Study guide

8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction

FE Other Disciplines Fundamentals of Engineering

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Strategy

About the FE Other Disciplines Exam How to Use This Study Guide

2 Chapter 1: Mathematics

1.1 Analytic Geometry, Trigonometry, and Vector Operations 1.2 Differential and Integral Calculus 1.3 Ordinary Differential Equations and Laplace Transforms 1.4 Linear Algebra, Matrices, and Systems of Equations 1.5 Numerical Methods, Root-Finding, and Numerical Integration

3 Chapter 2: Probability and Statistics

2.1 Probability Distributions, PMFs, and PDFs 2.2 Expected Value, Mean, Variance, and Descriptive Statistics 2.3 Estimation, Confidence Intervals, and Sample Sizes 2.4 Hypothesis Testing, Goodness of Fit, and Linear Regression

4 Chapter 3: Chemistry

3.1 Stoichiometry, Chemical Reactions, and Solutions 3.2 Chemical Equilibrium, Acids/Bases, and Ideal Gas Laws 3.3 Oxidation-Reduction, Electrochemistry, and Corrosion Basics

5 Chapter 4: Instrumentation and Controls

4.1 Sensors, Transducers, and Signal Conditioning 4.2 Data Sampling, Accuracy/Precision, and A/D Conversion 4.3 Logic Diagrams, Boolean Algebra, and Control Logic

6 Chapter 5: Engineering Ethics and Societal Impacts

5.1 NCEES Model Rules of Professional Conduct and Codes of Ethics 5.2 Public Protection, Licensure Boards, and Professional Liability 5.3 Societal Impacts: Sustainability, Life-Cycle Analysis, and Public Safety

7 Chapter 6: Safety, Health, and Environment

6.1 OSHA Regulations, Industrial Hygiene, and PPE 6.2 Hazard Assessment, Risk Management, and Environmental Rules 6.3 Gas Detection and Monitoring 6.4 Electrical Safety 6.5 Confined Space Entry and Ventilation Rates

8 Chapter 7: Engineering Economics

7.1 Time Value of Money, Interest Formulas, and Cash Flow Diagrams 7.2 Capital Budgeting: Present Worth, Annual Worth, IRR, and B/C Ratio 7.3 Depreciation Methods, Income Taxes, and Breakeven Analysis 7.4 Cost Analysis, Uncertainty, Expected Value, and Decision Trees

9 Chapter 8: Statics

8.1 Statics Equilibrium, Free-Body Diagrams, and Force Systems 8.2 Distributed Loads, Resultants, and Equivalent Force-Couple Systems 8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction 8.4 Three-Dimensional Equilibrium, Cables, and Pulley Systems 8.5 Area Properties: Centroids, Moments of Inertia, and Radius of Gyration 8.6 Weight, Mass, and Force Units: slug, lbm, lbf, and g_c

10 Chapter 9: Dynamics

9.1 Kinematics of Particles and Rigid Bodies 9.2 Newton's Second Law for Particles and Rigid Bodies 9.3 Angular Motion, Torque, and Mass Moment of Inertia 9.4 Work-Energy Principle, Power, and Efficiency 9.5 Impulse-Momentum, Impact, and Coefficient of Restitution 9.6 Dynamic Friction and Vibrations: Natural Frequency and Damping

11 Chapter 10: Strength of Materials

10.1 Stress Types, Axial Stress-Strain, and Thermal Deformation 10.2 Torsion of Circular Shafts, Polar Moment, and Angle of Twist 10.3 Shear and Moment Diagrams 10.4 Flexural Bending Stress and Transverse Shear Stress 10.5 Stress Transformations, Principal Stresses, and Mohr's Circle 10.6 Beam Deflections and Combined Axial/Bending Loading 10.7 Column Buckling (Euler Formula) and Yield/Failure Criteria

