d L \text{SS} = Z \cdot \sigma_L = Z \cdot \sigma_d \sqrt{L} SS = Z ⋅ σ L ​ = Z ⋅ σ d ​ L ​

where Z Z Z is the standard normal critical value satisfying Φ ( Z ) = CSL \Phi(Z) = \text{CSL} Φ ( Z ) = CSL .

  • Cycle Service Level (CSL) Risk of Stockout ( α \alpha α ) Normal Factor ( Z Z Z )
  • 90.0% 10.0% 1.282
  • 95.0% 5.0% 1.645
  • 97.5% 2.5% 1.960
  • 98.0% 2.0% 2.054
  • 99.0% 1.0% 2.326
  • 99.9% 0.1% 3.090
  • Stochastic Reorder Point (ROP)

The reorder point under uncertain demand incorporates both expected lead time demand and safety stock: ROP = d ˉ ⋅ L + SS = d ˉ ⋅ L + Z ⋅ σ d L \text{ROP} = \bar{d} \cdot L + \text{SS} = \bar{d} \cdot L + Z \cdot \sigma_d \sqrt{L} ROP = d ˉ ⋅ L + SS = d ˉ ⋅ L + Z ⋅ σ d ​ L ​

Lead Time Uncertainty Cases

Variable Lead Time, Constant Demand ( d d d ) : σ L = d ⋅ σ LT ⟹ SS = Z ⋅ d ⋅ σ LT \sigma_L = d \cdot \sigma_{\text{LT}} \implies \text{SS} = Z \cdot d \cdot \sigma_{\text{LT}} σ L ​ = d ⋅ σ LT ​ ⟹ SS = Z ⋅ d ⋅ σ LT ​

Both Demand and Lead Time Variable (Independent) : σ D L = L ˉ σ d 2 + d ˉ 2 σ LT 2 ⟹ SS = Z L ˉ σ d 2 + d ˉ 2 σ LT 2 \sigma_{DL} = \sqrt{\bar{L} \sigma_d^2 + \bar{d}^2 \sigma_{\text{LT}}^2} \implies \text{SS} = Z \sqrt{\bar{L} \sigma_d^2 + \bar{d}^2 \sigma_{\text{LT}}^2} σ D L ​ = L ˉ σ d 2 ​ + d ˉ 2 σ LT 2 ​ ​ ⟹ SS = Z L ˉ σ d 2 ​ + d ˉ 2 σ LT 2 ​ ​

6. The Single-Period Inventory Model (Newsvendor Model)

The classic EOQ model assumes inventory unsold in one period carries over seamlessly to the next. For perishable goods , seasonal merchandise, high-fashion apparel, or single-day events, unsold items cannot be held over and must be salvaged or disposed of at a steep loss. This is governed by the Newsvendor Model .

Cost Drivers

Cost of Underage ( C u C_u C u ​ ) : The marginal profit foregone per unit of unmet demand (under-stocking penalty): C u = P − C + g C_u = P - C + g C u ​ = P − C + g where P P P is retail selling price, C C C is acquisition cost, and g g g is customer goodwill loss.

Cost of Overage ( C o C_o C o ​ ) : The loss incurred on each unsold unit remaining at the end of the period (over-stocking penalty): C o = C − V + s C_o = C - V + s C o ​ = C − V + s where V V V is salvage/liquidation value recovered, and s s s is disposal cost.

The Critical Fractile

To maximize expected profit, the optimal order quantity Q ∗ Q^* Q ∗ occurs where the probability of satisfying all demand equals the critical fractile ( C F CF CF ) : P ( D ≤ Q ∗ ) = C u C u + C o P(D \le Q^*) = \frac{C_u}{C_u + C_o} P ( D ≤ Q ∗ ) = C u ​ + C o ​ C u ​ ​ Critical Fractile Distribution

  • Probability
  • ▲
  • │ Optimal Q*
  • │ /│
  • │ _.-' │ `-._
  • │ .' │ `. Area to left = P(D <= Q*) = Cu / (Cu + Co)

│ .' │ `.

