Study guide

8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration

FE Other Disciplines Fundamentals of Engineering

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Strategy

About the FE Other Disciplines Exam How to Use This Study Guide

2 Chapter 1: Mathematics

1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration

3 Chapter 2: Probability and Statistics

2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression

4 Chapter 3: Chemistry

3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics

5 Chapter 4: Instrumentation and Controls

4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic

6 Chapter 5: Engineering Ethics and Societal Impacts

5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety

7 Chapter 6: Safety, Health, and Environment

6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates

8 Chapter 7: Engineering Economics

7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees

9 Chapter 8: Statics

8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c

10 Chapter 9: Dynamics

9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping

11 Chapter 10: Strength of Materials

10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria

12 Chapter 11: Materials

11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design

13 Chapter 12: Fluid Mechanics

12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law

14 Chapter 13: Basic Electrical Engineering

13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter

15 Chapter 14: Thermodynamics and Heat Transfer

14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart

8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration

Key Takeaways Explain This Topic AI

NCEES lists area properties explicitly, naming centroids, moments of inertia, radius of gyration, and the parallel axis theorem.

The composite centroid is the area-weighted average of the part centroids, and a hole is handled as a negative area.

The parallel axis theorem transfers a moment of inertia to a parallel axis by adding A times d squared, and the transfer term is always positive when moving away from the centroid.

For a rectangle about its own centroidal axis I = bh^3/12, and about its base I = bh^3/3.

Radius of gyration r = sqrt(I/A) has units of length and feeds directly into the column slenderness ratio used for Euler buckling.

Last updated: August 2026

8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration

NCEES lists this sub-topic as "Area properties (e.g., centroids, moments of inertia, radius of gyration, parallel axis theorem)." It earns study time far beyond its share of the Statics questions, because these quantities are inputs to most of the Strength of Materials area : bending stress needs I I I , torsion needs J J J , transverse shear needs Q Q Q and I I I , beam deflection needs E I EI E I , and Euler buckling needs r r r . An error in I I I propagates into a third of the exam.

Composite Centroids x ˉ = ∑ A i x ˉ i ∑ A i , y ˉ = ∑ A i y ˉ i ∑ A i \bar{x} = \frac{\sum A_i \bar{x}_i}{\sum A_i}, \qquad \bar{y} = \frac{\sum A_i \bar{y}_i}{\sum A_i} x ˉ = ∑ A i ​ ∑ A i ​ x ˉ i ​ ​ , y ˉ ​ = ∑ A i ​ ∑ A i ​ y ˉ ​ i ​ ​

The centroid is the area-weighted average of the part centroids. Two procedural rules make composite problems reliable:

A hole is a negative area. Subtract both its area and its first moment A i y ˉ i A_i\bar{y}_i A i ​ y ˉ ​ i ​ .

An axis of symmetry contains the centroid. With two axes of symmetry, the centroid is at their intersection and no calculation is needed. Always look for this first.

  • Shape A A A Centroid location
  • Rectangle b × h b \times h b × h b h bh bh h / 2 h/2 h /2 from base
  • Triangle base b b b , height h h h b h / 2 bh/2 bh /2 h / 3 h/3 h /3 from base

Semicircle radius R R R π R 2 / 2 \pi R^2/2 π R 2 /2 4 R / ( 3 π ) ≈ 0.424 R 4R/(3\pi) \approx 0.424R 4 R / ( 3 π ) ≈ 0.424 R from the diameter

Quarter circle radius R R R π R 2 / 4 \pi R^2/4 π R 2 /4 4 R / ( 3 π ) 4R/(3\pi) 4 R / ( 3 π ) from each straight edge

Parabolic spandrel (area under y = k x 2 y=kx^2 y = k x 2 ) b h / 3 bh/3 bh /3 3 b / 4 3b/4 3 b /4 from the vertex

  • Centroids and Area Moments of Inertia
  • Composite Area Centroids

The centroid ( x ˉ , y ˉ ) (\bar{x}, \bar{y}) ( x ˉ , y ˉ ​ ) of a composite area composed of simple geometric shapes (rectangles, triangles, circles) is calculated using area-weighted averages: x ˉ = ∑ x ˉ i A i ∑ A i , y ˉ = ∑ y ˉ i A i ∑ A i \bar{x} = \frac{\sum \bar{x}_i A_i}{\sum A_i}, \quad \bar{y} = \frac{\sum \bar{y}_i A_i}{\sum A_i} x ˉ = ∑ A i ​ ∑ x ˉ i ​ A i ​ ​ , y ˉ ​ = ∑ A i ​ ∑ y ˉ ​ i ​ A i ​ ​

where x ˉ i \bar{x}_i x ˉ i ​ and y ˉ i \bar{y}_i y ˉ ​ i ​ represent the centroid coordinates of each individual segment A i A_i A i ​ .

