Study guide
9.5 Impulse-Momentum, Impact, and Coefficient of Restitution
FE Other Disciplines Fundamentals of Engineering
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Strategy
About the FE Other Disciplines Exam How to Use This Study Guide
2 Chapter 1: Mathematics
1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration
3 Chapter 2: Probability and Statistics
2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression
4 Chapter 3: Chemistry
3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics
5 Chapter 4: Instrumentation and Controls
4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic
6 Chapter 5: Engineering Ethics and Societal Impacts
5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety
7 Chapter 6: Safety, Health, and Environment
6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates
8 Chapter 7: Engineering Economics
7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees
9 Chapter 8: Statics
8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c
10 Chapter 9: Dynamics
9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping
11 Chapter 10: Strength of Materials
10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria
12 Chapter 11: Materials
11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design
13 Chapter 12: Fluid Mechanics
12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law
14 Chapter 13: Basic Electrical Engineering
13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter
15 Chapter 14: Thermodynamics and Heat Transfer
14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart
9.5 Impulse-Momentum, Impact, and Coefficient of Restitution
Key Takeaways Explain This Topic AI
Linear impulse equals the change in linear momentum, so a force acting over a time interval changes velocity.
Total momentum is conserved in any collision because the internal impact forces are equal and opposite, but kinetic energy is conserved only in a perfectly elastic collision.
The coefficient of restitution is the ratio of separation velocity to approach velocity along the line of impact, equal to 1 for perfectly elastic and 0 for perfectly plastic impact.
In a perfectly plastic collision the bodies move together afterward at the common velocity given by momentum conservation.
Angular momentum about a fixed axis is conserved when no external moment acts, which explains why a spinning skater speeds up on pulling in their arms.
Last updated: August 2026
9.5 Impulse-Momentum, Impact, and Coefficient of Restitution
Impulse-momentum is the time-domain counterpart of work-energy, and it is the only tool that resolves collisions. NCEES lists impulse and momentum (linear and angular) as a Dynamics sub-topic; the governing idea is that momentum survives a collision even when kinetic energy does not.
Impulse-Momentum and Impact Mechanics
The Impulse-Momentum Principle integrates forces over time and is ideal for problems involving forces applied over specific time durations or sudden impacts.
Linear Impulse and Momentum m v 1 + ∫ t 1 t 2 F d t = m v 2 m \mathbf{v}_1 + \int_{t_1}^{t_2} \mathbf{F} dt = m \mathbf{v}_2 m v 1 + ∫ t 1 t 2 F d t = m v 2
If the net linear impulse ∑ J = 0 \sum \mathbf{J} = \mathbf{0} ∑ J = 0 , linear momentum is conserved: m v 1 = m v 2 m \mathbf{v}_1 = m \mathbf{v}_2 m v 1 = m v 2 .
Angular Impulse and Momentum I G ω 1 + ∫ t 1 t 2 M G d t = I G ω 2 I_G \omega_1 + \int_{t_1}^{t_2} M_G dt = I_G \omega_2 I G ω 1 + ∫ t 1 t 2 M G d t = I G ω 2
Direct Central Impact and Coefficient of Restitution ( e e e )
During a collision between bodies A A A and B B B along the line of impact, conservation of total linear momentum dictates: m A v A 1 + m B v B 1 = m A v A 2 + m B v B 2 m_A v_{A1} + m_B v_{B1} = m_A v_{A2} + m_B v_{B2} m A v A 1 + m B v B 1 = m A v A 2 + m B v B 2
The coefficient of restitution e e e defines the ratio of relative separation velocity to relative approach velocity: ≠ = v B 2 − v A 2 v A 1 − v B 1 \ne = \frac{v_{B2} - v_{A2}}{v_{A1} - v_{B1}} = = v A 1 − v B 1 v B 2 − v A 2
Elastic Impact ( e = 1 e = 1 e = 1 ): Zero kinetic energy loss ( T 1 = T 2 T_1 = T_2 T 1 = T 2 ).
Inelastic Impact ( 0 < e < 1 0 < e < 1 0 < e < 1 ): Partial kinetic energy loss due to deformation/heat.
Perfectly Plastic Impact ( e = 0 e = 0 e = 0 ): Maximum kinetic energy loss; bodies stick together ( v A 2 = v B 2 = v 2 v_{A2} = v_{B2} = v_2 v A 2 = v B 2 = v 2 ).
The Elastic-to-Plastic Spectrum
The coefficient of restitution e e e measures how much relative velocity survives the impact along the line of impact: ≠ = relative separation velocity relative approach velocity = v B ′ − v A ′ v A − v B \ne = \frac{\text{relative separation velocity}}{\text{relative approach velocity}} = \frac{v_B' - v_A'}{v_A - v_B} = = relative approach velocity relative separation velocity = v A − v B v B ′ − v A ′
- e e e Name Momentum Kinetic energy Outcome
- 1.0 Perfectly elastic Conserved Conserved Maximum separation; equal masses exchange velocities
- 0 < e < 1 0 < e < 1 0 < e < 1 Partially elastic Conserved Partially lost Real collisions
- 0 Perfectly plastic (inelastic) Conserved Maximum loss Bodies move together
The rule that anchors every collision problem: momentum is always conserved; kinetic energy is not . The internal impact forces are equal and opposite by Newton's third law, so they cancel in the momentum sum regardless of how much deformation, heat, or sound they produce. Any exam option that conserves kinetic energy in a non-elastic collision is wrong.
