Study guide
9.4 Work-Energy Principle, Power, and Efficiency
FE Other Disciplines Fundamentals of Engineering
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Strategy
About the FE Other Disciplines Exam How to Use This Study Guide
2 Chapter 1: Mathematics
1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration
3 Chapter 2: Probability and Statistics
2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression
4 Chapter 3: Chemistry
3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics
5 Chapter 4: Instrumentation and Controls
4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic
6 Chapter 5: Engineering Ethics and Societal Impacts
5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety
7 Chapter 6: Safety, Health, and Environment
6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates
8 Chapter 7: Engineering Economics
7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees
9 Chapter 8: Statics
8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c
10 Chapter 9: Dynamics
9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping
11 Chapter 10: Strength of Materials
10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria
12 Chapter 11: Materials
11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design
13 Chapter 12: Fluid Mechanics
12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law
14 Chapter 13: Basic Electrical Engineering
13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter
15 Chapter 14: Thermodynamics and Heat Transfer
14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart
9.4 Work-Energy Principle, Power, and Efficiency
Key Takeaways Explain This Topic AI
The work-energy principle states that the net work done on a body equals its change in kinetic energy, so problems that ask for speed rather than time are usually fastest by energy.
Spring work is one-half k times the square of the deflection, and gravity work is mgh independent of path.
Conservative forces such as gravity and springs store recoverable potential energy; friction is non-conservative and dissipates energy as heat.
Power is force times velocity for translation and torque times angular velocity for rotation, with 1 hp equal to 550 ft-lbf/s or 746 W.
Efficiency is useful output divided by total input and, for series components, the overall efficiency is the product of the individual efficiencies.
Last updated: August 2026
9.4 Work-Energy Principle, Power, and Efficiency
The work-energy method trades time for distance: it answers "how fast is it moving after traveling this far" without ever integrating an acceleration. NCEES lists work, energy, and power as a Dynamics sub-topic, and the energy route is almost always the faster of the two available approaches.
Principle of Work and Energy
The Work-Energy Principle is scalar-based and directly relates force, displacement, and velocity without requiring calculation of acceleration. T 1 + U 1 − 2 = T 2 T_1 + U_{1-2} = T_2 T 1 + U 1 − 2 = T 2
- Kinetic Energy ( T T T )
- Particle Translation: T = 1 2 m v 2 T = \frac{1}{2} m v^2 T = 2 1 m v 2
- Rigid Body Fixed-Axis Rotation: T = 1 2 I O ω 2 T = \frac{1}{2} I_O \omega^2 T = 2 1 I O ω 2
Rigid Body General Planar Motion: T = 1 2 m v G 2 + 1 2 I G ω 2 T = \frac{1}{2} m v_G^2 + \frac{1}{2} I_G \omega^2 T = 2 1 m v G 2 + 2 1 I G ω 2
Work Done by Forces ( U 1 − 2 U_{1-2} U 1 − 2 )
Variable Force: U 1 − 2 = ∫ s 1 s 2 F cos θ d s U_{1-2} = \int_{s_1}^{s_2} F \cos \theta ds U 1 − 2 = ∫ s 1 s 2 F cos θ d s
Constant Force: U 1 − 2 = F cos θ ( s 2 − s 1 ) U_{1-2} = F \cos \theta (s_2 - s_1) U 1 − 2 = F cos θ ( s 2 − s 1 )
Weight (Gravity): U 1 − 2 = − m g Δ y U_{1-2} = -m g \Delta y U 1 − 2 = − m g Δ y
Linear Spring: U 1 − 2 = − 1 2 k ( x 2 2 − x 1 2 ) U_{1-2} = -\frac{1}{2} k (x_2^2 - x_1^2) U 1 − 2 = − 2 1 k ( x 2 2 − x 1 2 )
Constant Moment / Couple: U 1 − 2 = M ( θ 2 − θ 1 ) U_{1-2} = M (\theta_2 - \theta_1) U 1 − 2 = M ( θ 2 − θ 1 )
Conservation of Mechanical Energy
When only conservative forces (gravity, springs) perform work, total mechanical energy is conserved: T 1 + V g 1 + V e 1 = T 2 + V g 2 + V e 2 T_1 + V_{g1} + V_{e1} = T_2 + V_{g2} + V_{e2} T 1 + V g 1 + V e 1 = T 2 + V g 2 + V e 2
where gravitational potential energy V g = m g h V_g = m g h V g = m g h and elastic potential energy V e = 1 2 k x 2 V_e = \frac{1}{2} k x^2 V e = 2 1 k x 2 .
