Study guide
1.2 Differential and Integral Calculus
FE Other Disciplines Fundamentals of Engineering
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Strategy
About the FE Other Disciplines Exam How to Use This Study Guide
2 Chapter 1: Mathematics
1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration
3 Chapter 2: Probability and Statistics
2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression
4 Chapter 3: Chemistry
3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics
5 Chapter 4: Instrumentation and Controls
4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic
6 Chapter 5: Engineering Ethics and Societal Impacts
5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety
7 Chapter 6: Safety, Health, and Environment
6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates
8 Chapter 7: Engineering Economics
7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees
9 Chapter 8: Statics
8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c
10 Chapter 9: Dynamics
9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping
11 Chapter 10: Strength of Materials
10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria
12 Chapter 11: Materials
11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design
13 Chapter 12: Fluid Mechanics
12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law
14 Chapter 13: Basic Electrical Engineering
13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter
15 Chapter 14: Thermodynamics and Heat Transfer
14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart
1.2 Differential and Integral Calculus
Key Takeaways Explain This Topic AI
The FE Reference Handbook gives derivative and integral tables, so exam speed comes from recognizing which rule applies, not from recalling the formula.
Set the first derivative to zero to locate critical points, then use the second-derivative sign to classify a maximum, minimum, or inflection point.
Definite integrals compute area, centroid location, work, and the mean value of a function over an interval.
L'Hopital's rule resolves 0/0 and infinity/infinity indeterminate limits by differentiating numerator and denominator separately.
The gradient of a scalar field points in the direction of steepest increase and is normal to a level surface.
Last updated: August 2026
1.2 Differential and Integral Calculus
Calculus is named in the NCEES Mathematics specification as single-variable calculus , and it underpins nearly every other area of the exam: centroids and moments of inertia are integrals, shear and moment diagrams are derivatives of the load, and every rate process is a differential equation. The Reference Handbook supplies the derivative and integral tables, so exam speed comes from recognizing which rule applies rather than from recall.
Calculus and differential equations represent core tools for modeling continuous physical processes in engineering, including fluid flow, dynamic vibrations, heat transfer, rate reactions, and stress gradients.
- 1. Differential Calculus
- Core Derivative Rules
Let u ( x ) u(x) u ( x ) and v ( x ) v(x) v ( x ) be differentiable functions of x x x :
Product Rule: d d x ( u v ) = u ′ v + u v ′ \frac{d}{dx}(uv) = u'v + uv' d x d ( uv ) = u ′ v + u v ′
Quotient Rule: d d x ( u v ) = u ′ v − u v ′ v 2 \frac{d}{dx}\left(\frac{u}{v}\right) = \frac{u'v - uv'}{v^2} d x d ( v u ) = v 2 u ′ v − u v ′
Chain Rule: d d x [ f ( g ( x ) ) ] = f ′ ( g ( x ) ) ⋅ g ′ ( x ) \frac{d}{dx}[f(g(x))] = f'(g(x)) \cdot g'(x) d x d [ f ( g ( x ))] = f ′ ( g ( x )) ⋅ g ′ ( x )
Exponential & Logarithmic Derivatives: d d x ( e a x ) = a e a x , d d x ( ln x ) = 1 x \frac{d}{dx}(e^{ax}) = a e^{ax}, \quad \frac{d}{dx}(\ln x) = \frac{1}{x} d x d ( e a x ) = a e a x , d x d ( ln x ) = x 1
Trigonometric Derivatives: d d x ( sin x ) = cos x , d d x ( cos x ) = − sin x , d d x ( tan − 1 x ) = 1 1 + x 2 \frac{d}{dx}(\sin x) = \cos x, \quad \frac{d}{dx}(\cos x) = -\sin x, \quad \frac{d}{dx}(\tan^{-1} x) = \frac{1}{1 + x^2} d x d ( sin x ) = cos x , d x d ( cos x ) = − sin x , d x d ( tan − 1 x ) = 1 + x 2 1
Critical Points & Optimization
Critical Points: Occur where f ′ ( x ) = 0 f'(x) = 0 f ′ ( x ) = 0 or f ′ ( x ) f'(x) f ′ ( x ) does not exist.
