Study guide
11.4 Electrical and Chemical Properties of Materials
FE Other Disciplines Fundamentals of Engineering
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Strategy
About the FE Other Disciplines Exam How to Use This Study Guide
2 Chapter 1: Mathematics
1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration
3 Chapter 2: Probability and Statistics
2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression
4 Chapter 3: Chemistry
3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics
5 Chapter 4: Instrumentation and Controls
4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic
6 Chapter 5: Engineering Ethics and Societal Impacts
5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety
7 Chapter 6: Safety, Health, and Environment
6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates
8 Chapter 7: Engineering Economics
7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees
9 Chapter 8: Statics
8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c
10 Chapter 9: Dynamics
9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping
11 Chapter 10: Strength of Materials
10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria
12 Chapter 11: Materials
11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design
13 Chapter 12: Fluid Mechanics
12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law
14 Chapter 13: Basic Electrical Engineering
13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter
15 Chapter 14: Thermodynamics and Heat Transfer
14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart
11.4 Electrical and Chemical Properties of Materials
Key Takeaways Explain This Topic AI
NCEES lists electrical properties and chemical properties of materials as separate Materials sub-topics.
Resistance is resistivity times length divided by area, and resistivity spans more than twenty orders of magnitude from copper to fused quartz.
Metals have a positive temperature coefficient of resistivity so their resistance rises with temperature, while semiconductors have a negative coefficient.
Doping a semiconductor with a group V element gives n-type material and a group III element gives p-type material.
Galvanic corrosion rate depends on the potential difference between coupled metals and on the anode-to-cathode area ratio, so a small anode connected to a large cathode corrodes fastest.
Last updated: August 2026
11.4 Electrical and Chemical Properties of Materials
Two NCEES Materials sub-topics are covered here: "Electrical properties of materials" and "Chemical properties of materials." Both are tested as material-selection knowledge rather than as circuit analysis or reaction stoichiometry — the question is which material behaves how, and why .
Electrical Resistivity and Conductivity R = ρ L A , σ = 1 ρ R = \frac{\rho L}{A}, \qquad \sigma = \frac{1}{\rho} R = A ρ L , σ = ρ 1
- Material Resistivity ρ \rho ρ (Ω·m) Class
- Silver 1.59 × 10 − 8 1.59\times10^{-8} 1.59 × 1 0 − 8 Conductor
- Copper 1.68 × 10 − 8 1.68\times10^{-8} 1.68 × 1 0 − 8 Conductor
- Gold 2.44 × 10 − 8 2.44\times10^{-8} 2.44 × 1 0 − 8 Conductor
- Aluminum 2.65 × 10 − 8 2.65\times10^{-8} 2.65 × 1 0 − 8 Conductor
- Tungsten 5.6 × 10 − 8 5.6\times10^{-8} 5.6 × 1 0 − 8 Conductor
- Carbon steel ∼ 1.4 × 10 − 7 \sim1.4\times10^{-7} ∼ 1.4 × 1 0 − 7 Conductor
- Stainless steel 304 7.2 × 10 − 7 7.2\times10^{-7} 7.2 × 1 0 − 7 Conductor
- Nichrome 1.1 × 10 − 6 1.1\times10^{-6} 1.1 × 1 0 − 6 Resistance alloy
- Silicon (intrinsic) ∼ 6.4 × 10 2 \sim6.4\times10^{2} ∼ 6.4 × 1 0 2 Semiconductor
- Glass 10 10 10^{10} 1 0 10 – 10 14 10^{14} 1 0 14 Insulator
- Fused quartz ∼ 10 18 \sim10^{18} ∼ 1 0 18 Insulator
The span from copper to fused quartz is 26 orders of magnitude — the widest range of any engineering property, which is why the conductor/semiconductor/insulator classification is qualitative rather than a matter of degree.
Why aluminum is used for transmission lines despite worse resistivity. Copper conducts about 58% better per unit volume , but aluminum's density is 2{,}700 kg/m³ against copper's 8{,}960. Per unit mass , aluminum conducts roughly twice as well — and for a suspended conductor, mass is what sets tower spacing and cost. This is a material-selection judgment where the raw property table gives the wrong answer.
Temperature Dependence: The Sign Distinguishes the Class ρ T = ρ 0 [ 1 + α T ( T − T 0 ) ] \rho_T = \rho_0\left[1 + \alpha_T(T - T_0)\right] ρ T = ρ 0 [ 1 + α T ( T − T 0 ) ]
Class Temperature coefficient Behavior Reason
Metals Positive ( α T > 0 \alpha_T > 0 α T > 0 ) Resistance rises with T T T More lattice vibration scatters the already-abundant electrons
Semiconductors Negative Resistance falls with T T T Thermal energy promotes far more carriers across the band gap
Insulators Negative Resistance falls with T T T Same mechanism, much larger gap
For copper, α T ≈ 0.00393 \alpha_T \approx 0.00393 α T ≈ 0.00393 /°C. A copper winding heating from 20 °C to 120 °C gains: ρ 120 ρ 20 = 1 + 0.00393 ( 100 ) = 1.393 \frac{\rho_{120}}{\rho_{20}} = 1 + 0.00393(100) = 1.393 ρ 20 ρ 120 = 1 + 0.00393 ( 100 ) = 1.393
39% more resistance — which is why motor and transformer windings are tested for resistance to infer their temperature, and why I 2 R I^2R I 2 R losses grow as equipment heats.
Exam discriminator: if resistance rises with temperature the material is a metal; if it falls , a semiconductor. A thermistor's steeply negative coefficient is what makes it a temperature sensor (see the Instrumentation chapter), while a platinum RTD's positive, highly linear coefficient is what makes it a precision one.