  • 0 └──┴─────────┴─────────┴──► Demand (D)
  • ▲
  • Q*
  • Determining Optimal Order Quantity Q ∗ Q^* Q ∗

For Continuous Normally Distributed Demand ( D ∼ N ( μ , σ ) D \sim \mathcal{N}(\mu, \sigma) D ∼ N ( μ , σ ) ) :

Find Z ∗ Z^* Z ∗ from the standard normal cumulative distribution table such that Φ ( Z ∗ ) = C u C u + C o \Phi(Z^*) = \frac{C_u}{C_u + C_o} Φ ( Z ∗ ) = C u ​ + C o ​ C u ​ ​ , then: Q ∗ = μ + Z ∗ ⋅ σ Q^* = \mu + Z^* \cdot \sigma Q ∗ = μ + Z ∗ ⋅ σ

For Discrete Empirical Demand : Accumulate cumulative probabilities P ( D ≤ Q ) P(D \le Q) P ( D ≤ Q ) . Select the smallest order quantity Q ∗ Q^* Q ∗ satisfying: P ( D ≤ Q ∗ ) ≥ C u C u + C o P(D \le Q^*) \ge \frac{C_u}{C_u + C_o} P ( D ≤ Q ∗ ) ≥ C u ​ + C o ​ C u ​ ​

  • 7. Step-by-Step Worked Engineering Calculations
  • Worked Example 12.3.1: EOQ and Quantity Discount Trade-Off

Problem : An industrial valve distributor consumes 10,000 replacement seals annually. Ordering cost is $50 per order, and the annual inventory carrying rate is i = 20 % i = 20\% i = 20% . The manufacturer quotes the following all-units discount schedule:

  • Tier 1 (1 to 499 units) : C 1 = $ 20.00 C_1 = \text{\textdollar}20.00 C 1 ​ = $ 20.00 per unit
  • Tier 2 (500 to 999 units) : C 2 = $ 19.00 C_2 = \text{\textdollar}19.00 C 2 ​ = $ 19.00 per unit
  • Tier 3 (1,000+ units) : C 3 = $ 18.20 C_3 = \text{\textdollar}18.20 C 3 ​ = $ 18.20 per unit

Determine the optimal order quantity Q ∗ Q^* Q ∗ that minimizes total annual inventory cost.

Solution :

Step 1: Evaluate Tier 3 (Lowest Price: C 3 = $ 18.20 C_3 = \text{\textdollar}18.20 C 3 ​ = $ 18.20 , q 2 = 1 , 000 q_2 = 1,000 q 2 ​ = 1 , 000 )

Holding cost: H 3 = i ⋅ C 3 = 0.20 × 18.20 = $ 3.64 /unit-year H_3 = i \cdot C_3 = 0.20 \times 18.20 = \text{\textdollar}3.64\text{/unit-year} H 3 ​ = i ⋅ C 3 ​ = 0.20 × 18.20 = $ 3.64 /unit-year .

Compute candidate EOQ: Q 3 ∗ = 2 D S H 3 = 2 × 10 , 000 × 50 3.64 = 1 , 000 , 000 3.64 = 274 , 725.27 ≈ 524.1 units Q_3^* = \sqrt{\frac{2 D S}{H_3}} = \sqrt{\frac{2 \times 10,000 \times 50}{3.64}} = \sqrt{\frac{1,000,000}{3.64}} = \sqrt{274,725.27} \approx 524.1\text{ units} Q 3 ∗ ​ = H 3 ​ 2 D S ​ ​ = 3.64 2 × 10 , 000 × 50 ​ ​ = 3.64 1 , 000 , 000 ​ ​ = 274 , 725.27 ​ ≈ 524.1 units

Feasibility Check : 524.1 < 1 , 000 524.1 < 1,000 524.1 < 1 , 000 . Thus, Q 3 ∗ Q_3^* Q 3 ∗ ​ is infeasible in Tier 3.

