Study guide

3.1 Stoichiometry, Chemical Reactions, and Solutions

FE Other Disciplines Fundamentals of Engineering

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Strategy

About the FE Other Disciplines Exam How to Use This Study Guide

2 Chapter 1: Mathematics

1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration

3 Chapter 2: Probability and Statistics

2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression

4 Chapter 3: Chemistry

3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics

5 Chapter 4: Instrumentation and Controls

4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic

6 Chapter 5: Engineering Ethics and Societal Impacts

5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety

7 Chapter 6: Safety, Health, and Environment

6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates

8 Chapter 7: Engineering Economics

7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees

9 Chapter 8: Statics

8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c

10 Chapter 9: Dynamics

9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping

11 Chapter 10: Strength of Materials

10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria

12 Chapter 11: Materials

11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design

13 Chapter 12: Fluid Mechanics

12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law

14 Chapter 13: Basic Electrical Engineering

13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter

15 Chapter 14: Thermodynamics and Heat Transfer

14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart

3.1 Stoichiometry, Chemical Reactions, and Solutions

Key Takeaways Explain This Topic AI

Molar mass ( M M M ) converts mass into moles, allowing quantitative analysis of chemical reactions through balanced stoichiometric ratios.

The limiting reagent dictates the maximum theoretical yield of a chemical reaction, while percent yield measures operational efficiency via (actual yield / theoretical yield) * 100%.

Solution concentrations are expressed through molarity ( M M M , mol solute/L solution), molality ( m m m , mol solute/kg solvent), mass fraction (% w/w), and mole fraction ( χ \chi χ ).

Volumetric dilutions follow M 1 V 1 = M 2 V 2 M_1 V_1 = M_2 V_2 M 1 ​ V 1 ​ = M 2 ​ V 2 ​ , while normality ( N N N ) accounts for reaction equivalents per liter.

Last updated: August 2026

3.1 Stoichiometry, Chemical Reactions, and Solutions

Chemistry concepts on the FE Other Disciplines exam test your ability to perform quantitative mass and mole balances, identify reaction limitations, calculate theoretical and actual product yields, and analyze solution compositions. Mastery of chemical stoichiometry and solution thermodynamics is fundamental across material science, environmental engineering, and process design.

1. Fundamentals of Stoichiometry and Mass Balances

Stoichiometry is the quantitative relationship between reactants and products in a chemical reaction. All chemical calculations rest on the Law of Conservation of Mass , which dictates that atoms are neither created nor destroyed during a chemical transformation.

The Mole Concept and Molar Mass

A mole (mol) represents 6.022 × 10 23 6.022 \times 10^{23} 6.022 × 1 0 23 chemical entities (Avogadro's number, N A N_A N A ​ ). The mass of one mole of a substance is its molar mass ( M M M , measured in g/mol \text{g/mol} g/mol or kg/kmol \text{kg/kmol} kg/kmol ), which is numerically equivalent to its atomic or molecular weight found on the Periodic Table.

NCEES Formula: Mass-to-Mole Conversion n = m M n = \frac{m}{M} n = M m ​

where:

  • n n n = quantity of substance (moles, mol \text{mol} mol )
  • m m m = mass of substance (grams, g \text{g} g )
  • M M M = molar mass of substance (grams per mole, g/mol \text{g/mol} g/mol )
  • Balancing Chemical Reactions

A stoichiometric equation must be balanced so that the number of atoms for each element is equal on both the reactant (left) and product (right) sides. The stoichiometric coefficients ( a , b , c , d a, b, c, d a , b , c , d ) define the molar ratios in which species react and form: a A + b B → c C + d D a A + b B \rightarrow c C + d D a A + b B → c C + d D

For example, in the complete combustion of methane: CH 4 ( g ) + 2 O 2 ( g ) → CO 2 ( g ) + 2 H 2 O ( g ) \text{CH}_4(g) + 2 \text{O}_2(g) \rightarrow \text{CO}_2(g) + 2 \text{H}_2\text{O}(g) CH 4 ​ ( g ) + 2 O 2 ​ ( g ) → CO 2 ​ ( g ) + 2 H 2 ​ O ( g )

One mole of methane reacts with two moles of diatomic oxygen to yield one mole of carbon dioxide and two moles of water vapor.

Loading diagram... Stoichiometric Limiting Reagent & Yield Calculation Flow

2. Limiting Reagents, Theoretical Yield, and Percent Yield

In industrial applications and chemical processes, reactants are rarely supplied in exact stoichiometric ratios. One reactant will be depleted first, stopping the reaction.

Limiting vs. Excess Reagents

Limiting Reagent: The reactant that is completely consumed first. It determines the maximum amount of product that can be formed.

Excess Reagent: The reactant(s) remaining after the limiting reagent has been completely consumed.

