Study guide
11.1 Crystal Structure, Phase Diagrams, and Material Processing
FE Other Disciplines Fundamentals of Engineering
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Strategy
About the FE Other Disciplines Exam How to Use This Study Guide
2 Chapter 1: Mathematics
1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration
3 Chapter 2: Probability and Statistics
2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression
4 Chapter 3: Chemistry
3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics
5 Chapter 4: Instrumentation and Controls
4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic
6 Chapter 5: Engineering Ethics and Societal Impacts
5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety
7 Chapter 6: Safety, Health, and Environment
6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates
8 Chapter 7: Engineering Economics
7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees
9 Chapter 8: Statics
8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c
10 Chapter 9: Dynamics
9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping
11 Chapter 10: Strength of Materials
10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria
12 Chapter 11: Materials
11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design
13 Chapter 12: Fluid Mechanics
12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law
14 Chapter 13: Basic Electrical Engineering
13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter
15 Chapter 14: Thermodynamics and Heat Transfer
14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart
11.1 Crystal Structure, Phase Diagrams, and Material Processing
Key Takeaways Explain This Topic AI
Metallic crystal structures (BCC, FCC, HCP) dictate atomic packing factors (BCC = 0.68, FCC/HCP = 0.74) and theoretical mass densities calculated via ρ = n A V c N A \rho = \frac{n A}{V_c N_A} ρ = V c N A n A .
Bragg's Law ( n λ = 2 d sin θ n \lambda = 2 d \sin \theta nλ = 2 d sin θ ) defines the conditions for constructive X-ray diffraction, where interplanar spacing d h k l = a h 2 + k 2 + l 2 d_{hkl} = \frac{a}{\sqrt{h^2 + k^2 + l^2}} d hk l = h 2 + k 2 + l 2 a for cubic crystal lattices.
The Lever Rule computes phase mass fractions in binary phase diagrams: W α = C β − C 0 C β − C α W_\alpha = \frac{C_\beta - C_0}{C_\beta - C_\alpha} W α = C β − C α C β − C 0 , where C 0 C_0 C 0 is overall alloy composition and C α , C β C_\alpha, C_\beta C α , C β are phase boundary compositions.
Eutectic ( L ⇌ α + β L \rightleftharpoons \alpha + \beta L ⇌ α + β ) and eutectoid ( γ ⇌ α + β \gamma \rightleftharpoons \alpha + \beta γ ⇌ α + β ) phase transformations govern non-equilibrium microstructural evolution in binary systems such as the Fe-Fe3C diagram.
Heat treatments alter steel microstructures from soft, ductile pearlite/ferrite to extremely hard martensite via quenching, followed by tempering to restore toughness.
Last updated: August 2026
11.1 Crystal Structure, Phase Diagrams, and Material Processing
Exam Focus: Materials science on the FE Other Disciplines exam tests crystal lattice geometry, theoretical density calculations using atomic radius and unit cell volume, X-ray diffraction via Bragg's Law, quantitative phase diagram evaluation using the Lever Rule on binary systems (especially Fe-Fe 3 C \text{Fe-Fe}_3\text{C} Fe-Fe 3 C ), equilibrium vs non-equilibrium heat treatment microstructures, and polymer structure classification.
Unit Cells, Atomic Packing Factor, and Theoretical Density
Metals and many ceramics solidify into repeating three-dimensional atomic arrangements known as crystal lattices . The smallest repeating structural unit that reflects the full symmetry of the crystal lattice is the unit cell . The FE Reference Handbook highlights three primary metallic crystal structures: Body-Centered Cubic (BCC) , Face-Centered Cubic (FCC) , and Hexagonal Close-Packed (HCP) .
Lattice Characteristics and Geometry
Simple Cubic (SC): Contains 8 corner atoms, each shared among 8 neighboring unit cells, giving n = 8 × ( 1 / 8 ) = 1 n = 8 \times (1/8) = 1 n = 8 × ( 1/8 ) = 1 atom per unit cell. Atoms touch along the cube edge: (a = 2r).
