Study guide

12.3 Continuity Equation, Bernoulli Equation, and Energy Equation

FE Other Disciplines Fundamentals of Engineering

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Strategy

About the FE Other Disciplines Exam How to Use This Study Guide

2 Chapter 1: Mathematics

1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration

3 Chapter 2: Probability and Statistics

2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression

4 Chapter 3: Chemistry

3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics

5 Chapter 4: Instrumentation and Controls

4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic

6 Chapter 5: Engineering Ethics and Societal Impacts

5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety

7 Chapter 6: Safety, Health, and Environment

6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates

8 Chapter 7: Engineering Economics

7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees

9 Chapter 8: Statics

8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c

10 Chapter 9: Dynamics

9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping

11 Chapter 10: Strength of Materials

10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria

12 Chapter 11: Materials

11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design

13 Chapter 12: Fluid Mechanics

12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law

14 Chapter 13: Basic Electrical Engineering

13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter

15 Chapter 14: Thermodynamics and Heat Transfer

14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart

12.3 Continuity Equation, Bernoulli Equation, and Energy Equation

Key Takeaways Explain This Topic AI

The continuity equation enforces conservation of mass: for steady incompressible fluid flow, volumetric flow rate Q = A_1 * V_1 = A_2 * V_2 is constant throughout a closed conduit.

The Bernoulli equation expresses kinetic, potential, and pressure energy conservation along a streamline for steady, incompressible, frictionless (inviscid) flow: P_1/gamma + V_1^2/(2g) + z_1 = P_2/gamma + V_2^2/(2g) + z_2 = H.

Stagnation pressure P_0 = P + 0.5 * rho * V^2 combines static and dynamic pressures, forming the operational basis for velocity measurement in Pitot-static tubes.

The extended general energy equation incorporates real fluid loss mechanics (friction h_f and minor losses h_m) alongside mechanical energy additions from pumps (h_p) and extractions from turbines (h_t).

The Energy Grade Line (EGL) depicts total hydraulic head (P/gamma + V^2/(2g) + z), while the Hydraulic Grade Line (HGL) depicts piezometric head (P/gamma + z); cavitation occurs whenever local static pressure drops to or below the fluid vapor pressure (P <= P_v).

Last updated: August 2026

12.3 Continuity Equation, Bernoulli Equation, and Energy Equation

Core FE Exam Principle: Fluid dynamics governs fluids in motion using three fundamental conservation laws: Conservation of Mass (Continuity Equation), Conservation of Linear Momentum, and Conservation of Energy (Bernoulli and General Energy Equations).

Conservation of Mass and the Continuity Equation

For a fixed control volume under steady-state conditions, the rate of mass entering the system equals the rate of mass leaving: m ˙ = ∬ A ρ ( V ⋅ n ) d A = constant \dot{m} = \iint_A \rho (\mathbf{V} \cdot \mathbf{n}) dA = \text{constant} m ˙ = ∬ A ​ ρ ( V ⋅ n ) d A = constant

One-Dimensional Flow Formulations

Compressible Steady Flow: m ˙ = ρ 1 A 1 V 1 = ρ 2 A 2 V 2 [ kg/s or lbm/s ] \dot{m} = \rho_1 A_1 V_1 = \rho_2 A_2 V_2 \quad [\text{kg/s} \text{ or } \text{lbm/s}] m ˙ = ρ 1 ​ A 1 ​ V 1 ​ = ρ 2 ​ A 2 ​ V 2 ​ [ kg/s or lbm/s ]

Incompressible Steady Flow ( ρ 1 = ρ 2 = ρ \rho_1 = \rho_2 = \rho ρ 1 ​ = ρ 2 ​ = ρ ): Q = A 1 V 1 = A 2 V 2 [ m 3 / s or ft 3 / s or gpm ] Q = A_1 V_1 = A_2 V_2 \quad [\text{m}^3/\text{s} \text{ or } \text{ft}^3/\text{s} \text{ or } \text{gpm}] Q = A 1 ​ V 1 ​ = A 2 ​ V 2 ​ [ m 3 / s or ft 3 / s or gpm ]

where:

  • (Q) = Volumetric flow rate
  • (A) = Cross-sectional conduit area ( π D 2 4 \frac{\pi D^2}{4} 4 π D 2 ​ for circular pipes)
  • (V) = Average flow velocity across the section

Key Relation: Velocity varies inversely with the square of conduit diameter ( V 2 = V 1 ⋅ ( D 1 / D 2 ) 2 V_2 = V_1 \cdot (D_1 / D_2)^2 V 2 ​ = V 1 ​ ⋅ ( D 1 ​ / D 2 ​ ) 2 ). Halving the pipe diameter increases average velocity by a factor of 4.

The Bernoulli Equation

The Bernoulli equation represents Euler's equation integrated along a streamline for ideal fluid flow.

Four Governing Assumptions

Steady Flow: Flow parameters at any point do not change with time ( ∂ ∂ t = 0 \frac{\partial}{\partial t} = 0 ∂ t ∂ ​ = 0 ).

Incompressible Flow: Fluid density remains constant ( ρ = const \rho = \text{const} ρ = const ).

Frictionless / Inviscid Flow: Viscous shear stresses are negligible ( μ = 0 \mu = 0 μ = 0 ).

Flow Along a Streamline: Applied between two points along the same flow path.

Head Form of the Bernoulli Equation P 1 γ + V 1 2 2 g + z 1 = P 2 γ + V 2 2 2 g + z 2 = H \frac{P_1}{\gamma} + \frac{V_1^2}{2g} + z_1 = \frac{P_2}{\gamma} + \frac{V_2^2}{2g} + z_2 = H γ P 1 ​ ​ + 2 g V 1 2 ​ ​ + z 1 ​ = γ P 2 ​ ​ + 2 g V 2 2 ​ ​ + z 2 ​ = H

Each term possesses dimensions of length (meters or feet) representing specific energy per unit weight:

Pressure Head ( P γ \frac{P}{\gamma} γ P ​ ): Height of fluid column required to produce static pressure (P).

Velocity Head ( V 2 2 g \frac{V^2}{2g} 2 g V 2 ​ ): Vertical distance fluid would fall under gravity to attain velocity (V).

Elevation Head ((z)): Potential energy head above an arbitrary horizontal reference datum.

Total Hydraulic Head ((H)): Constant sum of all three energy heads along an ideal streamline.

Stagnation Pressure and Velocity Measurement

When fluid is brought to rest ( V 0 = 0 V_0 = 0 V 0 ​ = 0 ) isentropically at a stagnation point: P 0 = P + 1 2 ρ V 2 P_0 = P + \frac{1}{2} \rho V^2 P 0 ​ = P + 2 1 ​ ρ V 2

Static Pressure ((P)): Pressure exerted by fluid on a surface moving with the flow.

Dynamic Pressure ( 1 2 ρ V 2 \frac{1}{2} \rho V^2 2 1 ​ ρ V 2 ): Pressure rise caused by bringing fluid kinetic energy to rest.

Stagnation (Total) Pressure ( P 0 P_0 P 0 ​ ): Pressure at stagnation point.

Pitot-Static Tube Equation: V = 2 ( P 0 − P ) ρ = 2 Δ P ρ V = \sqrt{\frac{2(P_0 - P)}{\rho}} = \sqrt{\frac{2 \Delta P}{\rho}} V = ρ 2 ( P 0 ​ − P ) ​ ​ = ρ 2Δ P ​ ​

Extended General Energy Equation

Real engineering fluids experience head losses due to wall friction, fittings, and valves, while turbomachinery adds or extracts energy.