To identify the limiting reagent:

Convert the given mass of each reactant into moles ( n = m / M n = m / M n = m / M ).

Divide the moles of each reactant by its respective stoichiometric coefficient ( n i / ν i n_i / \nu_i n i ​ / ν i ​ ).

The reactant with the smallest ratio ( n i / ν i n_i / \nu_i n i ​ / ν i ​ ) is the limiting reagent.

Theoretical and Percent Yield

Theoretical Yield: The maximum calculated mass or moles of product formed assuming 100% conversion of the limiting reagent.

Actual Yield: The mass or moles of product actually recovered from an experiment or industrial process (often less than theoretical yield due to side reactions, incomplete conversion, or recovery losses).

NCEES Formula: Percent Yield Percent Yield = ( Actual Yield Theoretical Yield ) × 100 % \text{Percent Yield} = \left( \frac{\text{Actual Yield}}{\text{Theoretical Yield}} \right) \times 100\% Percent Yield = ( Theoretical Yield Actual Yield ​ ) × 100%

Worked Engineering Example: Propane Combustion and Yield Calculation

Problem: A burner unit combusts 100.0 g 100.0\text{ g} 100.0 g of propane gas ( C 3 H 8 \text{C}_3\text{H}_8 C 3 ​ H 8 ​ , molar mass = 44.10 g/mol = 44.10\text{ g/mol} = 44.10 g/mol ) with 300.0 g 300.0\text{ g} 300.0 g of oxygen gas ( O 2 \text{O}_2 O 2 ​ , molar mass = 32.00 g/mol = 32.00\text{ g/mol} = 32.00 g/mol ). The balanced reaction is: C 3 H 8 ( g ) + 5 O 2 ( g ) → 3 CO 2 ( g ) + 4 H 2 O ( g ) \text{C}_3\text{H}_8(g) + 5 \text{O}_2(g) \rightarrow 3 \text{CO}_2(g) + 4 \text{H}_2\text{O}(g) C 3 ​ H 8 ​ ( g ) + 5 O 2 ​ ( g ) → 3 CO 2 ​ ( g ) + 4 H 2 ​ O ( g )

Determine which reactant is the limiting reagent.

Calculate the theoretical yield of carbon dioxide ( CO 2 \text{CO}_2 CO 2 ​ , molar mass = 44.01 g/mol = 44.01\text{ g/mol} = 44.01 g/mol ) in grams.

If the combustion system operates at an actual recovery of 219.1 g 219.1\text{ g} 219.1 g of CO 2 \text{CO}_2 CO 2 ​ , calculate the percent yield.

Solution:

Step 1: Calculate initial moles of each reactant: n C 3 H 8 = 100.0 g 44.10 g/mol = 2.2676 mol n_{\text{C}_3\text{H}_8} = \frac{100.0\text{ g}}{44.10\text{ g/mol}} = 2.2676\text{ mol} n C 3 ​ H 8 ​ ​ = 44.10 g/mol 100.0 g ​ = 2.2676 mol n O 2 = 300.0 g 32.00 g/mol = 9.3750 mol n_{\text{O}_2} = \frac{300.0\text{ g}}{32.00\text{ g/mol}} = 9.3750\text{ mol} n O 2 ​ ​ = 32.00 g/mol 300.0 g ​ = 9.3750 mol

Step 2: Compare stoichiometric ratios ( n / ν n / \nu n / ν ):

For C 3 H 8 \text{C}_3\text{H}_8 C 3 ​ H 8 ​ : 2.2676 1 = 2.2676 mol \frac{2.2676}{1} = 2.2676\text{ mol} 1 2.2676 ​ = 2.2676 mol

For O 2 \text{O}_2 O 2 ​ : 9.3750 5 = 1.8750 mol \frac{9.3750}{5} = 1.8750\text{ mol} 5 9.3750 ​ = 1.8750 mol

Since 1.8750 < 2.2676 1.8750 < 2.2676 1.8750 < 2.2676 , oxygen ( O 2 \text{O}_2 O 2 ​ ) is the limiting reagent .

Step 3: Calculate theoretical yield of CO 2 \text{CO}_2 CO 2 ​ : Using the mole ratio between limiting reagent O 2 \text{O}_2 O 2 ​ and product CO 2 \text{CO}_2 CO 2 ​ ( 5 mol O 2 : 3 mol CO 2 5\text{ mol O}_2 : 3\text{ mol CO}_2 5 mol O 2 ​ : 3 mol CO 2 ​ ): n CO 2 , theoretical = 9.3750 mol O 2 × ( 3 mol CO 2 5 mol O 2 ) = 5.6250 mol CO 2 n_{\text{CO}_2,\text{ theoretical}} = 9.3750\text{ mol O}_2 \times \left( \frac{3\text{ mol CO}_2}{5\text{ mol O}_2} \right) = 5.6250\text{ mol CO}_2 n CO 2 ​ , theoretical ​ = 9.3750 mol O 2 ​ × ( 5 mol O 2 ​ 3 mol CO 2 ​ ​ ) = 5.6250 mol CO 2 ​ Converting moles to mass: m CO 2 , theoretical = 5.6250 mol × 44.01 g/mol = 247.56 g m_{\text{CO}_2,\text{ theoretical}} = 5.6250\text{ mol} \times 44.01\text{ g/mol} = 247.56\text{ g} m CO 2 ​ , theoretical ​ = 5.6250 mol × 44.01 g/mol = 247.56 g