Body-Centered Cubic (BCC): Contains 8 corner atoms plus 1 central atom, giving n = 8 × ( 1 / 8 ) + 1 = 2 n = 8 \times (1/8) + 1 = 2 n = 8 × ( 1/8 ) + 1 = 2 atoms per unit cell. Atoms touch along the body diagonal: 3 a = 4 r ⟹ a = 4 r 3 \sqrt{3}a = 4r \implies a = \frac{4r}{\sqrt{3}} 3 a = 4 r ⟹ a = 3 4 r . Coordination number is 8. Examples include α \alpha α -iron, chromium, tungsten, molybdenum, and vanadium.
Face-Centered Cubic (FCC): Contains 8 corner atoms plus 6 face-centered atoms (each shared by 2 cells), giving n = 8 × ( 1 / 8 ) + 6 × ( 1 / 2 ) = 4 n = 8 \times (1/8) + 6 \times (1/2) = 4 n = 8 × ( 1/8 ) + 6 × ( 1/2 ) = 4 atoms per unit cell. Atoms touch along the face diagonal: 2 a = 4 r ⟹ a = 2 2 r \sqrt{2}a = 4r \implies a = 2\sqrt{2}r 2 a = 4 r ⟹ a = 2 2 r . Coordination number is 12. Examples include γ \gamma γ -iron, aluminum, copper, gold, silver, nickel, and platinum.
Hexagonal Close-Packed (HCP): Features top and bottom hexagonal planes with 6 corner atoms, 1 center atom, plus 3 interior atoms between planes, yielding (n = 6) atoms per hexagonal unit cell (or 2 atoms for the primitive cell). Ideal height-to-edge ratio is (c/a = 1.633). Coordination number is 12. Examples include titanium, zinc, magnesium, and zirconium.
Atomic Packing Factor (APF)
The Atomic Packing Factor (APF) represents the fraction of solid sphere volume occupied by atoms within a unit cell: APF = V atoms V unit cell = n ⋅ ( 4 3 π r 3 ) V c \text{APF} = \frac{V_{\text{atoms}}}{V_{\text{unit cell}}} = \frac{n \cdot \left(\frac{4}{3}\pi r^3\right)}{V_c} APF = V unit cell V atoms = V c n ⋅ ( 3 4 π r 3 )
Crystal Structure Atoms per Unit Cell ((n)) Lattice Constant (a(r)) Coordination Number Atomic Packing Factor (APF) Common Metal Examples
Simple Cubic (SC) 1 (a = 2r) 6 0.5236 Polonium ( α \alpha α -Po)
Body-Centered Cubic (BCC) 2 a = 4 r 3 a = \frac{4r}{\sqrt{3}} a = 3 4 r 8 0.6802 α \alpha α -Fe, Cr, W, V, Mo
- Face-Centered Cubic (FCC) 4 a = 2 2 r a = 2\sqrt{2}r a = 2 2 r 12 0.7405 γ \gamma γ -Fe, Al, Cu, Au, Ag, Ni
- Hexagonal Close-Packed (HCP) 6 (or 2 prim.) (c/a = 1.633) 12 0.7405 Ti, Mg, Zn, Zr
- Theoretical Mass Density Equation
The theoretical mass density ( ρ \rho ρ ) of a crystalline material is determined from its unit cell parameters: ρ = n ⋅ A V c ⋅ N A \rho = \frac{n \cdot A}{V_c \cdot N_A} ρ = V c ⋅ N A n ⋅ A
where:
- (n) = number of atoms per unit cell
- (A) = atomic weight of the element ( g/mol \text{g/mol} g/mol or kg/kmol \text{kg/kmol} kg/kmol )
V c V_c V c = unit cell volume ( a 3 a^3 a 3 for cubic systems, cm 3 \text{cm}^3 cm 3 or m 3 \text{m}^3 m 3 )
N A N_A N A = Avogadro's number ( 6.022 × 10 23 atoms/mol 6.022 \times 10^{23} \text{ atoms/mol} 6.022 × 1 0 23 atoms/mol )
Worked Example: Theoretical Density of FCC Copper
Problem: Face-Centered Cubic (FCC) copper ( Cu \text{Cu} Cu ) has an atomic radius r = 0.1278 nm r = 0.1278 \text{ nm} r = 0.1278 nm ( 1.278 × 10 − 8 cm 1.278 \times 10^{-8} \text{ cm} 1.278 × 1 0 − 8 cm ) and an atomic weight A = 63.55 g/mol A = 63.55 \text{ g/mol} A = 63.55 g/mol . Calculate its theoretical mass density in g/cm 3 \text{g/cm}^3 g/cm 3 .
