Study guide

11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion

FE Other Disciplines Fundamentals of Engineering

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Strategy

About the FE Other Disciplines Exam How to Use This Study Guide

2 Chapter 1: Mathematics

1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration

3 Chapter 2: Probability and Statistics

2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression

4 Chapter 3: Chemistry

3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics

5 Chapter 4: Instrumentation and Controls

4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic

6 Chapter 5: Engineering Ethics and Societal Impacts

5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety

7 Chapter 6: Safety, Health, and Environment

6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates

8 Chapter 7: Engineering Economics

7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees

9 Chapter 8: Statics

8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c

10 Chapter 9: Dynamics

9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping

11 Chapter 10: Strength of Materials

10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria

12 Chapter 11: Materials

11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design

13 Chapter 12: Fluid Mechanics

12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law

14 Chapter 13: Basic Electrical Engineering

13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter

15 Chapter 14: Thermodynamics and Heat Transfer

14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart

11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion

Key Takeaways Explain This Topic AI

True stress ( σ t = σ e ( 1 + ϵ e ) \sigma_t = \sigma_e(1 + \epsilon_e) σ t ​ = σ e ​ ( 1 + ϵ e ​ ) ) and true strain ( ϵ t = ln ⁡ ( 1 + ϵ e ) \epsilon_t = \ln(1 + \epsilon_e) ϵ t ​ = ln ( 1 + ϵ e ​ ) ) account for instantaneous cross-sectional area changes up to the onset of necking in uniaxial tension testing.

Linear Elastic Fracture Mechanics (LEFM) defines failure via the stress intensity factor K I = Y σ π a K_I = Y \sigma \sqrt{\pi a} K I ​ = Yσ πa ​ , where brittle fracture occurs when K I ≥ K I c K_I \ge K_{Ic} K I ​ ≥ K I c ​ (plane-strain fracture toughness).

The Goodman equation ( σ a S e + σ m S u t = 1 \frac{\sigma_a}{S_e} + \frac{\sigma_m}{S_{ut}} = 1 S e ​ σ a ​ ​ + S u t ​ σ m ​ ​ = 1 ) modifies endurance limits to evaluate fatigue life under combined alternating stress ( σ a \sigma_a σ a ​ ) and non-zero mean tensile stress ( σ m \sigma_m σ m ​ ).

Steady-state creep behavior occurs at elevated homologous temperatures ( T > 0.4 T m T > 0.4 T_m T > 0.4 T m ​ ), where life prediction is modeled using the Larson-Miller parameter L M P = T [ C + log ⁡ 10 ( t r ) ] LMP = T[C + \log_{10}(t_r)] L MP = T [ C + lo g 10 ​ ( t r ​ )] .

Electrochemical corrosion involves simultaneous anodic oxidation ( M → M n + + n e − M \rightarrow M^{n+} + n e^- M → M n + + n e − ) and cathodic reduction, mitigated using sacrificial cathodic protection or protective oxide film passivation.

Last updated: August 2026

11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion

Exam Focus: Mechanical behavior and degradation topics on the FE exam require mastering engineering vs. true stress-strain relationships, elastic constants ( E , G , ν E, G, \nu E , G , ν ), fracture mechanics stress intensity ( K I = Y σ π a K_I = Y \sigma \sqrt{\pi a} K I ​ = Yσ πa ​ ), fatigue design with mean stress corrections (Goodman equation), high-temperature creep modeling via the Larson-Miller parameter, and electrochemical corrosion mechanisms.

Engineering vs. True Stress-Strain Relationships and Elastic Constants

Standard tension testing measures the response of a specimen under uniaxial loading. Uniaxial stress and strain are classified as either engineering or true parameters.

