Study guide
23.1 Reliability Mathematics, Hazard Rates, and the Bathtub Curve
FE Industrial and Systems Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Overview, CBT Strategy & Handbook Navigation
1.1 FE Industrial Exam Structure, CBT Logistics, and Pacing 1.2 Using the NCEES FE Reference Handbook and Approved Calculators
2 Chapter 2: Mathematics for Industrial Engineers
2.1 Analytic Geometry, Coordinate Systems, and Trigonometry 2.2 Calculus: Differential, Integral, and Series Approximations 2.3 Linear Algebra: Matrix Operations, Systems of Equations, and Vectors
3 Chapter 3: Engineering Sciences Core
3.1 Thermodynamics Fundamentals and Fluid Flow Principles 3.2 Statics, Dynamics, and Mechanics of Materials Core 3.3 Electrical Circuits, DC/AC Analysis, and Power in Industrial Systems
4 Chapter 4: Ethics and Professional Practice
4.1 NCEES Model Rules of Professional Conduct and Technical Society Ethics 4.2 Engineering Licensure, Public Welfare, and Professional Liability 4.3 Engineering Contracts, Intellectual Property, and Conflicts of Interest
5 Chapter 5: Engineering Economics
5.1 Time Value of Money, Discount Factors, and Equivalence 5.2 Evaluating Alternatives: Present Worth, Equivalent Annual Cost, and IRR 5.3 Incremental Rate of Return, Replacement Analysis, and Break-Even 5.4 Depreciation Methods, MACRS, Income Taxes, and Inflation
6 Chapter 6: Probability Foundations & Distributions
6.1 Basic Probability Concepts, Conditional Probability, and Bayes' Theorem 6.2 Discrete Probability Distributions 6.3 Continuous Probability Distributions
7 Chapter 7: Statistical Inference, Regression & Design of Experiments
7.1 Sampling Distributions, Central Limit Theorem, and Confidence Intervals 7.2 Hypothesis Testing: Means, Proportions, and Variances 7.3 Linear Regression, Correlation Analysis, and Design of Experiments (ANOVA)
8 Chapter 8: Data, Logic, Modeling & Linear Programming
8.1 Optimization Modeling: Decision Variables, Objectives, and Constraints 8.2 Linear Programming: Graphical Solutions and Simplex Fundamentals 8.3 Duality, Sensitivity Analysis, and Integer Linear Programming 8.4 Data, Logic Development, and Analytics
9 Chapter 9: Stochastic Models & Simulation
9.1 Queuing Theory: Little's Law, M/M/1, and Multi-Server Systems 9.2 Discrete-Time Markov Chains: Transition Matrices and Steady-State Probabilities 9.3 Discrete-Event Simulation Principles and Monte Carlo Modeling
10 Chapter 10: Engineering Management, Project Planning & Performance Measurement
10.1 Organizational Structure, Leadership, and Worker Motivation Theories 10.2 Project Management: WBS, Critical Path Method (CPM), PERT, and Crashing 10.3 Earned Value Management (EVM), Decision Trees, and Risk Preference 10.4 Performance Measurement: Productivity, KPIs, Wage Systems, and the Balanced Scorecard
11 Chapter 11: Manufacturing & Production Systems
11.1 Manufacturing Processes, Material Processing, and Tolerancing 11.2 Assembly Line Balancing, Takt Time, Cycle Time, and Throughput 11.3 Sustainable Manufacturing, Waste Minimization, and Life-Cycle Assessment
12 Chapter 12: Production Planning, Inventory Control & Sequencing
12.1 Demand Forecasting Methods and Forecast Error Tracking 12.2 Aggregate Planning, Master Production Scheduling (MPS), and MRP 12.3 Deterministic Inventory Models: EOQ, EPQ, and Safety Stock 12.4 Job Sequencing, Dispatching Rules, and Flow Shop Scheduling
13 Chapter 13: Lean Systems & Theory of Constraints
13.1 Lean Foundations: Value Stream Mapping, Seven Wastes, and 5S 13.2 Pull Systems, Kanban, Just-In-Time (JIT), and SMED Setup Reduction 13.3 Theory of Constraints: Bottleneck Identification and Drum-Buffer-Rope
14 Chapter 14: Facilities Planning & Material Handling
14.1 Facility Location Analysis: Qualitative Factor Rating and Centroid Method 14.2 Facility Layout Design and Flow Analysis 14.3 Material Handling Equipment, Warehousing, and AS/RS
15 Chapter 15: Supply Chain Design & Logistics
15.1 Supply Chain Network Architecture and Transportation Modes 15.2 Distribution Strategies, Cross-Docking, and Vehicle Routing 15.3 The Bullwhip Effect, Risk Pooling, and Supply Chain Coordination