Area Moments of Inertia and Parallel Axis Theorem

The second moment of area (moment of inertia) measures a cross section's resistance to flexural bending: I x = ∫ y 2 d A , I y = ∫ x 2 d A I_x = \int y^2 dA, \quad I_y = \int x^2 dA I x ​ = ∫ y 2 d A , I y ​ = ∫ x 2 d A

The Parallel Axis Theorem transfers centroidal moments of inertia I c x I_{cx} I c x ​ to any parallel reference axis separated by perpendicular offset distance d y d_y d y ​ : I x = I c x + A d y 2 , I y = I c y + A d x 2 I_x = I_{cx} + A d_y^2, \quad I_y = I_{cy} + A d_x^2 I x ​ = I c x ​ + A d y 2 ​ , I y ​ = I cy ​ + A d x 2 ​

Shape Area ( A A A ) Centroidal I c x I_{cx} I c x ​ Centroidal I c y I_{cy} I cy ​

Rectangle ( b × h b \times h b × h ) b h b h bh 1 12 b h 3 \frac{1}{12} b h^3 12 1 ​ b h 3 1 12 h b 3 \frac{1}{12} h b^3 12 1 ​ h b 3

Triangle (base b b b , height h h h ) 1 2 b h \frac{1}{2} b h 2 1 ​ bh 1 36 b h 3 \frac{1}{36} b h^3 36 1 ​ b h 3 1 36 h b 3 \frac{1}{36} h b^3 36 1 ​ h b 3

Circle (radius r r r ) π r 2 \pi r^2 π r 2 π 4 r 4 \frac{\pi}{4} r^4 4 π ​ r 4 π 4 r 4 \frac{\pi}{4} r^4 4 π ​ r 4

Radius of Gyration and Polar Moment of Inertia

The radius of gyration k k k represents the distance from an axis where the entire cross-sectional area could be concentrated without altering its moment of inertia: k x = I x A , k y = I y A k_x = \sqrt{\frac{I_x}{A}}, \quad k_y = \sqrt{\frac{I_y}{A}} k x ​ = A I x ​ ​ ​ , k y ​ = A I y ​ ​ ​

The polar area moment of inertia J O J_O J O ​ about an axis perpendicular to the plane at origin O O O is: J O = I x + I y J_O = I_x + I_y J O ​ = I x ​ + I y ​

For a solid circular section of radius r r r (or diameter d d d ), J O = π r 4 2 = π d 4 32 J_O = \frac{\pi r^4}{2} = \frac{\pi d^4}{32} J O ​ = 2 π r 4 ​ = 32 π d 4 ​ .

Standard Moments of Inertia and the Transfer Rule

Shape About centroidal axis About base / edge

Rectangle b b b wide, h h h tall I x = b h 3 12 I_x = \dfrac{bh^3}{12} I x ​ = 12 b h 3 ​ I base = b h 3 3 I_{\text{base}} = \dfrac{bh^3}{3} I base ​ = 3 b h 3 ​

Triangle base b b b , height h h h I x = b h 3 36 I_x = \dfrac{bh^3}{36} I x ​ = 36 b h 3 ​ I base = b h 3 12 I_{\text{base}} = \dfrac{bh^3}{12} I base ​ = 12 b h 3 ​

Circle radius R R R I x = π R 4 4 = π D 4 64 I_x = \dfrac{\pi R^4}{4} = \dfrac{\pi D^4}{64} I x ​ = 4 π R 4 ​ = 64 π D 4 ​ —

Hollow circle R o , R i R_o, R_i R o ​ , R i ​ I x = π 4 ( R o 4 − R i 4 ) I_x = \dfrac{\pi}{4}(R_o^4 - R_i^4) I x ​ = 4 π ​ ( R o 4 ​ − R i 4 ​ ) —

