Study guide
Work, Energy, Impulse, Momentum, Rotation, and Vibration
FE Mechanical Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 FE Mechanical Exam Map, Handbook, and Strategy
1.1 Official NCEES FE Mechanical Facts 1.2 Scoring, Attempts, Fees, and State Board Context 1.3 Reference Handbook Search, Units, and Calculator Workflow 1.4 Official Content Specification and Study Allocation 1.5 Pacing, Flagging, and Error Classification 1.6 How FE Mechanical Questions Test Model Selection
2 Math, Economics, Ethics, and Tools
Calculus, Differential Equations, and Linear Algebra Review Numerical Methods, Vectors, and Engineering Models Probability, Statistics, and Uncertainty Engineering Economics, Cash Flow, and Decision Methods Ethics, Professional Practice, and Public Welfare Calculator Workflows, Algebra, and Unit Checks
3 Mechanics Core
Statics: Free-Body Diagrams and Equilibrium Trusses, Frames, Centroids, and Friction Dynamics: Kinematics, Newton's Laws, and Relative Motion Work, Energy, Impulse, Momentum, Rotation, and Vibration Mechanics of Materials: Stress, Strain, and Torsion Beams, Deflection, Columns, Mohr's Circle, and Combined Loading
4 Thermal-Fluids Core
Fluid Properties, Statics, and Dimensional Analysis Bernoulli, Energy Equation, Pipe Losses, and Pumps Momentum Control Volumes and Turbomachinery Thermodynamic Properties, Energy Balances, and Ideal Gases Power, Refrigeration Cycles, Psychrometrics, and Second Law Heat Transfer: Conduction, Convection, Radiation, and Heat Exchangers
5 Systems, Design, and Final Readiness
5.1 Materials Processing, Failure, and Selection 5.2 Measurements, Instrumentation, Sensors, Circuits, and Uncertainty 5.3 Controls, Transfer Functions, Response, and Feedback 5.4 Mechanical Design: Shafts, Bearings, Gears, Springs, and Fasteners 5.5 Pressure Vessels, Welds, Fatigue, GD&T, and Design Safety 5.6 Final Mixed Practice, Readiness, and Exam-Day Plan
6 Integrated FE Mechanical Practice
Mixed Mechanics and Materials Practice Thermal-Fluid Design and Energy Cases Controls, Instrumentation, and Uncertainty Cases Mechanical Design Failure Mode Cases Full-Exam Simulation, Review, and Remediation Last-Week Handbook, Units, and Calculator Drills
Work, Energy, Impulse, Momentum, Rotation, and Vibration
Key Takeaways Explain This Topic AI
Work-energy: U = ΔKE; kinetic energy is ½mv² (translation) plus ½Iω² (rotation).
Impulse-momentum: ∫F dt = m Δv; linear and angular momentum are conserved when external impulse is zero.
Coefficient of restitution e = (v'_B − v'_A)/(v_A − v_B); e = 1 elastic, e = 0 perfectly plastic.
Rotation: ΣM = Iα; rolling without slip gives v = rω and a = rα.
Undamped natural frequency: ω_n = √(k/m); pendulum ω_n = √(g/L).
Last updated: June 2026
Work-energy method
The work-energy theorem equates the net work done on a body to its change in kinetic energy: U 1 → 2 = Δ K E = 1 2 m v 2 2 − 1 2 m v 1 2 U_{1\to2} = \Delta KE = \tfrac{1}{2}mv_2^2 - \tfrac{1}{2}mv_1^2 U 1 → 2 = Δ K E = 2 1 m v 2 2 − 2 1 m v 1 2
This is the fastest tool whenever force acts over a distance and you do not need time. Work of a constant force is F·d (along the displacement); spring work is ½k(x₁² − x₂²); gravity work is −WΔh (or +Wh on the way down). When only conservative forces (gravity, springs) act, mechanical energy is conserved: KE₁ + PE₁ = KE₂ + PE₂.
Worked example: a 2 kg block slides from rest down a frictionless 5 m incline at 30°. Drop height h = 5 sin30° = 2.5 m. Energy conservation: ½mv² = mgh → v = √(2gh) = √(2·9.81·2.5) = 7.0 m/s. Add kinetic friction μ_k = 0.20: friction force = μ_k mg cos30° = 0.20(2)(9.81)(0.866) = 3.40 N; friction work = −3.40(5) = −17.0 J. Then ½(2)v² = mgh − 17.0 = 49.05 − 17.0 = 32.0 J → v = 5.66 m/s.