16 Chapter 16: Human Factors & Cognitive Ergonomics
16.1 Cognitive Engineering, Human-Machine Interface, Displays, and Controls 16.2 Anthropometric Principles, Percentile Design, and Biomechanical Posture 16.3 Environmental Ergonomics: Industrial Noise, Lighting, and Heat Stress
17 Chapter 17: Physical Ergonomics & Workplace Safety
17.1 Physical Ergonomics: The NIOSH Manual Lifting Equation 17.2 Cumulative Trauma Disorders and Postural Assessment 17.3 Workplace Safety: OSHA Standards, Hazard Analysis, and Control Hierarchy
18 Chapter 18: Work Design & Measurement
18.1 Methods Engineering, Process Charting, and Principles of Motion Economy 18.2 Direct Stopwatch Time Study: Observed Time, Performance Rating, and Allowances 18.3 Predetermined Time Systems, Work Sampling, and Learning Curves
19 Chapter 19: Quality Management, Six Sigma & Analytical Tools
19.1 Quality Philosophies, Total Quality Management, and Cost of Quality 19.2 Six Sigma DMAIC Methodology and Quality Function Deployment 19.3 The Seven Basic Quality Tools, Root Cause Analysis, and Taguchi Loss Function
20 Chapter 20: Statistical Process Control
20.1 Statistical Process Control Principles, Variation, and Run Rules 20.2 Variable Control Charts: X-bar & R, X-bar & S, and Individual-Moving Range 20.3 Attribute Control Charts: Defectives (p, np) and Defects (c, u)
21 Chapter 21: Process Capability & Acceptance Sampling
21.1 Process Capability Indices and Defect Levels 21.2 Acceptance Sampling Concepts and Operating Characteristic Curves 21.3 Sampling Risks, AQL, LTPD, and Standard Sampling Plans
22 Chapter 22: Systems Engineering & Life-Cycle Management
22.1 The Systems Engineering V-Model, Stakeholder Requirements, and Functional Architecture 22.2 Configuration Management, Interface Control, and Verification & Validation 22.3 Life-Cycle Costing, Maintainability, and System Availability
23 Chapter 23: Reliability Engineering & Risk Analysis
23.1 Reliability Mathematics, Hazard Rates, and the Bathtub Curve 23.2 System Reliability Configurations: Series, Parallel, and k-out-of-n Systems 23.3 Failure Modes and Effects Analysis and Fault Tree Analysis
23.1 Reliability Mathematics, Hazard Rates, and the Bathtub Curve
Key Takeaways Explain This Topic AI
Reliability R(t) = P(T > t) is the probability that a component performs its intended function without failure over mission time t; unreliability is defined by the cumulative distribution function F(t) = 1 - R(t), with probability density function f(t) = dF(t)/dt = -dR(t)/dt.
The hazard function (failure rate) h(t) = f(t)/R(t) measures the instantaneous conditional failure rate given survival to time t; integrating the hazard rate establishes the universal reliability identity R(t) = exp(-integral[0 to t] h(u) du).
The Bathtub Curve models equipment lifetime across three distinct regimes: (1) Infant Mortality (Decreasing Hazard Rate, DHR) caused by manufacturing defects and mitigated by burn-in screening; (2) Useful Life (Constant Hazard Rate, CHR) dominated by random shocks and modeled by the exponential distribution; and (3) Wear-Out (Increasing Hazard Rate, IHR) driven by fatigue, corrosion, and aging.
Under the exponential distribution with constant failure rate λ, reliability is R(t) = e^(-λt) and MTTF = 1/λ; at mission time t = MTTF, component reliability is exactly e^(-1) ≈ 36.8%, not 50%.
Mean Time To Failure (MTTF) applies strictly to non-repairable items, whereas Mean Time Between Failures (MTBF) applies to repairable systems where MTBF = MTTF + MTTR.
Last updated: September 2026
Reliability engineering provides the quantitative framework for predicting, assessing, and optimizing the operational life cycle of industrial components and systems. In the NCEES FE Industrial and Systems examination, reliability problems frequently test fundamental probability relationships, failure rate conversions, component survival over specific mission times, and the operational implications of the classical bathtub curve.
