Study guide

12.2 Dimensionless Numbers and Flow Regimes

FE Other Disciplines Fundamentals of Engineering

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Strategy

About the FE Other Disciplines Exam How to Use This Study Guide

2 Chapter 1: Mathematics

1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration

3 Chapter 2: Probability and Statistics

2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression

4 Chapter 3: Chemistry

3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics

5 Chapter 4: Instrumentation and Controls

4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic

6 Chapter 5: Engineering Ethics and Societal Impacts

5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety

7 Chapter 6: Safety, Health, and Environment

6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates

8 Chapter 7: Engineering Economics

7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees

9 Chapter 8: Statics

8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c

10 Chapter 9: Dynamics

9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping

11 Chapter 10: Strength of Materials

10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria

12 Chapter 11: Materials

11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design

13 Chapter 12: Fluid Mechanics

12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law

14 Chapter 13: Basic Electrical Engineering

13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter

15 Chapter 14: Thermodynamics and Heat Transfer

14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart

12.2 Dimensionless Numbers and Flow Regimes

Key Takeaways Explain This Topic AI

NCEES names Reynolds, Froude, and Mach numbers explicitly and lists laminar and turbulent flow as a separate sub-topic.

Reynolds number is the ratio of inertial to viscous forces; in a pipe, flow is laminar below 2,100 and fully turbulent above about 4,000.

Froude number is the ratio of inertial to gravitational forces and classifies open-channel flow as subcritical below 1 and supercritical above 1.

Mach number is the ratio of flow speed to the local speed of sound, with compressibility effects usually negligible below about 0.3.

Dynamic similarity between a model and a full-scale prototype requires matching the dimensionless group that governs the dominant force.

Last updated: August 2026

12.2 Dimensionless Numbers and Flow Regimes

The NCEES Fluid Mechanics specification lists "Dimensionless numbers (e.g., Reynolds number, Froude number, Mach number)" and "Laminar and turbulent flow" as two of its twelve sub-topics. Every dimensionless group is a ratio of two competing forces , and knowing which forces a group compares tells you immediately what it predicts.

The Groups and What They Compare

Group Formula Ratio of Governs

Reynolds R e Re R e ρ V D μ = V D ν \dfrac{\rho V D}{\mu} = \dfrac{VD}{\nu} μ ρ V D ​ = ν V D ​ Inertial / viscous Laminar vs. turbulent; friction factor

Froude F r Fr F r V g L \dfrac{V}{\sqrt{gL}} gL ​ V ​ Inertial / gravitational Open-channel flow, wave drag, ship hulls

Mach M a Ma M a V c \dfrac{V}{c} c V ​ , c = k R T c = \sqrt{kRT} c = k RT ​ Inertial / elastic (compressibility) Compressible flow, choking

Weber W e We W e ρ V 2 L σ \dfrac{\rho V^2 L}{\sigma} σ ρ V 2 L ​ Inertial / surface tension Droplet breakup, atomization, sprays

Euler E u Eu E u Δ p ρ V 2 \dfrac{\Delta p}{\rho V^2} ρ V 2 Δ p ​ Pressure / inertial Pressure coefficient, cavitation

Reynolds Number and the Flow Regimes R e = ρ V D μ = V D ν Re = \frac{\rho V D}{\mu} = \frac{VD}{\nu} R e = μ ρ V D ​ = ν V D ​

where ν = μ / ρ \nu = \mu/\rho ν = μ / ρ is the kinematic viscosity (m²/s) and μ \mu μ is the dynamic (absolute) viscosity (Pa·s).

For flow in a circular pipe :

  • R e Re R e Regime Behavior
  • R e < 2,100 Re < 2{,}100 R e < 2 , 100 Laminar Smooth, ordered layers; f = 64 / R e f = 64/Re f = 64/ R e
  • 2,100 < R e < 4,000 2{,}100 < Re < 4{,}000 2 , 100 < R e < 4 , 000 Transitional Unpredictable, intermittent
  • R e > 4,000 Re > 4{,}000 R e > 4 , 000 Turbulent Chaotic mixing; f f f from Moody chart

The critical value depends on the geometry , and using the pipe value everywhere is a classic error:

Circular pipe: R e crit ≈ 2,100 Re_{\text{crit}} \approx 2{,}100 R e crit ​ ≈ 2 , 100 (based on diameter)

Flat plate boundary layer: R e crit ≈ 5 × 10 5 Re_{\text{crit}} \approx 5\times10^5 R e crit ​ ≈ 5 × 1 0 5 (based on distance from the leading edge)

Flow around a sphere: transition near R e ≈ 2 × 10 5 Re \approx 2\times10^5 R e ≈ 2 × 1 0 5

For non-circular ducts , replace D D D with the hydraulic diameter : D h = 4 A P D_h = \frac{4A}{P} D h ​ = P 4 A ​

where A A A is the flow area and P P P the wetted perimeter . For a circular pipe running full, D h = 4 ( π D 2 / 4 ) / ( π D ) = D D_h = 4(\pi D^2/4)/(\pi D) = D D h ​ = 4 ( π D 2 /4 ) / ( π D ) = D ✓, confirming the definition.

