Study guide
Dynamics: Kinematics, Newton's Laws, and Relative Motion
FE Mechanical Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 FE Mechanical Exam Map, Handbook, and Strategy
1.1 Official NCEES FE Mechanical Facts 1.2 Scoring, Attempts, Fees, and State Board Context 1.3 Reference Handbook Search, Units, and Calculator Workflow 1.4 Official Content Specification and Study Allocation 1.5 Pacing, Flagging, and Error Classification 1.6 How FE Mechanical Questions Test Model Selection
2 Math, Economics, Ethics, and Tools
Calculus, Differential Equations, and Linear Algebra Review Numerical Methods, Vectors, and Engineering Models Probability, Statistics, and Uncertainty Engineering Economics, Cash Flow, and Decision Methods Ethics, Professional Practice, and Public Welfare Calculator Workflows, Algebra, and Unit Checks
3 Mechanics Core
Statics: Free-Body Diagrams and Equilibrium Trusses, Frames, Centroids, and Friction Dynamics: Kinematics, Newton's Laws, and Relative Motion Work, Energy, Impulse, Momentum, Rotation, and Vibration Mechanics of Materials: Stress, Strain, and Torsion Beams, Deflection, Columns, Mohr's Circle, and Combined Loading
4 Thermal-Fluids Core
Fluid Properties, Statics, and Dimensional Analysis Bernoulli, Energy Equation, Pipe Losses, and Pumps Momentum Control Volumes and Turbomachinery Thermodynamic Properties, Energy Balances, and Ideal Gases Power, Refrigeration Cycles, Psychrometrics, and Second Law Heat Transfer: Conduction, Convection, Radiation, and Heat Exchangers
5 Systems, Design, and Final Readiness
5.1 Materials Processing, Failure, and Selection 5.2 Measurements, Instrumentation, Sensors, Circuits, and Uncertainty 5.3 Controls, Transfer Functions, Response, and Feedback 5.4 Mechanical Design: Shafts, Bearings, Gears, Springs, and Fasteners 5.5 Pressure Vessels, Welds, Fatigue, GD&T, and Design Safety 5.6 Final Mixed Practice, Readiness, and Exam-Day Plan
6 Integrated FE Mechanical Practice
Mixed Mechanics and Materials Practice Thermal-Fluid Design and Energy Cases Controls, Instrumentation, and Uncertainty Cases Mechanical Design Failure Mode Cases Full-Exam Simulation, Review, and Remediation Last-Week Handbook, Units, and Calculator Drills
Dynamics: Kinematics, Newton's Laws, and Relative Motion
Key Takeaways Explain This Topic AI
Constant-acceleration kinematics: v = v₀ + at, s = s₀ + v₀t + ½at², v² = v₀² + 2a(s − s₀).
Projectile motion has a_x = 0 and a_y = −g; horizontal and vertical motions are independent.
Newton's second law: ΣF = ma; in USCS use F = (W/g)a with g = 32.2 ft/s².
Normal-tangential motion: a_t = dv/dt along the path, a_n = v²/ρ toward the center of curvature.
Relative motion: v_B = v_A + v_{B/A}; the same vector rule applies to accelerations.
Last updated: June 2026
Kinematics: describing motion
Kinematics relates position s, velocity v, and acceleration a without asking what causes the motion. The general differential relations from the Handbook are v = ds/dt, a = dv/dt, and the chain-rule form a ds = v dv, which is invaluable when acceleration depends on position rather than time.
When acceleration is constant , integrate once to get the three standard equations: v = v 0 + a t v = v_0 + at v = v 0 + a t s = s 0 + v 0 t + 1 2 a t 2 s = s_0 + v_0 t + \tfrac{1}{2}at^2 s = s 0 + v 0 t + 2 1 a t 2 v 2 = v 0 2 + 2 a ( s − s 0 ) v^2 = v_0^2 + 2a(s - s_0) v 2 = v 0 2 + 2 a ( s − s 0 )
The third equation is time-free and is the fastest route when time is neither given nor asked. Worked example: a car brakes from 30 m/s to rest over 90 m. Using v² = v₀² + 2as: 0 = 30² + 2a(90), a = −5 m/s². Time to stop: 0 = 30 + (−5)t → t = 6 s.
Projectile motion
A projectile under gravity alone has a_x = 0 and a_y = −g , so horizontal velocity is constant and vertical motion is constant-acceleration. The two directions decouple and share only the elapsed time. A ball thrown at v₀ = 20 m/s at 30° has v₀x = 20cos30° = 17.3 m/s and v₀y = 20sin30° = 10 m/s. Time to apex: v_y = 0 = 10 − 9.81t → t = 1.02 s; total flight 2.04 s; range = 17.3(2.04) = 35.3 m. Maximum height = v₀y²/(2g) = 10²/19.62 = 5.1 m.
