Study guide
12.4 Impulse-Momentum Equation and Forces on Control Volumes
FE Other Disciplines Fundamentals of Engineering
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Strategy
About the FE Other Disciplines Exam How to Use This Study Guide
2 Chapter 1: Mathematics
1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration
3 Chapter 2: Probability and Statistics
2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression
4 Chapter 3: Chemistry
3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics
5 Chapter 4: Instrumentation and Controls
4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic
6 Chapter 5: Engineering Ethics and Societal Impacts
5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety
7 Chapter 6: Safety, Health, and Environment
6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates
8 Chapter 7: Engineering Economics
7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees
9 Chapter 8: Statics
8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c
10 Chapter 9: Dynamics
9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping
11 Chapter 10: Strength of Materials
10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria
12 Chapter 11: Materials
11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design
13 Chapter 12: Fluid Mechanics
12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law
14 Chapter 13: Basic Electrical Engineering
13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter
15 Chapter 14: Thermodynamics and Heat Transfer
14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart
12.4 Impulse-Momentum Equation and Forces on Control Volumes
Key Takeaways Explain This Topic AI
NCEES lists energy, impulse, and momentum equations as one Fluid Mechanics sub-topic, so the momentum equation is examinable alongside Bernoulli's equation.
The steady-flow momentum equation states that the sum of external forces equals mass flow rate times the change in velocity, applied separately in each direction.
Momentum is a vector equation, so a pipe bend generates a reaction force even when the speed is unchanged, because the direction changed.
The momentum equation applies even when energy is dissipated, which is why it works across a sudden expansion or a hydraulic jump where Bernoulli's equation fails.
A jet striking a stationary flat plate normally exerts a force of rho Q V, and a 180-degree deflection doubles that force.
Last updated: August 2026
12.4 Impulse-Momentum Equation and Forces on Control Volumes
The NCEES sub-topic is "Energy, impulse, and momentum equations (e.g., Bernoulli equation)." The energy half is covered in the continuity and Bernoulli section; this section covers the momentum half, which answers a different question: not how fast the fluid moves, but what force it exerts on the hardware . Anchor blocks, thrust blocks, nozzle reactions, and turbine blade forces are all momentum problems.
The Steady-Flow Momentum Equation ∑ F ⃗ = m ˙ ( V ⃗ out − V ⃗ in ) , m ˙ = ρ Q = ρ A V \sum \vec{F} = \dot{m}\left(\vec{V}_{\text{out}} - \vec{V}_{\text{in}}\right), \qquad \dot{m} = \rho Q = \rho A V ∑ F = m ˙ ( V out − V in ) , m ˙ = ρQ = ρ A V
Applied component by component: ∑ F x = m ˙ ( V 2 x − V 1 x ) , ∑ F y = m ˙ ( V 2 y − V 1 y ) \sum F_x = \dot{m}(V_{2x} - V_{1x}), \qquad \sum F_y = \dot{m}(V_{2y} - V_{1y}) ∑ F x = m ˙ ( V 2 x − V 1 x ) , ∑ F y = m ˙ ( V 2 y − V 1 y )
The forces on the left side include every external force on the control volume:
- Force Expression Note
- Pressure at inlet + p 1 A 1 +p_1A_1 + p 1 A 1 Acts into the control volume, along the inlet flow direction
Pressure at outlet − p 2 A 2 -p_2A_2 − p 2 A 2 Acts into the control volume, against the outlet flow direction
- Reaction from the structure R x , R y R_x, R_y R x , R y Usually the unknown you are solving for
- Weight of contained fluid − W -W − W Often neglected for short fittings
Use gauge pressures. Atmospheric pressure acts uniformly on the outside of the fitting and cancels, so working in gauge pressure automatically accounts for it. Mixing absolute and gauge is a reliable way to get a wrong anchor force.