Compute Total Cost at Tier 3 price breakpoint ( Q = 1 , 000 Q = 1,000 Q = 1 , 000 units): TC ( 1 , 000 ) = D Q S + Q 2 H 3 + D C 3 \text{TC}(1,000) = \frac{D}{Q} S + \frac{Q}{2} H_3 + D C_3 TC ( 1 , 000 ) = Q D ​ S + 2 Q ​ H 3 ​ + D C 3 ​ TC ( 1 , 000 ) = 10 , 000 1 , 000 ( 50 ) + 1 , 000 2 ( 3.64 ) + 10 , 000 ( 18.20 ) \text{TC}(1,000) = \frac{10,000}{1,000}(50) + \frac{1,000}{2}(3.64) + 10,000(18.20) TC ( 1 , 000 ) = 1 , 000 10 , 000 ​ ( 50 ) + 2 1 , 000 ​ ( 3.64 ) + 10 , 000 ( 18.20 ) TC ( 1 , 000 ) = 500 + 1 , 820 + 182 , 000 = $ 184 , 320.00 \text{TC}(1,000) = 500 + 1,820 + 182,000 = \$184,320.00 TC ( 1 , 000 ) = 500 + 1 , 820 + 182 , 000 = $184 , 320.00

Step 2: Evaluate Tier 2 ( C 2 = $ 19.00 C_2 = \text{\textdollar}19.00 C 2 ​ = $ 19.00 , 500 ≤ Q < 1 , 000 500 \le Q < 1,000 500 ≤ Q < 1 , 000 )

Holding cost: H 2 = i ⋅ C 2 = 0.20 × 19.00 = $ 3.80 /unit-year H_2 = i \cdot C_2 = 0.20 \times 19.00 = \text{\textdollar}3.80\text{/unit-year} H 2 ​ = i ⋅ C 2 ​ = 0.20 × 19.00 = $ 3.80 /unit-year .

Compute candidate EOQ: Q 2 ∗ = 2 × 10 , 000 × 50 3.80 = 1 , 000 , 000 3.80 = 263 , 157.89 ≈ 513.0 units Q_2^* = \sqrt{\frac{2 \times 10,000 \times 50}{3.80}} = \sqrt{\frac{1,000,000}{3.80}} = \sqrt{263,157.89} \approx 513.0\text{ units} Q 2 ∗ ​ = 3.80 2 × 10 , 000 × 50 ​ ​ = 3.80 1 , 000 , 000 ​ ​ = 263 , 157.89 ​ ≈ 513.0 units

Feasibility Check : 500 ≤ 513.0 < 1 , 000 500 \le 513.0 < 1,000 500 ≤ 513.0 < 1 , 000 . Feasible!

Compute Total Cost at Q 2 ∗ = 513 Q_2^* = 513 Q 2 ∗ ​ = 513 units: TC ( 513 ) = 10 , 000 513 ( 50 ) + 513 2 ( 3.80 ) + 10 , 000 ( 19.00 ) \text{TC}(513) = \frac{10,000}{513}(50) + \frac{513}{2}(3.80) + 10,000(19.00) TC ( 513 ) = 513 10 , 000 ​ ( 50 ) + 2 513 ​ ( 3.80 ) + 10 , 000 ( 19.00 ) TC ( 513 ) = 974.66 + 974.70 + 190 , 000 = 1 , 949.36 + 190 , 000 = $ 191 , 949.36 \text{TC}(513) = 974.66 + 974.70 + 190,000 = 1,949.36 + 190,000 = \$191,949.36 TC ( 513 ) = 974.66 + 974.70 + 190 , 000 = 1 , 949.36 + 190 , 000 = $191 , 949.36

Step 3: Compare Total Annual Costs

TC ( 1 , 000 units ) = $ 184 , 320.00 \text{TC}(1,000 \text{ units}) = \text{\textdollar}184,320.00 TC ( 1 , 000 units ) = $ 184 , 320.00

TC ( 513 units ) = $ 191 , 949.36 \text{TC}(513 \text{ units}) = \text{\textdollar}191,949.36 TC ( 513 units ) = $ 191 , 949.36

Cost savings by ordering 1,000 units = $ 191 , 949.36 − $ 184 , 320.00 = $ 7 , 629.36 per year \text{\textdollar}191,949.36 - \text{\textdollar}184,320.00 = \text{\textdollar}7,629.36\text{ per year} $ 191 , 949.36 − $ 184 , 320.00 = $ 7 , 629.36 per year .

Engineering Decision : Order Q ∗ = 1 , 000 Q^* = 1,000 Q ∗ = 1 , 000 units at the Tier 3 price breakpoint.

