Study guide
6.4 Electrical Safety
FE Other Disciplines Fundamentals of Engineering
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Strategy
About the FE Other Disciplines Exam How to Use This Study Guide
2 Chapter 1: Mathematics
1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration
3 Chapter 2: Probability and Statistics
2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression
4 Chapter 3: Chemistry
3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics
5 Chapter 4: Instrumentation and Controls
4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic
6 Chapter 5: Engineering Ethics and Societal Impacts
5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety
7 Chapter 6: Safety, Health, and Environment
6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates
8 Chapter 7: Engineering Economics
7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees
9 Chapter 8: Statics
8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c
10 Chapter 9: Dynamics
9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping
11 Chapter 10: Strength of Materials
10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria
12 Chapter 11: Materials
11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design
13 Chapter 12: Fluid Mechanics
12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law
14 Chapter 13: Basic Electrical Engineering
13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter
15 Chapter 14: Thermodynamics and Heat Transfer
14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart
6.4 Electrical Safety
Key Takeaways Explain This Topic AI
NCEES lists electrical safety as its own sub-topic within Safety, Health, and Environment.
Current, not voltage, causes injury: about 1 mA is the perception threshold, 10-20 mA causes muscular let-go failure, and 100 mA can induce ventricular fibrillation.
A GFCI trips on a 4-6 mA imbalance between hot and neutral conductors, protecting people, while a circuit breaker protects conductors from overload and does not prevent electrocution.
Lockout/tagout under 29 CFR 1910.147 requires de-energizing, isolating, locking, tagging, and verifying zero energy before work begins.
Arc flash hazard is quantified as incident energy in cal/cm2, and NFPA 70E sets 1.2 cal/cm2 as the second-degree burn threshold.
Last updated: August 2026
6.4 Electrical Safety
NCEES lists electrical safety as a standalone sub-topic under Safety, Health, and Environment. It is tested from the hazard side rather than the circuit-analysis side — what current does to a person, which protective device addresses which hazard, and what procedure must precede work. The circuit mathematics themselves come from the Basic Electrical Engineering chapter.
Current, Not Voltage, Injures People
Voltage drives the current, but the physiological effect is a function of current magnitude, path, and duration . The canonical thresholds for 60 Hz AC through the body:
- Current (60 Hz AC) Physiological effect
- 1 mA Perception threshold — faint tingle
- 5 mA Slight shock; not painful but startling, and startle reactions cause secondary injuries
- 10–20 mA "Let-go" threshold — sustained muscular contraction prevents releasing the conductor
- 30–50 mA Respiratory muscle paralysis; asphyxiation if prolonged
- 100 mA – 200 mA Ventricular fibrillation — the usual mechanism of electrocution death
- > 200 mA Severe burns, cardiac arrest; paradoxically the heart may not fibrillate because it is clamped
The counterintuitive part: the most lethal band is roughly 100–200 mA, not the highest currents. Above about 200 mA the heart is held in sustained contraction and often resumes a normal rhythm when the current stops, whereas fibrillation is self-sustaining. This is why a "small" fault current of a tenth of an amp is deadly while a large fault may throw the victim clear.
DC and higher frequencies require larger currents for the same effect; the values above are for 60 Hz, which is close to the worst case for fibrillation.
Applying Ohm's Law to the Human Body I = V R body + R contact I = \frac{V}{R_{\text{body}} + R_{\text{contact}}} I = R body + R contact V
- Condition Approximate resistance
- Dry skin, hand-to-hand 10{,}000 – 100{,}000 Ω
- Sweaty or wet skin 1{,}000 – 5{,}000 Ω
- Internal body resistance alone (skin broken/bypassed) ~300 – 500 Ω
Worked example. A worker contacts a 120 V circuit hand-to-foot.
Dry conditions , R = 50,000 Ω R = 50{,}000\ \Omega R = 50 , 000 Ω : I = 120 50,000 = 0.0024 A = 2.4 mA I = \frac{120}{50{,}000} = 0.0024\ \text{A} = 2.4\ \text{mA} I = 50 , 000 120 = 0.0024 A = 2.4 mA
Perceptible, startling, survivable.
Wet conditions , R = 1,500 Ω R = 1{,}500\ \Omega R = 1 , 500 Ω : I = 120 1,500 = 0.080 A = 80 mA I = \frac{120}{1{,}500} = 0.080\ \text{A} = 80\ \text{mA} I = 1 , 500 120 = 0.080 A = 80 mA
Approaching the fibrillation range on the same 120 V circuit. Resistance dropped by a factor of 33 and the current rose by the same factor. This is the entire reason GFCI protection is mandated in wet locations, and why "it's only 120 volts" is a fatal misconception.