Second Derivative Test:
If f ′ ( x 0 ) = 0 f'(x_0) = 0 f ′ ( x 0 ) = 0 and f ′ ′ ( x 0 ) > 0 f''(x_0) > 0 f ′′ ( x 0 ) > 0 , x 0 x_0 x 0 is a local minimum .
If f ′ ( x 0 ) = 0 f'(x_0) = 0 f ′ ( x 0 ) = 0 and f ′ ′ ( x 0 ) < 0 f''(x_0) < 0 f ′′ ( x 0 ) < 0 , x 0 x_0 x 0 is a local maximum .
If f ′ ′ ( x 0 ) = 0 f''(x_0) = 0 f ′′ ( x 0 ) = 0 , the test is inconclusive (inflection point candidate).
Multivariable Calculus: Gradient & Directional Derivatives
For a scalar field f ( x , y , z ) f(x, y, z) f ( x , y , z ) :
Gradient Vector: ∇ f = ∂ f ∂ x i + ∂ f ∂ y j + ∂ f ∂ z k \nabla f = \frac{\partial f}{\partial x}\mathbf{i} + \frac{\partial f}{\partial y}\mathbf{j} + \frac{\partial f}{\partial z}\mathbf{k} ∇ f = ∂ x ∂ f i + ∂ y ∂ f j + ∂ z ∂ f k
Directional Derivative: The rate of change of f f f in the direction of unit vector u \mathbf{u} u : D u f = ∇ f ⋅ u D_{\mathbf{u}}f = \nabla f \cdot \mathbf{u} D u f = ∇ f ⋅ u The gradient ∇ f \nabla f ∇ f points in the direction of maximum rate of increase , and ∣ ∇ f ∣ |\nabla f| ∣∇ f ∣ is the maximum directional derivative.
- 2. Integral Calculus & Applications
- Integration Techniques
Integration by Substitution (u-substitution): ∫ f ( g ( x ) ) g ′ ( x ) d x = ∫ f ( u ) d u \int f(g(x))g'(x)dx = \int f(u)du ∫ f ( g ( x )) g ′ ( x ) d x = ∫ f ( u ) d u
- Integration by Parts: ∫ u d v = u v − ∫ v d u \int u \, dv = uv - \int v \, du ∫ u d v = uv − ∫ v d u
- Engineering Applications of Definite Integrals
Area Between Curves: A = ∫ a b [ f ( x ) − g ( x ) ] d x A = \int_a^b [f(x) - g(x)] dx A = ∫ a b [ f ( x ) − g ( x )] d x
Centroid Coordinate ( x ˉ , y ˉ ) (\bar{x}, \bar{y}) ( x ˉ , y ˉ ) of Planar Area: x ˉ = 1 A ∫ x [ f ( x ) − g ( x ) ] d x , y ˉ = 1 2 A ∫ ( [ f ( x ) ] 2 − [ g ( x ) ] 2 ) d x \bar{x} = \frac{1}{A} \int x [f(x) - g(x)] dx, \quad \bar{y} = \frac{1}{2A} \int \left([f(x)]^2 - [g(x)]^2\right) dx x ˉ = A 1 ∫ x [ f ( x ) − g ( x )] d x , y ˉ = 2 A 1 ∫ ( [ f ( x ) ] 2 − [ g ( x ) ] 2 ) d x
Area Moment of Inertia about x-axis ( I x I_x I x ): I x = ∬ y 2 d A I_x = \iint y^2 \, dA I x = ∬ y 2 d A
Volume of Revolution (Disk Method about x-axis): V = π ∫ a b [ f ( x ) ] 2 d x V = \pi \int_a^b [f(x)]^2 dx V = π ∫ a b [ f ( x ) ] 2 d x
Limits, Continuity, and L'Hopital's Rule
A limit describes the value a function approaches, whether or not it is defined there. The FE exam tests limits almost exclusively through indeterminate forms . Indeterminate forms: 0 0 , ∞ ∞ , 0 ⋅ ∞ , ∞ − ∞ , 1 ∞ , 0 0 , ∞ 0 \text{Indeterminate forms: } \frac{0}{0}, \; \frac{\infty}{\infty}, \; 0\cdot\infty, \; \infty-\infty, \; 1^\infty, \; 0^0, \; \infty^0 Indeterminate forms: 0 0 , ∞ ∞ , 0 ⋅ ∞ , ∞ − ∞ , 1 ∞ , 0 0 , ∞ 0
L'Hopital's rule applies only to 0 0 \tfrac{0}{0} 0 0 and ∞ ∞ \tfrac{\infty}{\infty} ∞ ∞ : differentiate the numerator and denominator separately — not as a quotient — and re-evaluate. lim x → a f ( x ) g ( x ) = lim x → a f ′ ( x ) g ′ ( x ) \lim_{x\to a}\frac{f(x)}{g(x)} = \lim_{x\to a}\frac{f'(x)}{g'(x)} x → a lim g ( x ) f ( x ) = x → a lim g ′ ( x ) f ′ ( x )
Repeat if the result is still indeterminate.
