Study guide

8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems

FE Other Disciplines Fundamentals of Engineering

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Strategy

About the FE Other Disciplines Exam How to Use This Study Guide

2 Chapter 1: Mathematics

1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration

3 Chapter 2: Probability and Statistics

2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression

4 Chapter 3: Chemistry

3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics

5 Chapter 4: Instrumentation and Controls

4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic

6 Chapter 5: Engineering Ethics and Societal Impacts

5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety

7 Chapter 6: Safety, Health, and Environment

6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates

8 Chapter 7: Engineering Economics

7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees

9 Chapter 8: Statics

8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c

10 Chapter 9: Dynamics

9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping

11 Chapter 10: Strength of Materials

10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria

12 Chapter 11: Materials

11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design

13 Chapter 12: Fluid Mechanics

12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law

14 Chapter 13: Basic Electrical Engineering

13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter

15 Chapter 14: Thermodynamics and Heat Transfer

14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart

8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems

Key Takeaways Explain This Topic AI

A distributed load is replaced by a resultant equal to the area under the load curve, acting through the centroid of that area.

A uniform load w over length L gives a resultant wL at midspan; a triangular load with peak w gives wL/2 at one-third of the length from the larger end.

A couple is a pure moment: it has the same value about every point and produces no net force.

Any force system reduces to a single resultant force plus a couple, and moving a force off its line of action requires adding a compensating couple.

A resultant force placed at the correct location produces the same external moment as the original system about every point, which is the check that validates the reduction.

Last updated: August 2026

8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems

The NCEES Statics specification lists "Force systems (e.g., resultants, concurrent, distributed)" and "Force couple systems" as separate sub-topics. Distributed loading is the one most likely to appear as a setup step inside a larger problem: before you can write equilibrium equations for a loaded beam, you must convert the load diagram into a resultant force at the right place. Get the location wrong and every downstream reaction, shear, and moment is wrong.

The Two Rules for Any Distributed Load

For a line load w ( x ) w(x) w ( x ) in force per unit length: R = ∫ 0 L w ( x ) d x (the resultant equals the area under the load curve) R = \int_0^L w(x)\,dx \qquad\text{(the resultant equals the \textit{area} under the load curve)} R = ∫ 0 L ​ w ( x ) d x (the resultant equals the area under the load curve) x ˉ = ∫ 0 L x w ( x ) d x ∫ 0 L w ( x ) d x (it acts through the centroid of that area) \bar{x} = \frac{\int_0^L x\,w(x)\,dx}{\int_0^L w(x)\,dx} \qquad\text{(it acts through the \textit{centroid} of that area)} x ˉ = ∫ 0 L ​ w ( x ) d x ∫ 0 L ​ x w ( x ) d x ​ (it acts through the centroid of that area)

In practice you almost never integrate — you recognize the shape:

  • Load shape Resultant magnitude Location of resultant
  • Uniform , intensity w w w over length L L L R = w L R = wL R = w L Midspan, L / 2 L/2 L /2

Triangular , zero to peak w w w over L L L R = 1 2 w L R = \tfrac{1}{2}wL R = 2 1 ​ w L L / 3 L/3 L /3 from the peak end, 2 L / 3 2L/3 2 L /3 from the zero end

Trapezoidal , w 1 w_1 w 1 ​ to w 2 w_2 w 2 ​ Split into a rectangle w 1 L w_1L w 1 ​ L + a triangle 1 2 ( w 2 − w 1 ) L \tfrac{1}{2}(w_2-w_1)L 2 1 ​ ( w 2 ​ − w 1 ​ ) L Treat each piece separately

Parabolic , zero to peak w w w (2nd degree) R = 1 3 w L R = \tfrac{1}{3}wL R = 3 1 ​ w L L / 4 L/4 L /4 from the peak end

The triangular-load trap. The resultant of a triangular load acts at the one-third point measured from the larger (peak) end — that is, at the centroid of the triangle, which is nearer the heavier loading. Candidates who place it at L / 3 L/3 L /3 from the zero end have it on the wrong side and typically get reactions swapped between the two supports. Sanity check: the resultant must always lie toward the heavier end.

Worked Example: Trapezoidal Load on a Simply Supported Beam

A beam spans L = 6.0 m L = 6.0\ \text{m} L = 6.0 m between pin support A A A (left) and roller B B B (right). The load varies linearly from w A = 4.0 kN/m w_A = 4.0\ \text{kN/m} w A ​ = 4.0 kN/m at A A A to w B = 10.0 kN/m w_B = 10.0\ \text{kN/m} w B ​ = 10.0 kN/m at B B B . Find the reactions.

