Study guide

14.5 Mass and Energy Balances on Control Volumes

FE Other Disciplines Fundamentals of Engineering

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Strategy

About the FE Other Disciplines Exam How to Use This Study Guide

2 Chapter 1: Mathematics

1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration

3 Chapter 2: Probability and Statistics

2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression

4 Chapter 3: Chemistry

3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics

5 Chapter 4: Instrumentation and Controls

4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic

6 Chapter 5: Engineering Ethics and Societal Impacts

5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety

7 Chapter 6: Safety, Health, and Environment

6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates

8 Chapter 7: Engineering Economics

7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees

9 Chapter 8: Statics

8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c

10 Chapter 9: Dynamics

9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping

11 Chapter 10: Strength of Materials

10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria

12 Chapter 11: Materials

11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design

13 Chapter 12: Fluid Mechanics

12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law

14 Chapter 13: Basic Electrical Engineering

13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter

15 Chapter 14: Thermodynamics and Heat Transfer

14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart

14.5 Mass and Energy Balances on Control Volumes

Key Takeaways Explain This Topic AI

NCEES lists mass and energy balances as a sub-topic of Thermodynamics and Heat Transfer, so it is examined as bookkeeping on a control volume.

At steady state, mass in equals mass out, and for a single-inlet single-outlet device rho1 A1 V1 = rho2 A2 V2.

The steady-flow energy equation sets heat added plus enthalpy in equal to work done plus enthalpy out, with kinetic and potential terms usually negligible.

Mixing two streams gives an outlet enthalpy that is the mass-weighted average of the inlet enthalpies, not the simple average.

For a transient tank, accumulation equals mass in minus mass out, so the rate of change of contents is what a steady-state balance sets to zero.

Last updated: August 2026

14.5 Mass and Energy Balances on Control Volumes

NCEES lists "Mass and energy balances" under Thermodynamics and Heat Transfer. It is the most transferable skill in the entire specification: the same bookkeeping structure appears in fluid mechanics continuity, chemistry stoichiometry, safety dilution ventilation, and thermodynamic device analysis. Learn the template once and it covers items in four different areas of the exam.

The General Balance Equation

For any conserved quantity over any control volume: IN ⏟ across the boundary − OUT ⏟ across the boundary + GENERATION ⏟ inside − CONSUMPTION ⏟ inside = ACCUMULATION ⏟ rate of change of contents \underbrace{\text{IN}}_{\text{across the boundary}} - \underbrace{\text{OUT}}_{\text{across the boundary}} + \underbrace{\text{GENERATION}}_{\text{inside}} - \underbrace{\text{CONSUMPTION}}_{\text{inside}} = \underbrace{\text{ACCUMULATION}}_{\text{rate of change of contents}} across the boundary IN ​ ​ − across the boundary OUT ​ ​ + inside GENERATION ​ ​ − inside CONSUMPTION ​ ​ = rate of change of contents ACCUMULATION ​ ​

Two simplifications carry most exam problems:

  • Condition Consequence
  • Steady state Accumulation = 0 = 0 = 0 , so IN = = = OUT (plus any net generation)
  • No reaction Generation = = = consumption = 0 = 0 = 0 for total mass and for each species

Total mass is never generated or consumed — even in a chemical reaction. Only species masses and moles can change. Total mass in equals total mass out at steady state, always, which makes it the most reliable equation available for checking an answer.

Steady-State Mass Balance ∑ m ˙ in = ∑ m ˙ out \sum \dot{m}_{\text{in}} = \sum \dot{m}_{\text{out}} ∑ m ˙ in ​ = ∑ m ˙ out ​

For a single-inlet, single-outlet device, with m ˙ = ρ A V \dot{m} = \rho A V m ˙ = ρ A V : ρ 1 A 1 V 1 = ρ 2 A 2 V 2 \rho_1A_1V_1 = \rho_2A_2V_2 ρ 1 ​ A 1 ​ V 1 ​ = ρ 2 ​ A 2 ​ V 2 ​

and for incompressible flow, where ρ \rho ρ cancels: A 1 V 1 = A 2 V 2 = Q A_1V_1 = A_2V_2 = Q A 1 ​ V 1 ​ = A 2 ​ V 2 ​ = Q

Worked Example: Mixing Two Streams

A mixing tee receives 4.0 kg/s of water at 15 °C and 1.5 kg/s at 80 °C. Find the outlet flow and temperature, taking c p = 4.18 c_p = 4.18 c p ​ = 4.18 kJ/kg·K as constant.