Velocity Profiles: The Consequence of Regime

  • Regime Profile shape V avg / V max ⁡ V_{\text{avg}}/V_{\max} V avg ​ / V m a x ​
  • Laminar Parabolic 0.50
  • Turbulent Blunt, nearly flat core ~0.80–0.85

Laminar flow in a pipe has V max ⁡ = 2 V avg V_{\max} = 2V_{\text{avg}} V m a x ​ = 2 V avg ​ exactly. Turbulent mixing flattens the profile because eddies transport momentum across the section, so the centerline velocity is only about 20% above the average. This matters for pitot-tube measurement : a single centerline reading must be corrected to obtain the average velocity, and the correction differs by a factor of nearly two between regimes.

Worked Example: Regime Determination

Water at 20 °C ( ρ = 998 \rho = 998 ρ = 998 kg/m³, μ = 1.002 × 10 − 3 \mu = 1.002\times10^{-3} μ = 1.002 × 1 0 − 3 Pa·s) flows at 0.08 m/s in a 40 mm pipe. Determine the regime, then find the velocity at which transition begins. R e = ρ V D μ = 998 ( 0.08 ) ( 0.040 ) 1.002 × 10 − 3 = 3.194 1.002 × 10 − 3 = 3,187 Re = \frac{\rho V D}{\mu} = \frac{998(0.08)(0.040)}{1.002\times10^{-3}} = \frac{3.194}{1.002\times10^{-3}} = 3{,}187 R e = μ ρ V D ​ = 1.002 × 1 0 − 3 998 ( 0.08 ) ( 0.040 ) ​ = 1.002 × 1 0 − 3 3.194 ​ = 3 , 187

Transitional — an awkward regime where neither the laminar formula nor the Moody chart is reliable, and one that designers avoid.

Velocity at the laminar limit R e = 2,100 Re = 2{,}100 R e = 2 , 100 : V = R e μ ρ D = 2,100 ( 1.002 × 10 − 3 ) 998 ( 0.040 ) = 2.104 39.92 = 0.0527 m/s V = \frac{Re\,\mu}{\rho D} = \frac{2{,}100(1.002\times10^{-3})}{998(0.040)} = \frac{2.104}{39.92} = 0.0527\ \text{m/s} V = ρ D R e μ ​ = 998 ( 0.040 ) 2 , 100 ( 1.002 × 1 0 − 3 ) ​ = 39.92 2.104 ​ = 0.0527 m/s

So laminar flow requires V < 5.3 V < 5.3 V < 5.3 cm/s in a 40 mm water line. Almost all practical water flow is turbulent , because the required velocity is so low — a useful sanity check when a problem's answer implies otherwise.

Note the strong temperature sensitivity: heating the water to 60 °C drops μ \mu μ to about 4.67 × 10 − 4 4.67\times10^{-4} 4.67 × 1 0 − 4 Pa·s, more than doubling R e Re R e at the same velocity. Viscosity of a liquid falls with temperature while that of a gas rises .

Froude Number and Open-Channel Classification F r = V g y (rectangular channel, depth y ) Fr = \frac{V}{\sqrt{gy}} \qquad\text{(rectangular channel, depth } y) F r = g y ​ V ​ (rectangular channel, depth y )

The Froude number compares the flow velocity to the speed at which a shallow-water surface wave travels, c = g y c = \sqrt{gy} c = g y ​ . That comparison determines whether a disturbance can propagate upstream:

F r Fr F r Regime Behavior

F r < 1 Fr < 1 F r < 1 Subcritical (tranquil) Deep, slow; disturbances travel both upstream and downstream; control is downstream

F r = 1 Fr = 1 F r = 1 Critical Minimum specific energy for the given discharge

F r > 1 Fr > 1 F r > 1 Supercritical (rapid) Shallow, fast; disturbances cannot travel upstream; control is upstream

Why the control section matters: in subcritical flow, downstream conditions propagate upstream and set the depth — which is why a weir or a downstream gate controls an upstream water surface. In supercritical flow they cannot, so upstream conditions govern. A hydraulic jump — an abrupt, highly turbulent rise in depth with substantial energy loss — is the only way flow transitions from supercritical to subcritical, and stilling basins are designed to force it deliberately.

Critical depth for a rectangular channel of width b b b carrying discharge Q Q Q , with q = Q / b q = Q/b q = Q / b : y c = ( q 2 g ) 1 / 3 y_c = \left(\frac{q^2}{g}\right)^{1/3} y c ​ = ( g q 2 ​ ) 1/3

At critical depth the specific energy is minimized: E min ⁡ = 3 2 y c E_{\min} = \frac{3}{2}y_c E m i n ​ = 2 3 ​ y c ​

Mach Number and Compressibility M a = V c , c = k R T Ma = \frac{V}{c}, \qquad c = \sqrt{kRT} M a = c V ​ , c = k RT ​

with k = c p / c v k = c_p/c_v k = c p ​ / c v ​ (1.4 for air) and R R R the specific gas constant (287 J/kg·K for air).