Metric Definitions

Engineering Stress ( σ e \sigma_e σ e ​ ): Force divided by original cross-sectional area: σ e = F A 0 \sigma_e = \frac{F}{A_0} σ e ​ = A 0 ​ F ​

Engineering Strain ( ϵ e \epsilon_e ϵ e ​ ): Change in length divided by original gage length: ϵ e = Δ L L 0 = L i − L 0 L 0 \epsilon_e = \frac{\Delta L}{L_0} = \frac{L_i - L_0}{L_0} ϵ e ​ = L 0 ​ Δ L ​ = L 0 ​ L i ​ − L 0 ​ ​

True Stress ( σ t \sigma_t σ t ​ ): Force divided by instantaneous cross-sectional area A i A_i A i ​ : σ t = F A i \sigma_t = \frac{F}{A_i} σ t ​ = A i ​ F ​

True Strain ( ϵ t \epsilon_t ϵ t ​ ): Instantaneous elongation strain integrated over gage length: ϵ t = ∫ L 0 L i d L L = ln ⁡ ( L i L 0 ) \epsilon_t = \int_{L_0}^{L_i} \frac{dL}{L} = \ln\left(\frac{L_i}{L_0}\right) ϵ t ​ = ∫ L 0 ​ L i ​ ​ L d L ​ = ln ( L 0 ​ L i ​ ​ )

Mathematical Conversions (Prior to Necking)

Assuming constant plastic volume ( A 0 L 0 = A i L i A_0 L_0 = A_i L_i A 0 ​ L 0 ​ = A i ​ L i ​ ), the relationship between true and engineering metrics prior to the onset of necking is:

L i L 0 = 1 + ϵ e ⟹ A i = A 0 1 + ϵ e \frac{L_i}{L_0} = 1 + \epsilon_e \implies A_i = \frac{A_0}{1 + \epsilon_e} L 0 ​ L i ​ ​ = 1 + ϵ e ​ ⟹ A i ​ = 1 + ϵ e ​ A 0 ​ ​

σ t = F A i = σ e ( 1 + ϵ e ) \sigma_t = \frac{F}{A_i} = \sigma_e (1 + \epsilon_e) σ t ​ = A i ​ F ​ = σ e ​ ( 1 + ϵ e ​ )

  • ϵ t = ln ⁡ ( 1 + ϵ e ) \epsilon_t = \ln(1 + \epsilon_e) ϵ t ​ = ln ( 1 + ϵ e ​ )
  • Elastic Constants and Hooke's Law

Within the linear elastic region:

Hooke's Law: σ = E ϵ \sigma = E \epsilon σ = E ϵ

Poisson's Ratio ( ν \nu ν ): Ratio of lateral contracting strain to axial elongating strain: ν = − ϵ lateral ϵ axial \nu = -\frac{\epsilon_{\text{lateral}}}{\epsilon_{\text{axial}}} ν = − ϵ axial ​ ϵ lateral ​ ​

Shear Modulus ( G G G ): Governs shear stress-strain response ( τ = G γ \tau = G \gamma τ = G γ ) and is related to E E E and ν \nu ν by: G = E 2 ( 1 + ν ) G = \frac{E}{2(1 + \nu)} G = 2 ( 1 + ν ) E ​

Key Stress-Strain Curve Parameters

Parameter Formula / Definition Engineering Significance

Modulus of Elasticity ( E E E ) E = σ ϵ E = \frac{\sigma}{\epsilon} E = ϵ σ ​ Slope of linear elastic region; material stiffness

0.2% Offset Yield Strength ( σ y \sigma_y σ y ​ ) Intercept of 0.002 strain offset line parallel to elastic slope Boundary between elastic and permanent plastic deformation

Ultimate Tensile Strength ( σ u t \sigma_{ut} σ u t ​ ) Peak engineering stress on stress-strain curve Maximum force capacity prior to localized necking

Modulus of Resilience ( U r U_r U r ​ ) U r = σ y 2 2 E U_r = \frac{\sigma_y^2}{2E} U r ​ = 2 E σ y 2 ​ ​ Elastic strain energy absorbed per unit volume without permanent deformation