Why Momentum Succeeds Where Bernoulli Fails
- Bernoulli / energy equation Momentum equation
- Nature Scalar Vector
- Valid with energy loss? No (unless a loss term is added) Yes, always
- Gives you Pressures and velocities Forces
- Needs internal detail? Yes, to quantify losses No — only inlet and outlet conditions
This is the key insight of the topic. Across a sudden expansion , a hydraulic jump , or a partly closed valve , the internal flow is violently turbulent and energy is destroyed in ways you cannot compute from geometry. Bernoulli's equation is invalid there. The momentum equation does not care: it needs only what crosses the control surface, so it works across the most dissipative device imaginable. When a question asks for a force across a lossy transition, momentum is the only usable tool.
Forces on Pipe Bends
For a bend turning flow through angle θ \theta θ in the horizontal plane, with the inlet along + x +x + x : R x = m ˙ ( V 2 cos θ − V 1 ) − p 1 A 1 + p 2 A 2 cos θ R_x = \dot{m}(V_2\cos\theta - V_1) - p_1A_1 + p_2A_2\cos\theta R x = m ˙ ( V 2 cos θ − V 1 ) − p 1 A 1 + p 2 A 2 cos θ R y = m ˙ ( V 2 sin θ − 0 ) + p 2 A 2 sin θ R_y = \dot{m}(V_2\sin\theta - 0) + p_2A_2\sin\theta R y = m ˙ ( V 2 sin θ − 0 ) + p 2 A 2 sin θ
A bend generates force even at constant speed. In a constant-diameter bend V 1 = V 2 V_1 = V_2 V 1 = V 2 in magnitude , so nothing changes energetically — yet the momentum vector rotates, and that requires a force. This is why a 90° elbow in a large water main needs a thrust block even though the pressure and velocity are the same on both sides.
Worked Example: Anchor Force on a 90° Reducing Bend
A horizontal 90° bend reduces from D 1 = 300 D_1 = 300 D 1 = 300 mm to D 2 = 200 D_2 = 200 D 2 = 200 mm. Water ( ρ = 1,000 \rho = 1{,}000 ρ = 1 , 000 kg/m³) flows at Q = 0.15 Q = 0.15 Q = 0.15 m³/s. Inlet gauge pressure is 250 kPa; outlet gauge pressure is 220 kPa. Inlet flow is along + x +x + x , outlet along + y +y + y . Find the anchoring force.
Areas and velocities: A 1 = π ( 0.300 ) 2 4 = 0.07069 m 2 , V 1 = 0.15 0.07069 = 2.122 m/s A_1 = \frac{\pi(0.300)^2}{4} = 0.07069\ \text{m}^2, \qquad V_1 = \frac{0.15}{0.07069} = 2.122\ \text{m/s} A 1 = 4 π ( 0.300 ) 2 = 0.07069 m 2 , V 1 = 0.07069 0.15 = 2.122 m/s A 2 = π ( 0.200 ) 2 4 = 0.03142 m 2 , V 2 = 0.15 0.03142 = 4.775 m/s A_2 = \frac{\pi(0.200)^2}{4} = 0.03142\ \text{m}^2, \qquad V_2 = \frac{0.15}{0.03142} = 4.775\ \text{m/s} A 2 = 4 π ( 0.200 ) 2 = 0.03142 m 2 , V 2 = 0.03142 0.15 = 4.775 m/s m ˙ = ρ Q = 1,000 ( 0.15 ) = 150 kg/s \dot{m} = \rho Q = 1{,}000(0.15) = 150\ \text{kg/s} m ˙ = ρQ = 1 , 000 ( 0.15 ) = 150 kg/s
x x x direction (outlet has no x x x velocity, and θ = 90 ° \theta = 90° θ = 90° so cos θ = 0 \cos\theta = 0 cos θ = 0 ): R x + p 1 A 1 = m ˙ ( 0 − V 1 ) R_x + p_1A_1 = \dot{m}(0 - V_1) R x + p 1 A 1 = m ˙ ( 0 − V 1 ) R x = − m ˙ V 1 − p 1 A 1 = − 150 ( 2.122 ) − 250,000 ( 0.07069 ) R_x = -\dot{m}V_1 - p_1A_1 = -150(2.122) - 250{,}000(0.07069) R x = − m ˙ V 1 − p 1 A 1 = − 150 ( 2.122 ) − 250 , 000 ( 0.07069 ) R x = − 318.3 − 17,672 = − 17,990 N R_x = -318.3 - 17{,}672 = -17{,}990\ \text{N} R x = − 318.3 − 17 , 672 = − 17 , 990 N
