Study guide

2.3 Estimation, Confidence Intervals, and Sample Sizes

FE Other Disciplines Fundamentals of Engineering

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Strategy

About the FE Other Disciplines Exam How to Use This Study Guide

2 Chapter 1: Mathematics

1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration

3 Chapter 2: Probability and Statistics

2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression

4 Chapter 3: Chemistry

3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics

5 Chapter 4: Instrumentation and Controls

4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic

6 Chapter 5: Engineering Ethics and Societal Impacts

5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety

7 Chapter 6: Safety, Health, and Environment

6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates

8 Chapter 7: Engineering Economics

7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees

9 Chapter 8: Statics

8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c

10 Chapter 9: Dynamics

9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping

11 Chapter 10: Strength of Materials

10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria

12 Chapter 11: Materials

11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design

13 Chapter 12: Fluid Mechanics

12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law

14 Chapter 13: Basic Electrical Engineering

13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter

15 Chapter 14: Thermodynamics and Heat Transfer

14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart

2.3 Estimation, Confidence Intervals, and Sample Sizes

Key Takeaways Explain This Topic AI

The sample variance divides by n-1 rather than n because one degree of freedom is consumed estimating the mean, which removes the downward bias.

Use the z critical value when the population standard deviation is known and the t value with n-1 degrees of freedom when it is estimated from the sample.

The 95% two-sided z critical value is 1.960 and the 99% value is 2.576.

A 95% confidence level describes the long-run success rate of the procedure, not the probability that this particular interval contains the parameter.

Required sample size varies with the inverse square of the margin of error, so halving the allowable error quadruples the sample size, and results are always rounded up.

Last updated: August 2026

2.3 Estimation, Confidence Intervals, and Sample Sizes

Statistical inference enables engineers to draw valid conclusions about population parameters from sample measurements. This section covers the Central Limit Theorem, confidence interval construction, hypothesis testing methodology for population means, and simple linear regression and correlation analysis as specified in the NCEES FE Reference Handbook.

1. Central Limit Theorem (CLT)

The Central Limit Theorem is the foundation of inferential statistics. It states that for any independent, identically distributed (i.i.d.) random variables X 1 , X 2 , … , X n X_1, X_2, \dots, X_n X 1 ​ , X 2 ​ , … , X n ​ with population mean μ \mu μ and finite variance σ 2 \sigma^2 σ 2 , as sample size n n n increases ( n ≥ 30 n \ge 30 n ≥ 30 in practice), the distribution of the sample mean X ˉ \bar{X} X ˉ approaches a normal distribution : X ˉ ∼ N ( μ , σ 2 n ) \bar{X} \sim N\left(\mu, \frac{\sigma^2}{n}\right) X ˉ ∼ N ( μ , n σ 2 ​ )

The standard deviation of the sampling distribution of X ˉ \bar{X} X ˉ is the standard error : σ x ˉ = σ n \sigma_{\bar{x}} = \frac{\sigma}{\sqrt{n}} σ x ˉ ​ = n ​ σ ​

Regardless of whether the underlying population is skewed or non-normal, sample means drawn from large samples ( n ≥ 30 n \ge 30 n ≥ 30 ) can be analyzed using standard normal Z Z Z -transformations: Z = X ˉ − μ σ / n Z = \frac{\bar{X} - \mu}{\sigma / \sqrt{n}} Z = σ / n ​ X ˉ − μ ​

Loading diagram... Hypothesis Testing & Linear Regression Decision Workflow

2. Confidence Intervals (CI)

A confidence interval provides an estimated range likely to contain an unknown population parameter at a specified confidence level 1 − α 1 - \alpha 1 − α (such as 90%, 95%, or 99%).

A. Confidence Interval for Population Mean μ \mu μ (Known σ \sigma σ )

When population standard deviation σ \sigma σ is known (or n ≥ 30 n \ge 30 n ≥ 30 by CLT): CI: x ˉ ± z α / 2 ( σ n ) \text{CI: } \bar{x} \pm z_{\alpha/2} \left( \frac{\sigma}{\sqrt{n}} \right) CI: x ˉ ± z α /2 ​ ( n ​ σ ​ )

Where z α / 2 z_{\alpha/2} z α /2 ​ is the standard normal critical value:

90% Confidence ( 1 − α = 0.90 1 - \alpha = 0.90 1 − α = 0.90 ): z 0.05 = 1.645 z_{0.05} = 1.645 z 0.05 ​ = 1.645