Toughness ( U t U_t U t ​ ) Area under total stress-strain curve up to fracture Mechanical energy absorbed per unit volume prior to fracture

Percent Elongation (%EL) % E L = ( L f − L 0 L 0 ) × 100 % \%EL = \left(\frac{L_f - L_0}{L_0}\right) \times 100\% % E L = ( L 0 ​ L f ​ − L 0 ​ ​ ) × 100% Metric of material ductility

Percent Reduction in Area (%RA) % R A = ( A 0 − A f A 0 ) × 100 % \%RA = \left(\frac{A_0 - A_f}{A_0}\right) \times 100\% % R A = ( A 0 ​ A 0 ​ − A f ​ ​ ) × 100% Measure of localized necking ductility

Worked Example: True Stress and Strain Calculation

Problem: A cylindrical titanium alloy specimen with initial diameter d 0 = 12.8 mm d_0 = 12.8 \text{ mm} d 0 ​ = 12.8 mm ( A 0 = 128.68 mm 2 A_0 = 128.68 \text{ mm}^2 A 0 ​ = 128.68 mm 2 ) and gage length L 0 = 50.00 mm L_0 = 50.00 \text{ mm} L 0 ​ = 50.00 mm is loaded in tension. Under a load of F = 110.0 kN F = 110.0 \text{ kN} F = 110.0 kN prior to necking, the specimen length is measured as 54.20 mm 54.20 \text{ mm} 54.20 mm . Calculate the engineering stress, engineering strain, true stress, and true strain.

Solution:

Engineering Stress ( σ e \sigma_e σ e ​ ): σ e = 110 , 000 N 1.2868 × 10 − 4 m 2 = 8.548 × 10 8 Pa = 854.8 MPa \sigma_e = \frac{110,000 \text{ N}}{1.2868 \times 10^{-4} \text{ m}^2} = 8.548 \times 10^8 \text{ Pa} = 854.8 \text{ MPa} σ e ​ = 1.2868 × 1 0 − 4 m 2 110 , 000 N ​ = 8.548 × 1 0 8 Pa = 854.8 MPa

Engineering Strain ( ϵ e \epsilon_e ϵ e ​ ): ϵ e = 54.20 − 50.00 50.00 = 4.20 50.00 = 0.0840 \epsilon_e = \frac{54.20 - 50.00}{50.00} = \frac{4.20}{50.00} = 0.0840 ϵ e ​ = 50.00 54.20 − 50.00 ​ = 50.00 4.20 ​ = 0.0840

True Stress ( σ t \sigma_t σ t ​ ): σ t = σ e ( 1 + ϵ e ) = 854.8 MPa × ( 1 + 0.0840 ) = 854.8 × 1.0840 ≈ 926.6 MPa \sigma_t = \sigma_e (1 + \epsilon_e) = 854.8 \text{ MPa} \times (1 + 0.0840) = 854.8 \times 1.0840 \approx 926.6 \text{ MPa} σ t ​ = σ e ​ ( 1 + ϵ e ​ ) = 854.8 MPa × ( 1 + 0.0840 ) = 854.8 × 1.0840 ≈ 926.6 MPa

True Strain ( ϵ t \epsilon_t ϵ t ​ ): ϵ t = ln ⁡ ( 1 + ϵ e ) = ln ⁡ ( 1.0840 ) ≈ 0.0807 \epsilon_t = \ln(1 + \epsilon_e) = \ln(1.0840) \approx 0.0807 ϵ t ​ = ln ( 1 + ϵ e ​ ) = ln ( 1.0840 ) ≈ 0.0807

  • Hardness Testing, Charpy Impact, and Ductile-to-Brittle Transition
  • Hardness Testing Methods

Hardness measures a material's resistance to localized surface indentation or plastic deformation:

Rockwell (HRB, HRC): Measures depth of penetration under fixed minor/major loads using a 1/16-inch steel ball (HRB) or a Brale diamond cone penetrator (HRC).