Power
Power is the rate of doing work: P = d W d t = F ⃗ ⋅ v ⃗ = F v cos θ (translation) P = \frac{dW}{dt} = \vec{F}\cdot\vec{v} = Fv\cos\theta \qquad\text{(translation)} P = d t d W = F ⋅ v = F v cos θ (translation) P = T ω (rotation, with ω in rad/s) P = T\omega \qquad\text{(rotation, with }\omega\text{ in rad/s)} P = T ω (rotation, with ω in rad/s)
- Unit Equivalent
- 1 W 1 J/s = 1 N·m/s
- 1 hp 550 ft·lbf/s = 33{,}000 ft·lbf/min = 746 W
- 1 kW 1{,}000 W = 1.341 hp
- 1 Btu/h 0.293 W
The rotational power trap: P = T ω P = T\omega P = T ω requires ω \omega ω in rad/s , not rev/min. Feeding rpm directly in overstates power by 2 π / 60 = 9.55 2\pi/60 = 9.55 2 π /60 = 9.55 . A useful US Customary shortcut that bakes in the conversion: hp = T [ ft ⋅ lbf ] × N [ rpm ] 5,252 \text{hp} = \frac{T\ [\text{ft}\cdot\text{lbf}] \times N\ [\text{rpm}]}{5{,}252} hp = 5 , 252 T [ ft ⋅ lbf ] × N [ rpm ]
Efficiency η = useful output total input \eta = \frac{\text{useful output}}{\text{total input}} η = total input useful output
For components in series , efficiencies multiply : η overall = η 1 × η 2 × ⋯ × η n \eta_{\text{overall}} = \eta_1 \times \eta_2 \times \cdots \times \eta_n η overall = η 1 × η 2 × ⋯ × η n
This compounding is why long drive trains lose so much: three stages at 90% each deliver 0.9 3 = 72.9 % 0.9^3 = 72.9\% 0. 9 3 = 72.9% , not 90%.
Worked Example: Pump Motor Sizing Through a Drive Train
A pump must deliver 45 kW of hydraulic power. It is driven through a belt drive ( η = 0.94 \eta = 0.94 η = 0.94 ) by a motor ( η = 0.91 \eta = 0.91 η = 0.91 ), and the pump itself is 78% efficient. Find the electrical input power and the motor torque at 1{,}750 rpm.
Work backwards from the useful output. The pump's shaft input: P pump shaft = 45 0.78 = 57.7 kW P_{\text{pump shaft}} = \frac{45}{0.78} = 57.7\ \text{kW} P pump shaft = 0.78 45 = 57.7 kW
Through the belt: P motor shaft = 57.7 0.94 = 61.4 kW P_{\text{motor shaft}} = \frac{57.7}{0.94} = 61.4\ \text{kW} P motor shaft = 0.94 57.7 = 61.4 kW
Electrical input to the motor: P electrical = 61.4 0.91 = 67.5 kW P_{\text{electrical}} = \frac{61.4}{0.91} = \boxed{67.5\ \text{kW}} P electrical = 0.91 61.4 = 67.5 kW
Check with the compounded efficiency: η overall = 0.78 ( 0.94 ) ( 0.91 ) = 0.667 \eta_{\text{overall}} = 0.78(0.94)(0.91) = 0.667 η overall = 0.78 ( 0.94 ) ( 0.91 ) = 0.667 , and 45 / 0.667 = 67.5 45/0.667 = 67.5 45/0.667 = 67.5 kW ✓
Motor torque: ω = 2 π ( 1,750 ) 60 = 183.3 rad/s \omega = \frac{2\pi(1{,}750)}{60} = 183.3\ \text{rad/s} ω = 60 2 π ( 1 , 750 ) = 183.3 rad/s T = P ω = 61,400 183.3 = 335 N ⋅ m T = \frac{P}{\omega} = \frac{61{,}400}{183.3} = \boxed{335\ \text{N}\cdot\text{m}} T = ω P = 183.3 61 , 400 = 335 N ⋅ m
Note which power drives the torque: the motor's shaft output (61.4 kW), not its electrical input. The 6.1 kW difference is dissipated as heat in the motor windings and never appears as mechanical torque. Two-thirds of the electrical input reaches the water, and the delivered fraction would drop to 55% if each stage lost just five more points of efficiency.
When to Use Energy vs. Newton's Second Law
- Problem asks for… Use Why
- Speed after a displacement Work-energy Time never enters
- Speed after a time interval Impulse-momentum Displacement never enters
- Acceleration or a force at an instant Newton's second law Instantaneous relation
- Speed with springs and varying forces Work-energy Integrates the varying force automatically
- Velocities after a collision Impulse-momentum Internal forces cancel
Choosing correctly is worth more time on this exam than computing faster. A problem giving a distance and asking for a velocity is an energy problem; reaching for F = m a F = ma F = ma forces you to integrate an acceleration you do not need.