Study guide

2.1 Probability Distributions, PMFs, and PDFs

FE Other Disciplines Fundamentals of Engineering

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Strategy

About the FE Other Disciplines Exam How to Use This Study Guide

2 Chapter 1: Mathematics

1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration

3 Chapter 2: Probability and Statistics

2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression

4 Chapter 3: Chemistry

3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics

5 Chapter 4: Instrumentation and Controls

4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic

6 Chapter 5: Engineering Ethics and Societal Impacts

5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety

7 Chapter 6: Safety, Health, and Environment

6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates

8 Chapter 7: Engineering Economics

7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees

9 Chapter 8: Statics

8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c

10 Chapter 9: Dynamics

9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping

11 Chapter 10: Strength of Materials

10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria

12 Chapter 11: Materials

11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design

13 Chapter 12: Fluid Mechanics

12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law

14 Chapter 13: Basic Electrical Engineering

13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter

15 Chapter 14: Thermodynamics and Heat Transfer

14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart

2.1 Probability Distributions, PMFs, and PDFs

Key Takeaways Explain This Topic AI

Conditional probability P(A|B) = P(A ∩ B) / P(B) and Bayes' Theorem enable updating failure or defect probabilities based on observational or test evidence.

The Binomial distribution models discrete independent trials with constant success probability p, yielding mean mu = n p and variance sigma^2 = n p*(1-p).

The Poisson distribution describes random event counts occurring at a constant average rate lambda over a fixed interval, where both mean and variance equal lambda.

Continuous random variables are defined by PDFs where the total area under f(x) equals 1, and standard normal variables are transformed via Z = (X - mu) / sigma.

The Exponential distribution models component time-to-failure for constant failure rate systems, featuring memoryless reliability R(t) = e^(-lambda*t) and mean MTBF = 1/lambda.

Last updated: August 2026

2.1 Probability Distributions, PMFs, and PDFs

Probability and statistics provide the mathematical foundation for managing uncertainty, evaluating component reliability, performing quality control, and interpreting experimental data on the FE Other Disciplines exam. This section covers the fundamental rules of probability, conditional probability, Bayes' Theorem, and the primary discrete and continuous distributions specified in the NCEES FE Reference Handbook.

1. Fundamentals of Probability

An event A A A is a subset of a sample space S S S . The probability of an event P ( A ) P(A) P ( A ) satisfies the basic Kolmogorov axioms:

  • 0 ≤ P ( A ) ≤ 1 0 \le P(A) \le 1 0 ≤ P ( A ) ≤ 1
  • P ( S ) = 1 P(S) = 1 P ( S ) = 1

For mutually exclusive (disjoint) events A A A and B B B , P ( A ∪ B ) = P ( A ) + P ( B ) P(A \cup B) = P(A) + P(B) P ( A ∪ B ) = P ( A ) + P ( B )

Union and Intersection Rules

For any two events A A A and B B B , the general addition rule is: P ( A ∪ B ) = P ( A ) + P ( B ) − P ( A ∩ B ) P(A \cup B) = P(A) + P(B) - P(A \cap B) P ( A ∪ B ) = P ( A ) + P ( B ) − P ( A ∩ B )

If A A A and B B B are independent , the occurrence of one does not alter the probability of the other, so: P ( A ∩ B ) = P ( A ) × P ( B ) P(A \cap B) = P(A) \times P(B) P ( A ∩ B ) = P ( A ) × P ( B )

Conditional Probability and Bayes' Theorem

The conditional probability of event A A A occurring given that event B B B has already occurred is: P ( A ∣ B ) = P ( A ∩ B ) P ( B ) for P ( B ) > 0 P(A|B) = \frac{P(A \cap B)}{P(B)} \quad \text{for } P(B) > 0 P ( A ∣ B ) = P ( B ) P ( A ∩ B ) ​ for P ( B ) > 0

By rearranging, the multiplication rule is P ( A ∩ B ) = P ( A ∣ B ) P ( B ) = P ( B ∣ A ) P ( A ) P(A \cap B) = P(A|B) P(B) = P(B|A) P(A) P ( A ∩ B ) = P ( A ∣ B ) P ( B ) = P ( B ∣ A ) P ( A ) .