Solution:
Identify atoms per cell: For FCC, (n = 4).
Calculate lattice parameter (a): a = 2 2 r = 2 2 ( 1.278 × 10 − 8 cm ) = 3.6148 × 10 − 8 cm a = 2\sqrt{2} r = 2\sqrt{2} (1.278 \times 10^{-8} \text{ cm}) = 3.6148 \times 10^{-8} \text{ cm} a = 2 2 r = 2 2 ( 1.278 × 1 0 − 8 cm ) = 3.6148 × 1 0 − 8 cm
Calculate unit cell volume V c = a 3 V_c = a^3 V c = a 3 : V c = ( 3.6148 × 10 − 8 cm ) 3 = 4.7236 × 10 − 23 cm 3 V_c = (3.6148 \times 10^{-8} \text{ cm})^3 = 4.7236 \times 10^{-23} \text{ cm}^3 V c = ( 3.6148 × 1 0 − 8 cm ) 3 = 4.7236 × 1 0 − 23 cm 3
Compute density ρ \rho ρ : ρ = 4 atoms × 63.55 g/mol ( 4.7236 × 10 − 23 cm 3 ) × ( 6.022 × 10 23 atoms/mol ) = 254.2 28.4456 ≈ 8.936 g/cm 3 \rho = \frac{4 \text{ atoms} \times 63.55 \text{ g/mol}}{(4.7236 \times 10^{-23} \text{ cm}^3) \times (6.022 \times 10^{23} \text{ atoms/mol})} = \frac{254.2}{28.4456} \approx 8.936 \text{ g/cm}^3 ρ = ( 4.7236 × 1 0 − 23 cm 3 ) × ( 6.022 × 1 0 23 atoms/mol ) 4 atoms × 63.55 g/mol = 28.4456 254.2 ≈ 8.936 g/cm 3
Bragg's Law and X-Ray Diffraction
X-ray diffraction (XRD) is the primary technique used to determine crystallographic structures, lattice parameters, and interplanar spacings. When a monochromatic X-ray beam strikes parallel crystallographic planes specified by Miller indices ((hkl)), constructive interference occurs only when the path length difference between reflected waves equals an integer number of wavelengths.
Bragg's Law Formula n λ = 2 d h k l sin θ n \lambda = 2 d_{hkl} \sin \theta nλ = 2 d hk l sin θ
where:
- (n) = order of diffraction (an integer, typically (n = 1))
- λ \lambda λ = wavelength of incident X-ray radiation ( nm \text{nm} nm or A ˚ \text{\AA} A ˚ )
- d h k l d_{hkl} d hk l = interplanar spacing between adjacent parallel ((hkl)) planes
- θ \theta θ = Bragg diffraction angle (half of the total reflection angle 2 θ 2\theta 2 θ )
- Interplanar Spacing for Cubic Crystals
For any cubic crystal system (SC, BCC, or FCC) with lattice parameter (a), the interplanar spacing d h k l d_{hkl} d hk l for a specific set of planes ((hkl)) is given by: d h k l = a h 2 + k 2 + l 2 d_{hkl} = \frac{a}{\sqrt{h^2 + k^2 + l^2}} d hk l = h 2 + k 2 + l 2 a
Worked Example: X-Ray Diffraction Angle for BCC Iron
Problem: Monochromatic X-rays with wavelength λ = 0.1542 nm \lambda = 0.1542 \text{ nm} λ = 0.1542 nm ( Cu K α \text{Cu } K_\alpha Cu K α radiation) reflect off the ((110)) planes of a Body-Centered Cubic (BCC) iron crystal with lattice parameter a = 0.2866 nm a = 0.2866 \text{ nm} a = 0.2866 nm . Assuming first-order diffraction ((n = 1)), calculate the diffraction angle θ \theta θ and the detector position 2 θ 2\theta 2 θ .