Impulse-momentum and impact
The impulse-momentum principle integrates Newton's law over time: ∫ F d t = m v 2 − m v 1 \int F\,dt = m v_2 - m v_1 ∫ F d t = m v 2 − m v 1
When no external impulse acts on a system, linear momentum is conserved — the basis of collision problems. For two colliding bodies, momentum conservation gives one equation; the coefficient of restitution supplies the second: ≠ = v B ′ − v A ′ v A − v B \ne = \frac{v'_B - v'_A}{v_A - v_B} = = v A − v B v B ′ − v A ′
with e = 1 for a perfectly elastic impact (kinetic energy conserved) and e = 0 for a perfectly plastic impact (bodies move together). A 3 kg cart at 4 m/s strikes a stationary 1 kg cart and they couple (e = 0): common velocity = (3·4)/(3+1) = 3 m/s. The kinetic energy lost = ½(3)(16) − ½(4)(9) = 24 − 18 = 6 J, dissipated in the coupling.
Rigid-body rotation
For rotation about a fixed axis, the angular analog of Newton's law is ΣM = Iα , where I is the mass moment of inertia and α the angular acceleration. Rotational kinetic energy is ½Iω², and angular work-energy and angular impulse-momentum (∫M dt = I Δω) mirror their linear forms. For a body rolling without slipping , the contact-point constraint gives v = rω and a = rα, linking translation and rotation.
- Quantity Translation Rotation
- Inertia mass m moment of inertia I
- Newton's law ΣF = ma ΣM = Iα
- Kinetic energy ½mv² ½Iω²
- Momentum mv Iω
General plane motion combines both: total KE = ½mv_G² + ½I_G ω². A solid cylinder (I = ½mr²) rolling down an incline has acceleration a = g sinθ / (1 + I/mr²) = g sinθ/(1.5) = ⅔ g sinθ — less than a frictionless sliding block because energy also spins it up.
Single-degree-of-freedom vibration
Free undamped vibration of a mass-spring system obeys mẍ + kx = 0, giving simple harmonic motion at the natural frequency : ω n = k m ( rad/s ) , f n = ω n 2 π , T = 1 f n \omega_n = \sqrt{\frac{k}{m}} \;(\text{rad/s}), \qquad f_n = \frac{\omega_n}{2\pi}, \qquad T = \frac{1}{f_n} ω n = m k ( rad/s ) , f n = 2 π ω n , T = f n 1
A simple pendulum has ω_n = √(g/L); note mass cancels. Worked example: m = 4 kg on k = 1600 N/m gives ω_n = √(1600/4) = 20 rad/s, f_n = 20/2π = 3.18 Hz, period T = 0.314 s. Adding viscous damping introduces ζ = c/(2√(km)); ζ < 1 is underdamped (oscillates and decays), ζ = 1 critically damped (fastest no-overshoot return), ζ > 1 overdamped. The damped frequency ω_d = ω_n√(1 − ζ²) is slightly below ω_n.
Power, efficiency, and conservative-force traps
Power is the time rate of doing work, P = dU/dt = F·v for a force moving at velocity v, or P = Tω for a torque on a rotating shaft. A 1200 N tractive force at 25 m/s delivers P = 30 000 W = 30 kW. Mechanical efficiency η = P_out/P_in is always less than one; friction and other losses make up the difference, and the work-energy bookkeeping must include that lost work as a negative term. A common FE trap is to apply energy conservation when friction is present — friction is non-conservative , so use the general form U_external + U_friction = ΔKE, never the conservative KE + PE balance, unless the surface is explicitly frictionless.
Angular momentum and gyroscopic intuition
The angular-momentum principle, ∫M dt = ΔH where H = Iω, governs spinning bodies and is conserved when net external moment is zero. A skater pulling in her arms reduces I, so ω rises to keep Iω constant — a direct conservation-of-angular-momentum result that occasionally appears in FE qualitative items. For a rigid body, H about its mass center is I_G ω.
Mass moment of inertia reference values
Rotational problems require the correct I; the Handbook tabulates the standard ones (axis through the mass center unless noted):
- Body Moment of inertia I
- Slender rod, length L, about center (1/12) m L²
- Slender rod, about one end (1/3) m L²
- Solid disk/cylinder, radius r (1/2) m r²
- Thin ring/hoop, radius r m r²
- Solid sphere, radius r (2/5) m r²
Use the parallel-axis theorem I = I_G + m d² to shift to an off-center axis — a rod swinging about its end has (1/12)mL² + m(L/2)² = (1/3)mL², which is also the pendulum result. Picking the wrong axis (center vs end) is the most frequent rotation error, so confirm where the rotation axis actually is before selecting a formula.