Semicircle radius R R R I x ≈ 0.1098 R 4 I_x \approx 0.1098R^4 I x ​ ≈ 0.1098 R 4 I diameter = π R 4 8 I_{\text{diameter}} = \dfrac{\pi R^4}{8} I diameter ​ = 8 π R 4 ​

Verify the rectangle transfer once, and you will trust it forever. Starting from the centroidal value and moving a distance h / 2 h/2 h /2 to the base: I base = b h 3 12 + ( b h ) ( h 2 ) 2 = b h 3 12 + b h 3 4 = b h 3 3 I_{\text{base}} = \frac{bh^3}{12} + (bh)\left(\frac{h}{2}\right)^2 = \frac{bh^3}{12} + \frac{bh^3}{4} = \frac{bh^3}{3} I base ​ = 12 b h 3 ​ + ( bh ) ( 2 h ​ ) 2 = 12 b h 3 ​ + 4 b h 3 ​ = 3 b h 3 ​ ✓ — exactly the tabulated base value.

The Cubic Sensitivity of I I I

Because I ∝ h 3 I \propto h^3 I ∝ h 3 for a rectangle, depth dominates . Doubling the depth multiplies I I I by 8; doubling the width only doubles it. This is why joists are installed on edge rather than flat: a 50 × 200 50 \times 200 50 × 200 mm section has I on edge = 50 ( 200 ) 3 12 = 33.3 × 10 6 mm 4 , I flat = 200 ( 50 ) 3 12 = 2.08 × 10 6 mm 4 I_{\text{on edge}} = \frac{50(200)^3}{12} = 33.3 \times 10^6\ \text{mm}^4, \qquad I_{\text{flat}} = \frac{200(50)^3}{12} = 2.08 \times 10^6\ \text{mm}^4 I on edge ​ = 12 50 ( 200 ) 3 ​ = 33.3 × 1 0 6 mm 4 , I flat ​ = 12 200 ( 50 ) 3 ​ = 2.08 × 1 0 6 mm 4

a factor of 16 from the same piece of lumber, at zero material cost.

Polar Moment of Inertia J = I x + I y J = I_x + I_y J = I x ​ + I y ​

For a solid circle, symmetry gives I x = I y = π R 4 / 4 I_x = I_y = \pi R^4/4 I x ​ = I y ​ = π R 4 /4 , so: J = π R 4 2 = π D 4 32 J = \frac{\pi R^4}{2} = \frac{\pi D^4}{32} J = 2 π R 4 ​ = 32 π D 4 ​

J J J governs torsion of circular shafts, so this value reappears throughout the Strength of Materials chapter. For a hollow shaft, J = π 2 ( R o 4 − R i 4 ) J = \frac{\pi}{2}(R_o^4 - R_i^4) J = 2 π ​ ( R o 4 ​ − R i 4 ​ ) .

Radius of Gyration r = I A r = \sqrt{\frac{I}{A}} r = A I ​ ​

Radius of gyration has units of length : it is the distance from the axis at which the entire area could be concentrated without changing I I I . It compresses shape efficiency into one number, and its purpose on this exam is the slenderness ratio for column buckling: slenderness = K L r \text{slenderness} = \frac{KL}{r} slenderness = r K L ​

A column buckles about the axis with the smallest r r r , so for a non-symmetric section you must compute r r r about both principal axes and use the minimum. This links directly to the Euler buckling section in Chapter 10.

Worked Example: Composite Section with a Cutout

A 120 mm wide × 200 mm tall rectangle has a 60 mm diameter circular hole centered 60 mm above the base. Find y ˉ \bar{y} y ˉ ​ and I x ˉ I_{\bar{x}} I x ˉ ​ about the horizontal centroidal axis.