Step 4: Calculate percent yield: Percent Yield = ( 219.1 g 247.56 g ) × 100 % = 88.50 % \text{Percent Yield} = \left( \frac{219.1\text{ g}}{247.56\text{ g}} \right) \times 100\% = 88.50\% Percent Yield = ( 247.56 g 219.1 g ​ ) × 100% = 88.50% Conclusion: Oxygen limits product formation, yielding a theoretical maximum of 247.6 g 247.6\text{ g} 247.6 g of CO 2 \text{CO}_2 CO 2 ​ and achieving an 88.5 % 88.5\% 88.5% operational yield.

3. Solution Concentration Metrics and Volumetric Dilutions

A solution is a homogeneous mixture consisting of a solute dissolved in a solvent. Quantitative engineering calculations require expressing concentration units based on volume, mass, or mole fractions.

Definitions of Concentration Units

Molarity ( M M M ): Moles of solute per liter of total solution ( mol/L \text{mol/L} mol/L or M \text{M} M ). M = n solute V solution (L) M = \frac{n_{\text{solute}}}{V_{\text{solution (L)}}} M = V solution (L) ​ n solute ​ ​ Note: Molarity varies slightly with temperature due to volumetric expansion of liquids.

Molality ( m m m ): Moles of solute per kilogram of solvent ( mol/kg \text{mol/kg} mol/kg or m \text{m} m ). m = n solute m solvent (kg) m = \frac{n_{\text{solute}}}{m_{\text{solvent (kg)}}} m = m solvent (kg) ​ n solute ​ ​ Note: Molality is temperature-independent.

Mass Percent ( % w/w \% \text{w/w} % w/w ): Mass of solute divided by total solution mass, expressed as a percentage. % w/w = ( m solute m solute + m solvent ) × 100 % \% \text{w/w} = \left( \frac{m_{\text{solute}}}{m_{\text{solute}} + m_{\text{solvent}}} \right) \times 100\% % w/w = ( m solute ​ + m solvent ​ m solute ​ ​ ) × 100%

Mole Fraction ( χ i \chi_i χ i ​ ): Moles of component i i i divided by the total moles of all components in the mixture. χ i = n i ∑ n j \chi_i = \frac{n_i}{\sum n_j} χ i ​ = ∑ n j ​ n i ​ ​

Normality ( N N N ): Number of equivalents of solute per liter of solution ( eq/L \text{eq/L} eq/L or N \text{N} N ). N = n e q × M N = n_{eq} \times M N = n e q ​ × M

where n e q n_{eq} n e q ​ is the number of reactive equivalents per mole of solute (e.g., n e q = 2 n_{eq} = 2 n e q ​ = 2 for H 2 SO 4 \text{H}_2\text{SO}_4 H 2 ​ SO 4 ​ donating 2 H + 2\text{ H}^+ 2 H + ions, or n e q = 2 n_{eq} = 2 n e q ​ = 2 for Ca 2 + \text{Ca}^{2+} Ca 2 + ions).

Volumetric Dilution Law

When diluting a concentrated stock solution with pure solvent, the total moles of solute remain constant before and after dilution ( n 1 = n 2 n_1 = n_2 n 1 ​ = n 2 ​ ):

NCEES Formula: Volumetric Dilution M 1 V 1 = M 2 V 2 or C 1 V 1 = C 2 V 2 M_1 V_1 = M_2 V_2 \quad \text{or} \quad C_1 V_1 = C_2 V_2 M 1 ​ V 1 ​ = M 2 ​ V 2 ​ or C 1 ​ V 1 ​ = C 2 ​ V 2 ​

where:

  • M 1 , C 1 M_1, C_1 M 1 ​ , C 1 ​ = initial concentration of stock solution
  • V 1 V_1 V 1 ​ = volume of concentrated stock solution required
  • M 2 , C 2 M_2, C_2 M 2 ​ , C 2 ​ = desired final concentration
  • V 2 V_2 V 2 ​ = final volume of diluted solution
  • Worked Engineering Example: Acid Stock Preparation and Dilution

Problem: An environmental testing lab requires 2.50 L 2.50\text{ L} 2.50 L of a 0.450 M 0.450\text{ M} 0.450 M sulfuric acid ( H 2 SO 4 \text{H}_2\text{SO}_4 H 2 ​ SO 4 ​ ) solution. The available concentrated laboratory stock acid is 98.0 % w/w 98.0\%\text{ w/w} 98.0% w/w H 2 SO 4 \text{H}_2\text{SO}_4 H 2 ​ SO 4 ​ with a mass density of ρ = 1.84 g/mL \rho = 1.84\text{ g/mL} ρ = 1.84 g/mL and a molar mass of M = 98.08 g/mol M = 98.08\text{ g/mol} M = 98.08 g/mol .

