Study guide

5.4 Metes and Bounds Descriptions and Monuments

NCEES Fundamentals of Surveying FS

Track your progress as you read

Finished sections get a check mark.

1 Orientation: NCEES FS Exam Registration and Scoring

1.1 Official FS Identity and Licensure Purpose 1.2 CBT Delivery, Appointment Timing, and Breaks 1.3 Registration, Fees, Board Approval, and Scheduling 1.4 Reference Handbook, Calculator, and Exam Interface Habits 1.5 Scoring, Pass/Fail Results, and Diagnostics 1.6 First Study Plan From Official Content Areas

2 Surveying Processes, Instrumentation, Control, and Field Workflows

2.1 Instrumentation Selection, Setup, and Observation Quality 2.2 GNSS/GPS Survey Modes, Datums, and Field Checks 2.3 Control Surveys, Networks, Traverses, and Benchmarks 2.4 Topographic Surveys, Feature Coding, and Field Records 2.5 Construction, As-Built, and Land Development Workflows 2.6 Cadastral Field Workflows and Record Keeping

3 Mapping Processes: CAD, GIS, Photogrammetry, UAS, and LiDAR

3.1 Map Purpose, Scale, Symbols, and Generalization 3.2 Topographic Mapping, Contours, and Digital Terrain Models 3.3 CAD, BIM, and Plan Production Workflows 3.4 GIS Data Models, Coordinate Systems, and Attribute Quality 3.5 Photogrammetry, UAS, and Image Processing 3.6 LiDAR, Remote Sensing, and Mapping Quality Control

4 Boundary Law: Public Records, Deeds, and Evidence

4.1 Boundary Law Sources and the Surveyor's Role 4.2 Public Records Research and Indexing 4.3 Deeds, Conveyances, and Description Elements 4.4 Evidence Weighting: Monuments, Measurements, and Occupation 4.5 Chain of Title, Senior Rights, and Record Conflicts 4.6 Ownership Rights, Minerals, Encumbrances, and Survey Reporting

5 Boundary Law: Easements, PLSS, Water Law, and Conveyances

5.1 Common-Law Principles and Unwritten Rights 5.2 Easements, Licenses, and Rights-of-Way 5.3 Conveyances, Sequential and Simultaneous Rights 5.4 Metes and Bounds Descriptions and Monuments 5.5 PLSS Sections, Townships, and Restoration 5.6 Water Law: Riparian, Littoral, and Moving Boundaries 5.7 Encumbrances, Title Limitations, and Survey Reporting

6 Surveying Principles: Geodesy, Datums, Projections, and SPCS

6.1 Basic Surveying, Route Surveying, and Field Geometry 6.2 Geodesy, Earth Models, and Coordinate Systems 6.3 Horizontal and Vertical Datums 6.4 Map Projections, Convergence, and SPCS 6.5 Coordinate Transformations and Grid-Ground Reductions 6.6 Control Networks, Observation Reductions, and Quality

7 Survey Computations: Bearings, Traverses, Leveling, and COGO

7.1 Bearings, Azimuths, and Direction Conversions 7.2 Coordinate Geometry, Latitudes, and Departures 7.3 Traverse Closure, Error, and Relative Precision 7.4 Traverse Adjustment: Compass Rule and Transit Rule 7.5 Differential Leveling, Height of Instrument, and Closure 7.6 Trigonometric Leveling, Reciprocal Observations, and Spreadsheets

8 Survey Computations: Curves, Volumes, Least Squares, and Computer Applications

8.1 Horizontal Circular Curve Elements 8.2 Curve Staking, Deflections, Offsets, and Coordinate Points 8.3 Vertical Curves, Slopes, and Grades 8.4 Area Computations: Coordinate and Field Methods 8.5 Earthwork Volumes, Contours, and Mass Diagrams 8.6 Least Squares, Residuals, and Error Propagation 8.7 Computer Applications, Calculator, and Spreadsheet Quality Control

9 Applied Mathematics, Statistics, Measurement Science, and Error

9.1 Trigonometry and Right-Triangle Field Reductions 9.2 Analytical Geometry, Coordinate Systems, and Vectors 9.3 Calculus, Change Rates, and Area-Volume Reasoning 9.4 Linear Algebra, Adjustments, and Least-Squares Foundations 9.5 Probability, Statistics, and the Normal Distribution 9.6 Measurement Error, Propagation, Positional Accuracy, and Units

10 Business Concepts, Projects, Safety, Contracts, Ethics, and Communication

10.1 Project Planning, Scope, and Work Breakdown 10.2 Resource Management, Scheduling, and Cost Estimating 10.3 Safety, Risk Management, and Site Liability 10.4 Contracts, Liability, and Change Management 10.5 Supervision, Quality Control, and Records 10.6 Ethics, Communication, and Conflict Resolution

11 Integrated FS Domain Review, Handbook Pacing, and Diagnostics

11.1 Build an Integrated Domain Map 11.2 Reference Handbook Search Workflow 11.3 Approved Calculator Habits 11.4 Pace the 5 Hours 20 Minutes of Exam Time 11.5 Use Diagnostics After a Failed Attempt 11.6 Avoid Common Wrong-Answer Patterns

12 Full FS Scenarios, Final Readiness, and Post-Exam Next Steps

12.1 Mixed Boundary and COGO Scenario 12.2 Geodesy, Mapping, and Field Scenario 12.3 Business, Safety, and Ethics Scenario 12.4 Final Readiness Plan 12.5 Exam-Day Checklist 12.6 Post-Exam Next Steps After Pass or Fail

5.4 Metes and Bounds Descriptions and Monuments

Key Takeaways Explain This Topic AI

A metes-and-bounds description follows courses (bearings and distances) and calls (monuments, adjoiners, natural features) around a parcel from a point of beginning back to itself.