Worked Example 12.3.2: Economic Production Quantity (EPQ) Mechanics

Problem : A precision machine shop manufactures hydraulic couplings on a dedicated CNC lathe. Annual demand is D = 18 , 000 D = 18,000 D = 18 , 000 units. The facility operates 250 days per year, giving a daily demand of d = 18 , 000 / 250 = 72 d = 18,000 / 250 = 72 d = 18 , 000/250 = 72 units/day. When operating, the lathe produces couplings at a rate of p = 300 p = 300 p = 300 units/day. Setup cost per production run is S = $ 300 S = \text{\textdollar}300 S = $ 300 , and unit annual holding cost is H = $ 4.00 H = \text{\textdollar}4.00 H = $ 4.00 per unit-year.

Calculate the optimal production lot size ( Q p ∗ Q_p^* Q p ∗ ​ ).

Determine the maximum inventory level accumulated ( I max ⁡ I_{\max} I m a x ​ ).

Calculate the length of the production run ( t p t_p t p ​ ) and the overall cycle length ( T T T ) in operating days.

Compute the total annual setup and holding costs.

Solution :

Step 1: Calculate Q p ∗ Q_p^* Q p ∗ ​

Consumption ratio: d / p = 72 / 300 = 0.24 d/p = 72 / 300 = 0.24 d / p = 72/300 = 0.24 .

Production reduction factor: 1 − d / p = 1 − 0.24 = 0.76 1 - d/p = 1 - 0.24 = 0.76 1 − d / p = 1 − 0.24 = 0.76 .

Apply the EPQ formula: Q p ∗ = 2 D S H ( 1 − d p ) = 2 × 18 , 000 × 300 4.00 × 0.76 = 10 , 800 , 000 3.04 = 3 , 552 , 631.58 ≈ 1 , 884.8 units Q_p^* = \sqrt{\frac{2 D S}{H \left(1 - \frac{d}{p}\right)}} = \sqrt{\frac{2 \times 18,000 \times 300}{4.00 \times 0.76}} = \sqrt{\frac{10,800,000}{3.04}} = \sqrt{3,552,631.58} \approx 1,884.8\text{ units} Q p ∗ ​ = H ( 1 − p d ​ ) 2 D S ​ ​ = 4.00 × 0.76 2 × 18 , 000 × 300 ​ ​ = 3.04 10 , 800 , 000 ​ ​ = 3 , 552 , 631.58 ​ ≈ 1 , 884.8 units Round to 1,885 units .

Step 2: Determine Maximum Inventory Level ( I max ⁡ I_{\max} I m a x ​ ) I max ⁡ = Q p ∗ ( 1 − d p ) = 1 , 885 × 0.76 = 1 , 432.6 ≈ 1 , 433 units I_{\max} = Q_p^*\left(1 - \frac{d}{p}\right) = 1,885 \times 0.76 = 1,432.6 \approx 1,433\text{ units} I m a x ​ = Q p ∗ ​ ( 1 − p d ​ ) = 1 , 885 × 0.76 = 1 , 432.6 ≈ 1 , 433 units

Step 3: Determine Production Run Duration ( t p t_p t p ​ ) and Cycle Time ( T T T )

Production run duration: t p = Q p ∗ p = 1 , 885 300 = 6.28 operating days t_p = \frac{Q_p^*}{p} = \frac{1,885}{300} = 6.28\text{ operating days} t p ​ = p Q p ∗ ​ ​ = 300 1 , 885 ​ = 6.28 operating days .

Overall cycle time: T = Q p ∗ d = 1 , 885 72 = 26.18 operating days T = \frac{Q_p^*}{d} = \frac{1,885}{72} = 26.18\text{ operating days} T = d Q p ∗ ​ ​ = 72 1 , 885 ​ = 26.18 operating days .

Machine is producing for 6.28 days and idle (available for other jobs) for 26.18 − 6.28 = 19.90 26.18 - 6.28 = 19.90 26.18 − 6.28 = 19.90 days.

