Study guide

1.1 Official FS Identity and Licensure Purpose

NCEES Fundamentals of Surveying FS

Track your progress as you read

Finished sections get a check mark.

1 Orientation: NCEES FS Exam Registration and Scoring

1.1 Official FS Identity and Licensure Purpose 1.2 CBT Delivery, Appointment Timing, and Breaks 1.3 Registration, Fees, Board Approval, and Scheduling 1.4 Reference Handbook, Calculator, and Exam Interface Habits 1.5 Scoring, Pass/Fail Results, and Diagnostics 1.6 First Study Plan From Official Content Areas

2 Surveying Processes, Instrumentation, Control, and Field Workflows

2.1 Instrumentation Selection, Setup, and Observation Quality 2.2 GNSS/GPS Survey Modes, Datums, and Field Checks 2.3 Control Surveys, Networks, Traverses, and Benchmarks 2.4 Topographic Surveys, Feature Coding, and Field Records 2.5 Construction, As-Built, and Land Development Workflows 2.6 Cadastral Field Workflows and Record Keeping

3 Mapping Processes: CAD, GIS, Photogrammetry, UAS, and LiDAR

3.1 Map Purpose, Scale, Symbols, and Generalization 3.2 Topographic Mapping, Contours, and Digital Terrain Models 3.3 CAD, BIM, and Plan Production Workflows 3.4 GIS Data Models, Coordinate Systems, and Attribute Quality 3.5 Photogrammetry, UAS, and Image Processing 3.6 LiDAR, Remote Sensing, and Mapping Quality Control

4 Boundary Law: Public Records, Deeds, and Evidence

4.1 Boundary Law Sources and the Surveyor's Role 4.2 Public Records Research and Indexing 4.3 Deeds, Conveyances, and Description Elements 4.4 Evidence Weighting: Monuments, Measurements, and Occupation 4.5 Chain of Title, Senior Rights, and Record Conflicts 4.6 Ownership Rights, Minerals, Encumbrances, and Survey Reporting

5 Boundary Law: Easements, PLSS, Water Law, and Conveyances

5.1 Common-Law Principles and Unwritten Rights 5.2 Easements, Licenses, and Rights-of-Way 5.3 Conveyances, Sequential and Simultaneous Rights 5.4 Metes and Bounds Descriptions and Monuments 5.5 PLSS Sections, Townships, and Restoration 5.6 Water Law: Riparian, Littoral, and Moving Boundaries 5.7 Encumbrances, Title Limitations, and Survey Reporting

6 Surveying Principles: Geodesy, Datums, Projections, and SPCS

6.1 Basic Surveying, Route Surveying, and Field Geometry 6.2 Geodesy, Earth Models, and Coordinate Systems 6.3 Horizontal and Vertical Datums 6.4 Map Projections, Convergence, and SPCS 6.5 Coordinate Transformations and Grid-Ground Reductions 6.6 Control Networks, Observation Reductions, and Quality

7 Survey Computations: Bearings, Traverses, Leveling, and COGO

7.1 Bearings, Azimuths, and Direction Conversions 7.2 Coordinate Geometry, Latitudes, and Departures 7.3 Traverse Closure, Error, and Relative Precision 7.4 Traverse Adjustment: Compass Rule and Transit Rule 7.5 Differential Leveling, Height of Instrument, and Closure 7.6 Trigonometric Leveling, Reciprocal Observations, and Spreadsheets

8 Survey Computations: Curves, Volumes, Least Squares, and Computer Applications

8.1 Horizontal Circular Curve Elements 8.2 Curve Staking, Deflections, Offsets, and Coordinate Points 8.3 Vertical Curves, Slopes, and Grades 8.4 Area Computations: Coordinate and Field Methods 8.5 Earthwork Volumes, Contours, and Mass Diagrams 8.6 Least Squares, Residuals, and Error Propagation 8.7 Computer Applications, Calculator, and Spreadsheet Quality Control

9 Applied Mathematics, Statistics, Measurement Science, and Error

9.1 Trigonometry and Right-Triangle Field Reductions 9.2 Analytical Geometry, Coordinate Systems, and Vectors 9.3 Calculus, Change Rates, and Area-Volume Reasoning 9.4 Linear Algebra, Adjustments, and Least-Squares Foundations 9.5 Probability, Statistics, and the Normal Distribution 9.6 Measurement Error, Propagation, Positional Accuracy, and Units

10 Business Concepts, Projects, Safety, Contracts, Ethics, and Communication

10.1 Project Planning, Scope, and Work Breakdown 10.2 Resource Management, Scheduling, and Cost Estimating 10.3 Safety, Risk Management, and Site Liability 10.4 Contracts, Liability, and Change Management 10.5 Supervision, Quality Control, and Records 10.6 Ethics, Communication, and Conflict Resolution

11 Integrated FS Domain Review, Handbook Pacing, and Diagnostics

11.1 Build an Integrated Domain Map 11.2 Reference Handbook Search Workflow 11.3 Approved Calculator Habits 11.4 Pace the 5 Hours 20 Minutes of Exam Time 11.5 Use Diagnostics After a Failed Attempt 11.6 Avoid Common Wrong-Answer Patterns

12 Full FS Scenarios, Final Readiness, and Post-Exam Next Steps

12.1 Mixed Boundary and COGO Scenario 12.2 Geodesy, Mapping, and Field Scenario 12.3 Business, Safety, and Ethics Scenario 12.4 Final Readiness Plan 12.5 Exam-Day Checklist 12.6 Post-Exam Next Steps After Pass or Fail

1.1 Official FS Identity and Licensure Purpose

Key Takeaways Explain This Topic AI

The FS (Fundamentals of Surveying) exam is the NCEES entry exam to licensure as a Professional Surveyor (PS); passing it earns Surveyor Intern (SI) or Surveyor-in-Training (SIT) status.