Worked example. lim x → 0 1 − cos x x 2 → 0 0 \lim_{x\to 0}\frac{1-\cos x}{x^2} \;\to\; \frac{0}{0} x → 0 lim x 2 1 − cos x → 0 0
First application: lim x → 0 sin x 2 x → 0 0 \displaystyle\lim_{x\to0}\frac{\sin x}{2x} \to \frac{0}{0} x → 0 lim 2 x sin x → 0 0 — still indeterminate.
Second application: lim x → 0 cos x 2 = 1 2 \displaystyle\lim_{x\to0}\frac{\cos x}{2} = \boxed{\frac{1}{2}} x → 0 lim 2 cos x = 2 1
Trap: applying L'Hopital's rule when the form is not indeterminate gives a wrong answer. lim x → 0 sin x 1 + x = 0 1 = 0 \displaystyle\lim_{x\to0}\frac{\sin x}{1+x} = \frac{0}{1} = 0 x → 0 lim 1 + x sin x = 1 0 = 0 directly; differentiating both parts would give cos ( 0 ) / 1 = 1 \cos(0)/1 = 1 cos ( 0 ) /1 = 1 , which is wrong. Always confirm the indeterminate form before differentiating.
Taylor and Maclaurin Series f ( x ) = f ( a ) + f ′ ( a ) ( x − a ) + f ′ ′ ( a ) 2 ! ( x − a ) 2 + f ′ ′ ′ ( a ) 3 ! ( x − a ) 3 + ⋯ f(x) = f(a) + f'(a)(x-a) + \frac{f''(a)}{2!}(x-a)^2 + \frac{f'''(a)}{3!}(x-a)^3 + \cdots f ( x ) = f ( a ) + f ′ ( a ) ( x − a ) + 2 ! f ′′ ( a ) ( x − a ) 2 + 3 ! f ′′′ ( a ) ( x − a ) 3 + ⋯
A Maclaurin series is the special case a = 0 a = 0 a = 0 . The four expansions worth recognizing on sight: ≠ x = 1 + x + x 2 2 ! + x 3 3 ! + ⋯ sin x = x − x 3 3 ! + x 5 5 ! − ⋯ \ne^x = 1 + x + \frac{x^2}{2!} + \frac{x^3}{3!}+\cdots \qquad \sin x = x - \frac{x^3}{3!} + \frac{x^5}{5!}-\cdots = x = 1 + x + 2 ! x 2 + 3 ! x 3 + ⋯ sin x = x − 3 ! x 3 + 5 ! x 5 − ⋯ cos x = 1 − x 2 2 ! + x 4 4 ! − ⋯ 1 1 − x = 1 + x + x 2 + x 3 + ⋯ ( ∣ x ∣ < 1 ) \cos x = 1 - \frac{x^2}{2!} + \frac{x^4}{4!}-\cdots \qquad \frac{1}{1-x} = 1 + x + x^2 + x^3 + \cdots \;\;(|x|<1) cos x = 1 − 2 ! x 2 + 4 ! x 4 − ⋯ 1 − x 1 = 1 + x + x 2 + x 3 + ⋯ ( ∣ x ∣ < 1 )
Why this matters beyond mathematics. The small-angle approximations sin θ ≈ θ \sin\theta \approx \theta sin θ ≈ θ and cos θ ≈ 1 − θ 2 / 2 \cos\theta \approx 1 - \theta^2/2 cos θ ≈ 1 − θ 2 /2 are the first terms of these series, and they are what make the simple-pendulum equation linear in the Dynamics chapter. Truncating a series is also the basis of the numerical methods in the next section.
