Study guide
3.5 Photogrammetry, UAS, and Image Processing
NCEES Fundamentals of Surveying FS
Track your progress as you read
Finished sections get a check mark.
1 Orientation: NCEES FS Exam Registration and Scoring
1.1 Official FS Identity and Licensure Purpose 1.2 CBT Delivery, Appointment Timing, and Breaks 1.3 Registration, Fees, Board Approval, and Scheduling 1.4 Reference Handbook, Calculator, and Exam Interface Habits 1.5 Scoring, Pass/Fail Results, and Diagnostics 1.6 First Study Plan From Official Content Areas
2 Surveying Processes, Instrumentation, Control, and Field Workflows
2.1 Instrumentation Selection, Setup, and Observation Quality 2.2 GNSS/GPS Survey Modes, Datums, and Field Checks 2.3 Control Surveys, Networks, Traverses, and Benchmarks 2.4 Topographic Surveys, Feature Coding, and Field Records 2.5 Construction, As-Built, and Land Development Workflows 2.6 Cadastral Field Workflows and Record Keeping
3 Mapping Processes: CAD, GIS, Photogrammetry, UAS, and LiDAR
3.1 Map Purpose, Scale, Symbols, and Generalization 3.2 Topographic Mapping, Contours, and Digital Terrain Models 3.3 CAD, BIM, and Plan Production Workflows 3.4 GIS Data Models, Coordinate Systems, and Attribute Quality 3.5 Photogrammetry, UAS, and Image Processing 3.6 LiDAR, Remote Sensing, and Mapping Quality Control
4 Boundary Law: Public Records, Deeds, and Evidence
4.1 Boundary Law Sources and the Surveyor's Role 4.2 Public Records Research and Indexing 4.3 Deeds, Conveyances, and Description Elements 4.4 Evidence Weighting: Monuments, Measurements, and Occupation 4.5 Chain of Title, Senior Rights, and Record Conflicts 4.6 Ownership Rights, Minerals, Encumbrances, and Survey Reporting
5 Boundary Law: Easements, PLSS, Water Law, and Conveyances
5.1 Common-Law Principles and Unwritten Rights 5.2 Easements, Licenses, and Rights-of-Way 5.3 Conveyances, Sequential and Simultaneous Rights 5.4 Metes and Bounds Descriptions and Monuments 5.5 PLSS Sections, Townships, and Restoration 5.6 Water Law: Riparian, Littoral, and Moving Boundaries 5.7 Encumbrances, Title Limitations, and Survey Reporting
6 Surveying Principles: Geodesy, Datums, Projections, and SPCS
6.1 Basic Surveying, Route Surveying, and Field Geometry 6.2 Geodesy, Earth Models, and Coordinate Systems 6.3 Horizontal and Vertical Datums 6.4 Map Projections, Convergence, and SPCS 6.5 Coordinate Transformations and Grid-Ground Reductions 6.6 Control Networks, Observation Reductions, and Quality
7 Survey Computations: Bearings, Traverses, Leveling, and COGO
7.1 Bearings, Azimuths, and Direction Conversions 7.2 Coordinate Geometry, Latitudes, and Departures 7.3 Traverse Closure, Error, and Relative Precision 7.4 Traverse Adjustment: Compass Rule and Transit Rule 7.5 Differential Leveling, Height of Instrument, and Closure 7.6 Trigonometric Leveling, Reciprocal Observations, and Spreadsheets
8 Survey Computations: Curves, Volumes, Least Squares, and Computer Applications
8.1 Horizontal Circular Curve Elements 8.2 Curve Staking, Deflections, Offsets, and Coordinate Points 8.3 Vertical Curves, Slopes, and Grades 8.4 Area Computations: Coordinate and Field Methods 8.5 Earthwork Volumes, Contours, and Mass Diagrams 8.6 Least Squares, Residuals, and Error Propagation 8.7 Computer Applications, Calculator, and Spreadsheet Quality Control
9 Applied Mathematics, Statistics, Measurement Science, and Error
9.1 Trigonometry and Right-Triangle Field Reductions 9.2 Analytical Geometry, Coordinate Systems, and Vectors 9.3 Calculus, Change Rates, and Area-Volume Reasoning 9.4 Linear Algebra, Adjustments, and Least-Squares Foundations 9.5 Probability, Statistics, and the Normal Distribution 9.6 Measurement Error, Propagation, Positional Accuracy, and Units
10 Business Concepts, Projects, Safety, Contracts, Ethics, and Communication
10.1 Project Planning, Scope, and Work Breakdown 10.2 Resource Management, Scheduling, and Cost Estimating 10.3 Safety, Risk Management, and Site Liability 10.4 Contracts, Liability, and Change Management 10.5 Supervision, Quality Control, and Records 10.6 Ethics, Communication, and Conflict Resolution
11 Integrated FS Domain Review, Handbook Pacing, and Diagnostics
11.1 Build an Integrated Domain Map 11.2 Reference Handbook Search Workflow 11.3 Approved Calculator Habits 11.4 Pace the 5 Hours 20 Minutes of Exam Time 11.5 Use Diagnostics After a Failed Attempt 11.6 Avoid Common Wrong-Answer Patterns
12 Full FS Scenarios, Final Readiness, and Post-Exam Next Steps
12.1 Mixed Boundary and COGO Scenario 12.2 Geodesy, Mapping, and Field Scenario 12.3 Business, Safety, and Ethics Scenario 12.4 Final Readiness Plan 12.5 Exam-Day Checklist 12.6 Post-Exam Next Steps After Pass or Fail
3.5 Photogrammetry, UAS, and Image Processing
Key Takeaways Explain This Topic AI
Vertical-photo scale is S = f/(H - h): focal length over flying height above the terrain; scale changes with ground elevation.
