Study guide
11.3 Thermal Properties of Materials
FE Other Disciplines Fundamentals of Engineering
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Strategy
About the FE Other Disciplines Exam How to Use This Study Guide
2 Chapter 1: Mathematics
1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration
3 Chapter 2: Probability and Statistics
2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression
4 Chapter 3: Chemistry
3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics
5 Chapter 4: Instrumentation and Controls
4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic
6 Chapter 5: Engineering Ethics and Societal Impacts
5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety
7 Chapter 6: Safety, Health, and Environment
6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates
8 Chapter 7: Engineering Economics
7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees
9 Chapter 8: Statics
8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c
10 Chapter 9: Dynamics
9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping
11 Chapter 10: Strength of Materials
10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria
12 Chapter 11: Materials
11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design
13 Chapter 12: Fluid Mechanics
12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law
14 Chapter 13: Basic Electrical Engineering
13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter
15 Chapter 14: Thermodynamics and Heat Transfer
14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart
11.3 Thermal Properties of Materials
Key Takeaways Explain This Topic AI
NCEES lists thermal properties of materials as its own Materials sub-topic, distinct from the heat transfer area.
Free thermal strain is alpha times the temperature change, and a fully restrained member develops a stress of E times alpha times the temperature change.
Thermal conductivity spans five orders of magnitude, from about 400 W/m-K for copper to 0.03 W/m-K for insulating foam.
Thermal diffusivity equals conductivity divided by density times specific heat and governs how fast a temperature front travels.
A mismatch in coefficients of thermal expansion between bonded materials generates interfacial stress on every temperature cycle, which is a primary cause of coating and solder-joint failure.
Last updated: August 2026
11.3 Thermal Properties of Materials
NCEES lists "Thermal properties of materials" as a Materials sub-topic. It is distinct from the Thermodynamics and Heat Transfer area: there you compute heat flow through a wall given k k k , while here you must know what k k k is for a given material class and why , and you must handle the mechanical consequences of temperature change.
Coefficient of Thermal Expansion ε thermal = α Δ T , δ = α L Δ T \varepsilon_{\text{thermal}} = \alpha\,\Delta T, \qquad \delta = \alpha L\,\Delta T ε thermal = α Δ T , δ = αL Δ T
- Material α \alpha α (×10⁻⁶ /°C) α \alpha α (×10⁻⁶ /°F)
- Invar (Fe-Ni alloy) 1.2 0.7
- Borosilicate glass (Pyrex) 3.3 1.8
- Tungsten 4.5 2.5
- Silicon 2.6 1.4
- Cast iron 10.8 6.0
- Structural steel 11.7 6.5
- Concrete 10–14 6–8
- Copper 16.5 9.2
- Brass 19 10.6
- Aluminum 23.6 13.1
- Polyethylene 100–200 55–110
The steel-and-concrete coincidence: both are near 11 × 10 − 6 11 \times 10^{-6} 11 × 1 0 − 6 /°C, which is precisely why reinforced concrete works. If the two expanded at appreciably different rates, every temperature swing would debond the reinforcement. Note also that aluminum expands about twice as much as steel — the source of countless mixed-assembly problems.
Restrained Thermal Stress
The key concept, and the one most often confused:
- Condition Strain Stress
- Free to expand ε = α Δ T \varepsilon = \alpha\Delta T ε = α Δ T σ = 0 \sigma = 0 σ = 0
Fully restrained ε net = 0 \varepsilon_{\text{net}} = 0 ε net = 0 σ = E α Δ T \sigma = E\alpha\Delta T σ = E α Δ T
Partially restrained Between the two Between the two σ thermal = E α Δ T \boxed{\sigma_{\text{thermal}} = E\alpha\,\Delta T} σ thermal = E α Δ T
Note what is absent: length. A fully restrained bar develops the same thermal stress whether it is 1 m or 100 m long, because both the free expansion and the compression needed to cancel it scale with L L L . Candidates who look for a length in the problem statement are looking for information that does not matter.
Worked Example: Restrained Rail
A steel rail ( E = 200 E = 200 E = 200 GPa, α = 11.7 × 10 − 6 \alpha = 11.7\times10^{-6} α = 11.7 × 1 0 − 6 /°C) is installed at 10 °C with no expansion gap and fully restrained. Find the stress at 45 °C. Δ T = 45 − 10 = 35 ° C \Delta T = 45 - 10 = 35\ °\text{C} Δ T = 45 − 10 = 35 ° C σ = E α Δ T = ( 200 × 10 9 ) ( 11.7 × 10 − 6 ) ( 35 ) = 81.9 × 10 6 Pa = 81.9 MPa compression \sigma = E\alpha\Delta T = (200\times10^9)(11.7\times10^{-6})(35) = 81.9\times10^6\ \text{Pa} = \boxed{81.9\ \text{MPa compression}} σ = E α Δ T = ( 200 × 1 0 9 ) ( 11.7 × 1 0 − 6 ) ( 35 ) = 81.9 × 1 0 6 Pa = 81.9 MPa compression
For A36 steel with σ y = 250 \sigma_y = 250 σ y = 250 MPa, that is 33% of yield from a 35 °C swing alone — before any traffic load. A 100 °C swing would reach 234 MPa, essentially at yield, which is why continuous welded rail must be laid at a controlled neutral temperature and why bridges have expansion joints.