Semiconductors and Doping
Intrinsic silicon has a band gap of 1.11 eV (germanium 0.67 eV, gallium arsenide 1.42 eV). Doping adds carriers:
- Dopant group Example Type Majority carrier
- Group V (5 valence electrons) P, As, Sb n-type (donor) Electrons
- Group III (3 valence electrons) B, Al, Ga p-type (acceptor) Holes
Silicon has 4 valence electrons; a group V atom contributes a fifth that is loosely bound and free to conduct, while a group III atom leaves a vacancy — a hole — that conducts by accepting electrons. Doping at parts per million can raise conductivity by six orders of magnitude , which is the entire basis of the semiconductor industry.
Dielectric Properties
Property Definition Note
Relative permittivity ε r \varepsilon_r ε r Charge storage relative to vacuum Air 1.0; polyethylene 2.3; glass 4–10; water 80
Dielectric strength Field at which breakdown occurs (kV/mm) Air 3; polyethylene 20; mica 120
Loss tangent Fraction of energy dissipated per cycle Governs heating in RF applications C = ε r ε 0 A d C = \frac{\varepsilon_r\varepsilon_0 A}{d} C = d ε r ε 0 A
Chemical Properties: Corrosion and Chemical Resistance
The Materials sub-topic "Chemical properties of materials" is tested mainly through corrosion behavior — a material-selection question rather than the electrochemical calculation covered in the Chemistry chapter.
The Galvanic Series
When two dissimilar metals are electrically coupled in an electrolyte, the more active (anodic) metal corrodes preferentially and the more noble (cathodic) one is protected. Ordered from active to noble in seawater:
- Position Metal
- Most active (anodic — corrodes) Magnesium
- ↓ Zinc
- ↓ Aluminum alloys
- ↓ Carbon steel, cast iron
- ↓ Lead, tin
- ↓ Brass, copper, bronze
- ↓ Stainless steel (passive)
- Most noble (cathodic — protected) Titanium, graphite, platinum, gold
Two consequences drive real designs:
Sacrificial anodes. Bolting a magnesium or zinc block to a steel hull makes the block the anode; it corrodes and the steel does not. Galvanizing applies the same principle as a coating — zinc protects steel even where the coating is scratched through , because the exposed steel becomes the cathode.
Cathodic protection. Impressing a current makes the protected structure the cathode, used for buried pipelines and tanks.
The Area Ratio Effect
The single most useful corrosion design rule: corrosion rate depends on current density at the anode, not total current. So:
Small anode + large cathode = rapid, penetrating attack \text{Small anode + large cathode} = \textbf{rapid, penetrating attack} Small anode + large cathode = rapid, penetrating attack Large anode + small cathode = slow, distributed attack \text{Large anode + small cathode} = \text{slow, distributed attack} Large anode + small cathode = slow, distributed attack
Steel bolts in a copper plate fail quickly — a small steel anode carries the entire galvanic current from a large copper cathode, concentrating attack at the fasteners. Copper bolts in a steel plate are far safer: the large steel anode spreads the same total current thinly.
The general rule for fasteners follows directly: always make the fastener the more noble member , because the fastener is the small-area component and its failure is disproportionately consequential.
Passivation
Some metals form a thin, adherent, self-healing oxide that protects the bulk:
- Metal Passive film Note
- Stainless steel Cr₂O₃ Requires ≥ ~11–12% chromium and access to oxygen to self-heal
- Aluminum Al₂O₃ Very stable, but attacked at high and low pH
- Titanium TiO₂ Exceptionally stable — hence its use in implants and chemical plant
- Zinc ZnO/carbonate Slows atmospheric attack
The oxygen paradox. Passive films need oxygen to re-form. In an oxygen-starved crevice — under a gasket, beneath a deposit, inside a lap joint — the film cannot heal, and stainless steel suffers crevice corrosion and pitting precisely where it is least accessible. This is why stainless is unreliable in stagnant chloride service despite excellent general corrosion resistance, and why designs avoid crevices and dead legs. Chlorides specifically break down the chromium oxide film, which is the mechanism behind chloride stress corrosion cracking of austenitic stainless steels.
Chemical Resistance of Polymers
- Polymer Resists Attacked by
- PTFE (Teflon) Nearly everything Molten alkali metals, fluorine
- Polypropylene Acids, bases, most solvents Strong oxidizers, aromatics
- PVC Acids, bases, salts Ketones, esters, aromatics
- Polyethylene Acids, bases Oxidizers; swells in hydrocarbons
- Nylon Hydrocarbons, oils Acids, phenols; absorbs water
- Polycarbonate Dilute acids Bases, aromatic solvents
Polymer "corrosion" is fundamentally different from metal corrosion — it proceeds by swelling, solvation, plasticization, and chain scission rather than electrochemistry, so a polymer often fails by losing stiffness and dimensional stability rather than by losing mass.
Worked Example: Fastener Selection
A stainless steel (304) plate assembly in a marine environment requires bolts. Two options: carbon steel bolts or 316 stainless bolts. Evaluate.
Carbon steel bolts: carbon steel is anodic to stainless steel. The bolts are the small anode , the plate the large cathode — the worst possible area ratio. The entire galvanic current concentrates on the bolt shanks, and they fail rapidly by loss of section.
316 stainless bolts: 316 is very close to 304 in the galvanic series, so the driving potential is nearly zero and galvanic attack is negligible. The added molybdenum in 316 also improves chloride pitting resistance, which matters in seawater.
Select 316 stainless. The reasoning combines both rules — minimize the galvanic potential difference, and never make the small-area component the anode.
Trap: "use the cheapest bolt and add a coating." A coating defect on a small anode makes matters worse , because the entire galvanic current now concentrates on the pinhole, producing a far higher local current density than an uncoated bolt would experience.