Study guide
How to Use This Study Guide
FE Other Disciplines Fundamentals of Engineering
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Strategy
About the FE Other Disciplines Exam How to Use This Study Guide
2 Chapter 1: Mathematics
1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration
3 Chapter 2: Probability and Statistics
2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression
4 Chapter 3: Chemistry
3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics
5 Chapter 4: Instrumentation and Controls
4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic
6 Chapter 5: Engineering Ethics and Societal Impacts
5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety
7 Chapter 6: Safety, Health, and Environment
6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates
8 Chapter 7: Engineering Economics
7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees
9 Chapter 8: Statics
8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c
10 Chapter 9: Dynamics
9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping
11 Chapter 10: Strength of Materials
10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria
12 Chapter 11: Materials
11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design
13 Chapter 12: Fluid Mechanics
12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law
14 Chapter 13: Basic Electrical Engineering
13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter
15 Chapter 14: Thermodynamics and Heat Transfer
14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart
How to Use This Study Guide
Key Takeaways Explain This Topic AI
NCEES permits calculators by model family: all Casio fx-115 and fx-991 models, all TI-30X and TI-36X models, and only the HP 33s and HP 35s.
Only 320 minutes are available for 110 questions, an average of 2.9 minutes each, so pacing discipline matters more than knowing every topic.
Dimensional analysis and consistent unit conversion are the primary defense against designed distractor options, and the only defense on numeric-entry items.
In US Customary work, Newton's second law needs the gravitational conversion factor g_c = 32.174 lbm-ft/(lbf-s^2).
Active recall, formula-location drills in the Reference Handbook, and a written error log outperform passive rereading.
Last updated: August 2026
How to Use This Study Guide
Preparation Philosophy: Passing the FE Other Disciplines exam requires more than passive reading. It demands a systematic, execution-oriented strategy combining core technical review, formula handbook familiarity, calculator optimization, and timed problem-solving endurance.
The Three-Phase Preparation Framework
To maximize study efficiency, structure your prep timeline into three distinct phases over a 10-to-12-week schedule (allocating 120–150 total study hours): +-----------------------------------------------------------------------+
- | THREE-PHASE PREPARATION ROADMAP |
- +-----------------------------------------------------------------------+
- | PHASE 1: Diagnostic & Foundation (Weeks 1-4) | 40-50 Hours |
- | * Assess baseline strengths/weaknesses across 14 subject areas |
- | * Review core formulas in NCEES Reference Handbook |
- | * Master fundamental engineering principles & definitions |
- +-----------------------------------------------------------------------+
- | PHASE 2: Targeted Problem Solving (Weeks 5-9) | 50-60 Hours |
- | * Solve 300+ exam-style numerical problems |
- | * Develop advanced calculator shortcuts (solvers, matrices, vectors)|
- | * Maintain a dedicated Error Tracking Log for wrong answers |
- +-----------------------------------------------------------------------+
- | PHASE 3: Timed Simulation & Refinement (Weeks 10-12) | 30-40 Hours |
- | * Complete two full-length 5h 20m timed practice exams |
- | * Replicate Pearson VUE testing environment (split-screen PDF) |
- | * Finalize pacing strategy and rapid handbook navigation |
- +-----------------------------------------------------------------------+
- Weekly Study Allocation Strategy
Divide your weekly study hours proportionally according to exam topic weights. For example, allocate twice as much study time to Fluid Mechanics (9–14 questions) as to Ethics & Professional Practice (4–6 questions).
NCEES-Approved Calculator Mastery & Tactical Workflows
Your calculator is your most important speed tool, and NCEES enforces a strict, model-family policy. The rule is not a list of individually blessed models — it is a naming rule, and anything outside it is confiscated at the door:
- Manufacturer Permitted Models (NCEES calculator policy)
- Casio All fx-115 and fx-991 models — the model name must contain fx-115 or fx-991
- Hewlett Packard The HP 33s and HP 35s only, and no others
- Texas Instruments All TI-30X and TI-36X models — the model name must contain TI-30X or TI-36X
Do not improvise. A Casio fx-991EX and fx-991CW both qualify because they contain fx-991 ; a Casio fx-570 does not. A TI-36X Pro qualifies; a TI-84 does not. The HP rule is the narrowest of the three — only those two specific HP models are allowed. Verify your exact model name against the current policy page before exam day, and bring a permitted backup: a dead calculator is not grounds for extra time.