Applications That Recur Across the Exam
Quantity Integral form Where it appears
Area between curves ∫ a b [ f ( x ) − g ( x ) ] d x \int_a^b[f(x)-g(x)]\,dx ∫ a b [ f ( x ) − g ( x )] d x Load diagrams, work
Arc length ∫ a b 1 + ( f ′ ) 2 d x \int_a^b\sqrt{1+(f')^2}\,dx ∫ a b 1 + ( f ′ ) 2 d x Cable and belt problems
Volume of revolution (disk) π ∫ a b [ f ( x ) ] 2 d x \pi\int_a^b[f(x)]^2dx π ∫ a b [ f ( x ) ] 2 d x Tank and vessel volumes
Average value of a function 1 b − a ∫ a b f ( x ) d x \dfrac{1}{b-a}\int_a^b f(x)\,dx b − a 1 ∫ a b f ( x ) d x Mean velocity, RMS precursor
- Work by a variable force ∫ a b F ( x ) d x \int_a^b F(x)\,dx ∫ a b F ( x ) d x Springs, gas compression
- Change in shear along a beam − ∫ w ( x ) d x -\int w(x)\,dx − ∫ w ( x ) d x Shear and moment diagrams
- Change in moment along a beam ∫ V ( x ) d x \int V(x)\,dx ∫ V ( x ) d x Shear and moment diagrams
- Worked Example: Average Value and Work
A spring has a nonlinear force law F ( x ) = 400 x + 1,200 x 2 F(x) = 400x + 1{,}200x^2 F ( x ) = 400 x + 1 , 200 x 2 N, with x x x in metres. Find the work to compress it from 0 to 0.30 m, and the average force over that interval.
Work: W = ∫ 0 0.30 ( 400 x + 1,200 x 2 ) d x = [ 200 x 2 + 400 x 3 ] 0 0.30 W = \int_0^{0.30}(400x + 1{,}200x^2)\,dx = \left[200x^2 + 400x^3\right]_0^{0.30} W = ∫ 0 0.30 ( 400 x + 1 , 200 x 2 ) d x = [ 200 x 2 + 400 x 3 ] 0 0.30 W = 200 ( 0.09 ) + 400 ( 0.027 ) = 18.0 + 10.8 = 28.8 J W = 200(0.09) + 400(0.027) = 18.0 + 10.8 = \boxed{28.8\ \text{J}} W = 200 ( 0.09 ) + 400 ( 0.027 ) = 18.0 + 10.8 = 28.8 J
Average force: F ˉ = W Δ x = 28.8 0.30 = 96.0 N \bar{F} = \frac{W}{\Delta x} = \frac{28.8}{0.30} = 96.0\ \text{N} F ˉ = Δ x W = 0.30 28.8 = 96.0 N
Check against the endpoint force: F ( 0.30 ) = 400 ( 0.30 ) + 1,200 ( 0.09 ) = 120 + 108 = 228 F(0.30) = 400(0.30) + 1{,}200(0.09) = 120 + 108 = 228 F ( 0.30 ) = 400 ( 0.30 ) + 1 , 200 ( 0.09 ) = 120 + 108 = 228 N. The average of 96.0 N is well below half the peak force of 228 N, because the quadratic term concentrates the force near the end of travel. A linear spring of the same final force would store 1 2 ( 228 ) ( 0.30 ) = 34.2 \tfrac{1}{2}(228)(0.30) = 34.2 2 1 ( 228 ) ( 0.30 ) = 34.2 J — more than the actual 28.8 J.
Trap: for a linear spring, W = 1 2 k x 2 W = \tfrac{1}{2}kx^2 W = 2 1 k x 2 and the average force is exactly half the peak. That shortcut fails the moment the force law is nonlinear, and the exam supplies nonlinear force laws precisely to catch its misuse. Integrate whenever the force is not proportional to displacement.