Study guide
About the FE Other Disciplines Exam
FE Other Disciplines Fundamentals of Engineering
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Strategy
About the FE Other Disciplines Exam How to Use This Study Guide
2 Chapter 1: Mathematics
1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration
3 Chapter 2: Probability and Statistics
2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression
4 Chapter 3: Chemistry
3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics
5 Chapter 4: Instrumentation and Controls
4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic
6 Chapter 5: Engineering Ethics and Societal Impacts
5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety
7 Chapter 6: Safety, Health, and Environment
6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates
8 Chapter 7: Engineering Economics
7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees
9 Chapter 8: Statics
8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c
10 Chapter 9: Dynamics
9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping
11 Chapter 10: Strength of Materials
10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria
12 Chapter 11: Materials
11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design
13 Chapter 12: Fluid Mechanics
12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law
14 Chapter 13: Basic Electrical Engineering
13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter
15 Chapter 14: Thermodynamics and Heat Transfer
14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart
About the FE Other Disciplines Exam
Key Takeaways Explain This Topic AI
The FE Other Disciplines exam has 110 questions with 5 hours 20 minutes of answering time inside a 5-hour-55-minute total appointment (NCEES Examinee Guide).
The July 2020 specifications define 14 knowledge areas; Statics (9-14) and Dynamics (9-14) are separate areas and Thermodynamics and Heat Transfer (9-14) is a single combined area.
Fluid Mechanics is the largest single area at 12-18 questions, roughly 11-16% of the exam.
NCEES publishes no cut score and no equivalent raw percentage; the only official statistic is the 61% first-time pass rate reported in July 2026.
The exam is delivered in two sections, and once you submit the first section you permanently lose access to those questions, so never defer them past the break.
Last updated: August 2026
About the FE Other Disciplines Exam
Exam Overview: The Fundamentals of Engineering (FE) Other Disciplines examination is a computer-based test (CBT) administered year-round by the National Council of Examiners for Engineering and Surveying (NCEES). It is designed for engineering graduates whose degree programs do not align directly with the six named FE disciplines (Chemical, Civil, Electrical and Computer, Environmental, Industrial and Systems, Mechanical), as well as multi-disciplinary engineers moving toward Professional Engineer (PE) licensure. The governing document is the FE Other Disciplines CBT Exam Specifications, effective beginning with the July 2020 examinations .
Computer-Based Testing (CBT) Environment & Structure
The FE exam is delivered at NCEES-approved Pearson VUE test centers. Understanding the structure of the exam day is critical to managing test anxiety and optimizing pacing.
The appointment components below are taken directly from the exam table in the NCEES Examinee Guide :
- Exam Component Official Duration Description
- Nondisclosure Agreement 2 minutes Accept the NCEES nondisclosure and exam-security agreement
- Tutorial 8 minutes Walk-through of the testing interface and navigation controls
- Exam Time 5 hours 20 minutes (320 min) The only time that counts toward answering the 110 questions
- Scheduled Break 25 minutes Optional; taken after you submit approximately half the questions
- Total Appointment Time 5 hours 55 minutes Sum of the four components above
Reconciling "6 hours": The exam specifications sheet says examinees "have 6 hours to complete the exam," and NCEES marketing pages round the appointment to 6 hours. The Examinee Guide's exam table is more precise: 2 + 8 + 320 + 25 = 355 minutes = 5 h 55 min . What matters for pacing is that only 320 minutes are available for questions — the tutorial and break do not consume answering time, and unused break time is not added back to your exam clock.
Two Sections, One Timer, and the No-Return Rule
The exam is divided into two sections , but there are no individually timed sections — you are given the entire 5 h 20 min at the start and you manage it yourself. After you have seen approximately half of the questions (near the 55-question mark, though the exact split varies by form), you are prompted to review that set and then submit it.
You may review and change answers freely within the first section before submitting.
Once you click End Review and submit, you permanently lose access to those questions.
The optional 25-minute scheduled break is offered at that submission point.
Unscheduled breaks may be taken at any time, but the exam timer keeps running and you may not leave the building.
Practical consequence: never leave first-section questions blank "to come back later after the break." There is no coming back. Finish and guess on everything in section one before you submit it.
Split-Screen Interface and Pretest Items
During the examination your monitor is partitioned into a split-screen view: the searchable PDF of the NCEES FE Reference Handbook on one side, and the active question with its options, on-screen calculator, and navigation controls on the other.
