Study guide
3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics
FE Other Disciplines Fundamentals of Engineering
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Strategy
About the FE Other Disciplines Exam How to Use This Study Guide
2 Chapter 1: Mathematics
1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration
3 Chapter 2: Probability and Statistics
2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression
4 Chapter 3: Chemistry
3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics
5 Chapter 4: Instrumentation and Controls
4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic
6 Chapter 5: Engineering Ethics and Societal Impacts
5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety
7 Chapter 6: Safety, Health, and Environment
6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates
8 Chapter 7: Engineering Economics
7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees
9 Chapter 8: Statics
8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c
10 Chapter 9: Dynamics
9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping
11 Chapter 10: Strength of Materials
10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria
12 Chapter 11: Materials
11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design
13 Chapter 12: Fluid Mechanics
12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law
14 Chapter 13: Basic Electrical Engineering
13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter
15 Chapter 14: Thermodynamics and Heat Transfer
14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart
3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics
Key Takeaways Explain This Topic AI
Oxidation involves the loss of electrons (increase in oxidation state), whereas reduction involves the gain of electrons (decrease in oxidation state).
Standard cell potential is E c e l l ∘ = E c a t h o d e ∘ − E a n o d e ∘ E^\circ_{cell} = E^\circ_{cathode} - E^\circ_{anode} E ce ll ∘ = E c a t h o d e ∘ − E an o d e ∘ , where positive E c e l l ∘ E^\circ_{cell} E ce ll ∘ indicates a spontaneous galvanic cell ( Δ G ∘ = − n F E c e l l ∘ < 0 \Delta G^\circ = -n F E^\circ_{cell} < 0 Δ G ∘ = − n F E ce ll ∘ < 0 ).
The Nernst equation calculates cell potential under non-standard concentrations: E = E ∘ − R T n F ln Q = E ∘ − 0.0592 n log 10 Q E = E^\circ - \frac{RT}{nF} \ln Q = E^\circ - \frac{0.0592}{n} \log_{10} Q E = E ∘ − n F RT ln Q = E ∘ − n 0.0592 lo g 10 Q at 298.15 K 298.15\text{ K} 298.15 K .
Faraday's Law of Electrolysis quantifies electrodeposited mass m = I ⋅ t ⋅ M n ⋅ F m = \frac{I \cdot t \cdot M}{n \cdot F} m = n ⋅ F I ⋅ t ⋅ M , linking current and time to stoichiometry.
Corrosion is an electrochemical process requiring an anode, cathode, electrolyte, and metallic path; mitigation includes cathodic protection and galvanization.
Last updated: August 2026
3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics
Electrochemistry governs critical engineering phenomena including battery operations, electroplating, sensor technology, fuel cells, and structural corrosion control. The FE Other Disciplines exam evaluates redox balancing, cell EMF, non-standard Nernst potentials, Faraday's electrolysis law, and corrosion mitigation techniques.
1. Oxidation States and Redox Reaction Fundamentals
An oxidation-reduction (redox) reaction involves the transfer of electrons between chemical species.
Definitions
Oxidation: Loss of electrons → \rightarrow → Oxidation state increases (becomes more positive).
Reduction: Gain of electrons → \rightarrow → Oxidation state decreases (becomes more negative).
Reducing Agent: The species that loses electrons (is oxidized) and reduces another species.
Oxidizing Agent: The species that gains electrons (is reduced) and oxidizes another species.
Mnemonic: OIL RIG — Oxidation Is Loss, Reduction Is Gain of electrons.
Rules for Assigning Oxidation Numbers
Free elements in uncombined states have an oxidation number of 0 0 0 (e.g., Fe ( s ) , O 2 ( g ) , H 2 ( g ) \text{Fe}(s), \text{O}_2(g), \text{H}_2(g) Fe ( s ) , O 2 ( g ) , H 2 ( g ) ).
Monatomic ions have an oxidation number equal to their ionic charge (e.g., Fe 3 + = + 3 \text{Fe}^{3+} = +3 Fe 3 + = + 3 , Cl − = − 1 \text{Cl}^- = -1 Cl − = − 1 ).