Priority of calls (dignity of calls): natural monuments, then artificial monuments, then adjoiners, then courses and distances (course usually over distance), then area last.

A reliable original monument generally controls over a conflicting record distance — hold the corner, not the math.

Closure is a quality check, not a title rule; a large misclosure flags a description or measurement defect to investigate, not a license to force the parcel closed.

Last updated: June 2026

Reading Metes and Bounds Like a Retracement Surveyor

A metes-and-bounds description defines land by courses and calls running around the perimeter. The metes are measurements (bearings and distances); the bounds are the objects or limits called for (a river, road, stone, iron pipe, or adjoining owner). FS questions ask you to spot a defective description, choose the controlling call, compute closure, or decide which field evidence to recover before setting a corner.

A complete description starts at a point of beginning (POB) , then follows each course in turn until it returns to the POB. It may call for monuments, adjoiners, record lines, curves, or natural features, and may state an area — but area is one of the weakest calls when stronger evidence exists. A parcel "containing 10 acres more or less" is not stretched or shrunk just to total exactly 10 acres.

Element Example Exam significance

Point of beginning "Beginning at a found iron pipe at the SW corner" Anchors the description to recoverable evidence

  • Course "North 42 degrees East, 250.00 feet" Direction (bearing) and distance between calls
  • Natural monument "Along the bank of the river" Strong evidence if identifiable and intended

Artificial monument "To a found stone / iron pipe / axle" Can control over measurements if original and reliable

  • Adjoiner call "Along the east line of Smith" Ties the parcel to a senior neighbor's line
  • Area "Containing 2.35 acres, more or less" Weakest call; supporting evidence only

Priority of Calls (Dignity of Calls)

When the parts of a description conflict and cannot all be true, surveyors and courts apply the priority of calls (also called dignity of calls or rules of construction ). The standard order, from strongest to weakest:

Natural monuments (rivers, ridges, large rock formations) — nature did not place them to deceive, and they are hard to relocate.

Artificial monuments (iron pipes, stones, brass disks, axles) — if original and reliable.

Adjoiners (calls for a senior neighbor's established line).

Courses and distances — when no monuments or adjoiners control; by the general rule course (bearing) controls over distance , though some states reverse this.

Area — the weakest of all and the first to yield.

This hierarchy is a guide to the parties' likely intent , not a mechanical formula. A found pipe controls only if accepted as the called-for original (or a reliable perpetuation of it). The classic exam fact pattern gives a found original monument and a slightly different record distance: the monument controls because it is better evidence of where the original line was run. A record distance prevails only when the monument is gone and no stronger evidence remains.

Bearings, Bases, and Curves

Courses are stated as a bearing and a distance . Bearings are measured from north or south, toward east or west, as an angle of 0 to 90 degrees — for example, N 42 degrees E or S 17 degrees 30 minutes W . The exam expects you to read quadrant bearings fluently and to recognize that two descriptions can share geometry yet differ by a rotated basis of bearings (true north, grid north, magnetic, or an assumed datum).

Old deeds often use magnetic bearings , which drift with magnetic declination over time, so an apparent bearing conflict between an 1880 deed and a modern survey may be a datum difference rather than a true discrepancy.

Curved boundaries add elements the description must supply: the radius , the central (delta) angle , the arc length , the chord bearing , and the chord length , plus whether the curve is concave left or right and tangent to the adjacent course. A missing curve element is a common cause of misclosure. When a description calls "thence along a curve to the right" without enough data to fix it, the surveyor flags the patent defect rather than guessing the radius.

Closure, Retracement, and Ambiguity

Closure is a computational check, not a title rule. If the bearings and distances do not mathematically close, investigate for a transcription error, an omitted curve, a wrong bearing quadrant, or a field condition — do not force the parcel closed without explanation. A large misclosure usually signals a drafting error or insufficient data; the correct response is to identify the defect and seek more evidence.

Retracement means following the footsteps of the original surveyor as closely as the evidence allows. A modern measurement that differs from an old record distance does not by itself defeat an original monument; conversely, a freshly set marker with no record support should not override the deed. Questions test this balance by pairing precise measurements with older physical evidence.

Ambiguities are patent or latent . A patent ambiguity appears on the face of the document (a missing course, an impossible call). A latent ambiguity appears only when applying the description on the ground (two stones each fit one call). The surveyor documents the ambiguity and resolves it where survey evidence permits; where intent cannot be determined from survey evidence, legal construction may be required.

Practice marking each call: circle the POB, underline monuments, label adjoiners, list courses, and compute closure — then ask which evidence best reflects the original conveyance, not which answer is mathematically neatest.