Study guide

Bernoulli, Energy Equation, Pipe Losses, and Pumps

FE Mechanical Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 FE Mechanical Exam Map, Handbook, and Strategy

1.1 Official NCEES FE Mechanical Facts 1.2 Scoring, Attempts, Fees, and State Board Context 1.3 Reference Handbook Search, Units, and Calculator Workflow 1.4 Official Content Specification and Study Allocation 1.5 Pacing, Flagging, and Error Classification 1.6 How FE Mechanical Questions Test Model Selection

2 Math, Economics, Ethics, and Tools

Calculus, Differential Equations, and Linear Algebra Review Numerical Methods, Vectors, and Engineering Models Probability, Statistics, and Uncertainty Engineering Economics, Cash Flow, and Decision Methods Ethics, Professional Practice, and Public Welfare Calculator Workflows, Algebra, and Unit Checks

3 Mechanics Core

Statics: Free-Body Diagrams and Equilibrium Trusses, Frames, Centroids, and Friction Dynamics: Kinematics, Newton's Laws, and Relative Motion Work, Energy, Impulse, Momentum, Rotation, and Vibration Mechanics of Materials: Stress, Strain, and Torsion Beams, Deflection, Columns, Mohr's Circle, and Combined Loading

4 Thermal-Fluids Core

Fluid Properties, Statics, and Dimensional Analysis Bernoulli, Energy Equation, Pipe Losses, and Pumps Momentum Control Volumes and Turbomachinery Thermodynamic Properties, Energy Balances, and Ideal Gases Power, Refrigeration Cycles, Psychrometrics, and Second Law Heat Transfer: Conduction, Convection, Radiation, and Heat Exchangers

5 Systems, Design, and Final Readiness

5.1 Materials Processing, Failure, and Selection 5.2 Measurements, Instrumentation, Sensors, Circuits, and Uncertainty 5.3 Controls, Transfer Functions, Response, and Feedback 5.4 Mechanical Design: Shafts, Bearings, Gears, Springs, and Fasteners 5.5 Pressure Vessels, Welds, Fatigue, GD&T, and Design Safety 5.6 Final Mixed Practice, Readiness, and Exam-Day Plan

6 Integrated FE Mechanical Practice

Mixed Mechanics and Materials Practice Thermal-Fluid Design and Energy Cases Controls, Instrumentation, and Uncertainty Cases Mechanical Design Failure Mode Cases Full-Exam Simulation, Review, and Remediation Last-Week Handbook, Units, and Calculator Drills

Bernoulli, Energy Equation, Pipe Losses, and Pumps

Key Takeaways Explain This Topic AI

Use simple Bernoulli only when flow is steady, incompressible, along a streamline, and losses or shaft devices are negligible.

Use the mechanical energy equation when a problem includes pump head, turbine head, head loss, pressure change, velocity change, or elevation change.

Pipe-loss problems use Darcy-Weisbach h_f = f(L/D)(V²/2g) with the Darcy friction factor read from the Moody chart.

Laminar friction factor is f = 64/Re; turbulent f comes from Colebrook or the Moody chart using relative roughness ε/D.

Minor losses h_m = K(V²/2g) scale with velocity head and can dominate short systems with valves, elbows, entrances, and exits.

Pump hydraulic power is W = γQh_p; brake (motor) power = hydraulic power / efficiency, with efficiency applied in the correct direction.

Last updated: June 2026

Continuity and When Bernoulli Applies

Mass conservation for incompressible steady flow is continuity : ṁ = ρAV = constant, and for constant density Q = A₁V₁ = A₂V₂ . Halving the cross-sectional area doubles the velocity. Always solve continuity first — it links the velocities that the energy equation needs. For a circular pipe, A = πD²/4, so V scales with 1/D²: cutting the diameter in half quadruples the velocity.

Bernoulli's equation (per unit weight, in head form) is:

p₁/γ + V₁²/2g + z₁ = p₂/γ + V₂²/2g + z₂

Each term is a head with units of length: p/γ is pressure head , V²/2g is velocity head , and z is elevation head . Bernoulli simply says these three trade off along a streamline at constant total head. It is valid only for steady, incompressible, frictionless flow along a streamline with no pump or turbine. The instant a problem mentions friction, a long pipe, a valve, a fitting, or a pump/turbine, you must upgrade to the mechanical energy equation . A classic Bernoulli application is the Pitot tube : stagnation minus static pressure gives velocity, V = √(2(p_stag − p_static)/ρ).