Fluorine is always − 1 -1 − 1 . Alkali metals (Group 1) are + 1 +1 + 1 ; Alkaline earth metals (Group 2) are + 2 +2 + 2 .
Hydrogen is + 1 +1 + 1 when bonded to nonmetals and − 1 -1 − 1 when bonded to metals (hydrides).
Oxygen is usually − 2 -2 − 2 (except in peroxides like H 2 O 2 \text{H}_2\text{O}_2 H 2 O 2 where it is − 1 -1 − 1 , or bound to fluorine).
The sum of oxidation numbers equals 0 0 0 for neutral molecules, or the net charge for polyatomic ions.
Balancing Redox Reactions (Half-Reaction Method)
To balance complex redox reactions in acidic solution:
Separate the overall reaction into oxidation and reduction half-reactions.
Balance all elements except H \text{H} H and O \text{O} O .
Balance O \text{O} O by adding H 2 O \text{H}_2\text{O} H 2 O .
Balance H \text{H} H by adding H + \text{H}^+ H + .
Balance charge by adding electrons ( e − e^- e − ).
Multiply half-reactions by integers so electrons lost equal electrons gained, then sum and simplify.
(For basic solutions: add OH − \text{OH}^- OH − to both sides equal to H + \text{H}^+ H + to form water and simplify).
2. Electrochemical Cells, Standard Potentials, and Nernst Equation
Electrochemical cells convert chemical energy into electrical energy (Galvanic/Voltaic cell) or use electrical energy to drive non-spontaneous reactions (Electrolytic cell).
Cell Components and Terminology
Anode: Electrode where oxidation occurs ( AN OX ). Electrons leave the cell from the anode.
Cathode: Electrode where reduction occurs ( RED CAT ). Electrons enter the cathode.
Salt Bridge: Maintains electrical neutrality by allowing ion migration between half-cells.
Standard Cell Potential ( E cell ∘ E^\circ_{\text{cell}} E cell ∘ )
Standard reduction potentials ( E ∘ E^\circ E ∘ ) are tabulated at 25 ∘ C 25^\circ\text{C} 2 5 ∘ C , 1 atm 1\text{ atm} 1 atm , and 1.0 M 1.0\text{ M} 1.0 M concentration relative to the Standard Hydrogen Electrode (SHE, E ∘ = 0.00 V E^\circ = 0.00\text{ V} E ∘ = 0.00 V ).
NCEES Formula: Standard Cell EMF E cell ∘ = E cathode ∘ − E anode ∘ E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} E cell ∘ = E cathode ∘ − E anode ∘
Relationship to Free Energy and Equilibrium
NCEES Formula: Gibbs Free Energy & Cell EMF Δ G ∘ = − n F E cell ∘ \Delta G^\circ = -n F E^\circ_{\text{cell}} Δ G ∘ = − n F E cell ∘ Δ G ∘ = − R T ln K \Delta G^\circ = -R T \ln K Δ G ∘ = − RT ln K
where:
n n n = number of moles of electrons transferred in balanced reaction
F F F = Faraday's constant ( 96 , 485 C/mol e − ≈ 96 , 500 J/(V ⋅ mol e − ) 96,485 \text{ C/mol e}^- \approx 96,500 \text{ J/(V}\cdot\text{mol e}^-) 96 , 485 C/mol e − ≈ 96 , 500 J/(V ⋅ mol e − ) )
Spontaneous Galvanic Cell: E cell ∘ > 0 ⟹ Δ G ∘ < 0 E^\circ_{\text{cell}} > 0 \implies \Delta G^\circ < 0 E cell ∘ > 0 ⟹ Δ G ∘ < 0 and K > 1 K > 1 K > 1 .
Non-spontaneous Electrolytic Cell: E cell ∘ < 0 ⟹ Δ G ∘ > 0 E^\circ_{\text{cell}} < 0 \implies \Delta G^\circ > 0 E cell ∘ < 0 ⟹ Δ G ∘ > 0 .