Law of Total Probability

If A 1 , A 2 , … , A k A_1, A_2, \dots, A_k A 1 ​ , A 2 ​ , … , A k ​ form a partition of the sample space S S S (mutually exclusive and exhaustive), then for any event B B B : P ( B ) = ∑ i = 1 k P ( B ∣ A i ) P ( A i ) P(B) = \sum_{i=1}^k P(B|A_i) P(A_i) P ( B ) = i = 1 ∑ k ​ P ( B ∣ A i ​ ) P ( A i ​ )

Bayes' Theorem

Bayes' Theorem allows updating prior probabilities P ( A k ) P(A_k) P ( A k ​ ) based on observed evidence B B B : P ( A k ∣ B ) = P ( B ∣ A k ) P ( A k ) ∑ i = 1 k P ( B ∣ A i ) P ( A i ) P(A_k|B) = \frac{P(B|A_k) P(A_k)}{\sum_{i=1}^k P(B|A_i) P(A_i)} P ( A k ​ ∣ B ) = ∑ i = 1 k ​ P ( B ∣ A i ​ ) P ( A i ​ ) P ( B ∣ A k ​ ) P ( A k ​ ) ​

Worked Engineering Example: Quality Inspection & Bayes' Theorem

Problem: A manufacturing plant operates two automated assembly lines. Line 1 produces 60% of all electronic control units (ECUs) and has a defect rate of 2.0%. Line 2 produces 40% of all ECUs and has a defect rate of 5.0%. If an ECU selected at random is found to be defective, what is the probability it was manufactured on Line 2?

Solution: Let L 1 L_1 L 1 ​ and L 2 L_2 L 2 ​ be the events that an ECU comes from Line 1 and Line 2, respectively. Let D D D be the event that an ECU is defective.

Given parameters:

P ( L 1 ) = 0.60 , P ( L 2 ) = 0.40 P(L_1) = 0.60, \quad P(L_2) = 0.40 P ( L 1 ​ ) = 0.60 , P ( L 2 ​ ) = 0.40

P ( D ∣ L 1 ) = 0.020 , P ( D ∣ L 2 ) = 0.050 P(D|L_1) = 0.020, \quad P(D|L_2) = 0.050 P ( D ∣ L 1 ​ ) = 0.020 , P ( D ∣ L 2 ​ ) = 0.050

Step 1: Compute overall probability of a defect P ( D ) P(D) P ( D ) using Total Probability: P ( D ) = P ( D ∣ L 1 ) P ( L 1 ) + P ( D ∣ L 2 ) P ( L 2 ) P(D) = P(D|L_1)P(L_1) + P(D|L_2)P(L_2) P ( D ) = P ( D ∣ L 1 ​ ) P ( L 1 ​ ) + P ( D ∣ L 2 ​ ) P ( L 2 ​ ) P ( D ) = ( 0.020 ) ( 0.60 ) + ( 0.050 ) ( 0.40 ) = 0.012 + 0.020 = 0.032 ( 3.2 % ) P(D) = (0.020)(0.60) + (0.050)(0.40) = 0.012 + 0.020 = 0.032 \quad (3.2\%) P ( D ) = ( 0.020 ) ( 0.60 ) + ( 0.050 ) ( 0.40 ) = 0.012 + 0.020 = 0.032 ( 3.2% )

Step 2: Apply Bayes' Theorem to find P ( L 2 ∣ D ) P(L_2|D) P ( L 2 ​ ∣ D ) : P ( L 2 ∣ D ) = P ( D ∣ L 2 ) P ( L 2 ) P ( D ) = 0.020 0.032 = 0.625 ( 62.5 % ) P(L_2|D) = \frac{P(D|L_2)P(L_2)}{P(D)} = \frac{0.020}{0.032} = 0.625 \quad (62.5\%) P ( L 2 ​ ∣ D ) = P ( D ) P ( D ∣ L 2 ​ ) P ( L 2 ​ ) ​ = 0.032 0.020 ​ = 0.625 ( 62.5% ) Conclusion: Although Line 2 produces fewer total units, a defective unit has a 62.5% probability of coming from Line 2 because of its higher defect rate.