Mass balance: m ˙ 3 = 4.0 + 1.5 = 5.5 kg/s \dot{m}_3 = 4.0 + 1.5 = 5.5\ \text{kg/s} m ˙ 3 ​ = 4.0 + 1.5 = 5.5 kg/s

Energy balance (adiabatic, no work, negligible kinetic and potential terms): m ˙ 1 h 1 + m ˙ 2 h 2 = m ˙ 3 h 3 \dot{m}_1h_1 + \dot{m}_2h_2 = \dot{m}_3h_3 m ˙ 1 ​ h 1 ​ + m ˙ 2 ​ h 2 ​ = m ˙ 3 ​ h 3 ​

With constant c p c_p c p ​ , enthalpy differences are proportional to temperature differences, so: T 3 = m ˙ 1 T 1 + m ˙ 2 T 2 m ˙ 1 + m ˙ 2 = 4.0 ( 15 ) + 1.5 ( 80 ) 5.5 = 60 + 120 5.5 = 180 5.5 = 32.7 ° C T_3 = \frac{\dot{m}_1T_1 + \dot{m}_2T_2}{\dot{m}_1+\dot{m}_2} = \frac{4.0(15) + 1.5(80)}{5.5} = \frac{60 + 120}{5.5} = \frac{180}{5.5} = \boxed{32.7\ °\text{C}} T 3 ​ = m ˙ 1 ​ + m ˙ 2 ​ m ˙ 1 ​ T 1 ​ + m ˙ 2 ​ T 2 ​ ​ = 5.5 4.0 ( 15 ) + 1.5 ( 80 ) ​ = 5.5 60 + 120 ​ = 5.5 180 ​ = 32.7 ° C ​

The outlet is a mass-weighted average, not a simple average. The arithmetic mean of 15 and 80 is 47.5 °C — nearly 15 degrees too high — because the cold stream carries 2.7 times the mass. Any mixing problem whose answer sits at the midpoint of the two inlet temperatures has ignored the weighting.

The Steady-Flow Energy Equation Q ˙ − W ˙ = m ˙ [ ( h 2 − h 1 ) + V 2 2 − V 1 2 2 + g ( z 2 − z 1 ) ] \dot{Q} - \dot{W} = \dot{m}\left[(h_2-h_1) + \frac{V_2^2-V_1^2}{2} + g(z_2-z_1)\right] Q ˙ ​ − W ˙ = m ˙ [ ( h 2 ​ − h 1 ​ ) + 2 V 2 2 ​ − V 1 2 ​ ​ + g ( z 2 ​ − z 1 ​ ) ]

Sign convention: heat added to the system is positive; work done by the system is positive.

For most devices the kinetic and potential terms are negligible, and the equation collapses to a single useful form per device:

Device Simplification Result

Nozzle / diffuser Q ˙ = 0 \dot{Q}=0 Q ˙ ​ = 0 , W ˙ = 0 \dot{W}=0 W ˙ = 0 h 1 + V 1 2 2 = h 2 + V 2 2 2 h_1 + \dfrac{V_1^2}{2} = h_2 + \dfrac{V_2^2}{2} h 1 ​ + 2 V 1 2 ​ ​ = h 2 ​ + 2 V 2 2 ​ ​ — enthalpy converts to velocity

Turbine / compressor Q ˙ ≈ 0 \dot{Q}\approx 0 Q ˙ ​ ≈ 0 , Δ K E ≈ 0 \Delta KE \approx 0 Δ K E ≈ 0 W ˙ = m ˙ ( h 1 − h 2 ) \dot{W} = \dot{m}(h_1-h_2) W ˙ = m ˙ ( h 1 ​ − h 2 ​ )

Throttle / valve Q ˙ = 0 \dot{Q}=0 Q ˙ ​ = 0 , W ˙ = 0 \dot{W}=0 W ˙ = 0 , Δ K E ≈ 0 \Delta KE\approx 0 Δ K E ≈ 0 h 1 = h 2 h_1 = h_2 h 1 ​ = h 2 ​ — isenthalpic

Heat exchanger W ˙ = 0 \dot{W}=0 W ˙ = 0 Q ˙ = m ˙ ( h 2 − h 1 ) \dot{Q} = \dot{m}(h_2-h_1) Q ˙ ​ = m ˙ ( h 2 ​ − h 1 ​ ) per stream

Pump Incompressible W ˙ = m ˙ v ( p 2 − p 1 ) \dot{W} = \dot{m}v(p_2-p_1) W ˙ = m ˙ v ( p 2 ​ − p 1 ​ )

Mixing chamber Q ˙ = 0 \dot{Q}=0 Q ˙ ​ = 0 , W ˙ = 0 \dot{W}=0 W ˙ = 0 ∑ m ˙ i h i = m ˙ out h out \sum\dot{m}_ih_i = \dot{m}_{\text{out}}h_{\text{out}} ∑ m ˙ i ​ h i ​ = m ˙ out ​ h out ​

When kinetic energy actually matters. The V 2 / 2 V^2/2 V 2 /2 term is in J/kg, while enthalpy changes are typically in kJ/kg. A velocity of 45 m/s contributes 45 2 / 2 = 1,013 45^2/2 = 1{,}013 4 5 2 /2 = 1 , 013 J/kg = 1.0 = 1.0 = 1.0 kJ/kg — about 0.3% of a typical turbine's 300 kJ/kg enthalpy drop, so it is rightly neglected. But in a nozzle the entire purpose is velocity change, so it is the dominant term and must never be dropped. Judge by the device, not by habit.