Solution:
Compute interplanar spacing d 110 d_{110} d 110 : d 110 = a 1 2 + 1 2 + 0 2 = 0.2866 2 = 0.2866 1.4142 ≈ 0.20265 nm d_{110} = \frac{a}{\sqrt{1^2 + 1^2 + 0^2}} = \frac{0.2866}{\sqrt{2}} = \frac{0.2866}{1.4142} \approx 0.20265 \text{ nm} d 110 = 1 2 + 1 2 + 0 2 a = 2 0.2866 = 1.4142 0.2866 ≈ 0.20265 nm
Apply Bragg's Law to solve for sin θ \sin \theta sin θ : sin θ = n λ 2 d 110 = 1 × 0.1542 nm 2 × 0.20265 nm = 0.1542 0.4053 ≈ 0.38046 \sin \theta = \frac{n \lambda}{2 d_{110}} = \frac{1 \times 0.1542 \text{ nm}}{2 \times 0.20265 \text{ nm}} = \frac{0.1542}{0.4053} \approx 0.38046 sin θ = 2 d 110 nλ = 2 × 0.20265 nm 1 × 0.1542 nm = 0.4053 0.1542 ≈ 0.38046
Calculate θ \theta θ and 2 θ 2\theta 2 θ : θ = arcsin ( 0.38046 ) ≈ 22.36 ∘ \theta = \arcsin(0.38046) \approx 22.36^\circ θ = arcsin ( 0.38046 ) ≈ 22.3 6 ∘ 2 θ = 2 × 22.36 ∘ = 44.72 ∘ 2\theta = 2 \times 22.36^\circ = 44.72^\circ 2 θ = 2 × 22.3 6 ∘ = 44.7 2 ∘
Phase Diagrams, Gibbs Phase Rule, and the Lever Rule
A phase diagram maps the equilibrium microstructures and phases present in a material system as a function of temperature, pressure, and chemical composition.
Gibbs Phase Rule
The number of degrees of freedom ( F F F ) in an equilibrium system is governed by Gibbs Phase Rule: P + F = C + N P + F = C + N P + F = C + N
For binary systems under constant atmospheric pressure ( N = 1 N = 1 N = 1 ), the reduced Gibbs Phase Rule simplifies to: P + F = C + 1 P + F = C + 1 P + F = C + 1
where P P P is the number of coexisting phases, C C C is the number of chemical components, and F F F is the degrees of freedom (number of state variables like temperature and concentration that can be independently varied without altering the number of phases present).
Boundary Lines on Phase Diagrams
Liquidus Line: The boundary above which the system is entirely liquid.
Solidus Line: The boundary below which the system is entirely solid.
Solvus Line: The boundary defining the limit of solid solubility between two solid phases.
The Lever Rule Equation
To determine the mass fraction of coexisting phases in a two-phase region (e.g., α + β \alpha + \beta α + β ) at temperature T T T , construct a horizontal tie-line extending across the two-phase region from phase boundary C α C_\alpha C α to phase boundary C β C_\beta C β . For an overall alloy composition C 0 C_0 C 0 : W α = C β − C 0 C β − C α W_\alpha = \frac{C_\beta - C_0}{C_\beta - C_\alpha} W α = C β − C α C β − C 0 W β = C 0 − C α C β − C α = 1 − W α W_\beta = \frac{C_0 - C_\alpha}{C_\beta - C_\alpha} = 1 - W_\alpha W β = C β − C α C 0 − C α = 1 − W α
Note that the mass fraction of phase α \alpha α is proportional to the length of the tie-line segment opposite to phase α \alpha α .