Advanced Calculator Functions to Master
Polynomial Solvers: Solve quadratic ( a x 2 + b x + c = 0 ax^2 + bx + c = 0 a x 2 + b x + c = 0 ) and cubic equations instantly instead of grinding the quadratic formula.
Simultaneous Linear Systems: Solve 2 × 2 2\times2 2 × 2 and 3 × 3 3\times3 3 × 3 systems directly — essential for truss joint equilibrium and Kirchhoff loop equations.
Vector Analysis: Store 3-D vectors to compute dot products (for work and for projections) and cross products (for moments in Statics).
Complex Number Arithmetic: Convert rectangular ( a + b j a + bj a + bj ) to polar ( r ∠ θ r\angle\theta r ∠ θ ) in one keystroke for AC impedance work.
Statistics and Linear Regression: Get x ˉ \bar{x} x ˉ , sample standard deviation s s s , and the regression line y = a x + b y = ax + b y = a x + b with correlation r r r directly from a data table.
Numerical Integration: Evaluate definite integrals ∫ a b f ( x ) d x \int_a^b f(x)\,dx ∫ a b f ( x ) d x for centroids, work, and probability.
Worked Example: Utilizing Calculator Vector Cross-Products
Problem: A force vector F ⃗ = 20 i ^ − 15 j ^ + 30 k ^ lbf \vec{F} = 20\hat{i} - 15\hat{j} + 30\hat{k} \text{ lbf} F = 20 i ^ − 15 j ^ + 30 k ^ lbf acts at a point defined by position vector r ⃗ = 4 i ^ + 2 j ^ − 5 k ^ ft \vec{r} = 4\hat{i} + 2\hat{j} - 5\hat{k} \text{ ft} r = 4 i ^ + 2 j ^ − 5 k ^ ft relative to the origin. Calculate the moment vector M ⃗ = r ⃗ × F ⃗ \vec{M} = \vec{r} \times \vec{F} M = r × F about the origin.
Manual Determinant Setup vs. Calculator Execution: M ⃗ = ∣ i ^ j ^ k ^ 4 2 − 5 20 − 15 30 ∣ \vec{M} = \begin{vmatrix} \hat{i} & \hat{j} & \hat{k} \\ 4 & 2 & -5 \\ 20 & -15 & 30 \end{vmatrix} M = i ^ 4 20 j ^ 2 − 15 k ^ − 5 30 M x = ( 2 ) ( 30 ) − ( − 5 ) ( − 15 ) = 60 − 75 = − 15 lbf ⋅ ft M_x = (2)(30) - (-5)(-15) = 60 - 75 = -15 \text{ lbf}\cdot\text{ft} M x = ( 2 ) ( 30 ) − ( − 5 ) ( − 15 ) = 60 − 75 = − 15 lbf ⋅ ft M y = − [ ( 4 ) ( 30 ) − ( − 5 ) ( 20 ) ] = − [ 120 + 100 ] = − 220 lbf ⋅ ft M_y = -[(4)(30) - (-5)(20)] = -[120 + 100] = -220 \text{ lbf}\cdot\text{ft} M y = − [( 4 ) ( 30 ) − ( − 5 ) ( 20 )] = − [ 120 + 100 ] = − 220 lbf ⋅ ft M z = ( 4 ) ( − 15 ) − ( 2 ) ( 20 ) = − 60 − 40 = − 100 lbf ⋅ ft M_z = (4)(-15) - (2)(20) = -60 - 40 = -100 \text{ lbf}\cdot\text{ft} M z = ( 4 ) ( − 15 ) − ( 2 ) ( 20 ) = − 60 − 40 = − 100 lbf ⋅ ft M ⃗ = − 15 i ^ − 220 j ^ − 100 k ^ lbf ⋅ ft \vec{M} = -15\hat{i} - 220\hat{j} - 100\hat{k} \text{ lbf}\cdot\text{ft} M = − 15 i ^ − 220 j ^ − 100 k ^ lbf ⋅ ft
Calculator shortcut: storing [ 4 , 2 , − 5 ] [4, 2, -5] [ 4 , 2 , − 5 ] and [ 20 , − 15 , 30 ] [20, -15, 30] [ 20 , − 15 , 30 ] as vectors and executing the cross-product function returns [ − 15 , − 220 , − 100 ] [-15, -220, -100] [ − 15 , − 220 , − 100 ] in seconds and eliminates the sign errors that determinant expansion invites.