Relief displacement d = r*h/H pushes images of tall objects radially outward from the principal point.
Aerial blocks use ~60% forward overlap and ~30% sidelap so every point appears in a stereo pair for 3D measurement.
Ground control points (GCPs) georeference and check a UAS block; an orthophoto is corrected for relief but is still an image, not a survey.
Last updated: June 2026
Photo Scale, Flying Height, and Relief Displacement
Photogrammetry extracts measurements from overlapping imagery using camera geometry and control. For a near-vertical aerial photo the scale is:
S = f / (H - h)
where f is the camera focal length, H is the flying height above the datum, and h is the ground elevation. Because h varies, photo scale is not constant — higher ground sits closer to the camera and images at a larger scale than low ground. (Equivalently, scale = photo distance / ground distance.)
Relief displacement is the radial shift of an object's image caused by its height above the datum:
d = r * h / H
where d is the displacement on the photo, r is the radial distance from the principal point (photo center) to the top of the object, h is the object's height, and H is the flying height above its base. Key consequences tested on the FS exam:
Displacement is radial outward from the principal point; the top of a building leans away from center.
It is zero at the principal point and greatest at the photo edges and for tall objects.
It is the basis for measuring object heights from a single photo, but it also distorts a raw photo so it cannot be used as a map.
- Quantity Relationship
- Photo scale S = f / (H - h)
- Relief displacement d = r h / H
- Object height from d h = d H / r
Stereo Geometry, Overlap, and Ground Sample Distance
Three-dimensional measurement requires stereo coverage : each ground point must appear on at least two overlapping photos so the viewing geometry can be intersected. Standard aerial blocks fly with about 60% forward overlap (endlap) along a flight line and about 30% sidelap between adjacent lines. The apparent shift of a point between the two images of a stereo pair is parallax , and parallax differences yield elevation.
For digital and UAS cameras, the practical resolution metric is ground sample distance (GSD) — the ground size of one pixel:
GSD = (sensor pixel size x flying height) / focal length
equivalently GSD = (flying height x sensor width) / (focal length x image width in pixels). Lower altitude yields finer GSD (smaller ground distance per pixel) and more detail; higher altitude covers more ground per image but coarsens GSD. GSD drives both the smallest mappable feature and the achievable positional accuracy.
UAS Flight Planning and Ground Control
Unmanned aircraft systems (UAS / drones) map by capturing many overlapping photos processed with structure-from-motion (SfM) into a point cloud, surface, and orthophoto. A sound UAS survey requires:
A flight plan : altitude (for target GSD), overlap (often 70-80% for SfM), and pattern.
Ground control points (GCPs) — surveyed, well-distributed targets that georeference the block to a datum and scale it.
Independent check points — surveyed points withheld from the solution and used to verify accuracy.
Adequate overlap, lighting, and texture for the matching algorithm.
GCPs anchor absolute accuracy; without them (or without RTK/PPK direct georeferencing) the model can be internally consistent yet absolutely wrong. Check points, not the processing software's internal report, are how accuracy is verified.
Orthophotos and the Limits of Imagery
A raw aerial or UAS photo contains relief displacement and tilt and cannot be scaled as a map . Orthorectification uses a terrain model and the camera geometry to remove relief and tilt distortion, producing an orthophoto with uniform scale on which true distances and directions can be measured. The orthophoto's quality is bounded by the terrain model used to rectify it, the GCPs , and the GSD .
The enduring FS lesson is that imagery maps visible surfaces well but has limits:
It cannot see hidden or subsurface features (utilities under pavement, monuments under brush).
It records the top reflective surface , so SfM over dense canopy yields a DSM, not bare earth.
It does not establish boundaries ; corners are legal/record evidence, not image features.
So imagery is excellent for planimetric mapping, volumes, and inspection, but boundary and hidden-feature decisions still require conventional ground survey.
Interior and Exterior Orientation
Reconstructing ground geometry from photos requires two sets of parameters the FS exam names. Interior orientation describes the camera itself: the focal length (principal distance) , the location of the principal point , and lens distortion — values fixed by camera calibration . Exterior orientation describes where and how the camera was pointed for each exposure: its three position coordinates and three rotation angles (omega, phi, kappa), six parameters per photo.
Solving exterior orientation for a whole block at once, tying photos together with overlap tie points and a few ground control points, is aerotriangulation (bundle adjustment) ; it minimizes the control needed.
The collinearity condition — that the ground point, the lens center, and the image point lie on one straight line — links these orientations to ground coordinates. You are not asked to solve it by hand on the FS, but recognize that interior plus exterior orientation, anchored by control, converts pixels to mapped positions.
Direct Georeferencing and Accuracy Expectations
Modern UAS often carry RTK or PPK GNSS , recording each camera position to centimeters. This direct georeferencing can reduce — though rarely eliminate — the number of ground control points, but independent check points are still required to verify accuracy . As a rule of thumb, horizontal accuracy tracks the GSD , while vertical accuracy is looser and more sensitive to control geometry and calibration. Flight planning is therefore a deliberate trade among altitude, overlap, control, and the accuracy the deliverable must meet.