95% Confidence ( 1 − α = 0.95 1 - \alpha = 0.95 1 − α = 0.95 ): z 0.025 = 1.960 z_{0.025} = 1.960 z 0.025 ​ = 1.960

99% Confidence ( 1 − α = 0.99 1 - \alpha = 0.99 1 − α = 0.99 ): z 0.005 = 2.576 z_{0.005} = 2.576 z 0.005 ​ = 2.576

B. Confidence Interval for Population Mean μ \mu μ (Unknown σ \sigma σ , Small n < 30 n < 30 n < 30 )

When population standard deviation σ \sigma σ is unknown and sample size is small ( n < 30 n < 30 n < 30 ), use Student's t t t -distribution with d f = n − 1 df = n - 1 df = n − 1 degrees of freedom: CI: x ˉ ± t α / 2 , n − 1 ( s n ) \text{CI: } \bar{x} \pm t_{\alpha/2, n-1} \left( \frac{s}{\sqrt{n}} \right) CI: x ˉ ± t α /2 , n − 1 ​ ( n ​ s ​ )

C. Confidence Interval for Population Proportion p p p

For sample proportion p ^ = x / n \hat{p} = x / n p ^ ​ = x / n : CI: p ^ ± z α / 2 p ^ ( 1 − p ^ ) n \text{CI: } \hat{p} \pm z_{\alpha/2} \sqrt{\frac{\hat{p}(1 - \hat{p})}{n}} CI: p ^ ​ ± z α /2 ​ n p ^ ​ ( 1 − p ^ ​ ) ​ ​

Worked Engineering Example: Small Sample t t t -Confidence Interval

Problem: A structural engineer tests n = 16 n = 16 n = 16 aluminum alloy samples, obtaining a sample mean yield strength x ˉ = 210.0 MPa \bar{x} = 210.0\text{ MPa} x ˉ = 210.0 MPa and a sample standard deviation s = 12.0 MPa s = 12.0\text{ MPa} s = 12.0 MPa . Construct a 95% confidence interval for the true mean yield strength of the alloy. (Critical value t 0.025 , 15 = 2.131 t_{0.025, 15} = 2.131 t 0.025 , 15 ​ = 2.131 ).

Solution: Step 1: Identify Parameters: n = 16 , d f = n − 1 = 15 , x ˉ = 210.0 MPa , s = 12.0 MPa , t 0.025 , 15 = 2.131 n = 16, \quad df = n - 1 = 15, \quad \bar{x} = 210.0\text{ MPa}, \quad s = 12.0\text{ MPa}, \quad t_{0.025, 15} = 2.131 n = 16 , df = n − 1 = 15 , x ˉ = 210.0 MPa , s = 12.0 MPa , t 0.025 , 15 ​ = 2.131

Step 2: Calculate Margin of Error (ME): M E = t α / 2 , d f × ( s n ) = 2.131 × ( 12.0 16 ) = 2.131 × 3.0 = 6.393 MPa ME = t_{\alpha/2, df} \times \left( \frac{s}{\sqrt{n}} \right) = 2.131 \times \left( \frac{12.0}{\sqrt{16}} \right) = 2.131 \times 3.0 = 6.393\text{ MPa} ME = t α /2 , df ​ × ( n ​ s ​ ) = 2.131 × ( 16 ​ 12.0 ​ ) = 2.131 × 3.0 = 6.393 MPa (Wait, let me double check: 12 / 4 = 3.0; 2.131 * 3.0 = 6.393 MPa)

Step 3: Construct Confidence Interval bounds: Lower Limit = 210.0 − 6.393 = 203.607 MPa \text{Lower Limit} = 210.0 - 6.393 = 203.607\text{ MPa} Lower Limit = 210.0 − 6.393 = 203.607 MPa Upper Limit = 210.0 + 6.393 = 216.393 MPa \text{Upper Limit} = 210.0 + 6.393 = 216.393\text{ MPa} Upper Limit = 210.0 + 6.393 = 216.393 MPa 95 % CI: [ 203.61 , 216.39 ] MPa 95\% \text{ CI: } [203.61, 216.39]\text{ MPa} 95% CI: [ 203.61 , 216.39 ] MPa

Point Estimation and the Language of Estimators

NCEES lists "Estimation (e.g., point, confidence intervals)" as the first Probability and Statistics sub-topic, so the vocabulary itself is examinable.