12 Chapter 11: Materials

11.1 Crystal Structure, Phase Diagrams, and Material Processing 11.2 Mechanical Properties, Fatigue, Fracture, and Corrosion 11.3 Thermal Properties of Materials 11.4 Electrical and Chemical Properties of Materials 11.5 Material Selection for Engineering Design

13 Chapter 12: Fluid Mechanics

12.1 Fluid Properties, Hydrostatic Pressure, and Manometry 12.2 Dimensionless Numbers and Flow Regimes 12.3 Continuity Equation, Bernoulli Equation, and Energy Equation 12.4 Impulse-Momentum Equation and Forces on Control Volumes 12.5 Flow in Pipes, Friction Factors (Moody Diagram), and Head Losses 12.6 Turbomachinery: Pumps, Turbines, Fans, and Compressors 12.7 Open-Channel Flow, Manning's Equation, and Drag 12.8 Fluid Transport Systems and Flow Measurement 12.9 Ideal Gas Law, Gas Mixtures, and the Real Gas Law

14 Chapter 13: Basic Electrical Engineering

13.1 Electrical Fundamentals, Ohm's Law, and DC Circuits 13.2 AC Circuits, Phasors, Impedance, and Three-Phase Power 13.3 Magnetic Fields, Induction, Transformers, and Motor Efficiency 13.4 Electrical Measuring Devices: Voltmeter, Ammeter, and Wattmeter

15 Chapter 14: Thermodynamics and Heat Transfer

14.1 First & Second Laws of Thermodynamics and Pure Substance Properties 14.2 Thermodynamic Processes and Property Diagrams (T-s, P-h, P-v) 14.3 Heat Transfer: Conduction, Convection, and Radiation 14.4 Ideal Gas Processes and Power/Refrigeration Cycles 14.5 Mass and Energy Balances on Control Volumes 14.6 Combustion and Combustion Products 14.7 Psychrometrics: Relative Humidity, Wet-Bulb Temperature, and the Psychrometric Chart

8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction

Key Takeaways Explain This Topic AI

The method of joints solves two unknowns per joint and is fastest when every member force is needed; the method of sections cuts through at most three unknown members and is fastest for one interior member.

A two-member unloaded joint has both members at zero force, and a three-member joint with two collinear members puts the third at zero force.

Frames and machines contain multi-force members, so they must be dismembered and analyzed member by member.

Impending sliding requires F = mu_s N, while the block tips instead of sliding when the required friction exceeds what tipping geometry allows.

Truss members in compression must also be checked against Euler buckling, which is covered in the Strength of Materials chapter.

Last updated: August 2026

8.3 Internal Forces in Rigid Bodies: Trusses, Frames, Machines, and Friction

Engineering Application: Structural analysis relies on evaluating internal axial forces in trusses, multi-force pin interactions in frames, geometric properties (centroids and moments of inertia) for stress analysis, and contact friction thresholds governing mechanical stability.

Analysis of Planar Trusses

A truss is a structure composed of slender members joined together at their end points by smooth pins. Standard FE exam truss analysis assumes:

All members are weightless two-force members carrying purely axial tension ( T > 0 T > 0 T > 0 ) or compression ( C < 0 C < 0 C < 0 ).

External loads and support reactions are applied exclusively at pin joints.

Method of Joints

The Method of Joints analyzes the static equilibrium of individual pin joints ( ∑ F x = 0 , ∑ F y = 0 \sum F_x = 0, \sum F_y = 0 ∑ F x ​ = 0 , ∑ F y ​ = 0 ). It is ideal when finding forces in all members sequentially starting from a joint with at most two unknown member forces.

Method of Sections

The Method of Sections cuts through a portion of the truss to expose internal member forces. By treating the isolated section as a rigid body in coplanar equilibrium, you can solve for up to three unknown member forces simultaneously using: ∑ F x = 0 , ∑ F y = 0 , ∑ M O = 0 \sum F_x = 0, \quad \sum F_y = 0, \quad \sum M_O = 0 ∑ F x ​ = 0 , ∑ F y ​ = 0 , ∑ M O ​ = 0

Strategy: To isolate a specific member force, sum moments about the intersection point of the remaining cut members.