Binary Invariant Reactions
An invariant reaction occurs at a specific temperature and composition where three phases coexist in equilibrium ( F = 0 F = 0 F = 0 ):
Reaction Type Equation on Cooling Microstructural Significance
Eutectic L ⇌ α + β L \rightleftharpoons \alpha + \beta L ⇌ α + β Liquid transforms directly into two distinct solid phases
Eutectoid γ ⇌ α + β \gamma \rightleftharpoons \alpha + \beta γ ⇌ α + β A solid phase transforms into two new solid phases
Peritectic L + α ⇌ β L + \alpha \rightleftharpoons \beta L + α ⇌ β Liquid plus a solid phase transform into a single new solid phase
Peritectoid α + β ⇌ γ \alpha + \beta \rightleftharpoons \gamma α + β ⇌ γ Two solid phases transform into a single new solid phase
The Iron-Carbon ( Fe-Fe 3 C \text{Fe-Fe}_3\text{C} Fe-Fe 3 C ) System and Heat Treatment Processes
The iron-carbon system forms the cornerstone of steel metallurgy. Steel is defined as an iron-carbon alloy containing less than 2.14 wt% C 2.14 \text{ wt\% C} 2.14 wt% C , whereas cast iron contains between 2.14 wt% C 2.14 \text{ wt\% C} 2.14 wt% C and 6.70 wt% C 6.70 \text{ wt\% C} 6.70 wt% C .
Key Constituents of the Iron-Carbon System
Ferrite ( α \alpha α -iron): Body-Centered Cubic (BCC) solid solution of carbon in iron. Stable below 912 ∘ C 912^\circ\text{C} 91 2 ∘ C . Maximum carbon solubility is 0.022 wt% C 0.022 \text{ wt\% C} 0.022 wt% C at 727 ∘ C 727^\circ\text{C} 72 7 ∘ C . Ferrite is soft, ductile, and magnetic.
Austenite ( γ \gamma γ -iron): Face-Centered Cubic (FCC) solid solution of carbon in iron. Stable between 912 ∘ C 912^\circ\text{C} 91 2 ∘ C and 1394 ∘ C 1394^\circ\text{C} 139 4 ∘ C . Maximum carbon solubility is 2.14 wt% C 2.14 \text{ wt\% C} 2.14 wt% C at 1147 ∘ C 1147^\circ\text{C} 114 7 ∘ C . Austenite is non-magnetic and tough.
Cementite ( Fe 3 C \text{Fe}_3\text{C} Fe 3 C ): An intermetallic compound containing 6.70 wt% C 6.70 \text{ wt\% C} 6.70 wt% C . Extremely hard, brittle, and ceramic-like.
Pearlite: A two-phase lamellar (layered) microstructure composed of alternating plates of α \alpha α -ferrite ( 88 wt% 88 \text{ wt\%} 88 wt% ) and cementite ( 12 wt% 12 \text{ wt\%} 12 wt% ) formed during slow equilibrium cooling of austenite across the eutectoid temperature ( 727 ∘ C 727^\circ\text{C} 72 7 ∘ C , 0.76 wt% C 0.76 \text{ wt\% C} 0.76 wt% C ).
Microstructural Calculations: Hypoeutectoid vs. Hypereutectoid Steels
Hypoeutectoid Steel ( < 0.76 wt% C < 0.76 \text{ wt\% C} < 0.76 wt% C ): Upon cooling from austenite, proeutectoid ferrite ( α ′ \alpha' α ′ ) forms first along grain boundaries until 727 ∘ C 727^\circ\text{C} 72 7 ∘ C , at which point remaining austenite transforms to pearlite.
Hypereutectoid Steel ( 0.76 − 2.14 wt% C 0.76 - 2.14 \text{ wt\% C} 0.76 − 2.14 wt% C ): Proeutectoid cementite forms first along grain boundaries, followed by pearlite transformation at 727 ∘ C 727^\circ\text{C} 72 7 ∘ C .
Worked Example: Microstructural Fractions in 0.40 wt% C 0.40 \text{ wt\% C} 0.40 wt% C Steel
Problem: A 0.40 wt% C 0.40 \text{ wt\% C} 0.40 wt% C hypoeutectoid steel is slowly cooled under equilibrium conditions to just below 727 ∘ C 727^\circ\text{C} 72 7 ∘ C . Given phase compositions of C α = 0.022 wt% C C_\alpha = 0.022 \text{ wt\% C} C α = 0.022 wt% C , C γ = 0.76 wt% C C_\gamma = 0.76 \text{ wt\% C} C γ = 0.76 wt% C , and C Fe 3 C = 6.70 wt% C C_{\text{Fe}_3\text{C}} = 6.70 \text{ wt\% C} C Fe 3 C = 6.70 wt% C :
Calculate total mass fraction of ferrite ( W α W_\alpha W α ) and cementite ( W Fe 3 C W_{\text{Fe}_3\text{C}} W Fe 3 C ).