Brinell (HB): Uses a 10 mm hardened steel or tungsten carbide sphere pressed into the surface under a 3000 kgf load, measuring indentation diameter.

Empirical Tensile Strength Correlation for Steels: UTS (MPa) ≈ 3.45 × HB \text{UTS (MPa)} \approx 3.45 \times \text{HB} UTS (MPa) ≈ 3.45 × HB UTS (psi) ≈ 500 × HB \text{UTS (psi)} \approx 500 \times \text{HB} UTS (psi) ≈ 500 × HB

Charpy Impact Energy and DBTT

Impact testing measures dynamic energy absorption under high strain rates using a swinging pendulum striker:

Charpy V-Notch (CVN) Test: Specimen supported as a simple beam with a central V-notch; energy absorbed during fracture is recorded in Joules ( J \text{J} J ) or foot-pounds ( ft ⋅ lbf \text{ft}\cdot\text{lbf} ft ⋅ lbf ).

Ductile-to-Brittle Transition Temperature (DBTT): Body-Centered Cubic (BCC) and Hexagonal Close-Packed (HCP) metals exhibit a sharp reduction in impact energy absorption as temperature drops below DBTT. Failure transitions from ductile dimpled shear fracture to brittle cleavage fracture along crystallographic planes.

FCC Metals: Face-Centered Cubic (FCC) metals (such as aluminum, copper, and austenitic stainless steels) retain high toughness down to cryogenic temperatures and do not exhibit a DBTT.

Fracture Mechanics and Stress Intensity

Conventional stress analysis assumes flaw-free materials. Linear Elastic Fracture Mechanics (LEFM) evaluates component safety in the presence of pre-existing microcracks or defects.

Stress Concentration Factor ( K t K_t K t ​ )

Geometric discontinuities (notches, holes, fillets) intensify local stresses: σ max = K t σ 0 \sigma_{\text{max}} = K_t \sigma_0 σ max ​ = K t ​ σ 0 ​

For an internal elliptical crack of length (2a) with crack tip radius ρ t \rho_t ρ t ​ : σ max = σ 0 ( 1 + 2 a ρ t ) \sigma_{\text{max}} = \sigma_0 \left(1 + 2\sqrt{\frac{a}{\rho_t}}\right) σ max ​ = σ 0 ​ ( 1 + 2 ρ t ​ a ​ ​ )

Stress Intensity Factor ( K I K_I K I ​ ) and Fracture Toughness ( K I c K_{Ic} K I c ​ )

Under Mode I (tensile opening) loading, the stress field at a crack tip is defined by the Stress Intensity Factor ( K I K_I K I ​ ) : K I = Y σ π a K_I = Y \sigma \sqrt{\pi a} K I ​ = Yσ πa ​

where:

  • (Y) = dimensionless geometry factor (typically Y ≈ 1.0 − 1.12 Y \approx 1.0 - 1.12 Y ≈ 1.0 − 1.12 )
  • σ \sigma σ = nominal applied tensile stress ( MPa \text{MPa} MPa )
  • (a) = crack depth for an edge crack, or half-length for an internal crack ( m \text{m} m )

Catastrophic fast brittle fracture occurs when K I K_I K I ​ reaches the critical material property known as Plane-Strain Fracture Toughness ( K I c K_{Ic} K I c ​ ) : K I ≥ K I c K_I \ge K_{Ic} K I ​ ≥ K I c ​

Critical Stress and Critical Flaw Size Equations σ c = K I c Y π a \sigma_c = \frac{K_{Ic}}{Y \sqrt{\pi a}} σ c ​ = Y πa ​ K I c ​ ​ a c = 1 π ( K I c Y σ ) 2 a_c = \frac{1}{\pi} \left(\frac{K_{Ic}}{Y \sigma}\right)^2 a c ​ = π 1 ​ ( Yσ K I c ​ ​ ) 2