Worked Example: Counter-Flow Heat Exchanger Balance

Hot oil ( c p = 2.10 c_p = 2.10 c p ​ = 2.10 kJ/kg·K) enters at 140 °C and 2.4 kg/s, leaving at 65 °C. It heats water ( c p = 4.18 c_p = 4.18 c p ​ = 4.18 kJ/kg·K) entering at 20 °C at 3.0 kg/s. Find the heat duty and the water outlet temperature.

Heat released by the oil: Q ˙ = m ˙ c p Δ T = 2.4 ( 2.10 ) ( 140 − 65 ) = 2.4 ( 2.10 ) ( 75 ) = 378 kW \dot{Q} = \dot{m}c_p\Delta T = 2.4(2.10)(140-65) = 2.4(2.10)(75) = \boxed{378\ \text{kW}} Q ˙ ​ = m ˙ c p ​ Δ T = 2.4 ( 2.10 ) ( 140 − 65 ) = 2.4 ( 2.10 ) ( 75 ) = 378 kW ​

Energy balance on the water (adiabatic exchanger, so all of it is absorbed): 378 = 3.0 ( 4.18 ) ( T out − 20 ) ⇒ T out − 20 = 378 12.54 = 30.1 378 = 3.0(4.18)(T_{\text{out}} - 20) \;\Rightarrow\; T_{\text{out}} - 20 = \frac{378}{12.54} = 30.1 378 = 3.0 ( 4.18 ) ( T out ​ − 20 ) ⇒ T out ​ − 20 = 12.54 378 ​ = 30.1 T out = 50.1 ° C T_{\text{out}} = \boxed{50.1\ °\text{C}} T out ​ = 50.1 ° C ​

Sanity check on the temperature approach: the water leaves at 50.1 °C against oil entering at 140 °C, and the water enters at 20 °C against oil leaving at 65 °C. Both approaches are positive (89.9 °C and 45 °C), so the second law is respected and the design is thermodynamically feasible. Any answer that puts a cold-stream outlet above the hot-stream inlet is impossible , and checking both ends of a counter-flow exchanger catches that error immediately.

Transient (Unsteady) Balances

When the contents change, the accumulation term survives: d m cv d t = ∑ m ˙ in − ∑ m ˙ out \frac{dm_{\text{cv}}}{dt} = \sum\dot{m}_{\text{in}} - \sum\dot{m}_{\text{out}} d t d m cv ​ ​ = ∑ m ˙ in ​ − ∑ m ˙ out ​

Worked Example: Tank Filling and Draining

A tank holds 800 kg of water. Inflow is 6.0 kg/s and outflow is 2.5 kg/s. How long until the tank holds 3{,}000 kg? d m d t = 6.0 − 2.5 = 3.5 kg/s \frac{dm}{dt} = 6.0 - 2.5 = 3.5\ \text{kg/s} d t d m ​ = 6.0 − 2.5 = 3.5 kg/s t = 3,000 − 800 3.5 = 2,200 3.5 = 629 s = 10.5 minutes t = \frac{3{,}000 - 800}{3.5} = \frac{2{,}200}{3.5} = \boxed{629\ \text{s} = 10.5\ \text{minutes}} t = 3.5 3 , 000 − 800 ​ = 3.5 2 , 200 ​ = 629 s = 10.5 minutes ​

Worked Example: Draining with a Concentration Change

A 5{,}000 L tank of brine at 40 g/L is flushed with fresh water at 20 L/min while the well-mixed contents drain at 20 L/min, holding the volume constant. Find the concentration after 90 minutes.

Species mass balance with no generation, outflow at the (well-mixed) tank concentration C C C : V d C d t = 0 − Q C ⇒ d C d t = − Q V C V\frac{dC}{dt} = 0 - QC \;\Rightarrow\; \frac{dC}{dt} = -\frac{Q}{V}C V d t d C ​ = 0 − QC ⇒ d t d C ​ = − V Q ​ C C ( t ) = C 0 e − Q t / V = 40 e − ( 20 / 5,000 ) ( 90 ) = 40 e − 0.36 = 40 ( 0.6977 ) = 27.9 g/L C(t) = C_0e^{-Qt/V} = 40\,e^{-(20/5{,}000)(90)} = 40\,e^{-0.36} = 40(0.6977) = \boxed{27.9\ \text{g/L}} C ( t ) = C 0 ​ e − Qt / V = 40 e − ( 20/5 , 000 ) ( 90 ) = 40 e − 0.36 = 40 ( 0.6977 ) = 27.9 g/L ​

The same exponential decay as radioactive half-life, Newton's law of cooling, and confined-space purge ventilation. The time constant is V / Q = 250 V/Q = 250 V / Q = 250 minutes, so 90 minutes is only 0.36 time constants — which is why the concentration has fallen just 30% despite flushing 1.8 tank volumes' worth of water through it. Flushing a well-mixed tank is exponential, not linear , and the intuitive "1.8 volumes means it's clean" reasoning is wrong.