Nernst Equation for Non-Standard Concentrations
When species concentrations deviate from 1.0 M 1.0\text{ M} 1.0 M , cell potential is adjusted using the reaction quotient Q Q Q :
NCEES Formula: Nernst Equation E = E cell ∘ − R T n F ln Q E = E^\circ_{\text{cell}} - \frac{R T}{n F} \ln Q E = E cell ∘ − n F RT ln Q
At T = 298.15 K T = 298.15\text{ K} T = 298.15 K ( 25 ∘ C 25^\circ\text{C} 2 5 ∘ C ), substituting constants yields: E = E cell ∘ − 0.0592 n log 10 Q E = E^\circ_{\text{cell}} - \frac{0.0592}{n} \log_{10} Q E = E cell ∘ − n 0.0592 lo g 10 Q
Worked Engineering Example: Galvanic Cell and Nernst Potential
Problem: A galvanic cell operates at 25 ∘ C 25^\circ\text{C} 2 5 ∘ C with a zinc anode immersed in 0.010 M 0.010\text{ M} 0.010 M Zn 2 + \text{Zn}^{2+} Zn 2 + solution and a copper cathode immersed in 0.500 M 0.500\text{ M} 0.500 M Cu 2 + \text{Cu}^{2+} Cu 2 + solution. Standard reduction potentials are:
Cu 2 + ( a q ) + 2 e − → Cu ( s ) , E ∘ = + 0.337 V \text{Cu}^{2+}(aq) + 2 e^- \rightarrow \text{Cu}(s), \quad E^\circ = +0.337\text{ V} Cu 2 + ( a q ) + 2 e − → Cu ( s ) , E ∘ = + 0.337 V
Zn 2 + ( a q ) + 2 e − → Zn ( s ) , E ∘ = − 0.763 V \text{Zn}^{2+}(aq) + 2 e^- \rightarrow \text{Zn}(s), \quad E^\circ = -0.763\text{ V} Zn 2 + ( a q ) + 2 e − → Zn ( s ) , E ∘ = − 0.763 V
Calculate the standard cell potential ( E cell ∘ E^\circ_{\text{cell}} E cell ∘ ).
Determine the non-standard cell potential ( E E E ) using the Nernst equation.
Solution:
Step 1: Calculate E cell ∘ E^\circ_{\text{cell}} E cell ∘ : Copper has a higher reduction potential, so it undergoes reduction at the cathode. Zinc undergoes oxidation at the anode. E cell ∘ = E cathode ∘ − E anode ∘ = + 0.337 V − ( − 0.763 V ) = + 1.100 V E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = +0.337\text{ V} - (-0.763\text{ V}) = +1.100\text{ V} E cell ∘ = E cathode ∘ − E anode ∘ = + 0.337 V − ( − 0.763 V ) = + 1.100 V
Step 2: Formulate overall reaction and evaluate Q Q Q : Overall cell reaction: Zn ( s ) + Cu 2 + ( a q ) ⇌ Zn 2 + ( a q ) + Cu ( s ) \text{Zn}(s) + \text{Cu}^{2+}(aq) \rightleftharpoons \text{Zn}^{2+}(aq) + \text{Cu}(s) Zn ( s ) + Cu 2 + ( a q ) ⇌ Zn 2 + ( a q ) + Cu ( s ) ( n = 2 mol e − n = 2\text{ mol e}^- n = 2 mol e − ) Q = [ Zn 2 + ] [ Cu 2 + ] = 0.010 M 0.500 M = 0.020 Q = \frac{[\text{Zn}^{2+}]}{[\text{Cu}^{2+}]} = \frac{0.010\text{ M}}{0.500\text{ M}} = 0.020 Q = [ Cu 2 + ] [ Zn 2 + ] = 0.500 M 0.010 M = 0.020
Step 3: Apply Nernst Equation: E = E cell ∘ − 0.0592 n log 10 Q E = E^\circ_{\text{cell}} - \frac{0.0592}{n} \log_{10} Q E = E cell ∘ − n 0.0592 lo g 10 Q E = 1.100 − 0.0592 2 log 10 ( 0.020 ) E = 1.100 - \frac{0.0592}{2} \log_{10}(0.020) E = 1.100 − 2 0.0592 lo g 10 ( 0.020 ) log 10 ( 0.020 ) = − 1.6990 \log_{10}(0.020) = -1.6990 lo g 10 ( 0.020 ) = − 1.6990 E = 1.100 − ( 0.0296 ) × ( − 1.6990 ) = 1.100 + 0.0503 = 1.1503 V ≈ 1.15 V E = 1.100 - (0.0296) \times (-1.6990) = 1.100 + 0.0503 = 1.1503\text{ V} \approx 1.15\text{ V} E = 1.100 − ( 0.0296 ) × ( − 1.6990 ) = 1.100 + 0.0503 = 1.1503 V ≈ 1.15 V Conclusion: Lowering anode concentration [ Zn 2 + ] [\text{Zn}^{2+}] [ Zn 2 + ] relative to cathode concentration [ Cu 2 + ] [\text{Cu}^{2+}] [ Cu 2 + ] increases cell voltage from 1.10 V 1.10\text{ V} 1.10 V to 1.15 V 1.15\text{ V} 1.15 V by shifting thermodynamic equilibrium forward.