Extended Energy Equation P 1 γ + α 1 V 1 2 2 g + z 1 + h p = P 2 γ + α 2 V 2 2 2 g + z 2 + h t + h L \frac{P_1}{\gamma} + \alpha_1 \frac{V_1^2}{2g} + z_1 + h_p = \frac{P_2}{\gamma} + \alpha_2 \frac{V_2^2}{2g} + z_2 + h_t + h_L γ P 1 ​ ​ + α 1 ​ 2 g V 1 2 ​ ​ + z 1 ​ + h p ​ = γ P 2 ​ ​ + α 2 ​ 2 g V 2 2 ​ ​ + z 2 ​ + h t ​ + h L ​

where:

  • h p h_p h p ​ = Net useful head added by a pump ( m \text{m} m or ft \text{ft} ft )
  • h t h_t h t ​ = Net head extracted by a turbine ( m \text{m} m or ft \text{ft} ft )

h L h_L h L ​ = Total head loss between sections 1 and 2 ( h L = h f + h m h_L = h_f + h_m h L ​ = h f ​ + h m ​ )

α \alpha α = Kinetic energy correction factor ( α = 1.0 \alpha = 1.0 α = 1.0 for fully turbulent flow; α = 2.0 \alpha = 2.0 α = 2.0 for laminar flow)

Power Relations

Hydraulic Power Delivered by Pump ( W hyd W_{\text{hyd}} W hyd ​ ): W hyd = γ Q h p = ρ g Q h p [ Watts or ft ⋅ lbf/s ] W_{\text{hyd}} = \gamma Q h_p = \rho g Q h_p \quad [\text{Watts or } \text{ft}\cdot\text{lbf/s}] W hyd ​ = γ Q h p ​ = ρ g Q h p ​ [ Watts or ft ⋅ lbf/s ]

Note: 1 HP = 550 ft ⋅ lbf/s = 745.7 W 1 \text{ HP} = 550 \text{ ft}\cdot\text{lbf/s} = 745.7 \text{ W} 1 HP = 550 ft ⋅ lbf/s = 745.7 W .

Brake Horsepower / Input Shaft Power ( P shaft P_{\text{shaft}} P shaft ​ ): P shaft = W hyd η pump = γ Q h p η pump P_{\text{shaft}} = \frac{W_{\text{hyd}}}{\eta_{\text{pump}}} = \frac{\gamma Q h_p}{\eta_{\text{pump}}} P shaft ​ = η pump ​ W hyd ​ ​ = η pump ​ γ Q h p ​ ​

Hydraulic Grade Line (HGL) and Energy Grade Line (EGL)

Visualizing hydraulic head profiles along a pipeline highlights system pressure variations, energy drops, and potential flow hazards.

Energy Grade Line (EGL): Plots total available head along the pipeline flow path: EGL = P γ + V 2 2 g + z \text{EGL} = \frac{P}{\gamma} + \frac{V^2}{2g} + z EGL = γ P ​ + 2 g V 2 ​ + z

Hydraulic Grade Line (HGL): Plots piezometric head along the pipeline flow path: HGL = P γ + z \text{HGL} = \frac{P}{\gamma} + z HGL = γ P ​ + z

Vertical Clearance: The vertical distance between EGL and HGL at any point equals the local velocity head ( V 2 2 g \frac{V^2}{2g} 2 g V 2 ​ ). Energy

  • Head [m] ^ [EGL] = P/gamma + V^2/2g + z
  • | *---------------------------\\ (Slopes downward due to h_L)
  • | | <--- V^2/2g --->
  • | *----------------------------\\ [HGL] = P/gamma + z
  • | |
  • | | <--- P/gamma --->
  • | ---
  • +---------------------------------------> Pipeline Distance [x]
  • Key EGL/HGL Behavior Rules

For an open reservoir surface, both EGL and HGL coincide at the liquid free surface.

A pump causes an immediate vertical step-up in both EGL and HGL equal to pump head h p h_p h p ​ .

A turbine causes an immediate vertical step-down equal to turbine head h t h_t h t ​ .

Frictional head losses cause EGL and HGL to slope continuously downward in the direction of flow.

If the HGL drops below the physical pipe centerline, local static pressure P g a g e P_{gage} P g a g e ​ becomes negative (sub-atmospheric vacuum).