1. Fundamental Mathematics of Reliability
Reliability modeling treats the time-to-failure of a component as a continuous, non-negative random variable denoted by T T T ( T ≥ 0 T \ge 0 T ≥ 0 ). Four interrelated mathematical functions govern reliability analysis: the cumulative failure distribution F ( t ) F(t) F ( t ) , the reliability function R ( t ) R(t) R ( t ) , the failure probability density function f ( t ) f(t) f ( t ) , and the hazard function h ( t ) h(t) h ( t ) . Interrelationships of Reliability Functions
- ┌─────────────────┐
- │ PDF: f(t) │
- └────────┬────────┘
- │
- f(t) = -dR/dt │ f(t) = dF/dt
- f(t) = h(t)·R(t) │
- ▼
- ┌───────────────────────────┴───────────────────────────┐
- ▼ ▼
- ┌─────────────────┐ R(t) = 1 - F(t) ┌─────────────────┐
- │Reliability: R(t)│ ◄─────────────────────────────────► │Unreliability:F(t│
- └────────┬────────┘ └─────────────────┘
- │
- │ h(t) = f(t) / R(t) = - (1/R)·(dR/dt) = -d[ln R(t)]/dt
- ▼
- ┌─────────────────┐
- │ Hazard: h(t) │ ──► R(t) = exp[ - ∫₀ᵗ h(u) du ]
- └─────────────────┘
- Reliability Function R ( t ) R(t) R ( t )
The Reliability Function (also known as the survival function) represents the probability that a device or component functions without failure throughout the entire time interval from 0 0 0 to t t t under specified operating conditions: R ( t ) = P ( T > t ) R(t) = P(T > t) R ( t ) = P ( T > t )
By definition, for any physically realizable system:
R ( 0 ) = 1 R(0) = 1 R ( 0 ) = 1 (the unit is fully operational at time zero).
lim t → ∞ R ( t ) = 0 \lim_{t \to \infty} R(t) = 0 lim t → ∞ R ( t ) = 0 (all physical devices eventually fail).
R ( t ) R(t) R ( t ) is a monotonically non-increasing function of time ( d R ( t ) / d t ≤ 0 dR(t)/dt \le 0 d R ( t ) / d t ≤ 0 ).
Cumulative Distribution Function F ( t ) F(t) F ( t )
The Cumulative Distribution Function (CDF) , denoted as F ( t ) F(t) F ( t ) or unreliability Q ( t ) Q(t) Q ( t ) , defines the probability that the component fails at or before operating time t t t : F ( t ) = P ( T ≤ t ) = 1 − R ( t ) F(t) = P(T \le t) = 1 - R(t) F ( t ) = P ( T ≤ t ) = 1 − R ( t )
Correspondingly, F ( 0 ) = 0 F(0) = 0 F ( 0 ) = 0 , lim t → ∞ F ( t ) = 1 \lim_{t \to \infty} F(t) = 1 lim t → ∞ F ( t ) = 1 , and F ( t ) F(t) F ( t ) is monotonically non-decreasing.
Failure Probability Density Function f ( t ) f(t) f ( t )
The Probability Density Function (PDF) f ( t ) f(t) f ( t ) describes the unconditional failure rate per unit time. Mathematically, it is the first derivative of the cumulative failure distribution: f ( t ) = d F ( t ) d t = − d R ( t ) d t f(t) = \frac{dF(t)}{dt} = -\frac{dR(t)}{dt} f ( t ) = d t d F ( t ) = − d t d R ( t )
Integrating the PDF yields the unreliability and reliability over an operating horizon: F ( t ) = ∫ 0 t f ( u ) d u , R ( t ) = ∫ t ∞ f ( u ) d u F(t) = \int_{0}^{t} f(u)\,du, \qquad R(t) = \int_{t}^{\infty} f(u)\,du F ( t ) = ∫ 0 t f ( u ) d u , R ( t ) = ∫ t ∞ f ( u ) d u
Hazard Rate / Failure Rate Function h ( t ) h(t) h ( t )