Loading diagram... Galvanic Electrochemical Cell Electron and Ion Flow
3. Faraday's Law of Electrolysis and Corrosion Protection
Electrochemistry enables quantitative plating analysis and dictates structural degradation mechanisms.
Faraday's Law of Electrolysis
Faraday's Law dictates that the mass of substance deposited or liberated at an electrode during electrolysis is directly proportional to the total electric charge passed through the cell.
NCEES Formula: Electrodeposited Mass m = I ⋅ t ⋅ M n ⋅ F or Q charge = I ⋅ t m = \frac{I \cdot t \cdot M}{n \cdot F} \quad \text{or} \quad Q_{\text{charge}} = I \cdot t m = n ⋅ F I ⋅ t ⋅ M or Q charge = I ⋅ t
where:
- m m m = mass of electrodeposited substance (grams, g \text{g} g )
- I I I = electric current (amperes, A = C/s \text{A} = \text{C/s} A = C/s )
- t t t = time elapsed (seconds, s \text{s} s )
- M M M = molar mass of species ( g/mol \text{g/mol} g/mol )
- n n n = moles of electrons transferred per mole of ion ( e − / ion e^-/\text{ion} e − / ion )
- F F F = Faraday's constant ( 96 , 485 C/mol e − 96,485 \text{ C/mol e}^- 96 , 485 C/mol e − )
- Worked Engineering Example: Industrial Electroplating Mass Calculation
Problem: An industrial electroplating bath plates nickel metal onto structural steel components using a current of 25.0 A 25.0\text{ A} 25.0 A passed for 3.00 hours 3.00\text{ hours} 3.00 hours . The nickel electrolyte contains Ni 2 + \text{Ni}^{2+} Ni 2 + ions ( M = 58.69 g/mol M = 58.69\text{ g/mol} M = 58.69 g/mol ). Calculate the total mass of nickel deposited.
Solution:
Step 1: Convert time to seconds: t = 3.00 hours × 3600 s/hour = 10 , 800 s t = 3.00\text{ hours} \times 3600\text{ s/hour} = 10,800\text{ s} t = 3.00 hours × 3600 s/hour = 10 , 800 s
Step 2: Compute total electrical charge ( Q Q Q ): Q charge = I ⋅ t = 25.0 A × 10 , 800 s = 270 , 000 C Q_{\text{charge}} = I \cdot t = 25.0\text{ A} \times 10,800\text{ s} = 270,000\text{ C} Q charge = I ⋅ t = 25.0 A × 10 , 800 s = 270 , 000 C
Step 3: Apply Faraday's Law ( n = 2 n = 2 n = 2 for Ni 2 + \text{Ni}^{2+} Ni 2 + ): m = Q charge ⋅ M n ⋅ F = ( 270 , 000 C ) ⋅ ( 58.69 g/mol ) ( 2 e − / ion ) ⋅ ( 96 , 485 C/mol e − ) m = \frac{Q_{\text{charge}} \cdot M}{n \cdot F} = \frac{(270,000\text{ C}) \cdot (58.69\text{ g/mol})}{(2\text{ e}^-/\text{ion}) \cdot (96,485\text{ C/mol e}^-)} m = n ⋅ F Q charge ⋅ M = ( 2 e − / ion ) ⋅ ( 96 , 485 C/mol e − ) ( 270 , 000 C ) ⋅ ( 58.69 g/mol ) m = 15 , 846 , 300 192 , 970 = 82.118 g ≈ 82.1 g m = \frac{15,846,300}{192,970} = 82.118\text{ g} \approx 82.1\text{ g} m = 192 , 970 15 , 846 , 300 = 82.118 g ≈ 82.1 g Conclusion: Operating at 25.0 A 25.0\text{ A} 25.0 A for 3 hours 3\text{ hours} 3 hours deposits 82.1 g 82.1\text{ g} 82.1 g of nickel coating onto the steel components.