The Two Equations for Direct Central Impact
Solve these simultaneously for the two unknown final velocities: m A v A + m B v B = m A v A ′ + m B v B ′ (momentum) m_A v_A + m_B v_B = m_A v_A' + m_B v_B' \qquad\text{(momentum)} m A v A + m B v B = m A v A ′ + m B v B ′ (momentum) ≠ ( v A − v B ) = v B ′ − v A ′ (restitution) \ne(v_A - v_B) = v_B' - v_A' \qquad\text{(restitution)} = ( v A − v B ) = v B ′ − v A ′ (restitution)
For a perfectly plastic collision ( e = 0 e = 0 e = 0 ), the bodies move together and one equation suffices: v ′ = m A v A + m B v B m A + m B v' = \frac{m_A v_A + m_B v_B}{m_A + m_B} v ′ = m A + m B m A v A + m B v B
Drop-Height Test for e e e
Dropping a ball from h 1 h_1 h 1 and measuring its rebound h 2 h_2 h 2 gives e e e directly, since v = 2 g h v = \sqrt{2gh} v = 2 g h : ≠ = v rebound v impact = h 2 h 1 \ne = \frac{v_{\text{rebound}}}{v_{\text{impact}}} = \sqrt{\frac{h_2}{h_1}} = = v impact v rebound = h 1 h 2
A ball rebounding to half its drop height has e = 0.5 = 0.707 e = \sqrt{0.5} = 0.707 e = 0.5 = 0.707 , not 0.5 — because e e e is a velocity ratio and height scales with velocity squared. This square-root relationship is a reliable exam distractor.
Worked Example: Plastic Impact and Energy Loss
A 1{,}500 kg car at 20 m/s strikes a stationary 2{,}500 kg truck. The vehicles lock together. Find the common velocity and the fraction of kinetic energy lost.
Momentum conservation: v ′ = 1,500 ( 20 ) + 2,500 ( 0 ) 1,500 + 2,500 = 30,000 4,000 = 7.5 m/s v' = \frac{1{,}500(20) + 2{,}500(0)}{1{,}500 + 2{,}500} = \frac{30{,}000}{4{,}000} = 7.5\ \text{m/s} v ′ = 1 , 500 + 2 , 500 1 , 500 ( 20 ) + 2 , 500 ( 0 ) = 4 , 000 30 , 000 = 7.5 m/s
Kinetic energy before and after: K E 1 = 1 2 ( 1,500 ) ( 20 ) 2 = 300,000 J KE_1 = \tfrac{1}{2}(1{,}500)(20)^2 = 300{,}000\ \text{J} K E 1 = 2 1 ( 1 , 500 ) ( 20 ) 2 = 300 , 000 J K E 2 = 1 2 ( 4,000 ) ( 7.5 ) 2 = 1 2 ( 4,000 ) ( 56.25 ) = 112,500 J KE_2 = \tfrac{1}{2}(4{,}000)(7.5)^2 = \tfrac{1}{2}(4{,}000)(56.25) = 112{,}500\ \text{J} K E 2 = 2 1 ( 4 , 000 ) ( 7.5 ) 2 = 2 1 ( 4 , 000 ) ( 56.25 ) = 112 , 500 J Fraction lost = 300,000 − 112,500 300,000 = 187,500 300,000 = 62.5 % \text{Fraction lost} = \frac{300{,}000 - 112{,}500}{300{,}000} = \frac{187{,}500}{300{,}000} = \boxed{62.5\%} Fraction lost = 300 , 000 300 , 000 − 112 , 500 = 300 , 000 187 , 500 = 62.5%
Nearly two-thirds of the kinetic energy is destroyed — converted into deformation, heat, and sound — while momentum is conserved exactly. That is the point of crumple-zone design: the energy absorbed in deforming structure is energy not delivered to occupants.
For a perfectly plastic collision with one body initially at rest, the fraction lost has a closed form worth recognizing:
Δ K E K E 1 = m B m A + m B = 2,500 4,000 = 0.625 \frac{\Delta KE}{KE_1} = \frac{m_B}{m_A + m_B} = \frac{2{,}500}{4{,}000} = 0.625 K E 1 Δ K E = m A + m B m B = 4 , 000 2 , 500 = 0.625 ✓
So the heavier the struck object relative to the striker, the larger the fraction of energy destroyed.
Conservation of Angular Momentum H O = I ω , ∑ M O = d H O d t H_O = I\omega, \qquad \sum M_O = \frac{dH_O}{dt} H O = I ω , ∑ M O = d t d H O
With no external moment about O O O , angular momentum is conserved: I 1 ω 1 = I 2 ω 2 I_1\omega_1 = I_2\omega_2 I 1 ω 1 = I 2 ω 2
A skater pulling in their arms reduces I I I , so ω \omega ω rises to compensate. Note that kinetic energy 1 2 I ω 2 \tfrac{1}{2}I\omega^2 2 1 I ω 2 increases in the process — supplied by the muscular work of pulling the arms in, not created from nothing.
For a particle at position r ⃗ \vec{r} r with momentum m v ⃗ m\vec{v} m v , angular momentum about O O O is H ⃗ O = r ⃗ × m v ⃗ \vec{H}_O = \vec{r}\times m\vec{v} H O = r × m v , with magnitude m v r sin θ mvr\sin\theta m v r sin θ — or simply m v d mvd m v d , where d d d is the perpendicular distance from O O O to the velocity's line of action.