Areas: A 1 = 120 ( 200 ) = 24,000 mm 2 at y ˉ 1 = 100 mm A_1 = 120(200) = 24{,}000\ \text{mm}^2 \text{ at } \bar{y}_1 = 100\ \text{mm} A 1 ​ = 120 ( 200 ) = 24 , 000 mm 2 at y ˉ ​ 1 ​ = 100 mm A 2 = − π ( 60 ) 2 4 = − 2,827 mm 2 at y ˉ 2 = 60 mm (negative area) A_2 = -\frac{\pi(60)^2}{4} = -2{,}827\ \text{mm}^2 \text{ at } \bar{y}_2 = 60\ \text{mm (negative area)} A 2 ​ = − 4 π ( 60 ) 2 ​ = − 2 , 827 mm 2 at y ˉ ​ 2 ​ = 60 mm (negative area) A net = 24,000 − 2,827 = 21,173 mm 2 A_{\text{net}} = 24{,}000 - 2{,}827 = 21{,}173\ \text{mm}^2 A net ​ = 24 , 000 − 2 , 827 = 21 , 173 mm 2

Centroid: y ˉ = 24,000 ( 100 ) − 2,827 ( 60 ) 21,173 = 2,400,000 − 169,620 21,173 = 2,230,380 21,173 = 105.3 mm \bar{y} = \frac{24{,}000(100) - 2{,}827(60)}{21{,}173} = \frac{2{,}400{,}000 - 169{,}620}{21{,}173} = \frac{2{,}230{,}380}{21{,}173} = 105.3\ \text{mm} y ˉ ​ = 21 , 173 24 , 000 ( 100 ) − 2 , 827 ( 60 ) ​ = 21 , 173 2 , 400 , 000 − 169 , 620 ​ = 21 , 173 2 , 230 , 380 ​ = 105.3 mm

The centroid moved up from 100 mm, because removing material low in the section shifts the balance point upward. That direction check catches sign errors immediately.

Moment of inertia , transferring each part to y ˉ = 105.3 \bar{y} = 105.3 y ˉ ​ = 105.3 mm:

Rectangle , d 1 = 105.3 − 100 = 5.3 d_1 = 105.3 - 100 = 5.3 d 1 ​ = 105.3 − 100 = 5.3 mm: I 1 = 120 ( 200 ) 3 12 + 24,000 ( 5.3 ) 2 = 80.0 × 10 6 + 0.674 × 10 6 = 80.67 × 10 6 mm 4 I_1 = \frac{120(200)^3}{12} + 24{,}000(5.3)^2 = 80.0\times10^6 + 0.674\times10^6 = 80.67\times10^6\ \text{mm}^4 I 1 ​ = 12 120 ( 200 ) 3 ​ + 24 , 000 ( 5.3 ) 2 = 80.0 × 1 0 6 + 0.674 × 1 0 6 = 80.67 × 1 0 6 mm 4

Hole , d 2 = 105.3 − 60 = 45.3 d_2 = 105.3 - 60 = 45.3 d 2 ​ = 105.3 − 60 = 45.3 mm, subtracted: I 2 = π ( 30 ) 4 4 + 2,827 ( 45.3 ) 2 = 0.636 × 10 6 + 5.801 × 10 6 = 6.44 × 10 6 mm 4 I_2 = \frac{\pi(30)^4}{4} + 2{,}827(45.3)^2 = 0.636\times10^6 + 5.801\times10^6 = 6.44\times10^6\ \text{mm}^4 I 2 ​ = 4 π ( 30 ) 4 ​ + 2 , 827 ( 45.3 ) 2 = 0.636 × 1 0 6 + 5.801 × 1 0 6 = 6.44 × 1 0 6 mm 4 I x ˉ = 80.67 × 10 6 − 6.44 × 10 6 = 74.2 × 10 6 mm 4 I_{\bar{x}} = 80.67\times10^6 - 6.44\times10^6 = \boxed{74.2\times10^6\ \text{mm}^4} I x ˉ ​ = 80.67 × 1 0 6 − 6.44 × 1 0 6 = 74.2 × 1 0 6 mm 4 ​

Radius of gyration: r = 74.2 × 10 6 21,173 = 3,504 = 59.2 mm r = \sqrt{\frac{74.2\times10^6}{21{,}173}} = \sqrt{3{,}504} = 59.2\ \text{mm} r = 21 , 173 74.2 × 1 0 6 ​ ​ = 3 , 504 ​ = 59.2 mm

Trap: the hole's transfer term A d 2 = 5.80 × 10 6 A d^2 = 5.80\times10^6 A d 2 = 5.80 × 1 0 6 is nine times its own centroidal I I I of 0.636 × 10 6 0.636\times10^6 0.636 × 1 0 6 . Candidates who subtract only π R 4 / 4 \pi R^4/4 π R 4 /4 and skip the transfer overestimate I I I by about 8%, and the error grows the farther the hole sits from the centroid.