The Hazard Function h ( t ) h(t) h ( t ) (often denoted λ ( t ) \lambda(t) λ ( t ) ) represents the instantaneous conditional failure rate . It is the conditional probability that a component fails in the infinitesimal interval [ t , t + Δ t ] [t, t + \Delta t] [ t , t + Δ t ] , given that it has survived up to time t t t : h ( t ) = lim Δ t → 0 P ( t < T ≤ t + Δ t ∣ T > t ) Δ t = f ( t ) R ( t ) h(t) = \lim_{\Delta t \to 0} \frac{P(t < T \le t + \Delta t \mid T > t)}{\Delta t} = \frac{f(t)}{R(t)} h ( t ) = Δ t → 0 lim Δ t P ( t < T ≤ t + Δ t ∣ T > t ) = R ( t ) f ( t )
Substituting f ( t ) = − d R ( t ) d t f(t) = -\frac{dR(t)}{dt} f ( t ) = − d t d R ( t ) into the hazard definition reveals an exact differential relationship: h ( t ) = − 1 R ( t ) d R ( t ) d t = − d d t [ ln R ( t ) ] h(t) = -\frac{1}{R(t)}\frac{dR(t)}{dt} = -\frac{d}{dt}\left[\ln R(t)\right] h ( t ) = − R ( t ) 1 d t d R ( t ) = − d t d [ ln R ( t ) ]
Integrating both sides from 0 0 0 to t t t with the boundary condition R ( 0 ) = 1 R(0) = 1 R ( 0 ) = 1 : ∫ 0 t h ( u ) d u = − [ ln R ( t ) − ln R ( 0 ) ] = − ln R ( t ) \int_{0}^{t} h(u)\,du = -\left[\ln R(t) - \ln R(0)\right] = -\ln R(t) ∫ 0 t h ( u ) d u = − [ ln R ( t ) − ln R ( 0 ) ] = − ln R ( t )
Exponentiating both sides yields the fundamental master equation of reliability engineering : R ( t ) = exp ( − ∫ 0 t h ( u ) d u ) = e − H ( t ) R(t) = \exp\left( -\int_{0}^{t} h(u)\,du \right) = e^{-H(t)} R ( t ) = exp ( − ∫ 0 t h ( u ) d u ) = e − H ( t )
where H ( t ) = ∫ 0 t h ( u ) d u H(t) = \int_{0}^{t} h(u)\,du H ( t ) = ∫ 0 t h ( u ) d u is the cumulative hazard function.
Mean Time to Failure (MTTF)
For non-repairable components, the Mean Time to Failure (MTTF) represents the expected value of time-to-failure T T T : MTTF = E [ T ] = ∫ 0 ∞ t f ( t ) d t \text{MTTF} = E[T] = \int_{0}^{\infty} t f(t)\,dt MTTF = E [ T ] = ∫ 0 ∞ t f ( t ) d t
Applying integration by parts ( u = t u = t u = t , d v = f ( t ) d t = − d R ( t ) dv = f(t)dt = -dR(t) d v = f ( t ) d t = − d R ( t ) ): MTTF = [ − t R ( t ) ] 0 ∞ + ∫ 0 ∞ R ( t ) d t \text{MTTF} = \left[-t R(t)\right]_{0}^{\infty} + \int_{0}^{\infty} R(t)\,dt MTTF = [ − tR ( t ) ] 0 ∞ + ∫ 0 ∞ R ( t ) d t
Assuming lim t → ∞ t R ( t ) = 0 \lim_{t \to \infty} t R(t) = 0 lim t → ∞ tR ( t ) = 0 (which holds for all practical engineering distributions), the expected life simplifies to the area under the reliability curve: MTTF = ∫ 0 ∞ R ( t ) d t \text{MTTF} = \int_{0}^{\infty} R(t)\,dt MTTF = ∫ 0 ∞ R ( t ) d t
2. The Bathtub Curve and Failure Rate Regimes
In physical and industrial equipment, the hazard function h ( t ) h(t) h ( t ) typically varies over the operating lifespan according to the classical Bathtub Curve . The curve comprises three distinct engineering phases: The Classical Bathtub Curve
- Hazard Rate
- h(t) ▲
- │ Phase I: Infant Mortality Phase II: Useful Life Phase III: Wear-Out
- │ (Burn-in / DHR) (Constant / CHR) (Aging / IHR)
- │
- │ ╲ ╱
- │ ╲ ╱
- │ ╲ ╱
- │ ╲ ╱
- │ ╲───────────────────────────────────────────╱
- │ h(t) = λ = constant
- └─────────────────────────────────────────────────────────────►
- 0 t_burn-in t_wear-out Time (t)
- Phase I: Infant Mortality / Burn-In Period (Decreasing Hazard Rate, DHR)
Behavior : The hazard rate starts high and decreases rapidly over time ( d h ( t ) / d t < 0 dh(t)/dt < 0 d h ( t ) / d t < 0 ).
Physical Root Causes : Substandard manufacturing materials, cold solder joints, microscopic weld porosity, chemical contamination, assembly misalignment, and out-of-tolerance components.