Protective Devices: Matching Device to Hazard
Device Protects Trip criterion Prevents electrocution?
Fuse / circuit breaker Conductors and equipment from overload and short circuit 15 A, 20 A, etc. — sized to the wire No. 100 mA through a person is invisible to a 20 A breaker
GFCI (ground-fault circuit interrupter) People 4–6 mA imbalance between hot and neutral, in ~25 ms Yes — this is its purpose
AFCI (arc-fault circuit interrupter) Property from fire Arc signature detection No
Equipment grounding conductor People and equipment Provides a low-impedance fault path so overcurrent devices clear the fault Indirectly
The key insight the exam tests: a 20 A breaker and a GFCI are not alternatives — they address unrelated hazards. A 20 A breaker allows 20{,}000 mA before tripping, roughly 200 times the fibrillation threshold. Only the GFCI's 4–6 mA setting, chosen to sit below the 10–20 mA let-go threshold, protects a person.
Grounding vs. bonding , routinely confused:
Grounding connects the system to earth, establishing a reference and providing a path for lightning and line surges.
Bonding connects all non-current-carrying metal parts to each other , eliminating the voltage differences between them that would otherwise drive current through anyone touching two surfaces at once.
Lockout/Tagout (29 CFR 1910.147)
The OSHA standard for the control of hazardous energy is procedural, and the exam tests the sequence and the verification step.
Prepare — identify every energy source: electrical, hydraulic, pneumatic, mechanical (springs, suspended loads), thermal, chemical, gravitational.
Notify affected employees.
Shut down the equipment using its normal stopping procedure.
Isolate each energy source — open the disconnect, close and blank the valve, block the mechanism.
Lock and tag each isolating device. Each authorized worker applies their own lock; a group lockbox is used for multi-worker jobs.
Release stored energy — bleed accumulators, discharge capacitors, relieve springs, lower or block suspended parts, allow thermal cool-down.
Verify zero energy — attempt to start the equipment, and test with a meter at the point of work.
Verification is the step candidates omit, and the step that kills. A locked disconnect proves only that a handle moved. Mislabeled panels, back-feed from an alternate supply, a standby generator, capacitor charge, or a failed disconnect contact can all leave the conductors live. The rule is test before touch , and test the meter on a known live source before and after, so a dead meter is not mistaken for a dead circuit.
Two further rules:
Only the worker who applied a lock may remove it. This is what makes lockout a personal guarantee rather than an administrative note.
A tag alone is a warning, not an isolation. Tagout-only is permitted only where the device cannot accept a lock, and then it requires additional safeguards.
Arc Flash and NFPA 70E
An arc flash is an explosive release of energy from a fault arcing through air. It is a distinct hazard from shock: the injury mechanism is radiant heat, molten metal spray, and the pressure wave of the arc blast , with arc temperatures reaching roughly 35{,}000 °F — several times the surface of the sun.
The governing quantity is incident energy , the thermal energy delivered per unit area at the working distance: E [ cal/cm 2 ] E \ \left[\text{cal/cm}^2\right] E [ cal/cm 2 ]
- Incident energy Consequence
- 1.2 cal/cm² Onset of a second-degree burn on bare skin — the NFPA 70E benchmark
- 8 cal/cm² Third-degree burns likely without protection
- 40 cal/cm² Potentially fatal; blast pressure becomes a major hazard
Incident energy rises with available fault current and, critically, in direct proportion to arc duration : E ∝ I arc ⋅ t arc E \propto I_{\text{arc}} \cdot t_{\text{arc}} E ∝ I arc ⋅ t arc
This is the single most useful design lever. Halving the protective device's clearing time halves the incident energy. A relay setting change or an arc-energy-reduction maintenance switch can move a task from requiring the heaviest arc-rated suit to a much lower category without changing a single conductor.
Approach Boundaries
- Boundary Defined by Purpose
- Limited approach Shock hazard No unqualified person inside without an escort
- Restricted approach Shock hazard Qualified persons only, with insulated PPE and a work plan
- Arc flash boundary Where incident energy = 1.2 cal/cm² Arc-rated PPE required inside
PPE is selected so its arc rating (in cal/cm², measured as ATPV — arc thermal performance value) equals or exceeds the calculated incident energy at the working distance. Note the material rule that follows: arc-rated clothing must not be worn over meltable synthetics such as polyester or nylon, which melt into the skin.
The governing principle of NFPA 70E: establish an electrically safe work condition — de-energize, lock out, and verify. PPE is what protects the worker during the tasks that cannot be performed de-energized (such as the voltage verification itself), not a substitute for de-energizing. An exam option offering "wear appropriate PPE and work it live" is wrong whenever de-energizing is feasible.