The Mechanical Energy Equation

The full handbook form adds shaft work and losses to Bernoulli:

p₁/γ + V₁²/2g + z₁ + h_p = p₂/γ + V₂²/2g + z₂ + h_t + h_L

where h_p is pump head added (energy in), h_t is turbine head extracted (energy out), and h_L is total head loss (friction + fittings). This single equation handles almost every FE pipe problem; Bernoulli is just the special case with h_p = h_t = h_L = 0.

Strategy for setting up points 1 and 2: choose the two points where you know the most. Reservoir/tank surfaces are ideal because there p = 0 gauge and V ≈ 0 (large area). Free jet exits to atmosphere have p = 0 gauge. This zeroes terms and shrinks the algebra.

Worked example. Water flows from a large open reservoir through a pipe to a lower open outlet 30 m below, with 12 m of total head loss. Both surfaces are at atmospheric pressure with negligible reservoir velocity. The energy equation reduces to z₁ = V₂²/2g + z₂ + h_L, so V₂²/2g = (z₁ − z₂) − h_L = 30 − 12 = 18 m, giving V₂ = √(2 × 9.81 × 18) = 18.8 m/s . Without losses it would be √(2 × 9.81 × 30) = 24.3 m/s — friction costs ~5.5 m/s here.

Pipe Friction and the Moody Chart

Major (friction) loss uses Darcy-Weisbach :

h_f = f (L/D)(V²/2g)

The Darcy friction factor f depends on Reynolds number Re = ρVD/μ and relative roughness ε/D.

Laminar (Re < 2300): f = 64/Re exactly — no chart needed.

Turbulent (Re > 4000): read f from the Moody chart or solve the Colebrook equation using ε/D.

Worked example. Water (ν = 1.0 × 10⁻⁶ m²/s) flows at 1.5 m/s through a 0.05 m pipe, 100 m long. Re = VD/ν = 1.5 × 0.05 / 1.0e-6 = 75,000 (turbulent). For a smooth pipe, f ≈ 0.019. h_f = 0.019 × (100/0.05) × (1.5²/(2×9.81)) = 0.019 × 2000 × 0.115 = 4.4 m .

Minor losses add fittings: h_m = K(V²/2g), where K is a loss coefficient from the handbook. Typical K values: sharp entrance 0.5, exit 1.0, fully open gate valve 0.2, fully open globe valve ~10, 90° elbow 0.9. In short piping systems with several valves and fittings, minor losses can exceed the straight-pipe friction loss, so never assume they are negligible just because the name says "minor." Total loss is h_L = h_f + Σh_m. An equivalent-length method also exists: each fitting is replaced by L_eq/D of straight pipe, then folded into one Darcy-Weisbach term — handy when a single friction factor covers the whole line.

Pump Power, Efficiency, and NPSH

The hydraulic (water) power delivered to the fluid is:

W_hydraulic = γ Q h_p = ρ g Q h_p

The brake power the motor must supply accounts for pump efficiency η_p: W_brake = W_hydraulic / η_p . Efficiency always increases the required input — if your brake power came out smaller than hydraulic power, you divided the wrong way.

Worked example. A pump delivers Q = 0.05 m³/s at h_p = 40 m with η_p = 0.75. Hydraulic power = 9810 × 0.05 × 40 = 19,620 W ≈ 19.6 kW. Brake power = 19.6 / 0.75 = 26.2 kW .

NPSH (Net Positive Suction Head) is a cavitation question, not a power question. Available NPSH must exceed required NPSH (NPSH_avail > NPSH_req) or the local pressure at the impeller eye drops to the fluid's vapor pressure, vapor bubbles form, and they collapse violently — eroding the impeller and choking flow. NPSH_avail = (p_atm − p_vapor)/γ − z_suction − h_L,suction. Raising the pump above the supply (large positive suction lift z_suction), high suction-line losses, or hot/volatile liquid (high p_vapor) all reduce NPSH_avail and invite cavitation. The fix is to lower the pump, shorten/enlarge the suction line, or cool the fluid.

  • Term Formula Use
  • Major loss f(L/D)(V²/2g) long pipe friction
  • Minor loss K(V²/2g) fittings/valves
  • Pump head added h_p energy equation
  • Hydraulic power γQh_p power to fluid