  • M a Ma M a Regime Treatment
  • M a < 0.3 Ma < 0.3 M a < 0.3 Incompressible Density change < ~5%; use Bernoulli
  • 0.3 < M a < 0.8 0.3 < Ma < 0.8 0.3 < M a < 0.8 Subsonic compressible Compressibility corrections required
  • M a ≈ 1 Ma \approx 1 M a ≈ 1 Transonic / sonic Choking at a throat
  • M a > 1 Ma > 1 M a > 1 Supersonic Shock waves; a converging nozzle cannot exceed M a = 1 Ma = 1 M a = 1

The M a = 0.3 Ma = 0.3 M a = 0.3 threshold is the practical dividing line for this exam. For air at 20 °C, c = 1.4 ( 287 ) ( 293 ) = 343 c = \sqrt{1.4(287)(293)} = 343 c = 1.4 ( 287 ) ( 293 ) ​ = 343 m/s, so M a = 0.3 Ma = 0.3 M a = 0.3 corresponds to about 103 m/s (230 mph) . Below that, treating air as incompressible introduces less than 5% error — which is why ventilation, HVAC, and most fan problems use incompressible relations even though air is a gas.

Dynamic Similarity in Model Testing

Two flows are dynamically similar when they are geometrically similar and the governing dimensionless group matches. The essential judgment is which group to match :

  • Application Dominant force Match
  • Pipe flow, submerged bodies, valves Viscous Reynolds
  • Open channels, spillways, ship hulls (wave drag) Gravity Froude
  • High-speed gas flow, aerofoils near sonic Compressibility Mach

Droplet formation, atomization Surface tension Weber R e m = R e p ⇒ V m L m ν m = V p L p ν p F r m = F r p ⇒ V m g L m = V p g L p Re_m = Re_p \;\Rightarrow\; \frac{V_m L_m}{\nu_m} = \frac{V_p L_p}{\nu_p} \qquad\qquad Fr_m = Fr_p \;\Rightarrow\; \frac{V_m}{\sqrt{gL_m}} = \frac{V_p}{\sqrt{gL_p}} R e m ​ = R e p ​ ⇒ ν m ​ V m ​ L m ​ ​ = ν p ​ V p ​ L p ​ ​ F r m ​ = F r p ​ ⇒ g L m ​ ​ V m ​ ​ = g L p ​ ​ V p ​ ​

The classic conflict: a ship model must match Froude for wave drag, giving V m = V p L m / L p V_m = V_p\sqrt{L_m/L_p} V m ​ = V p ​ L m ​ / L p ​ ​ — a slower model. But matching Reynolds for viscous drag requires V m = V p ( L p / L m ) V_m = V_p(L_p/L_m) V m ​ = V p ​ ( L p ​ / L m ​ ) with the same fluid — a much faster model. Both cannot be satisfied at once in the same fluid. Naval practice matches Froude and corrects the viscous component analytically. If an exam item asks which to match, identify the dominant force: a free surface means Froude.

Worked Example: Spillway Model Scaling

A spillway model is built at 1:25 scale. The prototype discharge is 900 m³/s. Find the model velocity ratio and the required model discharge.

Free-surface, gravity-driven flow → match Froude number : V m g L m = V p g L p ⇒ V m V p = L m L p = 1 25 = 1 5 \frac{V_m}{\sqrt{gL_m}} = \frac{V_p}{\sqrt{gL_p}} \;\Rightarrow\; \frac{V_m}{V_p} = \sqrt{\frac{L_m}{L_p}} = \sqrt{\frac{1}{25}} = \frac{1}{5} g L m ​ ​ V m ​ ​ = g L p ​ ​ V p ​ ​ ⇒ V p ​ V m ​ ​ = L p ​ L m ​ ​ ​ = 25 1 ​ ​ = 5 1 ​

The model runs at one-fifth the prototype velocity. Discharge scales as velocity × area, and area scales as length squared: Q m Q p = V m V p × A m A p = 1 5 × 1 625 = 1 3,125 = ( 1 25 ) 5 / 2 \frac{Q_m}{Q_p} = \frac{V_m}{V_p}\times\frac{A_m}{A_p} = \frac{1}{5}\times\frac{1}{625} = \frac{1}{3{,}125} = \left(\frac{1}{25}\right)^{5/2} Q p ​ Q m ​ ​ = V p ​ V m ​ ​ × A p ​ A m ​ ​ = 5 1 ​ × 625 1 ​ = 3 , 125 1 ​ = ( 25 1 ​ ) 5/2 Q m = 900 3,125 = 0.288 m 3 / s Q_m = \frac{900}{3{,}125} = \boxed{0.288\ \text{m}^3/\text{s}} Q m ​ = 3 , 125 900 ​ = 0.288 m 3 / s ​

The L 5 / 2 L^{5/2} L 5/2 discharge scaling is the signature of Froude similarity and is worth recognizing directly. Note also that the model's Reynolds number is only 1 5 × 1 25 = 1 125 \frac{1}{5}\times\frac{1}{25} = \frac{1}{125} 5 1 ​ × 25 1 ​ = 125 1 ​ of the prototype's — so viscous effects are badly exaggerated in the model, which is exactly why models must be built large enough to remain turbulent.