Corrosion Principles and Mitigation
Corrosion is the unintentional electrochemical destruction of metals by environmental reaction. A complete corrosion cell requires four elements: Anode , Cathode , Electrolyte , and Metallic Conductive Path .
Fundamental Corrosion Reactions (Steel in Water)
Anodic Reaction (Oxidation): Metal dissolves, liberating electrons. Fe ( s ) → Fe 2 + ( a q ) + 2 e − \text{Fe}(s) \rightarrow \text{Fe}^{2+}(aq) + 2 e^- Fe ( s ) → Fe 2 + ( a q ) + 2 e −
Cathodic Reaction (Reduction): Oxygen or hydrogen ions consume electrons.
Neutral/Basic Aerated Water: O 2 + 2 H 2 O + 4 e − → 4 OH − \text{O}_2 + 2 \text{H}_2\text{O} + 4 e^- \rightarrow 4 \text{OH}^- O 2 + 2 H 2 O + 4 e − → 4 OH −
Acidic Environment: 2 H + + 2 e − → H 2 ( g ) 2 \text{H}^+ + 2 e^- \rightarrow \text{H}_2(g) 2 H + + 2 e − → H 2 ( g )
Galvanic Series and Galvanic Corrosion
When two dissimilar metals are electrically coupled in an electrolyte, the metal higher (more active/anodic) in the Galvanic Series corrodes preferentially, protecting the less active (cathodic/noble) metal.
Engineering Corrosion Protection Techniques
Sacrificial Anode Cathodic Protection (SACP): Connecting structural steel (e.g., pipelines, ship hulls) to a more active, sacrificial metal anode (Magnesium, Zinc, or Aluminum). The active anode corrodes while steel acts as the cathode.
Impressed Current Cathodic Protection (ICCP): Applying an external DC power supply to drive electrons into the protected structure using inert non-consumable anodes.
Galvanization: Coating steel with a protective layer of Zinc. Zinc provides both a barrier and sacrificial anodic protection if scratched.
Inhibitors & Coatings: Epoxy paint barriers, anodic passivating inhibitors (chromates/nitrites), or cathodic inhibitors.
4. Summary Table of Electrochemical Cell Types & Corrosion Control
Feature / Technique Operational Mechanism Key Reactions / Parameters Engineering Application
Galvanic Cell Spontaneous chemical to electrical E cell ∘ > 0 , Δ G ∘ < 0 E^\circ_{\text{cell}} > 0, \Delta G^\circ < 0 E cell ∘ > 0 , Δ G ∘ < 0 Primary & secondary batteries, fuel cells
Electrolytic Cell External electrical work drives non-spontaneous reaction E cell ∘ < 0 , Δ G ∘ > 0 E^\circ_{\text{cell}} < 0, \Delta G^\circ > 0 E cell ∘ < 0 , Δ G ∘ > 0 Electroplating, aluminum refining (Hall-Héroult)
Faraday's Law Mass electrodeposited is proportional to charge I ⋅ t I \cdot t I ⋅ t m = I ⋅ t ⋅ M n ⋅ F m = \frac{I \cdot t \cdot M}{n \cdot F} m = n ⋅ F I ⋅ t ⋅ M Electroplating thickness control, metal refining
Sacrificial Anode Galvanic coupling to a more active metal Magnesium/Zinc anode corrodes Underground pipelines, water heaters, ship hulls
Impressed Current (ICCP) External DC power source supplies cathodic protective current Inert anode (titanium/mixed metal oxide) Large oil platforms, reinforced concrete bridges