Study guide
Momentum Control Volumes and Turbomachinery
FE Mechanical Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 FE Mechanical Exam Map, Handbook, and Strategy
1.1 Official NCEES FE Mechanical Facts 1.2 Scoring, Attempts, Fees, and State Board Context 1.3 Reference Handbook Search, Units, and Calculator Workflow 1.4 Official Content Specification and Study Allocation 1.5 Pacing, Flagging, and Error Classification 1.6 How FE Mechanical Questions Test Model Selection
2 Math, Economics, Ethics, and Tools
Calculus, Differential Equations, and Linear Algebra Review Numerical Methods, Vectors, and Engineering Models Probability, Statistics, and Uncertainty Engineering Economics, Cash Flow, and Decision Methods Ethics, Professional Practice, and Public Welfare Calculator Workflows, Algebra, and Unit Checks
3 Mechanics Core
Statics: Free-Body Diagrams and Equilibrium Trusses, Frames, Centroids, and Friction Dynamics: Kinematics, Newton's Laws, and Relative Motion Work, Energy, Impulse, Momentum, Rotation, and Vibration Mechanics of Materials: Stress, Strain, and Torsion Beams, Deflection, Columns, Mohr's Circle, and Combined Loading
4 Thermal-Fluids Core
Fluid Properties, Statics, and Dimensional Analysis Bernoulli, Energy Equation, Pipe Losses, and Pumps Momentum Control Volumes and Turbomachinery Thermodynamic Properties, Energy Balances, and Ideal Gases Power, Refrigeration Cycles, Psychrometrics, and Second Law Heat Transfer: Conduction, Convection, Radiation, and Heat Exchangers
5 Systems, Design, and Final Readiness
5.1 Materials Processing, Failure, and Selection 5.2 Measurements, Instrumentation, Sensors, Circuits, and Uncertainty 5.3 Controls, Transfer Functions, Response, and Feedback 5.4 Mechanical Design: Shafts, Bearings, Gears, Springs, and Fasteners 5.5 Pressure Vessels, Welds, Fatigue, GD&T, and Design Safety 5.6 Final Mixed Practice, Readiness, and Exam-Day Plan
6 Integrated FE Mechanical Practice
Mixed Mechanics and Materials Practice Thermal-Fluid Design and Energy Cases Controls, Instrumentation, and Uncertainty Cases Mechanical Design Failure Mode Cases Full-Exam Simulation, Review, and Remediation Last-Week Handbook, Units, and Calculator Drills
Momentum Control Volumes and Turbomachinery
Key Takeaways Explain This Topic AI
Use the linear momentum equation ΣF = ṁ(V_out − V_in) when a problem asks for force from a change in flow direction or speed.
Momentum is vector-based, so x and y components must be written separately before combining into a resultant.
Pressure forces belong on the control surface unless the flow exits to atmosphere, where gauge pressure is zero at that boundary.
Mass flow rate is ṁ = ρQ = ρAV; using volume flow rate directly in momentum equations is a frequent FE error.
Turbomachinery questions use head, flow rate, speed, efficiency, and the affinity laws rather than detailed blade design.
Specific speed N_s groups speed, flow, and head to classify pumps as radial, mixed, or axial flow.
Last updated: June 2026
The Linear Momentum Equation
The FE tests a clean division of labor: use the energy equation for heads, velocities, and power, but use the momentum equation whenever a question asks for a force — the reaction on a pipe bend, the thrust of a jet, the force on a deflecting vane, the anchor force on a nozzle. For steady flow through a control volume:
ΣF = ṁ(V_out − V_in) = ṁ ΔV
where ṁ = ρQ = ρAV is the mass flow rate. The sum of forces on the control volume includes pressure forces on the inlet/outlet faces (p·A acting inward on each face), the support/anchor reaction , and gravity/weight if relevant. Because momentum is a vector , you must split into components and solve each axis independently:
- ΣF_x = ṁ(V_2x − V_1x)
- ΣF_y = ṁ(V_2y − V_1y)
Set a consistent sign convention (e.g., right and up positive), track the signed velocity components, then combine: F_R = √(F_x² + F_y²) with direction θ = arctan(F_y/F_x). The single most common error is using volume flow Q where ṁ = ρQ is required; the second is dropping the inlet pressure force when inlet pressure is gauge-nonzero.