Calculate mass fraction of proeutectoid ferrite ( W α ′ W_{\alpha'} W α ′ ) formed prior to the eutectoid reaction.
Solution:
Total Ferrite and Cementite Fractions: W α = C Fe 3 C − C 0 C Fe 3 C − C α = 6.70 − 0.40 6.70 − 0.022 = 6.30 6.678 ≈ 0.9434 (94.34%) W_\alpha = \frac{C_{\text{Fe}_3\text{C}} - C_0}{C_{\text{Fe}_3\text{C}} - C_\alpha} = \frac{6.70 - 0.40}{6.70 - 0.022} = \frac{6.30}{6.678} \approx 0.9434 \text{ (94.34\%)} W α = C Fe 3 C − C α C Fe 3 C − C 0 = 6.70 − 0.022 6.70 − 0.40 = 6.678 6.30 ≈ 0.9434 (94.34%) W Fe 3 C = C 0 − C α C Fe 3 C − C α = 0.40 − 0.022 6.70 − 0.022 = 0.378 6.678 ≈ 0.0566 (5.66%) W_{\text{Fe}_3\text{C}} = \frac{C_0 - C_\alpha}{C_{\text{Fe}_3\text{C}} - C_\alpha} = \frac{0.40 - 0.022}{6.70 - 0.022} = \frac{0.378}{6.678} \approx 0.0566 \text{ (5.66\%)} W Fe 3 C = C Fe 3 C − C α C 0 − C α = 6.70 − 0.022 0.40 − 0.022 = 6.678 0.378 ≈ 0.0566 (5.66%)
Proeutectoid Ferrite Fraction ( W α ′ W_{\alpha'} W α ′ ): W α ′ = C γ − C 0 C γ − C α = 0.76 − 0.40 0.76 − 0.022 = 0.36 0.738 ≈ 0.4878 (48.78%) W_{\alpha'} = \frac{C_\gamma - C_0}{C_\gamma - C_\alpha} = \frac{0.76 - 0.40}{0.76 - 0.022} = \frac{0.36}{0.738} \approx 0.4878 \text{ (48.78\%)} W α ′ = C γ − C α C γ − C 0 = 0.76 − 0.022 0.76 − 0.40 = 0.738 0.36 ≈ 0.4878 (48.78%) (Pearlite fraction is W pearlite = 1 − W α ′ = 0.5122 W_{\text{pearlite}} = 1 - W_{\alpha'} = 0.5122 W pearlite = 1 − W α ′ = 0.5122 or 51.22%).
Steel Heat Treatments
Full Annealing: Heating steel into the single-phase austenite region followed by slow furnace cooling. Produces coarse pearlite, low strength, maximum ductility, and stress relief.
Normalizing: Heating above the upper critical temperature followed by still-air cooling. Yields fine pearlite, refined grain structure, and higher yield strength than full annealing.
Quenching: Rapidly cooling austenite in water, oil, or brine to suppress carbon diffusion. Traps carbon in a Body-Centered Tetragonal (BCT) lattice called Martensite . Martensite is extremely hard, strong, and brittle.
Tempering: Reheating quenched martensitic steel to a temperature below the eutectoid line ( 250 ∘ C − 650 ∘ C 250^\circ\text{C} - 650^\circ\text{C} 25 0 ∘ C − 65 0 ∘ C ). Promotes diffusion of trapped carbon to form Tempered Martensite (fine cementite particles in a ferrite matrix), restoring ductility and impact toughness while retaining high strength.
Polymer Structure and Crystallinity
Thermoplastics: Linear and branched polymer chains connected by weak van der Waals secondary bonds. Reversibly soften/melt above melting temperature ( T m T_m T m ) and re-harden upon cooling (e.g., polyethylene, PVC, polystyrene).
Thermosets: Cross-linked 3D network polymer chains joined by strong covalent bonds. Do not melt upon heating; decompose permanently at elevated temperatures (e.g., epoxy, phenolic resins).
Thermal Transitions: Amorphous regions exhibit a Glass Transition Temperature ( T g T_g T g ) , below which the polymer behaves as a rigid brittle glass and above which it becomes rubbery and flexible.