Loading diagram... Probability Distribution Classification & NCEES Parameters

2. Discrete Probability Distributions (PMFs)

A discrete random variable X X X takes on distinct, countable values. Its probability distribution is defined by a Probability Mass Function (PMF) p ( x ) = P ( X = x ) p(x) = P(X = x) p ( x ) = P ( X = x ) , where: ∑ all x p ( x ) = 1 and p ( x ) ≥ 0 \sum_{\text{all } x} p(x) = 1 \quad \text{and} \quad p(x) \ge 0 all x ∑ ​ p ( x ) = 1 and p ( x ) ≥ 0

A. Binomial Distribution

The Binomial distribution models the number of successes X = k X = k X = k in n n n independent Bernoulli trials, each having a constant probability of success p p p (and failure probability q = 1 − p q = 1 - p q = 1 − p ).

NCEES Formula P ( X = k ) = ( n k ) p k ( 1 − p ) n − k = n ! k ! ( n − k ) ! p k ( 1 − p ) n − k P(X = k) = \binom{n}{k} p^k (1-p)^{n-k} = \frac{n!}{k!(n-k)!} p^k (1-p)^{n-k} P ( X = k ) = ( k n ​ ) p k ( 1 − p ) n − k = k ! ( n − k )! n ! ​ p k ( 1 − p ) n − k Mean: μ = n p \text{Mean: } \mu = n p Mean: μ = n p Variance: σ 2 = n p ( 1 − p ) \text{Variance: } \sigma^2 = n p (1-p) Variance: σ 2 = n p ( 1 − p ) Standard Deviation: σ = n p ( 1 − p ) \text{Standard Deviation: } \sigma = \sqrt{n p (1-p)} Standard Deviation: σ = n p ( 1 − p ) ​

B. Poisson Distribution

The Poisson distribution models the number of rare events X = x X = x X = x occurring randomly across a continuous interval of time, length, area, or volume at a constant average rate λ \lambda λ .

NCEES Formula P ( X = x ) = λ x e − λ x ! , x = 0 , 1 , 2 , … P(X = x) = \frac{\lambda^x e^{-\lambda}}{x!}, \quad x = 0, 1, 2, \dots P ( X = x ) = x ! λ x e − λ ​ , x = 0 , 1 , 2 , … Mean: μ = λ \text{Mean: } \mu = \lambda Mean: μ = λ Variance: σ 2 = λ \text{Variance: } \sigma^2 = \lambda Variance: σ 2 = λ

If the rate is given as μ 0 \mu_0 μ 0 ​ per unit interval and the interval length is t t t , then λ = μ 0 t \lambda = \mu_0 t λ = μ 0 ​ t .

Worked Engineering Example: Binomial & Poisson Calculations

Problem A (Binomial): A quality control engineer samples n = 10 n = 10 n = 10 structural bolts from a batch with a known defect rate of p = 0.05 p = 0.05 p = 0.05 . Calculate the probability of finding exactly 2 defective bolts, and find the mean and variance of defective bolts per sample.

Solution A: P ( X = 2 ) = ( 10 2 ) ( 0.05 ) 2 ( 0.95 ) 10 − 2 = 10 × 9 2 × 1 ( 0.0025 ) ( 0.66342 ) = 45 × 0.0025 × 0.66342 = 0.0746 ( 7.46 % ) P(X = 2) = \binom{10}{2} (0.05)^2 (0.95)^{10-2} = \frac{10 \times 9}{2 \times 1} (0.0025)(0.66342) = 45 \times 0.0025 \times 0.66342 = 0.0746 \quad (7.46\%) P ( X = 2 ) = ( 2 10 ​ ) ( 0.05 ) 2 ( 0.95 ) 10 − 2 = 2 × 1 10 × 9 ​ ( 0.0025 ) ( 0.66342 ) = 45 × 0.0025 × 0.66342 = 0.0746 ( 7.46% ) Mean μ = n p = 10 × 0.05 = 0.50 \mu = np = 10 \times 0.05 = 0.50 μ = n p = 10 × 0.05 = 0.50 bolts.