Identification of Zero-Force Members

Inspecting joints for zero-force members simplifies truss analysis prior to writing equilibrium equations:

Case 1 (Two non-collinear members): If a joint connects only two non-collinear members and has no external load or support reaction, both members are zero-force members .

Case 2 (Three members, two collinear): If a joint connects three members with no external load or support reaction, and two of the members are collinear, the third non-collinear member is a zero-force member .

  • Frames, Machines, and Dry Coulomb Friction
  • Frames and Machines

Unlike trusses, frames and machines contain at least one multi-force member —a structural component subjected to three or more forces or moments (causing bending). To analyze frames:

Isolate the entire frame to find external support reactions.

Disassemble the frame into individual components.

Apply Newton's Third Law ( F A / B = − F B / A F_{A/B} = -F_{B/A} F A / B ​ = − F B / A ​ ) at all connecting pins and solve member equilibrium equations.

Dry Coulomb Friction Laws

Dry friction occurs between non-lubricated contacting surfaces. The maximum static friction force F s , max ⁡ F_{s,\max} F s , m a x ​ before sliding occurs is proportional to the normal force N N N : F f ≤ F s , max ⁡ = μ s N F_f \le F_{s,\max} = \mu_s N F f ​ ≤ F s , m a x ​ = μ s ​ N

where μ s \mu_s μ s ​ is the coefficient of static friction. Once motion impends, the angle of static friction θ s \theta_s θ s ​ relates to μ s \mu_s μ s ​ by: tan ⁡ θ s = μ s \tan \theta_s = \mu_s tan θ s ​ = μ s ​

When sliding occurs, the kinetic friction force acts opposing motion with magnitude: F k = μ k N F_k = \mu_k N F k ​ = μ k ​ N

where μ k \mu_k μ k ​ is the coefficient of kinetic friction (typically μ k < μ s \mu_k < \mu_s μ k ​ < μ s ​ ).

Tipping vs. Sliding Criteria

For a rigid block of width w w w and height h h h subjected to a horizontal force P P P applied at height y y y :

Sliding occurs first if P > μ s W P > \mu_s W P > μ s ​ W .

Tipping occurs first if the line of action of the normal force moves beyond the footprint boundary ( x > w / 2 x > w/2 x > w /2 ), requiring P > W ( w 2 h ) P > W \left( \frac{w}{2h} \right) P > W ( 2 h w ​ ) .

  • Worked Engineering Problems
  • Problem 1: Truss Method of Sections with Zero-Force Member Identification

Scenario: A planar Pratt bridge truss features panels of width b = 3.0 m b = 3.0\text{ m} b = 3.0 m and vertical post height h = 4.0 m h = 4.0\text{ m} h = 4.0 m . Joints A , B , C , D A, B, C, D A , B , C , D lie along the bottom chord, while E , F , G E, F, G E , F , G lie along the top chord. A vertical downward load of P = 60 kN P = 60\text{ kN} P = 60 kN is applied at bottom joint B B B . Determine if vertical post F B FB FB is a zero-force member, and calculate the force in top chord member E F EF EF .

Solution:

Inspect joint F F F for zero-force members: At top chord joint F F F , horizontal members E F EF EF and F G FG FG are collinear. No external load is applied at joint F F F . Vertical post F B FB FB connects to joint F F F perpendicular to the collinear line. By Case 2 zero-force member rules, ∑ F y = 0 ⟹ F F B = 0 kN \sum F_y = 0 \implies F_{FB} = 0\text{ kN} ∑ F y ​ = 0 ⟹ F FB ​ = 0 kN . Post F B FB FB is a zero-force member.

Calculate global support reactions: Assume symmetric span L = 12.0 m L = 12.0\text{ m} L = 12.0 m with pin at A A A and roller at D D D . Reaction at A A A : A y = 45 kN A_y = 45\text{ kN} A y ​ = 45 kN , reaction at D D D : D y = 15 kN D_y = 15\text{ kN} D y ​ = 15 kN .