NCEES also notes that all exams include a limited number of unscored pretest items that are randomly placed and not identifiable. You cannot tell which questions these are, so treat every item as scored.
Question Formats: Multiple-Choice and Alternative Item Types (AITs)
Most items are traditional four-option multiple-choice questions with choices labeled (A) through (D). NCEES confirms the computer-based FE also contains alternative item types (AITs) — "questions other than traditional multiple-choice questions." NCEES does not publish the proportion of AITs on any given form, so plan to be fluent in all of them:
Multiple Correct (Multiple Select): Choose every correct option from a longer list.
Fill-in-the-Blank (Numeric Entry): Type an exact numerical value. Read the requested units and rounding instructions carefully — there are no distractors to catch a unit slip.
Drag-and-Drop: Match terms to definitions, order the steps of a process, or place labels onto a figure.
Point-and-Click (Hotspot): Click directly on a region of a graph, diagram, or shear-and-moment diagram.
AIT trap: on numeric-entry items the four-option safety net disappears. Dimensional analysis (covered in the next section) is your only check.
Official NCEES FE Other Disciplines Knowledge Areas
The FE Other Disciplines exam covers 14 knowledge areas and 110 questions . The table below reproduces the official area names and question ranges from the FE Other Disciplines CBT Exam Specifications (effective July 2020) . Study to these names — they are also the row labels NCEES uses on the diagnostic report you receive if you do not pass.
- # Official Knowledge Area Number of Questions
- 1 Mathematics 8–12
- 2 Probability and Statistics 6–9
- 3 Chemistry 5–8
- 4 Instrumentation and Controls 4–6
- 5 Engineering Ethics and Societal Impacts 5–8
- 6 Safety, Health, and Environment 6–9
- 7 Engineering Economics 6–9
- 8 Statics 9–14
- 9 Dynamics 9–14
- 10 Strength of Materials 9–14
- 11 Materials 6–9
- 12 Fluid Mechanics 12–18
- 13 Basic Electrical Engineering 6–9
- 14 Thermodynamics and Heat Transfer 9–14
- How to Read Those Ranges
The ranges are counts of questions, not percentages , and their midpoints deliberately sum to more than 110 — NCEES varies the mix between forms, so no single form hits every midpoint. Convert a range to a weight by dividing by 110: Fluid Mechanics at 12–18 questions is roughly 11–16% of the exam , while Instrumentation and Controls at 4–6 questions is roughly 4–5% .
Where the Points Actually Are
- Tier Areas Questions Share of 110
- Heavy Fluid Mechanics; Statics; Dynamics; Strength of Materials; Thermodynamics and Heat Transfer 48–74 44–67%
Medium Mathematics; Probability and Statistics; Safety, Health, and Environment; Engineering Economics; Materials; Basic Electrical Engineering 42–62 38–56%
Light Chemistry; Engineering Ethics and Societal Impacts; Instrumentation and Controls 14–22 13–20%
Strategic Insight: the five "heavy" mechanics-and-energy areas alone can account for up to two-thirds of the exam, and Fluid Mechanics is the single largest area at 12–18 questions. But notice the flip side: the "light" tier is worth up to 22 questions, and Ethics, Safety, and Engineering Economics are the cheapest points on the exam per hour of study — they reward memorized rules and single-step formula work rather than multi-step derivation. A common failure pattern is over-investing in fluid mechanics derivations while conceding 20+ near-free points.
Two Structural Warnings
Statics and Dynamics are separate areas , each worth 9–14 questions — together 18–28 questions , the largest block on the exam. Many third-party summaries collapse them into one "Engineering Mechanics" topic and badly understate them.
Thermodynamics and Heat Transfer is one combined area worth 9–14 questions total, not two areas. If you have seen a breakdown listing separate "Thermodynamics" and "Heat Transfer" rows, or a separate "Advanced Engineering Mathematics" row, you are looking at a pre-2020 specification or a third-party reconstruction — the current spec has neither.
NCEES FE Reference Handbook Navigation Strategies
The NCEES FE Reference Handbook is the only resource available during the exam. Success depends as much on how fast you can find equations in the handbook as it does on your engineering knowledge.
Digital PDF Search Mastery
Use Exact Search Strings: Avoid searching for broad words like stress or energy which yield over 150 search hits. Search for specialized compound terms like Mohr's circle , Moody , Rankine , Fourier , or unsteadiness to instantly jump to the correct page.