Decompose into a rectangle plus a triangle:

Rectangle — uniform 4.0 kN/m over 6.0 m: R 1 = ( 4.0 ) ( 6.0 ) = 24.0 kN at x ˉ 1 = 3.00 m from A R_1 = (4.0)(6.0) = 24.0\ \text{kN at } \bar{x}_1 = 3.00\ \text{m from } A R 1 ​ = ( 4.0 ) ( 6.0 ) = 24.0 kN at x ˉ 1 ​ = 3.00 m from A

Triangle — zero at A A A rising to 10.0 − 4.0 = 6.0 kN/m 10.0 - 4.0 = 6.0\ \text{kN/m} 10.0 − 4.0 = 6.0 kN/m at B B B : R 2 = 1 2 ( 6.0 ) ( 6.0 ) = 18.0 kN at x ˉ 2 = 2 3 ( 6.0 ) = 4.00 m from A R_2 = \tfrac{1}{2}(6.0)(6.0) = 18.0\ \text{kN at } \bar{x}_2 = \tfrac{2}{3}(6.0) = 4.00\ \text{m from } A R 2 ​ = 2 1 ​ ( 6.0 ) ( 6.0 ) = 18.0 kN at x ˉ 2 ​ = 3 2 ​ ( 6.0 ) = 4.00 m from A

(The peak is at B B B , so the centroid is L / 3 = 2.0 L/3 = 2.0 L /3 = 2.0 m from B B B , i.e. 4.0 m from A A A .)

Total load check: R = 24.0 + 18.0 = 42.0 kN R = 24.0 + 18.0 = 42.0\ \text{kN} R = 24.0 + 18.0 = 42.0 kN . Verify with the trapezoid area formula: 1 2 ( 4.0 + 10.0 ) ( 6.0 ) = 42.0 kN \tfrac{1}{2}(4.0+10.0)(6.0) = 42.0\ \text{kN} 2 1 ​ ( 4.0 + 10.0 ) ( 6.0 ) = 42.0 kN ✓

Sum moments about A A A : ∑ M A = 0 : B y ( 6.0 ) − 24.0 ( 3.00 ) − 18.0 ( 4.00 ) = 0 \sum M_A = 0: \quad B_y(6.0) - 24.0(3.00) - 18.0(4.00) = 0 ∑ M A ​ = 0 : B y ​ ( 6.0 ) − 24.0 ( 3.00 ) − 18.0 ( 4.00 ) = 0 6.0 B y = 72.0 + 72.0 = 144.0 ⇒ B y = 24.0 kN 6.0\,B_y = 72.0 + 72.0 = 144.0 \;\Rightarrow\; B_y = 24.0\ \text{kN} 6.0 B y ​ = 72.0 + 72.0 = 144.0 ⇒ B y ​ = 24.0 kN

Sum vertical forces: A y = 42.0 − 24.0 = 18.0 kN A_y = 42.0 - 24.0 = 18.0\ \text{kN} A y ​ = 42.0 − 24.0 = 18.0 kN

The heavier end carries more, as it must. Cross-check by locating the single resultant of the whole trapezoid: x ˉ = 24.0 ( 3.00 ) + 18.0 ( 4.00 ) 42.0 = 144.0 42.0 = 3.43 m from A \bar{x} = \frac{24.0(3.00) + 18.0(4.00)}{42.0} = \frac{144.0}{42.0} = 3.43\ \text{m from } A x ˉ = 42.0 24.0 ( 3.00 ) + 18.0 ( 4.00 ) ​ = 42.0 144.0 ​ = 3.43 m from A

Then B y = 42.0 ( 3.43 ) / 6.0 = 24.0 kN B_y = 42.0(3.43)/6.0 = 24.0\ \text{kN} B y ​ = 42.0 ( 3.43 ) /6.0 = 24.0 kN ✓ — the same answer from a single equivalent force, which is the whole point of the reduction.

Couples: Pure Moments

A couple is two equal, opposite, non-collinear forces separated by perpendicular distance d d d : M = F d M = F\,d M = F d

Two properties make couples behave differently from forces, and both are tested:

A couple produces zero net force. ∑ F = F − F = 0 \sum F = F - F = 0 ∑ F = F − F = 0 , so a couple cannot translate a body — only rotate it.

A couple's moment is the same about every point. It is a free vector . Unlike a force's moment, which changes as you move the reference point, a couple contributes the same value to ∑ M \sum M ∑ M no matter where you take moments.