Variance σ 2 = n p ( 1 − p ) = 10 × 0.05 × 0.95 = 0.475 \sigma^2 = np(1-p) = 10 \times 0.05 \times 0.95 = 0.475 σ 2 = n p ( 1 − p ) = 10 × 0.05 × 0.95 = 0.475 bolts 2 ^2 2 .

Problem B (Poisson): Microscopic surface cracks in a turbine blade occur at an average rate of μ 0 = 1.5 \mu_0 = 1.5 μ 0 ​ = 1.5 cracks per meter. Find the probability that a 2-meter section of blade has exactly 3 cracks.

Solution B: For a length t = 2 m t = 2\text{ m} t = 2 m , the expected number of cracks is λ = μ 0 t = 1.5 × 2 = 3.0 \lambda = \mu_0 t = 1.5 \times 2 = 3.0 λ = μ 0 ​ t = 1.5 × 2 = 3.0 . P ( X = 3 ) = 3.0 3 ⋅ e − 3.0 3 ! = 27 × 0.049787 6 = 0.2240 ( 22.40 % ) P(X = 3) = \frac{3.0^3 \cdot e^{-3.0}}{3!} = \frac{27 \times 0.049787}{6} = 0.2240 \quad (22.40\%) P ( X = 3 ) = 3 ! 3. 0 3 ⋅ e − 3.0 ​ = 6 27 × 0.049787 ​ = 0.2240 ( 22.40% ) .

3. Continuous Probability Distributions (PDFs)

A continuous random variable X X X can take any real value within a continuous range. Its distribution is defined by a Probability Density Function (PDF) f ( x ) f(x) f ( x ) , where: ∫ − ∞ ∞ f ( x ) d x = 1 and f ( x ) ≥ 0 \int_{-\infty}^{\infty} f(x) dx = 1 \quad \text{and} \quad f(x) \ge 0 ∫ − ∞ ∞ ​ f ( x ) d x = 1 and f ( x ) ≥ 0

For continuous variables, the probability at any single point is zero: P ( X = a ) = 0 P(X = a) = 0 P ( X = a ) = 0 . Probabilities are evaluated over intervals using the Cumulative Distribution Function (CDF) F ( x ) F(x) F ( x ) : P ( a ≤ X ≤ b ) = F ( b ) − F ( a ) = ∫ a b f ( x ) d x P(a \le X \le b) = F(b) - F(a) = \int_a^b f(x) dx P ( a ≤ X ≤ b ) = F ( b ) − F ( a ) = ∫ a b ​ f ( x ) d x

A. Continuous Uniform Distribution

A continuous random variable X X X uniformly distributed over interval [ a , b ] [a, b] [ a , b ] has equal probability density across its domain.

NCEES Formula f ( x ) = 1 b − a , a ≤ x ≤ b f(x) = \frac{1}{b - a}, \quad a \le x \le b f ( x ) = b − a 1 ​ , a ≤ x ≤ b Mean: μ = a + b 2 \text{Mean: } \mu = \frac{a + b}{2} Mean: μ = 2 a + b ​ Variance: σ 2 = ( b − a ) 2 12 \text{Variance: } \sigma^2 = \frac{(b - a)^2}{12} Variance: σ 2 = 12 ( b − a ) 2 ​

B. Normal (Gaussian) Distribution

The Normal distribution is symmetric and bell-shaped, parameterized by mean μ \mu μ and variance σ 2 \sigma^2 σ 2 .