Cavitation Danger: If absolute static pressure falls to the fluid's vapor pressure ( P a b s ≤ P v P_{abs} \le P_v P ab s ​ ≤ P v ​ ), the liquid vaporizes into gas bubbles, causing severe erosion, pitting, and noise when the bubbles collapse downstream.

  • Comprehensive Worked Engineering Example
  • Problem Statement

Water ( ρ = 1000 kg/m 3 \rho = 1000 \text{ kg/m}^3 ρ = 1000 kg/m 3 , γ = 9.81 kN/m 3 \gamma = 9.81 \text{ kN/m}^3 γ = 9.81 kN/m 3 , vapor pressure P v = 2.34 kPa abs P_v = 2.34 \text{ kPa abs} P v ​ = 2.34 kPa abs ) is pumped from a lower open storage reservoir (Surface Elevation z 1 = 15.0 m z_1 = 15.0 \text{ m} z 1 ​ = 15.0 m ) to an elevated pressurized tank (Surface Elevation z 2 = 55.0 m z_2 = 55.0 \text{ m} z 2 ​ = 55.0 m ) at a volumetric flow rate Q = 0.080 m 3 / s Q = 0.080 \text{ m}^3/\text{s} Q = 0.080 m 3 / s .

The discharge tank carries a compressed air headspace gage pressure P 2 = 150.0 kPa gage P_2 = 150.0 \text{ kPa gage} P 2 ​ = 150.0 kPa gage . The suction line is a 200 mm 200 \text{ mm} 200 mm diameter pipe and the discharge line is a 150 mm 150 \text{ mm} 150 mm diameter pipe. The total combined friction and minor head losses across the entire piping system are calculated to be h L = 12.4 m h_L = 12.4 \text{ m} h L ​ = 12.4 m . Local atmospheric pressure is P a t m = 101.3 kPa P_{atm} = 101.3 \text{ kPa} P a t m ​ = 101.3 kPa .

Calculate:

The average fluid flow velocity in the discharge pipe V 2 V_2 V 2 ​ .

The net pump head h p h_p h p ​ required to maintain the flow rate.

The total electrical power consumed by the motor if pump efficiency is η pump = 80 % \eta_{\text{pump}} = 80\% η pump ​ = 80% and motor efficiency is η motor = 90 % \eta_{\text{motor}} = 90\% η motor ​ = 90% .

  • Step-by-Step Solution
  • Step 1: Compute Flow Velocities

Discharge pipe diameter D 2 = 0.150 m D_2 = 0.150 \text{ m} D 2 ​ = 0.150 m , area A 2 = π ( 0.150 ) 2 4 = 0.017671 m 2 A_2 = \frac{\pi (0.150)^2}{4} = 0.017671 \text{ m}^2 A 2 ​ = 4 π ( 0.150 ) 2 ​ = 0.017671 m 2 : V 2 = Q A 2 = 0.080 m 3 / s 0.017671 m 2 = 4.527 m/s V_2 = \frac{Q}{A_2} = \frac{0.080 \text{ m}^3/\text{s}}{0.017671 \text{ m}^2} = 4.527 \text{ m/s} V 2 ​ = A 2 ​ Q ​ = 0.017671 m 2 0.080 m 3 / s ​ = 4.527 m/s

Discharge velocity head: V 2 2 2 g = ( 4.527 ) 2 2 × 9.81 = 20.495 19.62 = 1.045 m \frac{V_2^2}{2g} = \frac{(4.527)^2}{2 \times 9.81} = \frac{20.495}{19.62} = 1.045 \text{ m} 2 g V 2 2 ​ ​ = 2 × 9.81 ( 4.527 ) 2 ​ = 19.62 20.495 ​ = 1.045 m

Step 2: Apply Extended Energy Equation Between Reservoir 1 and Tank 2

Datum at sea level ((z = 0)). Point 1 is at lower open surface; Point 2 is at elevated surface inside pressurized tank.