Worked Example: Allowable Tensile Stress via Fracture Mechanics

Problem: A structural steel plate containing a through-thickness internal crack of total length 2 a = 16.0 mm 2a = 16.0 \text{ mm} 2 a = 16.0 mm ( a = 8.0 mm = 0.0080 m a = 8.0 \text{ mm} = 0.0080 \text{ m} a = 8.0 mm = 0.0080 m ) is subjected to a uniform tensile stress. The material has a plane-strain fracture toughness K I c = 45.0 MPa ⋅ m 1 / 2 K_{Ic} = 45.0 \text{ MPa}\cdot\text{m}^{1/2} K I c ​ = 45.0 MPa ⋅ m 1/2 and a yield strength σ y = 550 MPa \sigma_y = 550 \text{ MPa} σ y ​ = 550 MPa . Assuming (Y = 1.0):

Calculate the critical tensile stress σ c \sigma_c σ c ​ that causes brittle fracture.

Determine whether the plate fails by yielding or brittle fracture first.

Solution:

Calculate Critical Stress σ c \sigma_c σ c ​ : σ c = K I c Y π a = 45.0 MPa ⋅ m 1 / 2 1.0 × π × 0.0080 m = 45.0 0.025133 = 45.0 0.15853 ≈ 283.9 MPa \sigma_c = \frac{K_{Ic}}{Y \sqrt{\pi a}} = \frac{45.0 \text{ MPa}\cdot\text{m}^{1/2}}{1.0 \times \sqrt{\pi \times 0.0080 \text{ m}}} = \frac{45.0}{\sqrt{0.025133}} = \frac{45.0}{0.15853} \approx 283.9 \text{ MPa} σ c ​ = Y πa ​ K I c ​ ​ = 1.0 × π × 0.0080 m ​ 45.0 MPa ⋅ m 1/2 ​ = 0.025133 ​ 45.0 ​ = 0.15853 45.0 ​ ≈ 283.9 MPa

Evaluate Failure Mode: Since σ c = 283.9 MPa \sigma_c = 283.9 \text{ MPa} σ c ​ = 283.9 MPa is substantially less than the yield strength σ y = 550 MPa \sigma_y = 550 \text{ MPa} σ y ​ = 550 MPa , the component will fail by sudden brittle fracture before yielding occurs.

  • Fatigue Mechanics, Goodman Diagram, and Creep Mechanics
  • Cyclic Fatigue Parameters

Fatigue represents progressive structural damage under fluctuating or cyclic stress state loading:

Mean Stress ( σ m \sigma_m σ m ​ ): σ m = σ max + σ min 2 \sigma_m = \frac{\sigma_{\text{max}} + \sigma_{\text{min}}}{2} σ m ​ = 2 σ max ​ + σ min ​ ​

Stress Range ( Δ σ \Delta \sigma Δ σ ): Δ σ = σ max − σ min \Delta \sigma = \sigma_{\text{max}} - \sigma_{\text{min}} Δ σ = σ max ​ − σ min ​

Alternating Stress Amplitude ( σ a \sigma_a σ a ​ ): σ a = σ max − σ min 2 \sigma_a = \frac{\sigma_{\text{max}} - \sigma_{\text{min}}}{2} σ a ​ = 2 σ max ​ − σ min ​ ​

  • Stress Ratio ((R)): R = σ min σ max R = \frac{\sigma_{\text{min}}}{\sigma_{\text{max}}} R = σ max ​ σ min ​ ​
  • S-N Curves and Endurance Limit

Ferrous metals (steels) exhibit an Endurance Limit ( S e S_e S e ​ ) (typically S e ≈ 0.5 S u t S_e \approx 0.5 S_{ut} S e ​ ≈ 0.5 S u t ​ up to 100 ksi 100 \text{ ksi} 100 ksi ), below which the component can endure an infinite number of cycles without fatigue failure. Non-ferrous metals (e.g., aluminum) do not possess a true endurance limit; their fatigue strength continuously decreases with cycle count.

