Study guide

1.3 Reference Handbook Search, Units, and Calculator Workflow

FE Mechanical Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 FE Mechanical Exam Map, Handbook, and Strategy

1.1 Official NCEES FE Mechanical Facts 1.2 Scoring, Attempts, Fees, and State Board Context 1.3 Reference Handbook Search, Units, and Calculator Workflow 1.4 Official Content Specification and Study Allocation 1.5 Pacing, Flagging, and Error Classification 1.6 How FE Mechanical Questions Test Model Selection

2 Math, Economics, Ethics, and Tools

Calculus, Differential Equations, and Linear Algebra Review Numerical Methods, Vectors, and Engineering Models Probability, Statistics, and Uncertainty Engineering Economics, Cash Flow, and Decision Methods Ethics, Professional Practice, and Public Welfare Calculator Workflows, Algebra, and Unit Checks

3 Mechanics Core

Statics: Free-Body Diagrams and Equilibrium Trusses, Frames, Centroids, and Friction Dynamics: Kinematics, Newton's Laws, and Relative Motion Work, Energy, Impulse, Momentum, Rotation, and Vibration Mechanics of Materials: Stress, Strain, and Torsion Beams, Deflection, Columns, Mohr's Circle, and Combined Loading

4 Thermal-Fluids Core

Fluid Properties, Statics, and Dimensional Analysis Bernoulli, Energy Equation, Pipe Losses, and Pumps Momentum Control Volumes and Turbomachinery Thermodynamic Properties, Energy Balances, and Ideal Gases Power, Refrigeration Cycles, Psychrometrics, and Second Law Heat Transfer: Conduction, Convection, Radiation, and Heat Exchangers

5 Systems, Design, and Final Readiness

5.1 Materials Processing, Failure, and Selection 5.2 Measurements, Instrumentation, Sensors, Circuits, and Uncertainty 5.3 Controls, Transfer Functions, Response, and Feedback 5.4 Mechanical Design: Shafts, Bearings, Gears, Springs, and Fasteners 5.5 Pressure Vessels, Welds, Fatigue, GD&T, and Design Safety 5.6 Final Mixed Practice, Readiness, and Exam-Day Plan

6 Integrated FE Mechanical Practice

Mixed Mechanics and Materials Practice Thermal-Fluid Design and Energy Cases Controls, Instrumentation, and Uncertainty Cases Mechanical Design Failure Mode Cases Full-Exam Simulation, Review, and Remediation Last-Week Handbook, Units, and Calculator Drills

1.3 Reference Handbook Search, Units, and Calculator Workflow

Key Takeaways Explain This Topic AI

Handbook fluency is itself an exam skill, because the supplied reference gives formulas and data but not problem-solving procedures.

Search the electronic handbook with official engineering terms such as Reynolds, Darcy, Mohr, or present worth rather than page numbers.

FE Mechanical mixes SI and USCS units, so writing a target unit line before computing prevents lbm/lbf, gauge/absolute, and area-conversion traps.

Only Casio fx-115/fx-991, HP 33s/35s, and TI-30X/TI-36X series calculators are NCEES-approved; no programmable, graphing, or CAS models.

Use one approved calculator model throughout preparation and run mode, stored-value, and parentheses checks before every timed set.

Last updated: June 2026

Treat the handbook as a tool, not a textbook

NCEES supplies an electronic FE Reference Handbook during the exam and lets you download a free personal-study copy from your MyNCEES account beforehand. The handbook is valuable because it holds formulas, property tables, charts, constants, and conversion factors. It is limited because it never tells you which model to choose, how to draw a free-body diagram, where to place a control surface, or whether a stated pressure is gauge or absolute. Effective preparation therefore fuses lookup speed with engineering judgment .

Start practice sessions with the handbook open. Even when you know a formula by heart, retrieve it from the handbook often enough that the official notation and sign conventions feel native. This prevents two frequent misses: applying a classroom version with a different sign convention, and burning two minutes hunting for a relationship you could have surfaced in twenty seconds with the right search term.

  • Problem cue Handbook search or navigation target
  • Pipe head loss Darcy, friction factor, Reynolds, Moody
  • Beam deflection beam, deflection, moment, inertia
  • Stress transformation Mohr, principal stress, transformation
  • Steam or property problem saturated, superheated, quality
  • Refrigeration or heat pump COP, vapor compression, refrigerant
  • Engineering economics present worth, annual worth, depreciation
  • Controls transfer function, damping, time constant
  • Measurements uncertainty, accuracy, precision

Build your own search-cue table during study so the lookup is reflexive on exam day rather than improvised under time pressure.

Unit discipline for mechanical problems

FE Mechanical mixes SI and U.S. Customary System (USCS) units, which makes unit control a scoring issue rather than cosmetic bookkeeping. Write the target unit before you compute. In dynamics and fluids, separate mass from weight (the lbm/lbf distinction and the gravitational constant gc near 32.2 lbm-ft/lbf-s^2). In thermodynamics, keep temperature absolute in gas laws and any T^4 radiation term. In pressure problems, decide gauge versus absolute up front. In heat transfer, avoid silently mixing W, kW, Btu/hr, ft, in, square units, and time units.

  • Common unit trap Fast diagnostic
  • lbm and lbf confusion A factor near 32.2 or a gc term appears
  • in^2 versus ft^2 A factor near 144 appears
  • min versus s A factor near 60 appears
  • kW versus W, kJ versus J A factor near 1000 appears
  • Celsius in radiation or gas law Temperature must be absolute (K or R)
  • Gauge pressure in an ideal-gas relation Use absolute pressure
  • Approved calculators and a clean workflow

Use only an NCEES-approved calculator the entire time you study. As of the current policy, the approved families are: any Casio fx-115 or fx-991 model, the Hewlett Packard HP 33s and HP 35s , and any Texas Instruments TI-30X or TI-36X model. No programmable, graphing, or CAS calculators are permitted, and the list is reviewed annually — confirm yours before exam day.

The specific model matters less than fluency with it. Before every timed set, run a quick pre-flight: angle mode (degrees vs radians), display format , real/complex mode, and clear any stored values . Drill the statistics functions, the equation solver if your model has one, complex numbers for AC circuits, and matrix or regression features if relevant. For mechanical work, parentheses discipline beats fancy features — enter numerator and denominator groups deliberately for heat-exchanger, beam, and economics formulas. After each result, run a reasonableness check on sign, magnitude, unit, and limiting behavior.

If a pump efficiency exceeds 100%, a heat rate goes negative without a defined sign convention, or bearing life grows as load grows, stop and inspect the setup before choosing the nearest option. The repeatable sequence is: classify the model, find the handbook relationship, write units, calculate cleanly, then check magnitude.

Building lookup and unit habits into every session

The reason handbook, units, and calculator are bundled into one section is that they fail together under time pressure. A candidate who knows the physics can still lose a question by searching the wrong term, by entering 25 instead of 298 for an absolute temperature, or by fumbling parentheses on a long expression. The fix is to rehearse all three as a single fluent motion rather than as separate skills. From your first week, never solve a practice problem with the handbook closed, never write an equation without a target-unit line above it, and never reach for a calculator you will not use on exam day.

A short daily warm-up cements this. Spend ten minutes retrieving five random relationships from the handbook by search term, converting two quantities between SI and USCS, and running one statistics or equation-solver routine on your approved calculator. Over a study cycle this builds the muscle memory that separates candidates who finish with time to spare from those who run out — and it does so without adding new engineering theory, only by making the mechanics of execution automatic. On exam day, that fluency is worth several questions you would otherwise lose to friction rather than to knowledge.