Worked Example — Reducing Elbow
Water (ρ = 1000 kg/m³) flows through a 90° elbow. Inlet: V₁ = 4 m/s, A₁ = 0.02 m², gauge pressure p₁ = 200 kPa, flow in +x. Outlet: discharges to atmosphere (p₂ = 0 gauge) in +y, with V₂ = 8 m/s (smaller exit area).
Mass flow: ṁ = ρA₁V₁ = 1000 × 0.02 × 4 = 80 kg/s.
x-momentum: p₁A₁ + R_x = ṁ(0 − V₁). p₁A₁ = 200,000 × 0.02 = 4000 N. So R_x = ṁ(−V₁) − p₁A₁ = 80(−4) − 4000 = −4320 N (the support pushes in −x).
y-momentum: R_y = ṁ(V₂ − 0) = 80 × 8 = 640 N .
Resultant anchor force: F_R = √(4320² + 640²) ≈ 4367 N . Note the pressure term dominates here — never drop it when inlet pressure is gauge-nonzero.
Jets, Vanes, and Thrust
A free jet striking a stationary flat plate normal to the flow exerts F = ṁV = ρAV². For a jet turned through angle θ by a vane , the force components follow directly from the inlet/outlet velocity components. A jet reversed 180° by a curved vane delivers F = ṁ(V − (−V)) = 2ṁV — twice the force of a flat plate, a classic FE distinction.
For a moving vane (turbine blade), the relative velocity (V − u) replaces V, where u is the blade speed, and the effective mass flow is ρA(V − u). Power extracted = F × u, and it is maximized when u = V/2 for a single moving plate.
Rocket/jet thrust: Thrust = ṁ_exit V_exit + (p_exit − p_atm)A_exit. The momentum-flux term ṁV usually dominates; the pressure term matters only for under- or over-expanded nozzles.
Worked example — flat plate. A 25 mm-diameter water jet at 15 m/s hits a stationary plate normal to flow. A = π(0.025)²/4 = 4.91 × 10⁻⁴ m². ṁ = ρAV = 1000 × 4.91e-4 × 15 = 7.36 kg/s. F = ṁV = 7.36 × 15 = 110 N .
- Target Deflection Force on target
- Flat plate ⊥ stationary jet 90° ṁV = ρAV²
- Vane turning jet 90° 90° ṁV per axis
- Vane reversing jet 180° 180° 2ṁV
- Moving plate (speed u) 90° ρA(V−u)²
Turbomachinery and the Affinity Laws
For pumps, fans, and turbines, the FE rarely asks blade geometry — it asks head, flow, power, efficiency , and scaling. The affinity laws relate performance of a single pump at different speeds N (or geometrically similar pumps at diameter ratio D):
Flow: Q₂/Q₁ = (N₂/N₁) — flow scales linearly with speed.
Head: h₂/h₁ = (N₂/N₁)² — head scales with speed squared.
Power: P₂/P₁ = (N₂/N₁)³ — power scales with speed cubed.
Worked example. A pump runs at 1750 rpm delivering Q = 0.10 m³/s, h = 25 m, P = 30 kW. Sped up to 2100 rpm (ratio 1.2): Q = 0.10 × 1.2 = 0.12 m³/s ; h = 25 × 1.2² = 36 m ; P = 30 × 1.2³ = 51.8 kW .
Specific speed N_s = N√Q/h^(3/4) classifies the impeller type independent of size. Low N_s indicates radial (centrifugal, high-head, low-flow) pumps; mid N_s indicates mixed-flow ; high N_s indicates axial (propeller, low-head, high-flow) pumps. It tells a designer which geometry suits a given duty.
Worked example — turbine power. Water (Q = 0.5 m³/s) drops through a net head of 60 m to a turbine with overall efficiency 0.85. Available hydraulic power = γQh = 9810 × 0.5 × 60 = 294 kW. Shaft power out = 294 × 0.85 = 250 kW . Note efficiency reduces output for a turbine but increases required input for a pump — the direction flips with the device.
Sign convention: a pump/fan adds head and power to the fluid (h_p positive in the energy equation); a turbine extracts it (h_t positive on the downstream side). Confusing the direction flips the entire energy balance and the efficiency placement.