Step 4: Calculate Total Annual Variable Costs

Annual setup cost: D Q p ∗ S = 18 , 000 1 , 885 × 300 = 9.549 × 300 = $ 2 , 864.72 \frac{D}{Q_p^*} S = \frac{18,000}{1,885} \times 300 = 9.549 \times 300 = \text{\textdollar}2,864.72 Q p ∗ ​ D ​ S = 1 , 885 18 , 000 ​ × 300 = 9.549 × 300 = $ 2 , 864.72

Annual holding cost: I max ⁡ 2 H = 1 , 432.6 2 × 4.00 = 716.3 × 4.00 = $ 2 , 865.20 \frac{I_{\max}}{2} H = \frac{1,432.6}{2} \times 4.00 = 716.3 \times 4.00 = \text{\textdollar}2,865.20 2 I m a x ​ ​ H = 2 1 , 432.6 ​ × 4.00 = 716.3 × 4.00 = $ 2 , 865.20

Total Annual Variable Cost : $ 2 , 864.72 + $ 2 , 865.20 = $ 5 , 729.92 /year \text{\textdollar}2,864.72 + \text{\textdollar}2,865.20 = \text{\textdollar}5,729.92\text{/year} $ 2 , 864.72 + $ 2 , 865.20 = $ 5 , 729.92 /year (balanced within rounding).

Worked Example 12.3.3: Safety Stock, Stochastic ROP, and Newsvendor Optimization

Problem (Part A - Stochastic ROP) : Daily demand for a critical replacement bearing is normally distributed with mean d ˉ = 50 \bar{d} = 50 d ˉ = 50 bearings/day and standard deviation σ d = 8 \sigma_d = 8 σ d ​ = 8 bearings/day. Supplier delivery lead time is constant at L = 9 L = 9 L = 9 days. Management mandates a 97.72% Cycle Service Level (corresponding to Z = 2.00 Z = 2.00 Z = 2.00 ). Calculate the required safety stock ( S S SS SS ) and the reorder point (ROP).

Problem (Part B - Single-Period Newsvendor) : A souvenir vendor purchases commemorative jackets for a regional collegiate championship track meet. Jackets are bought for $40 each and sold to spectators for $100 each. Any unsold jackets after the meet can be liquidated to an off-price distributor for $10 each. Historical attendance models project jacket demand as a normal distribution with mean μ = 500 \mu = 500 μ = 500 jackets and standard deviation σ = 60 \sigma = 60 σ = 60 jackets. What is the critical fractile, and how many jackets should the vendor order?

Solution :

Part A: Stochastic ROP and Safety Stock

Calculate standard deviation of demand during lead time using the Square Root Law: σ L = σ d L = 8 9 = 8 × 3 = 24 bearings \sigma_L = \sigma_d \sqrt{L} = 8 \sqrt{9} = 8 \times 3 = 24\text{ bearings} σ L ​ = σ d ​ L ​ = 8 9 ​ = 8 × 3 = 24 bearings

Sizing Safety Stock ( S S SS SS ): SS = Z ⋅ σ L = 2.00 × 24 = 48 bearings \text{SS} = Z \cdot \sigma_L = 2.00 \times 24 = 48\text{ bearings} SS = Z ⋅ σ L ​ = 2.00 × 24 = 48 bearings

Calculate Reorder Point (ROP): ROP = d ˉ ⋅ L + SS = ( 50 × 9 ) + 48 = 450 + 48 = 498 bearings \text{ROP} = \bar{d} \cdot L + \text{SS} = (50 \times 9) + 48 = 450 + 48 = 498\text{ bearings} ROP = d ˉ ⋅ L + SS = ( 50 × 9 ) + 48 = 450 + 48 = 498 bearings

Operational Rule : Place an order for replenishment whenever on-hand plus on-order inventory falls to 498 bearings .

Part B: Newsvendor Critical Fractile and Stocking Quantity

Identify cost parameters:

Retail price P = $ 100 P = \text{\textdollar}100 P = $ 100 , purchase cost C = $ 40 C = \text{\textdollar}40 C = $ 40 , salvage value V = $ 10 V = \text{\textdollar}10 V = $ 10 .

Cost of Underage: C u = P − C = 100 − 40 = $ 60 C_u = P - C = 100 - 40 = \text{\textdollar}60 C u ​ = P − C = 100 − 40 = $ 60 .

