Study guide
Mechanics of Materials: Stress, Strain, and Torsion
FE Mechanical Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 FE Mechanical Exam Map, Handbook, and Strategy
1.1 Official NCEES FE Mechanical Facts 1.2 Scoring, Attempts, Fees, and State Board Context 1.3 Reference Handbook Search, Units, and Calculator Workflow 1.4 Official Content Specification and Study Allocation 1.5 Pacing, Flagging, and Error Classification 1.6 How FE Mechanical Questions Test Model Selection
2 Math, Economics, Ethics, and Tools
Calculus, Differential Equations, and Linear Algebra Review Numerical Methods, Vectors, and Engineering Models Probability, Statistics, and Uncertainty Engineering Economics, Cash Flow, and Decision Methods Ethics, Professional Practice, and Public Welfare Calculator Workflows, Algebra, and Unit Checks
3 Mechanics Core
Statics: Free-Body Diagrams and Equilibrium Trusses, Frames, Centroids, and Friction Dynamics: Kinematics, Newton's Laws, and Relative Motion Work, Energy, Impulse, Momentum, Rotation, and Vibration Mechanics of Materials: Stress, Strain, and Torsion Beams, Deflection, Columns, Mohr's Circle, and Combined Loading
4 Thermal-Fluids Core
Fluid Properties, Statics, and Dimensional Analysis Bernoulli, Energy Equation, Pipe Losses, and Pumps Momentum Control Volumes and Turbomachinery Thermodynamic Properties, Energy Balances, and Ideal Gases Power, Refrigeration Cycles, Psychrometrics, and Second Law Heat Transfer: Conduction, Convection, Radiation, and Heat Exchangers
5 Systems, Design, and Final Readiness
5.1 Materials Processing, Failure, and Selection 5.2 Measurements, Instrumentation, Sensors, Circuits, and Uncertainty 5.3 Controls, Transfer Functions, Response, and Feedback 5.4 Mechanical Design: Shafts, Bearings, Gears, Springs, and Fasteners 5.5 Pressure Vessels, Welds, Fatigue, GD&T, and Design Safety 5.6 Final Mixed Practice, Readiness, and Exam-Day Plan
6 Integrated FE Mechanical Practice
Mixed Mechanics and Materials Practice Thermal-Fluid Design and Energy Cases Controls, Instrumentation, and Uncertainty Cases Mechanical Design Failure Mode Cases Full-Exam Simulation, Review, and Remediation Last-Week Handbook, Units, and Calculator Drills
Mechanics of Materials: Stress, Strain, and Torsion
Key Takeaways Explain This Topic AI
Axial stress σ = P/A; axial strain ε = δ/L; Hooke's law σ = Eε.
Axial deformation δ = PL/(AE); thermal strain ε_T = αΔT (no stress if free to expand).
Poisson's ratio ν relates lateral to axial strain; for metals ν ≈ 0.3.
Torsion: τ = Tr/J and twist φ = TL/(JG); for a solid shaft J = πd⁴/32.
Shear modulus G = E / [2(1 + ν)] ties the three elastic constants together.
Last updated: June 2026
Axial stress, strain, and Hooke's law
Normal (axial) stress is force per unit area over the resisting cross-section: σ = P A \sigma = \frac{P}{A} σ = A P
Normal strain is the fractional change in length, ε = δ/L (dimensionless). In the linear-elastic range these obey Hooke's law : σ = E ε \sigma = E\,\varepsilon σ = E ε
where E is the modulus of elasticity (Young's modulus). For structural steel E ≈ 200 GPa (29×10⁶ psi); aluminum ≈ 70 GPa. Worked example: a 12 mm diameter steel rod (A = π(0.012)²/4 = 1.131×10⁻⁴ m²) carries 20 kN. σ = 20 000/1.131×10⁻⁴ = 177 MPa. Strain ε = σ/E = 177×10⁶/200×10⁹ = 8.85×10⁻⁴. Over a 2 m length, δ = εL = 1.77 mm, which also follows from δ = PL/(AE).
The stress-strain diagram
A tensile test traces the material's signature curve, and FE questions probe its named points:
- Point/region Meaning
- Proportional limit Highest stress where σ = Eε holds (line is straight)
- Elastic limit Highest stress with full recovery on unloading
- Yield strength S_y Onset of permanent (plastic) strain; 0.2% offset for metals without a clear yield
- Ultimate strength S_u Peak stress the specimen carries
- Fracture Specimen separates
The slope of the initial straight line is E. The area under the whole curve up to fracture is the modulus of toughness (energy absorbed); the area under the elastic portion is the modulus of resilience . Ductile materials (mild steel) show large plastic strain and necking; brittle materials (cast iron, ceramics) fracture with little warning near the proportional limit.