Mean Stress Corrections (Goodman Equation)

When cyclic stress is accompanied by a positive mean tensile stress ( σ m > 0 \sigma_m > 0 σ m ​ > 0 ), the allowable alternating stress is reduced according to the Modified Goodman Equation : σ a S e + σ m S u t = 1 n f \frac{\sigma_a}{S_e} + \frac{\sigma_m}{S_{ut}} = \frac{1}{n_f} S e ​ σ a ​ ​ + S u t ​ σ m ​ ​ = n f ​ 1 ​

where S e S_e S e ​ is the uncorrected endurance limit, S u t S_{ut} S u t ​ is ultimate tensile strength, and n f n_f n f ​ is the fatigue factor of safety.

Worked Example: Goodman Fatigue Safety Factor

Problem: A steel shaft with S u t = 700 MPa S_{ut} = 700 \text{ MPa} S u t ​ = 700 MPa and S e = 280 MPa S_e = 280 \text{ MPa} S e ​ = 280 MPa experiences cyclic tensile loading between σ max = 400 MPa \sigma_{\text{max}} = 400 \text{ MPa} σ max ​ = 400 MPa and σ min = 100 MPa \sigma_{\text{min}} = 100 \text{ MPa} σ min ​ = 100 MPa . Calculate the factor of safety n f n_f n f ​ using the Goodman relation.

Solution:

Calculate Mean and Alternating Stresses: σ m = 400 + 100 2 = 250 MPa \sigma_m = \frac{400 + 100}{2} = 250 \text{ MPa} σ m ​ = 2 400 + 100 ​ = 250 MPa σ a = 400 − 100 2 = 150 MPa \sigma_a = \frac{400 - 100}{2} = 150 \text{ MPa} σ a ​ = 2 400 − 100 ​ = 150 MPa

Apply Goodman Equation: σ a S e + σ m S u t = 150 280 + 250 700 = 0.5357 + 0.3571 = 0.8928 \frac{\sigma_a}{S_e} + \frac{\sigma_m}{S_{ut}} = \frac{150}{280} + \frac{250}{700} = 0.5357 + 0.3571 = 0.8928 S e ​ σ a ​ ​ + S u t ​ σ m ​ ​ = 280 150 ​ + 700 250 ​ = 0.5357 + 0.3571 = 0.8928 n f = 1 0.8928 ≈ 1.12 n_f = \frac{1}{0.8928} \approx 1.12 n f ​ = 0.8928 1 ​ ≈ 1.12

Cumulative Damage: Miner's Rule

Under multi-amplitude cyclic loading, fatigue damage accumulates linearly according to Miner's Rule : ∑ i = 1 k n i N i = C \sum_{i=1}^{k} \frac{n_i}{N_i} = C i = 1 ∑ k ​ N i ​ n i ​ ​ = C

where n i n_i n i ​ is the number of applied cycles at stress level σ i \sigma_i σ i ​ , and N i N_i N i ​ is the fatigue life at stress level σ i \sigma_i σ i ​ . Fatigue failure is predicted when C ≥ 1.0 C \ge 1.0 C ≥ 1.0 .

Creep Mechanics and Larson-Miller Parameter

Creep is time-dependent plastic deformation occurring under constant load at elevated temperatures (typically T > 0.4 T m T > 0.4 T_m T > 0.4 T m ​ in Kelvin).

Creep Curve Stages:

Primary (Transient) Creep: Strain rate decreases over time due to work hardening.

Secondary (Steady-State) Creep: Minimum constant creep rate ( ϵ ˙ s \dot{\epsilon}_s ϵ ˙ s ​ ) established by balance between work hardening and thermal recovery.

Tertiary Creep: Strain rate accelerates rapidly due to internal necking and micro-void formation, leading to rupture.