Consequence for exam work: when summing moments about a point, a couple applied anywhere on the body enters the equation at full value, and its position is irrelevant. Candidates who try to compute a moment arm for an applied couple are looking for information the problem never gives.

Equivalent Force-Couple Systems

Any force system, however complicated, reduces to one resultant force plus one couple at a chosen point O O O : R ⃗ = ∑ F ⃗ i , M ⃗ O = ∑ M ⃗ i + ∑ ( r ⃗ i × F ⃗ i ) \vec{R} = \sum \vec{F}_i, \qquad \vec{M}_O = \sum \vec{M}_i + \sum (\vec{r}_i \times \vec{F}_i) R = ∑ F i ​ , M O ​ = ∑ M i ​ + ∑ ( r i ​ × F i ​ )

The rule for moving a force : sliding a force off its line of action to a new point requires adding a couple equal to the moment the force produced about that new point. Otherwise the external effect changes. Force F at distance d from O ≡ Force F at O + couple M = F d \text{Force } F \text{ at distance } d \text{ from } O \;\;\equiv\;\; \text{Force } F \text{ at } O \;+\; \text{couple } M = Fd Force F at distance d from O ≡ Force F at O + couple M = F d

Special Cases

  • System type Reduces to
  • Concurrent forces (all lines of action meet at a point) A single resultant force through that point; no couple
  • Coplanar forces A single resultant force, or a single couple if R ⃗ = 0 \vec{R} = 0 R = 0
  • Parallel forces A single resultant at the centroid of the force distribution
  • General 3-D A resultant force plus a couple (a "wrench")
  • Worked Example: Reducing a System to a Single Force

A bracket carries a downward 300 N force at x = 0.20 x = 0.20 x = 0.20 m from point O O O , an upward 100 N force at x = 0.50 x = 0.50 x = 0.50 m, and an applied 40 N·m counterclockwise couple. Reduce this to a force-couple system at O O O , then find where a single equivalent force would act.

Resultant force (down positive): R = 300 − 100 = 200 N downward R = 300 - 100 = 200\ \text{N downward} R = 300 − 100 = 200 N downward

Resultant couple about O O O (counterclockwise positive; a downward force at + x +x + x produces a clockwise moment): M O = − 300 ( 0.20 ) + 100 ( 0.50 ) + 40 = − 60 + 50 + 40 = + 30 N ⋅ m (counterclockwise) M_O = -300(0.20) + 100(0.50) + 40 = -60 + 50 + 40 = +30\ \text{N}\cdot\text{m (counterclockwise)} M O ​ = − 300 ( 0.20 ) + 100 ( 0.50 ) + 40 = − 60 + 50 + 40 = + 30 N ⋅ m (counterclockwise)

So at O O O : a 200 N downward force plus a 30 N·m counterclockwise couple.

Single equivalent force. Place the 200 N downward force at the distance d d d that produces + 30 +30 + 30 N·m about O O O on its own. A downward force must sit at negative x x x to give a counterclockwise moment: 200 d = 30 ⇒ d = 0.15 m , located 0.15 m on the − x side of O 200\,d = 30 \;\Rightarrow\; d = 0.15\ \text{m}, \text{ located } 0.15\ \text{m on the } -x \text{ side of } O 200 d = 30 ⇒ d = 0.15 m , located 0.15 m on the − x side of O

Verification — take moments about a test point 1.0 m to the + x +x + x side of O O O .

Original system: − 300 ( 1.0 − 0.20 ) + 100 ( 1.0 − 0.50 ) + 40 -300(1.0-0.20) + 100(1.0-0.50) + 40 − 300 ( 1.0 − 0.20 ) + 100 ( 1.0 − 0.50 ) + 40 , with a downward force left of the test point giving a counterclockwise (positive) moment about it: + 300 ( 0.80 ) − 100 ( 0.50 ) + 40 = 240 − 50 + 40 = + 230 +300(0.80) - 100(0.50) + 40 = 240 - 50 + 40 = +230 + 300 ( 0.80 ) − 100 ( 0.50 ) + 40 = 240 − 50 + 40 = + 230 N·m.

Reduced system: the 200 N downward force sits 1.0 + 0.15 = 1.15 1.0 + 0.15 = 1.15 1.0 + 0.15 = 1.15 m to the left of the test point: + 200 ( 1.15 ) = + 230 +200(1.15) = +230 + 200 ( 1.15 ) = + 230 N·m ✓

Equal about an arbitrary point, so the reduction is valid. That check — same resultant, same moment about any point — is the definition of statical equivalence.