- Axial deformation and thermal effects
- For a prismatic bar, total elongation is δ = P L A E \delta = \frac{PL}{AE} δ = A E P L
Stiffness AE/L behaves like a spring constant. Thermal strain from a temperature change is ε_T = αΔT, where α is the coefficient of thermal expansion (steel ≈ 12×10⁻⁶ /°C). A bar free to expand develops strain but no stress . If both ends are fixed so it cannot lengthen, the prevented strain produces thermal stress σ = EαΔT. A fully restrained steel bar heated 50°C carries σ = (200×10⁹)(12×10⁻⁶)(50) = 120 MPa compression — large enough to matter even without any mechanical load.
Poisson's ratio and elastic-constant relations
When a bar stretches axially it contracts laterally. Poisson's ratio is the magnitude of that coupling: ν = − ε l a t e r a l ε a x i a l \nu = -\frac{\varepsilon_{lateral}}{\varepsilon_{axial}} ν = − ε a x ia l ε l a t er a l
Most metals have ν ≈ 0.3; the thermodynamic upper bound is 0.5 (incompressible). The three isotropic elastic constants are not independent — the Handbook gives G = E 2 ( 1 + ν ) G = \frac{E}{2(1+\nu)} G = 2 ( 1 + ν ) E
so for steel G = 200/(2·1.3) = 76.9 GPa. The bulk modulus follows from K = E/[3(1 − 2ν)].
Torsion of circular shafts
A torque T twisting a circular shaft produces shear stress that varies linearly from zero at the center to a maximum at the surface: τ = T r J , τ m a x = T R J \tau = \frac{T r}{J}, \qquad \tau_{max} = \frac{T R}{J} τ = J T r , τ ma x = J TR
where J is the polar moment of inertia : J = πd⁴/32 for a solid shaft, J = π(d_o⁴ − d_i⁴)/32 for a hollow one. The angle of twist over length L is ϕ = T L J G \phi = \frac{TL}{JG} ϕ = J G T L
Worked example: a solid 40 mm diameter steel shaft (J = π(0.040)⁴/32 = 2.51×10⁻⁷ m⁴, G = 80 GPa) carries 500 N·m. Surface stress τ = TR/J = 500(0.020)/2.51×10⁻⁷ = 39.8 MPa. Over 1.5 m, twist φ = TL/(JG) = 500(1.5)/(2.51×10⁻⁷·80×10⁹) = 0.0373 rad = 2.14°. Power transmitted by a rotating shaft is P = Tω, a common combined torsion question: a shaft at 1800 rpm (ω = 188.5 rad/s) delivering 50 kW carries T = P/ω = 50 000/188.5 = 265 N·m. Hollow shafts give nearly the same strength at less weight because material near the center carries little shear stress.
Factor of safety and allowable stress
Design rarely loads a part to failure. The factor of safety is FS = S_y/σ_allow (or S_u/σ_allow for brittle materials), so a steel part (S_y = 250 MPa) designed to FS = 2 may see at most 125 MPa working stress. FE problems run this both ways: given a load and required FS, size the area (A ≥ FS·P/S_y); or given dimensions, report the resulting FS. Always match the strength basis (yield for ductile, ultimate for brittle) to the material.
Thin-walled pressure vessels
A cylindrical thin-walled pressure vessel (wall thickness t much less than radius r) carries two membrane stresses from internal pressure p. The hoop (circumferential) stress is σ_h = pr/t and the longitudinal (axial) stress is σ_l = pr/(2t) — hoop is exactly twice longitudinal, which is why cylindrical tanks split along a longitudinal seam. A spherical vessel carries σ = pr/(2t) in every direction. Worked example: a pipe with r = 0.3 m, t = 6 mm, p = 2 MPa gives σ_h = 2(0.3)/0.006 = 100 MPa and σ_l = 50 MPa. These are the σ_x and σ_y that feed directly into a Mohr's-circle or failure-theory check.
Shear and bearing connections
Bolted and riveted joints introduce two extra stress checks. Direct (average) shear on a pin or bolt is τ = V/A, where A is the bolt cross-section (πd²/4); double shear doubles the area. Bearing stress is the contact pressure σ_b = P/(t·d), using the projected area of the hole (plate thickness × bolt diameter). For example, a 20 mm bolt bearing P = 30 kN on an 8 mm plate gives σ_b = 30000/(0.008 × 0.020) = 188 MPa. FE connection problems ask you to find which mode — bolt shear, bearing, or plate tension on the net section — governs by comparing each against its allowable, the lowest capacity controlling the joint.