NCEES Formula f ( x ) = 1 σ 2 π exp ⁡ ( − ( x − μ ) 2 2 σ 2 ) , − ∞ < x < ∞ f(x) = \frac{1}{\sigma \sqrt{2\pi}} \exp \left( -\frac{(x - \mu)^2}{2\sigma^2} \right), \quad -\infty < x < \infty f ( x ) = σ 2 π ​ 1 ​ exp ( − 2 σ 2 ( x − μ ) 2 ​ ) , − ∞ < x < ∞ Standard Normal Transformation: Z = X − μ σ \text{Standard Normal Transformation: } Z = \frac{X - \mu}{\sigma} Standard Normal Transformation: Z = σ X − μ ​

To find probabilities for X ∼ N ( μ , σ 2 ) X \sim N(\mu, \sigma^2) X ∼ N ( μ , σ 2 ) , transform to the standard normal distribution Z ∼ N ( 0 , 1 ) Z \sim N(0, 1) Z ∼ N ( 0 , 1 ) and look up probabilities in the standard normal cumulative table Φ ( z ) = P ( Z ≤ z ) \Phi(z) = P(Z \le z) Φ ( z ) = P ( Z ≤ z ) . Key standard normal probabilities:

  • P ( − 1 ≤ Z ≤ 1 ) ≈ 68.27 % P(-1 \le Z \le 1) \approx 68.27\% P ( − 1 ≤ Z ≤ 1 ) ≈ 68.27%
  • P ( − 2 ≤ Z ≤ 2 ) ≈ 95.45 % P(-2 \le Z \le 2) \approx 95.45\% P ( − 2 ≤ Z ≤ 2 ) ≈ 95.45%
  • P ( − 3 ≤ Z ≤ 3 ) ≈ 99.73 % P(-3 \le Z \le 3) \approx 99.73\% P ( − 3 ≤ Z ≤ 3 ) ≈ 99.73%
  • C. Exponential Distribution

The Exponential distribution models the continuous time between Poisson events or component time-to-failure under a constant failure rate λ \lambda λ .

NCEES Formula f ( x ) = λ e − λ x , x ≥ 0 f(x) = \lambda e^{-\lambda x}, \quad x \ge 0 f ( x ) = λ e − λ x , x ≥ 0 CDF: F ( x ) = P ( X ≤ x ) = 1 − e − λ x \text{CDF: } F(x) = P(X \le x) = 1 - e^{-\lambda x} CDF: F ( x ) = P ( X ≤ x ) = 1 − e − λ x Reliability Function: R ( t ) = P ( X > t ) = e − λ t \text{Reliability Function: } R(t) = P(X > t) = e^{-\lambda t} Reliability Function: R ( t ) = P ( X > t ) = e − λ t Mean (MTBF): μ = 1 λ \text{Mean (MTBF): } \mu = \frac{1}{\lambda} Mean (MTBF): μ = λ 1 ​ Variance: σ 2 = 1 λ 2 \text{Variance: } \sigma^2 = \frac{1}{\lambda^2} Variance: σ 2 = λ 2 1 ​

The Exponential distribution is memoryless : P ( T > t + s ∣ T > s ) = P ( T > t ) P(T > t + s \mid T > s) = P(T > t) P ( T > t + s ∣ T > s ) = P ( T > t ) .

4. Worked Engineering Example: Normal Distribution & Reliability

Problem: Compressive strength tests of concrete batches yield a normal distribution with mean μ = 35.0 MPa \mu = 35.0\text{ MPa} μ = 35.0 MPa and standard deviation σ = 4.0 MPa \sigma = 4.0\text{ MPa} σ = 4.0 MPa . Structural design standards require a minimum compressive strength of 30.0 MPa 30.0\text{ MPa} 30.0 MPa .

What fraction of concrete batches will fail to meet the 30.0 MPa 30.0\text{ MPa} 30.0 MPa design specification?

If the project engineer wants no more than 1.0% of batches to fail specification, what minimum mean strength μ n e w \mu_{new} μ n e w ​ must the mixing plant achieve, assuming σ \sigma σ remains 4.0 MPa 4.0\text{ MPa} 4.0 MPa ?