Dimensional Analysis, Unit Conversions, and Common Exam Traps
A primary cause of lost points on the FE exam is not conceptual failure, but unit conversion mistakes or falling for designed distractors (trap options).
US Customary Force vs. Mass Distinction ( g c g_c g c )
In US Customary units, force is expressed in pounds-force ( lbf \text{lbf} lbf ) and mass in pounds-mass ( lbm \text{lbm} lbm ) or slugs. Newton's Second Law requires the gravitational conversion factor g c = 32.174 lbm ⋅ ft lbf ⋅ s 2 g_c = 32.174 \frac{\text{lbm}\cdot\text{ft}}{\text{lbf}\cdot\text{s}^2} g c = 32.174 lbf ⋅ s 2 lbm ⋅ ft : F = m ⋅ a g c F = \frac{m \cdot a}{g_c} F = g c m ⋅ a
Key Trap: Forgetting g c g_c g c when calculating kinetic energy ( K E = m v 2 2 g c KE = \frac{m v^2}{2 g_c} K E = 2 g c m v 2 ), potential energy ( P E = m g h g c PE = \frac{m g h}{g_c} PE = g c m g h ), or fluid pressure drops in US Customary units.
Summary of Common Distractor Traps on the FE Exam
Engineering Topic Common Distractor Trap Corrective Action
Thermodynamics Using relative temperature (°C or °F) in ideal gas law P V = m R T PV = mRT P V = m RT Always convert to absolute temperature ( Kelvin or Rankine )
Fluid Mechanics Confusing gauge pressure ( P gauge P_{\text{gauge}} P gauge ) and absolute pressure ( P abs P_{\text{abs}} P abs ) P abs = P gauge + P atm P_{\text{abs}} = P_{\text{gauge}} + P_{\text{atm}} P abs = P gauge + P atm (Standard P atm = 101.325 kPa P_{\text{atm}} = 101.325 \text{ kPa} P atm = 101.325 kPa or 14.696 psia 14.696 \text{ psia} 14.696 psia )
Strength of Materials Mixing radius ( r r r ) and diameter ( D D D ) in polar moment of inertia J J J Verify formula: J = π D 4 32 = π r 4 2 J = \frac{\pi D^4}{32} = \frac{\pi r^4}{2} J = 32 π D 4 = 2 π r 4
Trigonometry Calculator set to Radians instead of Degrees (or vice versa) Check calculator mode header before every geometry or AC circuit problem
Engineering Economics Confusing nominal interest rate ( r r r ) and effective annual rate ( i e i_e i e ) Use i e = ( 1 + r / m ) m − 1 i_e = (1 + r/m)^m - 1 i e = ( 1 + r / m ) m − 1 where m m m is compounding frequency per year
- Active Learning Techniques, Error Logs, and Exam-Day Strategy
- Building an Error Tracking Log
Every time you solve a practice problem incorrectly, record it in an Error Log with four fields:
Problem Identifier & Topic: (e.g., Chapter 5 - Fluid Mechanics, Pipe Flow)
Root Cause Category:
- Category A: Conceptual gap (didn't know principle)
- Category B: Formula misapplication (used wrong handbook equation)
- Category C: Unit / Arithmetic / Calculator input error
- Category D: Misread problem statement
Correct Mathematical Solution: Step-by-step derivation.
Prevention Rule: A one-sentence rule to avoid repeating the mistake (e.g., "Always convert pressure from kPa to Pa before entering into density equations").
The Three-Pass Exam Execution Strategy
On exam day, execute a disciplined Three-Pass Strategy within each 55-question section:
Pass 1 (First 45–60 Minutes): Read through questions sequentially. Instantly solve definition, conceptual, and quick 1-step calculation problems (< 1.5 minutes). If a problem requires multi-step derivation or looks complex, FLAG IT immediately and move on.
Pass 2 (Next 60–80 Minutes): Return to flagged problems. Work through calculations using your calculator and handbook. Take time to verify unit consistency.
Pass 3 (Final 10–15 Minutes): Review remaining un-answered or flagged items. Ensure every single question has a selected answer . Never leave a question blank!