Method of Sections cut through members E F EF EF , E B EB EB , and A B AB A B : Pass a vertical section cut through panel 1. Isolate the left portion of the truss.

Sum moments about bottom joint B B B ( x = 3.0 m x = 3.0\text{ m} x = 3.0 m ): ∑ M B = 0 ⟹ A y ( 3.0 m ) + F E F ( 4.0 m ) = 0 \sum M_B = 0 \implies A_y (3.0\text{ m}) + F_{EF} (4.0\text{ m}) = 0 ∑ M B ​ = 0 ⟹ A y ​ ( 3.0 m ) + F EF ​ ( 4.0 m ) = 0 ( 45 kN ) ( 3.0 m ) + F E F ( 4.0 m ) = 0 (45\text{ kN})(3.0\text{ m}) + F_{EF}(4.0\text{ m}) = 0 ( 45 kN ) ( 3.0 m ) + F EF ​ ( 4.0 m ) = 0 135 + 4.0 F E F = 0 ⟹ F E F = − 33.75 kN 135 + 4.0 F_{EF} = 0 \implies F_{EF} = -33.75\text{ kN} 135 + 4.0 F EF ​ = 0 ⟹ F EF ​ = − 33.75 kN

The negative sign confirms that member E F EF EF is in compression with magnitude 33.75 kN 33.75\text{ kN} 33.75 kN .

Problem 2: Composite Area Centroid and Parallel Axis Moment of Inertia

Scenario: A structural T-section beam cross section consists of a top flange ( 200 mm 200\text{ mm} 200 mm wide by 20 mm 20\text{ mm} 20 mm thick) welded to a vertical web ( 20 mm 20\text{ mm} 20 mm wide by 180 mm 180\text{ mm} 180 mm high). Determine the centroid location y ˉ \bar{y} y ˉ ​ measured from the bottom edge of the web and compute the total centroidal area moment of inertia I x I_x I x ​ .

Solution:

Partition into two rectangles:

Segment 1 (Web): A 1 = 20 × 180 = 3600 mm 2 A_1 = 20 \times 180 = 3600\text{ mm}^2 A 1 ​ = 20 × 180 = 3600 mm 2 , centroid y ˉ 1 = 90 mm \bar{y}_1 = 90\text{ mm} y ˉ ​ 1 ​ = 90 mm .

Segment 2 (Flange): A 2 = 200 × 20 = 4000 mm 2 A_2 = 200 \times 20 = 4000\text{ mm}^2 A 2 ​ = 200 × 20 = 4000 mm 2 , centroid y ˉ 2 = 180 + 10 = 190 mm \bar{y}_2 = 180 + 10 = 190\text{ mm} y ˉ ​ 2 ​ = 180 + 10 = 190 mm .

Total Area A = 3600 + 4000 = 7600 mm 2 A = 3600 + 4000 = 7600\text{ mm}^2 A = 3600 + 4000 = 7600 mm 2 .

Calculate composite centroid y ˉ \bar{y} y ˉ ​ : y ˉ = A 1 y ˉ 1 + A 2 y ˉ 2 A = ( 3600 ) ( 90 ) + ( 4000 ) ( 190 ) 7600 = 324 , 000 + 760 , 000 7600 = 1 , 084 , 000 7600 ≈ 142.63 mm \bar{y} = \frac{A_1 \bar{y}_1 + A_2 \bar{y}_2}{A} = \frac{(3600)(90) + (4000)(190)}{7600} = \frac{324,000 + 760,000}{7600} = \frac{1,084,000}{7600} \approx 142.63\text{ mm} y ˉ ​ = A A 1 ​ y ˉ ​ 1 ​ + A 2 ​ y ˉ ​ 2 ​ ​ = 7600 ( 3600 ) ( 90 ) + ( 4000 ) ( 190 ) ​ = 7600 324 , 000 + 760 , 000 ​ = 7600 1 , 084 , 000 ​ ≈ 142.63 mm