Learn Section Headers: Understand how NCEES organizes the handbook. For instance, fluid dynamics equations are under FLUID MECHANICS , while capital recovery factors are under ENGINEERING ECONOMICS .
Verify Unit Conventions: The handbook contains formulas in both SI and US Customary units. Check constant definitions (such as the ideal gas constant R R R or gravitational acceleration g g g ) to avoid unit mismatches.
Worked Example: Pacing and Time Management Calculation
Problem: An examinee completes the first 55 questions in Section 1 in 2 hours and 45 minutes (165 minutes).
Calculate the examinee's average time per question in Section 1.
Determine the remaining time available per question for Section 2 (55 questions) to finish right at the 5-hour-and-20-minute (320-minute) exam deadline.
Solution:
Section 1 Average Pace: Pace 1 = 165 minutes 55 questions = 3.00 minutes/question \text{Pace}_1 = \frac{165 \text{ minutes}}{55 \text{ questions}} = 3.00 \text{ minutes/question} Pace 1 = 55 questions 165 minutes = 3.00 minutes/question
Section 2 Remaining Time: Time rem = 320 minutes − 165 minutes = 155 minutes \text{Time}_{\text{rem}} = 320 \text{ minutes} - 165 \text{ minutes} = 155 \text{ minutes} Time rem = 320 minutes − 165 minutes = 155 minutes Pace 2 = 155 minutes 55 questions ≈ 2.818 minutes/question ≈ 2.82 minutes/question \text{Pace}_2 = \frac{155 \text{ minutes}}{55 \text{ questions}} \approx 2.818 \text{ minutes/question} \approx 2.82 \text{ minutes/question} Pace 2 = 55 questions 155 minutes ≈ 2.818 minutes/question ≈ 2.82 minutes/question
Strategic Evaluation: Because the examinee spent 3.00 minutes per question on Section 1, they must accelerate their pace in Section 2 by about 11 seconds per problem (from 3.00 down to 2.82 minutes) to complete all questions before the exam timer expires.
- Scoring Methodology, Diagnostic Reports, and Retakes
- Scaled Scoring Model
NCEES does not grade the FE exam against a fixed raw percentage such as 70%. Scoring works as follows:
Raw score: the number of scored questions answered correctly. Unscored pretest items do not count.
Equating: psychometric adjustment so that different exam forms represent the same standard of competence, no matter which mix of items you received.
Pass/fail standard: your scaled result is compared against a criterion-referenced passing standard set by panels of licensed engineers. It is not a curve — you are not competing against other examinees in your testing window.
No penalty for guessing: wrong answers are not deducted. A blank is a guaranteed zero, while a four-option guess is worth about 25%.
On "what percent do I need?" NCEES does not publish the cut score, and it does not publish an equivalent raw percentage. Any specific figure you see quoted — 55%, 70%, "about 60%" — is third-party estimation, not an NCEES number. Treat the published pass rate as the only official statistic: as of July 2026, NCEES reports 61% for FE Other Disciplines first-time takers from EAC/ABET-accredited programs who tested within 12 months of graduation. That is the lowest first-time rate among the seven FE disciplines, which is consistent with the exam's breadth.
Results and the Diagnostic Report
Results are reported as Pass or Fail through your MyNCEES account, typically within 7–10 days for the FE. NCEES does not release your score to you when you pass.
If you do not pass, NCEES provides a diagnostic report that breaks your performance down by the 14 knowledge areas above, showing how you performed relative to the standard in each area. Use it to re-rank your study plan rather than restudying everything uniformly — but read it alongside the question counts, because a weak showing in a 4–6 question area matters far less than the same weakness in a 12–18 question area.
Retake Policy
NCEES policy allows up to three attempts in any 12-month period, with only one attempt per testing window , where a window is a calendar quarter (January–March, April–June, July–September, October–December). Individual state licensing boards may impose stricter limits or additional waiting requirements, so confirm your own board's rules before rebooking.
- Fact Official Value
- Questions 110
- Exam time 5 hours 20 minutes
- Total appointment 5 hours 55 minutes
- NCEES exam fee $225 (most U.S. jurisdictions; some Canadian/international jurisdictions differ)
- Availability Year-round at Pearson VUE
- Reference material Searchable NCEES FE Reference Handbook, supplied on screen
- Design standards supplied No
- Published cut score None — scaled, criterion-referenced
- First-time pass rate 61% (NCEES, July 2026)
- Retakes 3 per 12 months; 1 per calendar quarter