The FS contains 110 questions and is a closed-book computer-based test with an on-screen NCEES FS Reference Handbook.

Passing FS does not grant a license; it is one of four steps: degree, FS exam, qualifying experience (commonly ~4 years), then the PS exam.

The FS is national and uniform across all member boards, but licensure rules (degree type, experience years, additional state-specific exams) are set state by state.

Last updated: June 2026

What the FS Exam Is

The Fundamentals of Surveying (FS) exam is a national, standardized examination written and owned by the National Council of Examiners for Engineering and Surveying (NCEES) . It is the first of two NCEES exams on the road to surveying licensure. The FS is designed for students nearing the end of an accredited surveying degree and recent graduates — it tests the breadth of fundamental knowledge a graduate should hold, not the seasoned judgment of a practicing professional.

The exam contains 110 questions , is closed book , and is delivered as a computer-based test (CBT) . "Closed book" does not mean you work from memory alone: NCEES supplies an on-screen, searchable FS Reference Handbook during the exam (covered in Section 1.4). The FS uses both the International System of Units (SI) and the U.S. Customary System (USCS) , so you must be fluent converting between feet, meters, and the survey foot.

FS, SI/SIT, and the Title You Earn

Passing the FS does not make you a licensed surveyor. It earns you the entry-level designation your state board uses — most commonly Surveyor Intern (SI) or Surveyor-in-Training (SIT) . This is a credential, not a license: it signals that you have demonstrated fundamental competence and may begin accumulating the supervised experience required for full licensure.

The full licensure pathway is a four-step sequence:

  • Step Milestone Typical requirement
  • 1 Education Surveying or related degree (often ABET/ABET-ANSAC accredited)
  • 2 FS exam Pass to earn SI / SIT status
  • 3 Experience Qualifying surveying experience under a licensed PS, commonly ~4 years
  • 4 PS exam Pass the Principles and Practice of Surveying exam

After Step 4, and after meeting any additional state requirements, you are eligible for the Professional Surveyor (PS) license — also titled PLS (Professional Land Surveyor), RLS, or LS depending on the state.

National Exam, State Licensure

A critical distinction for planning: the FS exam is national and uniform , but licensure is granted by individual state (and territorial) licensing boards , each a member of NCEES. The questions, scoring, and pass/fail standard are identical regardless of where you sit. What varies by jurisdiction is everything around the exam:

Eligibility to sit — some boards let you take the FS as a student; others require a degree first.

Degree requirements — accepted degrees and accreditation differ.

Experience — the number of years and the supervision rules vary.

State-specific exams — many states add a separate state-specific exam on local statutes, the Public Land Survey System history, water law, or recording practice, taken in addition to the FS and PS.

Because of this, your first action is not to study — it is to read your own state board's surveying licensure requirements so you take the FS at the right time and don't discover a missing prerequisite later. NCEES administers the exam; your board decides whether your result counts toward a license.

FS vs. FE, and Who Should Sit

Do not confuse the FS (Fundamentals of Surveying) with the FE (Fundamentals of Engineering) . They share a delivery model — same vendor, same CBT format, similar timing — but they are different exams with different blueprints and different reference handbooks . Surveying licensure flows FS then PS; engineering licensure flows FE then PE. A surveying candidate sits the FS, not the FE, unless a specific state pathway says otherwise.

The FS is built for two audiences:

Current students in a surveying or geomatics program who are within a term or two of graduating. Sitting while coursework is fresh — coordinate geometry, traverse adjustment, geodesy, boundary law — is the single biggest advantage you have, and most candidates who pass do so close to graduation.

Recent graduates who have entered practice but not yet cleared the fundamentals exam.

If you have been out of school for years, expect to re-learn the math-heavy areas (computations, geodesy, statistics) that fade fastest. The exam rewards breadth across all seven knowledge areas, so a strong field surveyor with weak academic math still has to rebuild those topics.

Why the FS Exists and What It Certifies

The FS exists because surveying is a regulated profession that affects property rights, public safety, and the legal record of land ownership . A licensed surveyor's stamp carries legal weight on plats, boundary determinations, and construction layout. Society protects that authority by requiring proof of competence, and the FS is the first standardized checkpoint: it certifies that, regardless of which school you attended, you command the common body of fundamental knowledge every entering surveyor should hold.

That is why the exam is broad rather than deep . It does not test the seasoned judgment of a 20-year practitioner; it confirms minimum competence across instrumentation, mapping, boundary law, geodesy, computations, business/ethics, and applied math. Keep this purpose in mind while studying:

The bar is minimum competence of a new graduate , not mastery — but minimum competence across every area , so you cannot skip a knowledge area you dislike.

Questions favor applying fundamentals (set up the right equation, read the right table, follow the correct procedure) over obscure trivia.

The credential you earn (SI/SIT) is recognized by NCEES member boards, giving you a portable first rung even if you later relocate to another state.