Thermal Conductivity q = − k A d T d x q = -kA\frac{dT}{dx} q = − k A d x d T
- Material k k k (W/m·K) Mechanism
- Silver 429 Free electrons
- Copper 401 Free electrons
- Aluminum 237 Free electrons
- Carbon steel ~50 Electrons, impeded by alloying
- Stainless steel 304 16 Heavy alloying scatters electrons
- Concrete 1.4 Lattice vibrations (phonons)
- Glass 0.8 Phonons, disordered structure
- Water 0.6 —
- Polymer (nylon, PVC) 0.2–0.4 Phonons, weak chain coupling
- Wood 0.12 Porous, anisotropic
- Fiberglass / foam insulation 0.03–0.04 Trapped gas dominates
- Air (still) 0.026 —
The physics behind the ranking: metals conduct heat through free electrons , the same carriers that conduct electricity — which is why good electrical conductors are good thermal conductors (the Wiedemann-Franz relationship). Non-metals must rely on phonons (lattice vibrations), which are far less effective. Insulators go further and exploit trapped still air, whose conductivity is only 0.026 0.026 0.026 W/m·K.
Alloying penalty: carbon steel at 50 W/m·K conducts eight times better than 304 stainless at 16 W/m·K, because chromium and nickel atoms scatter the conduction electrons. The same mechanism raises stainless steel's electrical resistivity — one microstructural cause, two property consequences.
Specific Heat and Thermal Diffusivity Q = m c Δ T Q = mc\,\Delta T Q = m c Δ T
- Material c c c (J/kg·K)
- Water 4{,}186
- Aluminum 900
- Steel 486
- Copper 385
- Lead 128
Thermal diffusivity combines conduction and storage to describe how fast a temperature front moves: α diff = k ρ c [ m 2 / s ] \alpha_{\text{diff}} = \frac{k}{\rho c} \qquad [\text{m}^2/\text{s}] α diff = ρ c k [ m 2 / s ]
Do not confuse the two α \alpha α 's. The expansion coefficient α \alpha α has units of 1/°C; thermal diffusivity has units of m²/s. Both are conventionally written α \alpha α , and the units are the only reliable discriminator.
High diffusivity means a material reaches steady state quickly. Copper's α diff ≈ 1.1 × 10 − 4 \alpha_{\text{diff}} \approx 1.1\times10^{-4} α diff ≈ 1.1 × 1 0 − 4 m²/s versus stainless steel's 4 × 10 − 6 4\times10^{-6} 4 × 1 0 − 6 m²/s — a factor of 28, which is why a copper heat sink responds almost immediately while a thick stainless vessel wall lags.
Thermal Shock and Expansion Mismatch
Thermal shock resistance improves with high strength and conductivity and with low expansion and modulus: T S R ∝ σ f k E α TSR \propto \frac{\sigma_f\,k}{E\,\alpha} TSR ∝ E α σ f k
This explains a familiar comparison: borosilicate glass ( α = 3.3 \alpha = 3.3 α = 3.3 ) survives thermal shock that shatters soda-lime glass ( α = 9 \alpha = 9 α = 9 ) — the ratio of expansion coefficients is nearly three to one, and the induced stress scales directly with α \alpha α .
Expansion mismatch in a bonded assembly generates interfacial strain on every cycle: ε mismatch = ( α 1 − α 2 ) Δ T \varepsilon_{\text{mismatch}} = (\alpha_1 - \alpha_2)\,\Delta T ε mismatch = ( α 1 − α 2 ) Δ T
Worked Example: Mismatch Stress in a Bonded Joint
An aluminum plate ( α = 23.6 × 10 − 6 \alpha = 23.6\times10^{-6} α = 23.6 × 1 0 − 6 ) is bonded to a steel plate ( α = 11.7 × 10 − 6 \alpha = 11.7\times10^{-6} α = 11.7 × 1 0 − 6 ). The assembly is cured at 150 °C and cooled to 20 °C. Estimate the mismatch strain and the stress if the aluminum ( E = 69 E = 69 E = 69 GPa) were fully restrained by the steel. Δ T = 20 − 150 = − 130 ° C \Delta T = 20 - 150 = -130\ °\text{C} Δ T = 20 − 150 = − 130 ° C ε mismatch = ( 23.6 − 11.7 ) × 10 − 6 ( − 130 ) = − 1,547 × 10 − 6 = − 0.155 % \varepsilon_{\text{mismatch}} = (23.6 - 11.7)\times10^{-6}(-130) = -1{,}547\times10^{-6} = -0.155\% ε mismatch = ( 23.6 − 11.7 ) × 1 0 − 6 ( − 130 ) = − 1 , 547 × 1 0 − 6 = − 0.155% σ = E ∣ ε ∣ = ( 69 × 10 9 ) ( 1.547 × 10 − 3 ) = 107 MPa \sigma = E\,|\varepsilon| = (69\times10^9)(1.547\times10^{-3}) = \boxed{107\ \text{MPa}} σ = E ∣ ε ∣ = ( 69 × 1 0 9 ) ( 1.547 × 1 0 − 3 ) = 107 MPa
The aluminum wants to shrink more than the steel allows, so it ends up in tension while the steel goes into compression, and the assembly bows toward the aluminum side. At 107 MPa this approaches the yield strength of many aluminum alloys — from cooling alone, with no external load. This is the dominant failure mechanism in solder joints, thermal barrier coatings, and bonded dissimilar-metal assemblies, and the standard remedies are a compliant interlayer, a graded transition, or matching the coefficients.