Larson-Miller Parameter (LMP): Predicts rupture time ( t r t_r t r ​ in hours) at absolute temperature (T): LMP = T [ C + log ⁡ 10 ( t r ) ] \text{LMP} = T [C + \log_{10}(t_r)] LMP = T [ C + lo g 10 ​ ( t r ​ )] where (T) is temperature in Kelvin ( K \text{K} K ) or Rankine ( R \text{R} R ), and (C) is a material constant (typically C ≈ 20 C \approx 20 C ≈ 20 for steels).

Electrochemical Corrosion Mechanisms and Mitigation

Corrosion is the destructive electrochemical attack of a material by reaction with its surrounding environment.

Electrochemical Cell Components

An electrochemical corrosion cell requires four essential elements:

Anode: The site of oxidation where metal atoms dissolve and release electrons.

Cathode: The site of reduction where electrons are consumed.

Electrolyte: An aqueous solution conducting ionic current.

Electrical Connection: Metallic path conducting electron flow from anode to cathode.

Electrochemical Half-Cell Reactions

Anodic Oxidation Reaction (Metal Dissolution): M → M n + + n e − M \rightarrow M^{n+} + n e^- M → M n + + n e −

Cathodic Reduction Reactions:

Acidic solutions (Hydrogen Evolution): 2 H + + 2 e − → H 2 ( g ) 2H^+ + 2e^- \rightarrow H_2 (g) 2 H + + 2 e − → H 2 ​ ( g )

Neutral/Basic aerated solutions (Oxygen Reduction): O 2 + 2 H 2 O + 4 e − → 4 O H − O_2 + 2H_2O + 4e^- \rightarrow 4OH^- O 2 ​ + 2 H 2 ​ O + 4 e − → 4 O H −

Faraday's Law for Corrosion Mass Loss m = I ⋅ t ⋅ M n ⋅ F m = \frac{I \cdot t \cdot M}{n \cdot F} m = n ⋅ F I ⋅ t ⋅ M ​

where (I) is corrosion current ( A \text{A} A ), (t) is time ( s \text{s} s ), (M) is molar mass ( g/mol \text{g/mol} g/mol ), (n) is valence state, and F = 96 , 485 C/mol F = 96,485 \text{ C/mol} F = 96 , 485 C/mol .

Forms of Corrosion

Galvanic Corrosion: Occurs when two dissimilar metals are electrically coupled in an electrolyte. The metal higher in the galvanic series (more active / anodic) corrodes rapidly to protect the cathodic metal.

Crevice Corrosion: Localized corrosion occurring in narrow gaps or stagnant fluid pockets driven by differential oxygen concentration cells.

Pitting Corrosion: Extremely localized breakdown of passive oxide films, creating deep pits in stainless steels exposed to chloride ions ( Cl − \text{Cl}^- Cl − ).

Intergranular Corrosion: Sensitization of austenitic stainless steels during welding between 500 ∘ C 500^\circ\text{C} 50 0 ∘ C and 800 ∘ C 800^\circ\text{C} 80 0 ∘ C , causing chromium carbide ( Cr 23 C 6 \text{Cr}_{23}\text{C}_6 Cr 23 ​ C 6 ​ ) precipitation along grain boundaries and depleting local chromium below 12 wt% Cr 12 \text{ wt\% Cr} 12 wt% Cr .

Stress Corrosion Cracking (SCC): Rapid brittle cracking resulting from simultaneous tensile stress and a specific corrosive environment.

Corrosion Control Methods

Sacrificial Anode Cathodic Protection: Attaching sacrificial anodes (e.g., zinc or magnesium) to protect steel structures.

Impressed Current Cathodic Protection (ICCP): Applying external DC voltage to drive the structure cathodic.

Passivation: Maintaining a self-healing protective oxide film (e.g., Cr 2 O 3 \text{Cr}_2\text{O}_3 Cr 2 ​ O 3 ​ on stainless steel).