y y y direction (inlet has no y y y velocity): R y − p 2 A 2 = m ˙ ( V 2 − 0 ) R_y - p_2A_2 = \dot{m}(V_2 - 0) R y − p 2 A 2 = m ˙ ( V 2 − 0 ) R y = m ˙ V 2 + p 2 A 2 = 150 ( 4.775 ) + 220,000 ( 0.03142 ) R_y = \dot{m}V_2 + p_2A_2 = 150(4.775) + 220{,}000(0.03142) R y = m ˙ V 2 + p 2 A 2 = 150 ( 4.775 ) + 220 , 000 ( 0.03142 ) R y = 716.3 + 6,912 = 7,628 N R_y = 716.3 + 6{,}912 = 7{,}628\ \text{N} R y = 716.3 + 6 , 912 = 7 , 628 N
Resultant: R = ( 17,990 ) 2 + ( 7,628 ) 2 = 3.236 × 10 8 + 5.819 × 10 7 = 3.818 × 10 8 = 19,540 N ≈ 19.5 kN R = \sqrt{(17{,}990)^2 + (7{,}628)^2} = \sqrt{3.236\times10^8 + 5.819\times10^7} = \sqrt{3.818\times10^8} = \boxed{19{,}540\ \text{N} \approx 19.5\ \text{kN}} R = ( 17 , 990 ) 2 + ( 7 , 628 ) 2 = 3.236 × 1 0 8 + 5.819 × 1 0 7 = 3.818 × 1 0 8 = 19 , 540 N ≈ 19.5 kN ϕ = arctan ( 7,628 17,990 ) = 23.0 ° from the − x axis \phi = \arctan\!\left(\frac{7{,}628}{17{,}990}\right) = 23.0° \text{ from the } -x \text{ axis} ϕ = arctan ( 17 , 990 7 , 628 ) = 23.0° from the − x axis
Note the dominance of the pressure terms. The momentum flux contributions are only 318 N and 716 N, while the pressure-area terms are 17{,}672 N and 6{,}912 N — over 20 times larger . For pressurized liquid systems, the anchor force is essentially a pressure-times-area problem, and neglecting the momentum flux entirely would introduce under 5% error. The reverse is true for high-velocity, low-pressure jets, where momentum flux dominates. Recognizing which regime you are in is a fast sanity check on the magnitude of your answer.
Jets Striking Surfaces
For a jet of area A A A and velocity V V V , with m ˙ = ρ A V = ρ Q \dot{m} = \rho A V = \rho Q m ˙ = ρ A V = ρQ :
- Target Force on the target
- Stationary flat plate, normal to jet F = ρ Q V = ρ A V 2 F = \rho Q V = \rho A V^2 F = ρQ V = ρ A V 2
Stationary plate inclined at θ \theta θ to the jet F normal = ρ Q V sin θ F_{\text{normal}} = \rho Q V\sin\theta F normal = ρQ V sin θ
Stationary curved vane, 180° reversal F = 2 ρ Q V F = 2\rho Q V F = 2 ρQ V
Curved vane deflecting through θ \theta θ F x = ρ Q V ( 1 − cos θ ) F_x = \rho Q V(1-\cos\theta) F x = ρQ V ( 1 − cos θ )
- Plate moving away at u u u F = ρ A ( V − u ) 2 F = \rho A(V-u)^2 F = ρ A ( V − u ) 2
- Series of vanes (turbine wheel) moving at u u u F = ρ A V ( V − u ) F = \rho A V(V-u) F = ρ A V ( V − u )
The 180° result is worth remembering: reversing a jet gives twice the force of stopping it, because the momentum change is from + V +V + V to − V -V − V , a total of 2 V 2V 2 V . This is the principle of the Pelton turbine bucket, and it is why the buckets are split to turn the jet nearly back on itself.