Apply Parallel Axis Theorem I x = ∑ ( I c x , i + A i d i 2 ) I_x = \sum (I_{cx,i} + A_i d_i^2) I x ​ = ∑ ( I c x , i ​ + A i ​ d i 2 ​ ) :

Web offset d 1 = ∣ y ˉ − y ˉ 1 ∣ = ∣ 142.63 − 90 ∣ = 52.63 mm d_1 = |\bar{y} - \bar{y}_1| = |142.63 - 90| = 52.63\text{ mm} d 1 ​ = ∣ y ˉ ​ − y ˉ ​ 1 ​ ∣ = ∣142.63 − 90∣ = 52.63 mm . I c x 1 = 1 12 ( 20 ) ( 180 ) 3 = 9.720 × 10 6 mm 4 I_{cx1} = \frac{1}{12}(20)(180)^3 = 9.720 \times 10^6\text{ mm}^4 I c x 1 ​ = 12 1 ​ ( 20 ) ( 180 ) 3 = 9.720 × 1 0 6 mm 4 I x 1 = 9.720 × 10 6 + ( 3600 ) ( 52.63 ) 2 = 9.720 × 10 6 + 9.972 × 10 6 = 19.692 × 10 6 mm 4 I_{x1} = 9.720 \times 10^6 + (3600)(52.63)^2 = 9.720 \times 10^6 + 9.972 \times 10^6 = 19.692 \times 10^6\text{ mm}^4 I x 1 ​ = 9.720 × 1 0 6 + ( 3600 ) ( 52.63 ) 2 = 9.720 × 1 0 6 + 9.972 × 1 0 6 = 19.692 × 1 0 6 mm 4

Flange offset d 2 = ∣ y ˉ − y ˉ 2 ∣ = ∣ 142.63 − 190 ∣ = 47.37 mm d_2 = |\bar{y} - \bar{y}_2| = |142.63 - 190| = 47.37\text{ mm} d 2 ​ = ∣ y ˉ ​ − y ˉ ​ 2 ​ ∣ = ∣142.63 − 190∣ = 47.37 mm . I c x 2 = 1 12 ( 200 ) ( 20 ) 3 = 0.1333 × 10 6 mm 4 I_{cx2} = \frac{1}{12}(200)(20)^3 = 0.1333 \times 10^6\text{ mm}^4 I c x 2 ​ = 12 1 ​ ( 200 ) ( 20 ) 3 = 0.1333 × 1 0 6 mm 4 I x 2 = 0.1333 × 10 6 + ( 4000 ) ( 47.37 ) 2 = 0.1333 × 10 6 + 8.976 × 10 6 = 9.109 × 10 6 mm 4 I_{x2} = 0.1333 \times 10^6 + (4000)(47.37)^2 = 0.1333 \times 10^6 + 8.976 \times 10^6 = 9.109 \times 10^6\text{ mm}^4 I x 2 ​ = 0.1333 × 1 0 6 + ( 4000 ) ( 47.37 ) 2 = 0.1333 × 1 0 6 + 8.976 × 1 0 6 = 9.109 × 1 0 6 mm 4

Sum total centroidal moment of inertia I x I_x I x ​ : I x = I x 1 + I x 2 = 19.692 × 10 6 + 9.109 × 10 6 = 28.801 × 10 6 mm 4 ≈ 2.88 × 10 7 mm 4 I_x = I_{x1} + I_{x2} = 19.692 \times 10^6 + 9.109 \times 10^6 = 28.801 \times 10^6\text{ mm}^4 \approx 2.88 \times 10^7\text{ mm}^4 I x ​ = I x 1 ​ + I x 2 ​ = 19.692 × 1 0 6 + 9.109 × 1 0 6 = 28.801 × 1 0 6 mm 4 ≈ 2.88 × 1 0 7 mm 4