Engineering Mitigation : Quality engineers implement Environmental Stress Screening (ESS) , thermal cycling, power vibration testing, and pre-delivery burn-in procedures. Units that harbor latent flaws fail in the factory before customer shipment. Surviving components emerge into Phase II.
Statistical Distribution : Commonly modeled using the Weibull distribution with shape parameter β < 1.0 \beta < 1.0 β < 1.0 .
Phase II: Useful Life Period (Constant Hazard Rate, CHR)
Behavior : The hazard rate remains essentially flat and constant over time: h ( t ) = λ h(t) = \lambda h ( t ) = λ .
Physical Root Causes : Failures in this operating window are triggered by purely random, unpredictable external shocks (such as lightning surges, hydraulic pressure spikes, severe foreign object debris, or operator handling error) rather than intrinsic material aging.
Engineering Significance : Because failure is memoryless during this phase, preventive maintenance (replacing a working component simply because it has accumulated operating hours) provides zero reliability improvement . The part does not age during useful life.
Statistical Distribution : Strictly governed by the Exponential Distribution ( h ( t ) = λ h(t) = \lambda h ( t ) = λ , Weibull shape parameter β = 1.0 \beta = 1.0 β = 1.0 ).
Phase III: Wear-Out Period (Increasing Hazard Rate, IHR)
Behavior : The hazard rate climbs steeply as operating hours advance ( d h ( t ) / d t > 0 dh(t)/dt > 0 d h ( t ) / d t > 0 ).
Physical Root Causes : Cumulative mechanical wear, metal fatigue crack propagation, oxidation, thermal degradation of insulation, bearing friction, seal embrittlement, and chemical depletion of lubricants.
Engineering Mitigation : Preventive maintenance, scheduled overhauls, and periodic component replacement prior to reaching the wear-out threshold t wear-out t_{\text{wear-out}} t wear-out are highly effective.
Statistical Distribution : Modeled by Weibull distribution with shape parameter β > 1.0 \beta > 1.0 β > 1.0 (e.g., β ≈ 2 \beta \approx 2 β ≈ 2 to 4 4 4 for mechanical fatigue) or the Normal/Log-normal distribution.
Phase Name Hazard Rate Derivative Dominant Physical Failure Mechanism Engineering Treatment
I Infant Mortality / Burn-in d h ( t ) / d t < 0 dh(t)/dt < 0 d h ( t ) / d t < 0 (Decreasing) Defective raw materials, manufacturing errors, assembly flaws Environmental stress screening (ESS), factory burn-in testing
II Useful Life d h ( t ) / d t = 0 dh(t)/dt = 0 d h ( t ) / d t = 0 (Constant λ \lambda λ ) Unpredictable random external shocks, operational overstress Robust stress derating, transient suppression; no aging effect
III Wear-Out d h ( t ) / d t > 0 dh(t)/dt > 0 d h ( t ) / d t > 0 (Increasing) Mechanical fatigue, friction, bearing wear, insulation breakdown Predictive condition monitoring, scheduled replacement, overhaul
3. The Exponential Reliability Model
The exponential distribution is the primary workhorse model for the FE exam because it mathematically embodies the constant hazard rate assumption of Phase II.