Curvilinear motion: normal-tangential coordinates
For motion along a curved path, normal-tangential (n-t) coordinates split acceleration into two physically distinct parts: a t = d v d t ( speeds up/slows down ) , a n = v 2 ρ ( turns, toward center ) a_t = \frac{dv}{dt} \quad (\text{speeds up/slows down}), \qquad a_n = \frac{v^2}{\rho} \quad (\text{turns, toward center}) a t = d t d v ( speeds up/slows down ) , a n = ρ v 2 ( turns, toward center )
where ρ is the radius of curvature. Even at constant speed (a_t = 0) a turning body still accelerates because a_n ≠ 0 — this is why a car at steady speed on a curve needs friction. The total magnitude is a = √(a_t² + a_n²). A car at 25 m/s on a 200 m radius curve has a_n = 25²/200 = 3.13 m/s² directed toward the curve center.
Newton's second law and the kinetic diagram
Kinetics links force to motion through Newton's second law , ΣF = ma. The reliable FE method is to draw a free-body diagram (all real forces) beside a kinetic diagram (the ma vector), then equate components. In SI, m is in kg and the equation is direct. In USCS , weight and mass differ: ΣF = (W/g)a with g = 32.2 ft/s², so a 64.4 lb weight has mass W/g = 2 slugs.
- Coordinate frame When to use Key components
- Rectangular (x-y) Projectiles, blocks on slopes ΣF_x = ma_x, ΣF_y = ma_y
- Normal-tangential Curved paths, vehicles in turns ΣF_n = m v²/ρ, ΣF_t = m a_t
- Polar (r-θ) Central-force, rotating arms a_r = r̈ − rθ̇², a_θ = rθ̈ + 2ṙθ̇
Classic FE problem: a 1500 kg car rounds a flat 120 m radius curve at 20 m/s. Required centripetal force = m v²/ρ = 1500(400)/120 = 5000 N, supplied by friction f = μ_s N = μ_s mg. Minimum μ_s = (v²/ρ)/g = (400/120)/9.81 = 0.34.
Relative motion
When two bodies move, their velocities relate by vector addition: v ⃗ B = v ⃗ A + v ⃗ B / A \vec{v}_B = \vec{v}_A + \vec{v}_{B/A} v B = v A + v B / A
and the identical rule holds for accelerations. v_{B/A} is the velocity of B as seen from A . Treat each term as a vector: resolve into components, add, and recombine. Two cars, A heading east at 60 km/h and B north at 80 km/h, give v_{B/A} = v_B − v_A with magnitude √(60² + 80²) = 100 km/h, directed northwest relative to A. Distractor answers usually add the speeds arithmetically (140) — always go through components.
Position-dependent acceleration and dependent motion
When acceleration varies, do not reach for the constant-a equations. If a = f(t), integrate a dt to get velocity and again for position. If a = f(s) (acceleration depends on position, as in a spring or magnetic field), use the chain-rule form a ds = v dv, then integrate: ∫a ds = ∫v dv = ½v² + C. This separates the variables cleanly and is the only correct path when, for example, a = −kx (which integrates to the simple-harmonic v–x relation). Recognizing which integration applies is itself a tested skill.
Dependent (constrained) motion appears in pulley problems: the total length of an inextensible cable is constant, so the displacements of the connected blocks are linked. Differentiating the length constraint relates their velocities and accelerations. In a single fixed-and-movable pulley system where one block descends, the supported block may move at half the speed and half the acceleration — write the cable-length equation, differentiate twice, and the ratios fall out automatically rather than from guessing.
Rotating frames and the polar description
For a particle on a rotating arm, polar (r-θ) coordinates capture both radial and transverse effects. The Handbook gives a_r = r̈ − rθ̇² (the second term is the centripetal contribution) and a_θ = rθ̈ + 2ṙθ̇ (the 2ṙθ̇ term is the Coriolis acceleration that appears whenever a particle moves radially in a rotating frame). A bead sliding outward on a spinning rod feels a Coriolis component even though it moves in a straight line along the rod. Recognizing that a uniformly rotating arm (θ̇ constant, r constant) reduces to pure centripetal acceleration rθ̇² toward the center keeps these problems quick.
Always state your coordinate frame first — mixing rectangular and polar terms is a leading cause of wrong dynamics answers.