Calculate the molarity ( M 1 M_1 M 1 ​ ) of the concentrated stock sulfuric acid solution.

Determine the volume ( V 1 V_1 V 1 ​ ) of stock acid in milliliters required to prepare the diluted solution.

Solution:

Step 1: Determine molarity of concentrated stock acid ( M 1 M_1 M 1 ​ ): Consider 1.00 L 1.00\text{ L} 1.00 L ( 1000 mL 1000\text{ mL} 1000 mL ) of stock acid solution: m solution = ρ × V = 1.84 g/mL × 1000 mL = 1840 g m_{\text{solution}} = \rho \times V = 1.84\text{ g/mL} \times 1000\text{ mL} = 1840\text{ g} m solution ​ = ρ × V = 1.84 g/mL × 1000 mL = 1840 g Mass of pure H 2 SO 4 \text{H}_2\text{SO}_4 H 2 ​ SO 4 ​ solute in 1.00 L 1.00\text{ L} 1.00 L : m solute = 1840 g × 0.980 = 1803.2 g m_{\text{solute}} = 1840\text{ g} \times 0.980 = 1803.2\text{ g} m solute ​ = 1840 g × 0.980 = 1803.2 g Moles of H 2 SO 4 \text{H}_2\text{SO}_4 H 2 ​ SO 4 ​ solute: n solute = 1803.2 g 98.08 g/mol = 18.385 mol n_{\text{solute}} = \frac{1803.2\text{ g}}{98.08\text{ g/mol}} = 18.385\text{ mol} n solute ​ = 98.08 g/mol 1803.2 g ​ = 18.385 mol Concentration of stock acid: M 1 = 18.385 mol 1.00 L = 18.385 M M_1 = \frac{18.385\text{ mol}}{1.00\text{ L}} = 18.385\text{ M} M 1 ​ = 1.00 L 18.385 mol ​ = 18.385 M

Step 2: Calculate required stock volume ( V 1 V_1 V 1 ​ ) using M 1 V 1 = M 2 V 2 M_1 V_1 = M_2 V_2 M 1 ​ V 1 ​ = M 2 ​ V 2 ​ : ( 18.385 M ) × V 1 = ( 0.450 M ) × ( 2.50 L ) (18.385\text{ M}) \times V_1 = (0.450\text{ M}) \times (2.50\text{ L}) ( 18.385 M ) × V 1 ​ = ( 0.450 M ) × ( 2.50 L ) V 1 = 1.125 M ⋅ L 18.385 M = 0.06119 L = 61.19 mL V_1 = \frac{1.125\text{ M}\cdot\text{L}}{18.385\text{ M}} = 0.06119\text{ L} = 61.19\text{ mL} V 1 ​ = 18.385 M 1.125 M ⋅ L ​ = 0.06119 L = 61.19 mL Conclusion: Measuring 61.2 mL 61.2\text{ mL} 61.2 mL of 18.4 M 18.4\text{ M} 18.4 M concentrated stock acid and diluting with distilled water to a final volume of 2.50 L 2.50\text{ L} 2.50 L produces the desired 0.450 M 0.450\text{ M} 0.450 M solution.

4. Summary Table of NCEES Solution Concentration Metrics

Unit Symbol Formula Temp. Dependent? Key Engineering Application

Molarity M M M n solute V solution (L) \frac{n_{\text{solute}}}{V_{\text{solution (L)}}} V solution (L) ​ n solute ​ ​ Yes Volumetric titrations, aqueous kinetics

Molality m m m n solute m solvent (kg) \frac{n_{\text{solute}}}{m_{\text{solvent (kg)}}} m solvent (kg) ​ n solute ​ ​ No Boiling point elevation, freezing point depression

Mass Percent % w/w \% \text{w/w} % w/w m solute m total × 100 % \frac{m_{\text{solute}}}{m_{\text{total}}} \times 100\% m total ​ m solute ​ ​ × 100% No Commercial chemical stock specifications

Mole Fraction χ i \chi_i χ i ​ n i ∑ n j \frac{n_i}{\sum n_j} ∑ n j ​ n i ​ ​ No VLE phase equilibrium, partial pressure calculations

Normality N N N n e q × M n_{eq} \times M n e q ​ × M Yes Neutralization reactions, electrochemistry equivalents