Mathematical Formulation
Setting h ( t ) = λ h(t) = \lambda h ( t ) = λ (where λ \lambda λ is the constant failure rate expressed in failures per unit time, such as failures per hour): R ( t ) = exp ( − ∫ 0 t λ d u ) = e − λ t R(t) = \exp\left( -\int_{0}^{t} \lambda\,du \right) = e^{-\lambda t} R ( t ) = exp ( − ∫ 0 t λ d u ) = e − λ t
The cumulative failure probability (unreliability) is: F ( t ) = 1 − e − λ t F(t) = 1 - e^{-\lambda t} F ( t ) = 1 − e − λ t
The probability density function is: f ( t ) = − d R ( t ) d t = λ e − λ t f(t) = -\frac{dR(t)}{dt} = \lambda e^{-\lambda t} f ( t ) = − d t d R ( t ) = λ e − λ t
Mean Time to Failure (MTTF)
Evaluating the mean time to failure for an exponentially distributed component: MTTF = ∫ 0 ∞ R ( t ) d t = ∫ 0 ∞ e − λ t d t = [ − 1 λ e − λ t ] 0 ∞ = 0 − ( − 1 λ ) = 1 λ \text{MTTF} = \int_{0}^{\infty} R(t)\,dt = \int_{0}^{\infty} e^{-\lambda t}\,dt = \left[ -\frac{1}{\lambda} e^{-\lambda t} \right]_{0}^{\infty} = 0 - \left(-\frac{1}{\lambda}\right) = \frac{1}{\lambda} MTTF = ∫ 0 ∞ R ( t ) d t = ∫ 0 ∞ e − λ t d t = [ − λ 1 e − λ t ] 0 ∞ = 0 − ( − λ 1 ) = λ 1
Therefore: MTTF = 1 λ ⟺ λ = 1 MTTF \text{MTTF} = \frac{1}{\lambda} \iff \lambda = \frac{1}{\text{MTTF}} MTTF = λ 1 ⟺ λ = MTTF 1
The Critical R ( MTTF ) R(\text{MTTF}) R ( MTTF ) Relationship
A perennial exam trap concerns the survival probability of a component operating exactly up to its MTTF ( t = MTTF = 1 / λ t = \text{MTTF} = 1/\lambda t = MTTF = 1/ λ ): R ( MTTF ) = e − λ ( 1 / λ ) = e − 1 = 1 2.71828 ≈ 0.3679 ( 36.8 % ) R(\text{MTTF}) = e^{-\lambda (1/\lambda)} = e^{-1} = \frac{1}{2.71828} \approx 0.3679 \quad (36.8\%) R ( MTTF ) = e − λ ( 1/ λ ) = e − 1 = 2.71828 1 ≈ 0.3679 ( 36.8% )
Uninformed candidates often guess that 50% of components survive to their mean life. In reality, only 36.8% survive to the MTTF under an exponential model, while 63.2% of components will fail prior to reaching the MTTF ( F ( MTTF ) = 1 − e − 1 ≈ 0.6321 F(\text{MTTF}) = 1 - e^{-1} \approx 0.6321 F ( MTTF ) = 1 − e − 1 ≈ 0.6321 ). The median life t med t_{\text{med}} t med (where R ( t ) = 0.50 R(t) = 0.50 R ( t ) = 0.50 ) occurs much earlier: ≠ − λ t med = 0.50 ⟹ − λ t med = ln ( 0.50 ) = − 0.6931 ⟹ t med = 0.6931 λ = 0.6931 × MTTF \ne^{-\lambda t_{\text{med}}} = 0.50 \implies -\lambda t_{\text{med}} = \ln(0.50) = -0.6931 \implies t_{\text{med}} = \frac{0.6931}{\lambda} = 0.6931 \times \text{MTTF} = − λ t med = 0.50 ⟹ − λ t med = ln ( 0.50 ) = − 0.6931 ⟹ t med = λ 0.6931 = 0.6931 × MTTF
The Memoryless Property
The exponential distribution is the unique continuous distribution possessing the memoryless property : P ( T > t + s ∣ T > s ) = P ( T > t + s ) P ( T > s ) = e − λ ( t + s ) e − λ s = e − λ t = P ( T > t ) P(T > t + s \mid T > s) = \frac{P(T > t + s)}{P(T > s)} = \frac{e^{-\lambda(t+s)}}{e^{-\lambda s}} = e^{-\lambda t} = P(T > t) P ( T > t + s ∣ T > s ) = P ( T > s ) P ( T > t + s ) = e − λ s e − λ ( t + s ) = e − λ t = P ( T > t )
In plain physical terms: an old component that has operated for s s s hours without failure has the exact same probability of surviving the next t t t hours as a brand-new component straight out of the box. Used equipment does not wear out while operating in the constant failure rate zone.
4. MTBF vs. MTTF and System Availability
The FE exam expects clear distinction between repairable and non-repairable terminology. Life Cycle of a Repairable System (MTBF)
- ┌─────────────────────────────── MTBF ───────────────────────────────┐
- │ │
- ├──────────────────────────── MTTF ──────────────────────────┤─ MTTR ┤
- │ │ │
- ▼ ▼ ▼
- ┌─────────────────────────────────────────────────────────────┐┌───────┐
- │ Operating State ││ Repair│
- │ (System UP) ││ (DOWN)│
- └─────────────────────────────────────────────────────────────┘└───────┘
- 0 t_fail t_repaired
- Non-Repairable Items: MTTF
Used for items discarded upon initial failure (e.g., microprocessors, light bulbs, solid rocket boosters, structural rivets).
MTTF = 1 / λ \text{MTTF} = 1/\lambda MTTF = 1/ λ .
Repairable Systems: MTBF and MTTR
Mean Time Between Failures (MTBF) applies to systems restored to operation through maintenance (e.g., industrial compressors, CNC machine tools, chemical pumps).