Cost of Overage: C o = C − V = 40 − 10 = $ 30 C_o = C - V = 40 - 10 = \text{\textdollar}30 C o ​ = C − V = 40 − 10 = $ 30 .

Calculate Critical Fractile ( C F CF CF ): C F = C u C u + C o = 60 60 + 30 = 60 90 = 2 3 ≈ 0.6667 CF = \frac{C_u}{C_u + C_o} = \frac{60}{60 + 30} = \frac{60}{90} = \frac{2}{3} \approx 0.6667 CF = C u ​ + C o ​ C u ​ ​ = 60 + 30 60 ​ = 90 60 ​ = 3 2 ​ ≈ 0.6667

Find the standard normal Z Z Z -value corresponding to Φ ( Z ) = 0.6667 \Phi(Z) = 0.6667 Φ ( Z ) = 0.6667 :

From the standard normal cumulative distribution table, Φ ( 0.43 ) ≈ 0.6664 \Phi(0.43) \approx 0.6664 Φ ( 0.43 ) ≈ 0.6664 and Φ ( 0.44 ) ≈ 0.6700 \Phi(0.44) \approx 0.6700 Φ ( 0.44 ) ≈ 0.6700 .

Interpolating gives Z ∗ ≈ 0.431 Z^* \approx 0.431 Z ∗ ≈ 0.431 .

Compute optimal stocking quantity Q ∗ Q^* Q ∗ : Q ∗ = μ + Z ∗ ⋅ σ = 500 + 0.431 ( 60 ) = 500 + 25.86 = 525.86 ≈ 526 jackets Q^* = \mu + Z^* \cdot \sigma = 500 + 0.431(60) = 500 + 25.86 = 525.86 \approx 526\text{ jackets} Q ∗ = μ + Z ∗ ⋅ σ = 500 + 0.431 ( 60 ) = 500 + 25.86 = 525.86 ≈ 526 jackets

Engineering Decision : The vendor should order 526 jackets .

8. NCEES Reference Handbook Tips & Realistic Exam Traps

Holding Cost Scaling Trap : When calculating H = i ⋅ C H = i \cdot C H = i ⋅ C , always verify that holding cost and ordering cost share the same time unit as demand (annual). If demand D D D is in units/year, H H H must be dollars/unit-year. Never mix monthly holding rates with annual demand.

Square Root Law of Lead Time : Safety stock scales with L \sqrt{L} L ​ , NOT L L L . If a supplier reduces lead time from 16 days to 4 days (a 75% reduction), safety stock is cut by 4 / 16 = 2 / 4 = 50 % \sqrt{4}/\sqrt{16} = 2/4 = 50\% 4 ​ / 16 ​ = 2/4 = 50% (a 50% reduction, not 75%).

Average Inventory in EPQ : In classic EOQ, average inventory is Q / 2 Q/2 Q /2 . In EPQ, average inventory is I max ⁡ 2 = Q 2 ( 1 − d / p ) \frac{I_{\max}}{2} = \frac{Q}{2}(1 - d/p) 2 I m a x ​ ​ = 2 Q ​ ( 1 − d / p ) . Do not use Q p ∗ / 2 Q_p^* / 2 Q p ∗ ​ /2 when calculating EPQ holding costs!

Quantity Discount Global Optimum : Never assume the feasible Q ∗ Q^* Q ∗ is automatically the cheapest option without comparing its total annual cost to the total annual cost at every lower price breakpoint. The huge savings on unit purchase cost ( D ⋅ C D \cdot C D ⋅ C ) almost always outweighs the modest increase in holding cost at price break points.

Newsvendor Critical Fractile Ratio : Do not invert the ratio! The critical fractile is C u C u + C o \frac{C_u}{C_u + C_o} C u ​ + C o ​ C u ​ ​ , NOT C o C u + C o \frac{C_o}{C_u + C_o} C u ​ + C o ​ C o ​ ​ . Underage cost (marginal profit) is in the numerator. If profit margin is high ( C u ≫ C o C_u \gg C_o C u ​ ≫ C o ​ ), C F > 0.50 CF > 0.50 CF > 0.50 and you stock more than the mean ( Q ∗ > μ Q^* > \mu Q ∗ > μ ).