Worked Example: Jet on a Moving Vane and Maximum Power
A 40 mm diameter water jet at 30 m/s strikes a single vane that deflects it 180° and moves away at 12 m/s. Find the force and power, then the velocity that maximizes power. A = π ( 0.040 ) 2 4 = 1.257 × 10 − 3 m 2 A = \frac{\pi(0.040)^2}{4} = 1.257\times10^{-3}\ \text{m}^2 A = 4 π ( 0.040 ) 2 = 1.257 × 1 0 − 3 m 2
Relative velocity governs the interaction: V rel = 30 − 12 = 18 V_{\text{rel}} = 30 - 12 = 18 V rel = 30 − 12 = 18 m/s. F = 2 ρ A ( V − u ) 2 = 2 ( 1,000 ) ( 1.257 × 10 − 3 ) ( 18 ) 2 = 2 ( 1,000 ) ( 1.257 × 10 − 3 ) ( 324 ) = 814.6 N F = 2\rho A(V-u)^2 = 2(1{,}000)(1.257\times10^{-3})(18)^2 = 2(1{,}000)(1.257\times10^{-3})(324) = 814.6\ \text{N} F = 2 ρ A ( V − u ) 2 = 2 ( 1 , 000 ) ( 1.257 × 1 0 − 3 ) ( 18 ) 2 = 2 ( 1 , 000 ) ( 1.257 × 1 0 − 3 ) ( 324 ) = 814.6 N P = F u = 814.6 ( 12 ) = 9,775 W = 9.78 kW P = Fu = 814.6(12) = 9{,}775\ \text{W} = \boxed{9.78\ \text{kW}} P = F u = 814.6 ( 12 ) = 9 , 775 W = 9.78 kW
Maximizing power. With P = 2 ρ A ( V − u ) 2 u P = 2\rho A(V-u)^2u P = 2 ρ A ( V − u ) 2 u , differentiate with respect to u u u : d P d u = 2 ρ A [ ( V − u ) 2 − 2 u ( V − u ) ] = 2 ρ A ( V − u ) [ ( V − u ) − 2 u ] = 0 \frac{dP}{du} = 2\rho A\left[(V-u)^2 - 2u(V-u)\right] = 2\rho A(V-u)\left[(V-u) - 2u\right] = 0 d u d P = 2 ρ A [ ( V − u ) 2 − 2 u ( V − u ) ] = 2 ρ A ( V − u ) [ ( V − u ) − 2 u ] = 0 V − 3 u = 0 ⇒ u = V 3 = 10 m/s V - 3u = 0 \;\Rightarrow\; u = \frac{V}{3} = 10\ \text{m/s} V − 3 u = 0 ⇒ u = 3 V = 10 m/s P max = 2 ( 1,000 ) ( 1.257 × 10 − 3 ) ( 30 − 10 ) 2 ( 10 ) = 2 ( 1,000 ) ( 1.257 × 10 − 3 ) ( 400 ) ( 10 ) = 10,056 W = 10.06 kW P_{\max} = 2(1{,}000)(1.257\times10^{-3})(30-10)^2(10) = 2(1{,}000)(1.257\times10^{-3})(400)(10) = 10{,}056\ \text{W} = 10.06\ \text{kW} P m a x = 2 ( 1 , 000 ) ( 1.257 × 1 0 − 3 ) ( 30 − 10 ) 2 ( 10 ) = 2 ( 1 , 000 ) ( 1.257 × 1 0 − 3 ) ( 400 ) ( 10 ) = 10 , 056 W = 10.06 kW
So u = V / 3 u = V/3 u = V /3 for a single vane, giving 10.06 kW versus 9.78 kW at 12 m/s — only 3% better, showing the optimum is quite flat.
A caution the exam exploits: for a series of vanes on a turbine wheel, where the jet is continuously intercepted, the force is ρ A V ( V − u ) \rho AV(V-u) ρ A V ( V − u ) rather than ρ A ( V − u ) 2 \rho A(V-u)^2 ρ A ( V − u ) 2 , and the optimum shifts to u = V / 2 u = V/2 u = V /2 with 50% theoretical efficiency for a flat vane. The V / 2 V/2 V /2 result is the one usually quoted for Pelton wheels. Read whether the problem describes one vane or a wheel.