Point 1 conditions: P 1 = 0 (gage) P_1 = 0 \text{ (gage)} P 1 ​ = 0 (gage) , V 1 ≈ 0 V_1 \approx 0 V 1 ​ ≈ 0 (large surface), z 1 = 15.0 m z_1 = 15.0 \text{ m} z 1 ​ = 15.0 m .

Point 2 conditions: P 2 = 150.0 kPa gage P_2 = 150.0 \text{ kPa gage} P 2 ​ = 150.0 kPa gage , V 2 ≈ 0 V_2 \approx 0 V 2 ​ ≈ 0 (large surface in tank), z 2 = 55.0 m z_2 = 55.0 \text{ m} z 2 ​ = 55.0 m . P 1 γ + V 1 2 2 g + z 1 + h p = P 2 γ + V 2 2 2 g + z 2 + h L \frac{P_1}{\gamma} + \frac{V_1^2}{2g} + z_1 + h_p = \frac{P_2}{\gamma} + \frac{V_2^2}{2g} + z_2 + h_L γ P 1 ​ ​ + 2 g V 1 2 ​ ​ + z 1 ​ + h p ​ = γ P 2 ​ ​ + 2 g V 2 2 ​ ​ + z 2 ​ + h L ​ 0 + 0 + 15.0 + h p = 150.0 kPa 9.81 kN/m 3 + 0 + 55.0 + 12.4 0 + 0 + 15.0 + h_p = \frac{150.0 \text{ kPa}}{9.81 \text{ kN/m}^3} + 0 + 55.0 + 12.4 0 + 0 + 15.0 + h p ​ = 9.81 kN/m 3 150.0 kPa ​ + 0 + 55.0 + 12.4 15.0 + h p = 15.290 + 55.0 + 12.4 15.0 + h_p = 15.290 + 55.0 + 12.4 15.0 + h p ​ = 15.290 + 55.0 + 12.4 15.0 + h p = 82.690 ⟹ h p = 82.690 − 15.0 = 67.69 m 15.0 + h_p = 82.690 \implies h_p = 82.690 - 15.0 = 67.69 \text{ m} 15.0 + h p ​ = 82.690 ⟹ h p ​ = 82.690 − 15.0 = 67.69 m

Step 3: Compute Hydraulic Power, Shaft Power, and Total Electrical Input Power

Hydraulic power delivered to water: W hyd = γ Q h p = 9810 N/m 3 × 0.080 m 3 / s × 67.69 m = 53 , 123 W = 53.12 kW W_{\text{hyd}} = \gamma Q h_p = 9810 \text{ N/m}^3 \times 0.080 \text{ m}^3/\text{s} \times 67.69 \text{ m} = 53,123 \text{ W} = 53.12 \text{ kW} W hyd ​ = γ Q h p ​ = 9810 N/m 3 × 0.080 m 3 / s × 67.69 m = 53 , 123 W = 53.12 kW

Shaft power required from motor: P shaft = W hyd η pump = 53.123 kW 0.80 = 66.40 kW P_{\text{shaft}} = \frac{W_{\text{hyd}}}{\eta_{\text{pump}}} = \frac{53.123 \text{ kW}}{0.80} = 66.40 \text{ kW} P shaft ​ = η pump ​ W hyd ​ ​ = 0.80 53.123 kW ​ = 66.40 kW

Total electrical power consumed by motor: P elec = P shaft η motor = 66.404 kW 0.90 = 73.78 kW P_{\text{elec}} = \frac{P_{\text{shaft}}}{\eta_{\text{motor}}} = \frac{66.404 \text{ kW}}{0.90} = 73.78 \text{ kW} P elec ​ = η motor ​ P shaft ​ ​ = 0.90 66.404 kW ​ = 73.78 kW

Final Answer: Discharge velocity V 2 = 4.53 m/s V_2 = 4.53 \text{ m/s} V 2 ​ = 4.53 m/s , required pump head h p = 67.7 m h_p = 67.7 \text{ m} h p ​ = 67.7 m , and total electrical input power P elec = 73.8 kW P_{\text{elec}} = 73.8 \text{ kW} P elec ​ = 73.8 kW .