Mean Time to Repair (MTTR) is the average active maintenance time required to diagnose, repair, and test the failed asset.
The relationship across a recurring operational cycle is: MTBF = MTTF + MTTR \text{MTBF} = \text{MTTF} + \text{MTTR} MTBF = MTTF + MTTR In many high-reliability industrial assets where MTTR ≪ MTTF \text{MTTR} \ll \text{MTTF} MTTR ≪ MTTF (e.g., an MTTR of 4 hours vs. an MTTF of 5,000 hours), engineers approximate MTBF ≈ MTTF \text{MTBF} \approx \text{MTTF} MTBF ≈ MTTF . On quantitative exam items, however, ensure you include MTTR when specified.
Inherent System Availability ( A i A_i A i )
Availability measures the percentage of operating time an asset is operational: A = Uptime Total Time = MTTF MTTF + MTTR = MTBF − MTTR MTBF A = \frac{\text{Uptime}}{\text{Total Time}} = \frac{\text{MTTF}}{\text{MTTF} + \text{MTTR}} = \frac{\text{MTBF} - \text{MTTR}}{\text{MTBF}} A = Total Time Uptime = MTTF + MTTR MTTF = MTBF MTBF − MTTR
- 5. Step-by-Step Worked Engineering Calculations
- Worked Example 23.1.1: Hazard Rate and Mission Reliability
Problem : A fleet of precision servo actuators used in robotic pick-and-place assembly cells exhibits an exponential failure distribution with an empirical constant failure rate of λ = 0.00025 failures per operating hour \lambda = 0.00025\text{ failures per operating hour} λ = 0.00025 failures per operating hour .
Calculate the actuator's Mean Time to Failure (MTTF).
Determine the reliability of a servo actuator over a standard industrial operating mission of t = 1 , 200 hours t = 1,200\text{ hours} t = 1 , 200 hours .
What is the probability that an actuator survives an additional 1 , 200 hours 1,200\text{ hours} 1 , 200 hours , given that it has already operated successfully for 3 , 000 hours 3,000\text{ hours} 3 , 000 hours without failure?
Calculate the operating time t 0.90 t_{0.90} t 0.90 at which the actuator reliability degrades to 90%.
Solution :
Step 1: Compute MTTF MTTF = 1 λ = 1 0.00025 hr − 1 = 4 , 000 operating hours \text{MTTF} = \frac{1}{\lambda} = \frac{1}{0.00025\text{ hr}^{-1}} = 4,000\text{ operating hours} MTTF = λ 1 = 0.00025 hr − 1 1 = 4 , 000 operating hours
Step 2: Reliability over 1,200 hours R ( 1 , 200 ) = e − λ t = e − ( 0.00025 ) ( 1 , 200 ) = e − 0.30 ≈ 0.7408 ( 74.08 % ) R(1,200) = e^{-\lambda t} = e^{-(0.00025)(1,200)} = e^{-0.30} \approx 0.7408 \quad (74.08\%) R ( 1 , 200 ) = e − λ t = e − ( 0.00025 ) ( 1 , 200 ) = e − 0.30 ≈ 0.7408 ( 74.08% )
Step 3: Conditional Survival Probability By the memoryless property of the exponential distribution: P ( T > 3 , 000 + 1 , 200 ∣ T > 3 , 000 ) = P ( T > 1 , 200 ) = R ( 1 , 200 ) = e − 0.30 ≈ 0.7408 P(T > 3,000 + 1,200 \mid T > 3,000) = P(T > 1,200) = R(1,200) = e^{-0.30} \approx 0.7408 P ( T > 3 , 000 + 1 , 200 ∣ T > 3 , 000 ) = P ( T > 1 , 200 ) = R ( 1 , 200 ) = e − 0.30 ≈ 0.7408
The prior 3,000 hours of flawless operation neither degrade nor improve the actuator's subsequent 1,200-hour survival probability.