Solution:

Part 1: Calculate P ( X < 30.0 MPa ) P(X < 30.0\text{ MPa}) P ( X < 30.0 MPa ) :

Compute the standardized Z Z Z -score: Z = X − μ σ = 30.0 − 35.0 4.0 = − 1.25 Z = \frac{X - \mu}{\sigma} = \frac{30.0 - 35.0}{4.0} = -1.25 Z = σ X − μ ​ = 4.0 30.0 − 35.0 ​ = − 1.25 Using standard normal table symmetry Φ ( − z ) = 1 − Φ ( z ) \Phi(-z) = 1 - \Phi(z) Φ ( − z ) = 1 − Φ ( z ) : Φ ( 1.25 ) = 0.8944 \Phi(1.25) = 0.8944 Φ ( 1.25 ) = 0.8944 P ( X < 30.0 ) = P ( Z < − 1.25 ) = 1 − 0.8944 = 0.1056 ( 10.56 % ) failure rate P(X < 30.0) = P(Z < -1.25) = 1 - 0.8944 = 0.1056 \quad (10.56\%)\text{ failure rate} P ( X < 30.0 ) = P ( Z < − 1.25 ) = 1 − 0.8944 = 0.1056 ( 10.56% ) failure rate

Part 2: Target failure rate is P ( X < 30.0 ) = 0.010 P(X < 30.0) = 0.010 P ( X < 30.0 ) = 0.010 .

From standard normal tables, P ( Z < z c r i t ) = 0.010 ⟹ z c r i t = − 2.326 P(Z < z_{crit}) = 0.010 \implies z_{crit} = -2.326 P ( Z < z cr i t ​ ) = 0.010 ⟹ z cr i t ​ = − 2.326 . Z = 30.0 − μ n e w σ = − 2.326 Z = \frac{30.0 - \mu_{new}}{\sigma} = -2.326 Z = σ 30.0 − μ n e w ​ ​ = − 2.326 30.0 − μ n e w = − 2.326 × 4.0 = − 9.304 30.0 - \mu_{new} = -2.326 \times 4.0 = -9.304 30.0 − μ n e w ​ = − 2.326 × 4.0 = − 9.304 μ n e w = 30.0 + 9.304 = 39.304 MPa ≈ 39.3 MPa \mu_{new} = 30.0 + 9.304 = 39.304\text{ MPa} \approx 39.3\text{ MPa} μ n e w ​ = 30.0 + 9.304 = 39.304 MPa ≈ 39.3 MPa

5. Summary Table of NCEES Probability Distributions

Distribution Type PMF / PDF f ( x ) f(x) f ( x ) Mean μ \mu μ Variance σ 2 \sigma^2 σ 2 Key Applications

Binomial Discrete ( n k ) p k ( 1 − p ) n − k \binom{n}{k} p^k (1-p)^{n-k} ( k n ​ ) p k ( 1 − p ) n − k n p n p n p n p ( 1 − p ) n p (1-p) n p ( 1 − p ) Batch sampling, defect inspection

Poisson Discrete λ x e − λ x ! \frac{\lambda^x e^{-\lambda}}{x!} x ! λ x e − λ ​ λ \lambda λ λ \lambda λ Flaw counts, call/arrival rates

Uniform Continuous 1 b − a \frac{1}{b-a} b − a 1 ​ a + b 2 \frac{a+b}{2} 2 a + b ​ ( b − a ) 2 12 \frac{(b-a)^2}{12} 12 ( b − a ) 2 ​ Tolerances, quantization noise

Normal Continuous 1 σ 2 π e − ( x − μ ) 2 2 σ 2 \frac{1}{\sigma\sqrt{2\pi}} e^{-\frac{(x-\mu)^2}{2\sigma^2}} σ 2 π ​ 1 ​ e − 2 σ 2 ( x − μ ) 2 ​ μ \mu μ σ 2 \sigma^2 σ 2 Material strengths, measurement noise

Exponential Continuous λ e − λ x \lambda e^{-\lambda x} λ e − λ x 1 λ \frac{1}{\lambda} λ 1 ​ 1 λ 2 \frac{1}{\lambda^2} λ 2 1 ​ Time-to-failure, MTBF, queueing