Term Meaning

Point estimate A single value computed from the sample, such as x ˉ \bar{x} x ˉ for μ \mu μ or s s s for σ \sigma σ

  • Estimator The rule or formula; the estimate is the number it produces
  • Unbiased The estimator's expected value equals the true parameter

Standard error The standard deviation of the estimator itself: σ / n \sigma/\sqrt{n} σ / n ​ for the sample mean

Interval estimate A range, with a stated confidence level, expected to contain the parameter

Why the sample variance divides by n − 1 n-1 n − 1 . Dividing by n n n systematically underestimates the population variance, because deviations are measured from x ˉ \bar{x} x ˉ — itself computed from the same data — rather than from the unknown true mean μ \mu μ . The n − 1 n-1 n − 1 divisor ( Bessel's correction ) removes that bias, and n − 1 n-1 n − 1 is the degrees of freedom : one is consumed by estimating the mean. s 2 = ∑ ( x i − x ˉ ) 2 n − 1 (unbiased) s^2 = \frac{\sum(x_i-\bar{x})^2}{n-1} \qquad\text{(unbiased)} s 2 = n − 1 ∑ ( x i ​ − x ˉ ) 2 ​ (unbiased)

Choosing Between z and t

  • Situation Use Critical value
  • σ \sigma σ known (any n n n ) z z z 1.645 (90%), 1.960 (95%) , 2.576 (99%)
  • σ \sigma σ unknown , estimated by s s s t t t with ν = n − 1 \nu = n-1 ν = n − 1 From the t t t table

σ \sigma σ unknown but n n n large (> ~30) t ≈ z t \approx z t ≈ z The t t t table converges on z z z x ˉ ± z σ n x ˉ ± t α / 2 , n − 1 s n \bar{x} \pm z\frac{\sigma}{\sqrt{n}} \qquad\qquad \bar{x} \pm t_{\alpha/2,\,n-1}\frac{s}{\sqrt{n}} x ˉ ± z n ​ σ ​ x ˉ ± t α /2 , n − 1 ​ n ​ s ​

The t t t distribution has heavier tails than the normal, so its critical values are always larger — the interval is wider, which is the honest price of not knowing σ \sigma σ . At n = 5 n = 5 n = 5 , t 0.025 , 4 = 2.776 t_{0.025,4} = 2.776 t 0.025 , 4 ​ = 2.776 against z = 1.960 z = 1.960 z = 1.960 : a 42% wider interval. By n = 30 n = 30 n = 30 , t 0.025 , 29 = 2.045 t_{0.025,29} = 2.045 t 0.025 , 29 ​ = 2.045 , only 4% wider.

What a Confidence Level Actually Means

A 95% confidence interval means that if the sampling procedure were repeated many times, 95% of the intervals so constructed would contain the true parameter. It does not mean there is a 95% probability that the parameter lies inside this particular interval — the parameter is a fixed constant, and this interval either contains it or does not.

This distinction is a favorite conceptual item. Two related traps:

A confidence interval for the mean is much narrower than the spread of individual values. An interval of [ 48.2 , 51.8 ] [48.2, 51.8] [ 48.2 , 51.8 ] for the mean does not imply that 95% of individual measurements fall in that range.

Raising the confidence level widens the interval. You cannot become more confident and more precise at the same time without collecting more data.

Sample Size Determination

Setting the margin of error E = z σ n E = z\dfrac{\sigma}{\sqrt{n}} E = z n ​ σ ​ and solving: n = ( z σ E ) 2 (for a mean) , n = z 2 p ( 1 − p ) E 2 (for a proportion) n = \left(\frac{z\sigma}{E}\right)^2 \qquad\text{(for a mean)}, \qquad n = \frac{z^2p(1-p)}{E^2} \qquad\text{(for a proportion)} n = ( E z σ ​ ) 2 (for a mean) , n = E 2 z 2 p ( 1 − p ) ​ (for a proportion)

Always round up. Rounding down would leave the margin of error larger than specified.

Because n n n depends on E − 2 E^{-2} E − 2 :

  • Change in required precision Effect on n n n
  • Halve the margin of error 4× the sample size
  • Cut the margin to one-third 9× the sample size
  • Halve the sample size Margin of error grows by 2 = 1.41 \sqrt{2} = 1.41 2 ​ = 1.41

For a proportion with no prior estimate , use p = 0.5 p = 0.5 p = 0.5 : it maximizes p ( 1 − p ) p(1-p) p ( 1 − p ) at 0.25 and therefore gives the conservative (largest) required sample size, guaranteeing the target margin whatever the true proportion turns out to be.