Step 4: Operating Time for 90% Reliability Set R ( t ) = 0.90 R(t) = 0.90 R ( t ) = 0.90 : ≠ − λ t = 0.90 ⟹ − λ t = ln ( 0.90 ) = − 0.10536 \ne^{-\lambda t} = 0.90 \implies -\lambda t = \ln(0.90) = -0.10536 = − λ t = 0.90 ⟹ − λ t = ln ( 0.90 ) = − 0.10536 t = 0.10536 0.00025 = 421.44 hours t = \frac{0.10536}{0.00025} = 421.44\text{ hours} t = 0.00025 0.10536 = 421.44 hours
Worked Example 23.1.2: General Hazard Rate Integration and Wear-Out
Problem : An experimental turbine seal operates in a corrosive chemical environment where its failure rate increases linearly with time according to h ( t ) = k t h(t) = k t h ( t ) = k t , where k = 4.0 × 10 − 6 failures/hour 2 k = 4.0 \times 10^{-6}\text{ failures/hour}^2 k = 4.0 × 1 0 − 6 failures/hour 2 . Find the reliability function R ( t ) R(t) R ( t ) and compute the probability that the seal survives an operating run of t = 500 hours t = 500\text{ hours} t = 500 hours .
Solution :
Step 1: Apply the Master Hazard Integral Equation R ( t ) = exp ( − ∫ 0 t h ( u ) d u ) = exp ( − ∫ 0 t k u d u ) = exp ( − k t 2 2 ) R(t) = \exp\left( -\int_{0}^{t} h(u)\,du \right) = \exp\left( -\int_{0}^{t} k u\,du \right) = \exp\left( -\frac{k t^2}{2} \right) R ( t ) = exp ( − ∫ 0 t h ( u ) d u ) = exp ( − ∫ 0 t k u d u ) = exp ( − 2 k t 2 )
(Note: This matches a Weibull distribution with shape parameter β = 2 \beta = 2 β = 2 , a Rayleigh distribution typical of linearly accelerating mechanical wear).
Step 2: Evaluate at t = 500 t = 500 t = 500 hours − k t 2 2 = − ( 4.0 × 10 − 6 ) ( 500 ) 2 2 = − ( 4.0 × 10 − 6 ) ( 250 , 000 ) 2 = − 1.0 2 = − 0.50 -\frac{k t^2}{2} = -\frac{(4.0 \times 10^{-6})(500)^2}{2} = -\frac{(4.0 \times 10^{-6})(250,000)}{2} = -\frac{1.0}{2} = -0.50 − 2 k t 2 = − 2 ( 4.0 × 1 0 − 6 ) ( 500 ) 2 = − 2 ( 4.0 × 1 0 − 6 ) ( 250 , 000 ) = − 2 1.0 = − 0.50 R ( 500 ) = e − 0.50 ≈ 0.6065 ( 60.65 % ) R(500) = e^{-0.50} \approx 0.6065 \quad (60.65\%) R ( 500 ) = e − 0.50 ≈ 0.6065 ( 60.65% )
6. NCEES Reference Handbook Tips & Realistic Exam Traps
Unit Consistency with Failure Rates : Failure rates are frequently quoted in units of failures per million hours ( 10 − 6 / hr 10^{-6}/\text{hr} 1 0 − 6 / hr ) or FITs (Failures in Time) , where 1 FIT = 1 failure per 10 9 hours 1\text{ FIT} = 1\text{ failure per } 10^9\text{ hours} 1 FIT = 1 failure per 1 0 9 hours . Always convert λ \lambda λ into consistent units matching the mission time t t t before evaluating e − λ t e^{-\lambda t} e − λ t .
R ( MTTF ) ≠ 0.50 R(\text{MTTF}) \ne 0.50 R ( MTTF ) = 0.50 : Do not fall for exam distractors asserting that 50% of exponential components survive to MTTF. R ( MTTF ) = e − 1 ≈ 0.368 R(\text{MTTF}) = e^{-1} \approx 0.368 R ( MTTF ) = e − 1 ≈ 0.368 . The median life is 0.693 × MTTF 0.693\times\text{MTTF} 0.693 × MTTF .
Preventive Maintenance on Exponential Components : Questions often describe a system operating in Phase II (useful life) and ask how much reliability increases if preventive replacements are conducted twice as often. The answer is zero increase ; because the hazard rate is constant, replacing working components that have not entered wear-out provides no statistical benefit and wastes capital.
Distinguishing f ( t ) f(t) f ( t ) vs. h ( t ) h(t) h ( t ) : The probability density function f ( t ) f(t) f ( t ) is the unconditional failure probability density across the whole population from time zero, whereas h ( t ) h(t) h ( t ) is the conditional failure rate among components that have survived up to time t t t . Because R ( t ) ≤ 1 R(t) \le 1 R ( t ) ≤ 1 , h ( t ) = f ( t ) / R ( t ) ≥ f ( t ) h(t) = f(t)/R(t) \ge f(t) h ( t ) = f ( t ) / R ( t ) ≥ f ( t ) .