Study guide

1.5 Scoring, Pass/Fail Results, and Diagnostics

NCEES Fundamentals of Surveying FS

Track your progress as you read

Finished sections get a check mark.

1 Orientation: NCEES FS Exam Registration and Scoring

1.1 Official FS Identity and Licensure Purpose 1.2 CBT Delivery, Appointment Timing, and Breaks 1.3 Registration, Fees, Board Approval, and Scheduling 1.4 Reference Handbook, Calculator, and Exam Interface Habits 1.5 Scoring, Pass/Fail Results, and Diagnostics 1.6 First Study Plan From Official Content Areas

2 Surveying Processes, Instrumentation, Control, and Field Workflows

2.1 Instrumentation Selection, Setup, and Observation Quality 2.2 GNSS/GPS Survey Modes, Datums, and Field Checks 2.3 Control Surveys, Networks, Traverses, and Benchmarks 2.4 Topographic Surveys, Feature Coding, and Field Records 2.5 Construction, As-Built, and Land Development Workflows 2.6 Cadastral Field Workflows and Record Keeping

3 Mapping Processes: CAD, GIS, Photogrammetry, UAS, and LiDAR

3.1 Map Purpose, Scale, Symbols, and Generalization 3.2 Topographic Mapping, Contours, and Digital Terrain Models 3.3 CAD, BIM, and Plan Production Workflows 3.4 GIS Data Models, Coordinate Systems, and Attribute Quality 3.5 Photogrammetry, UAS, and Image Processing 3.6 LiDAR, Remote Sensing, and Mapping Quality Control

4 Boundary Law: Public Records, Deeds, and Evidence

4.1 Boundary Law Sources and the Surveyor's Role 4.2 Public Records Research and Indexing 4.3 Deeds, Conveyances, and Description Elements 4.4 Evidence Weighting: Monuments, Measurements, and Occupation 4.5 Chain of Title, Senior Rights, and Record Conflicts 4.6 Ownership Rights, Minerals, Encumbrances, and Survey Reporting

5 Boundary Law: Easements, PLSS, Water Law, and Conveyances

5.1 Common-Law Principles and Unwritten Rights 5.2 Easements, Licenses, and Rights-of-Way 5.3 Conveyances, Sequential and Simultaneous Rights 5.4 Metes and Bounds Descriptions and Monuments 5.5 PLSS Sections, Townships, and Restoration 5.6 Water Law: Riparian, Littoral, and Moving Boundaries 5.7 Encumbrances, Title Limitations, and Survey Reporting

6 Surveying Principles: Geodesy, Datums, Projections, and SPCS

6.1 Basic Surveying, Route Surveying, and Field Geometry 6.2 Geodesy, Earth Models, and Coordinate Systems 6.3 Horizontal and Vertical Datums 6.4 Map Projections, Convergence, and SPCS 6.5 Coordinate Transformations and Grid-Ground Reductions 6.6 Control Networks, Observation Reductions, and Quality

7 Survey Computations: Bearings, Traverses, Leveling, and COGO

7.1 Bearings, Azimuths, and Direction Conversions 7.2 Coordinate Geometry, Latitudes, and Departures 7.3 Traverse Closure, Error, and Relative Precision 7.4 Traverse Adjustment: Compass Rule and Transit Rule 7.5 Differential Leveling, Height of Instrument, and Closure 7.6 Trigonometric Leveling, Reciprocal Observations, and Spreadsheets

8 Survey Computations: Curves, Volumes, Least Squares, and Computer Applications

8.1 Horizontal Circular Curve Elements 8.2 Curve Staking, Deflections, Offsets, and Coordinate Points 8.3 Vertical Curves, Slopes, and Grades 8.4 Area Computations: Coordinate and Field Methods 8.5 Earthwork Volumes, Contours, and Mass Diagrams 8.6 Least Squares, Residuals, and Error Propagation 8.7 Computer Applications, Calculator, and Spreadsheet Quality Control

9 Applied Mathematics, Statistics, Measurement Science, and Error

9.1 Trigonometry and Right-Triangle Field Reductions 9.2 Analytical Geometry, Coordinate Systems, and Vectors 9.3 Calculus, Change Rates, and Area-Volume Reasoning 9.4 Linear Algebra, Adjustments, and Least-Squares Foundations 9.5 Probability, Statistics, and the Normal Distribution 9.6 Measurement Error, Propagation, Positional Accuracy, and Units

10 Business Concepts, Projects, Safety, Contracts, Ethics, and Communication

10.1 Project Planning, Scope, and Work Breakdown 10.2 Resource Management, Scheduling, and Cost Estimating 10.3 Safety, Risk Management, and Site Liability 10.4 Contracts, Liability, and Change Management 10.5 Supervision, Quality Control, and Records 10.6 Ethics, Communication, and Conflict Resolution

11 Integrated FS Domain Review, Handbook Pacing, and Diagnostics

11.1 Build an Integrated Domain Map 11.2 Reference Handbook Search Workflow 11.3 Approved Calculator Habits 11.4 Pace the 5 Hours 20 Minutes of Exam Time 11.5 Use Diagnostics After a Failed Attempt 11.6 Avoid Common Wrong-Answer Patterns

12 Full FS Scenarios, Final Readiness, and Post-Exam Next Steps

12.1 Mixed Boundary and COGO Scenario 12.2 Geodesy, Mapping, and Field Scenario 12.3 Business, Safety, and Ethics Scenario 12.4 Final Readiness Plan 12.5 Exam-Day Checklist 12.6 Post-Exam Next Steps After Pass or Fail

1.5 Scoring, Pass/Fail Results, and Diagnostics

Key Takeaways Explain This Topic AI

FS results are reported only as pass or fail — no numeric score is released to passing candidates.

The passing standard is set by a criterion-referenced study (modified Angoff), not a curve, so you are not competing against other examinees.

Of the 110 questions, a subset are unscored pretest items; you cannot tell which, so answer every question.

Failing candidates receive a diagnostic report showing performance by major topic area to target a retake.

Last updated: June 2026

Pass/Fail, Not a Score

NCEES reports FS results as pass or fail only . If you pass, you do not receive a percentage or scaled score — the report simply confirms you met the standard. This is deliberate: the credential is binary, so there is no benefit to NCEES releasing a number, and it discourages comparing scores among candidates.

Results are typically available in your MyNCEES account within 7–10 days after the exam, since the CBT items are machine-scored. NCEES notifies you when results post; depending on your state, the board may also be notified directly so it can issue your SI/SIT credential. Practically, this means your job is simple to state and hard to do: get above the cut line . There is no partial credit for a near-miss and no ranking — you either cleared the bar or you did not.

How the Passing Standard Is Set

The FS uses a criterion-referenced passing standard , established through a formal modified Angoff process by a panel of licensed surveyor subject-matter experts. They judge, question by question, how a minimally competent newly graduated surveyor should perform, and those judgments aggregate into the cut score. Two consequences follow:

You are not graded on a curve. Your result does not depend on how others sitting that day performed. Everyone who clears the standard passes; there is no fixed pass rate.

The cut score is comparable across exam forms. Because different candidates see slightly different question sets, NCEES uses statistical equating so a passing performance means the same thing on every form.

  • Property FS scoring approach
  • Reference Criterion-referenced (fixed standard)
  • Standard-setting method Modified Angoff by SME panel
  • Curve? No — not norm-referenced
  • Reported result Pass / fail only
  • Comparability Statistical equating across forms

The takeaway for study: chase mastery of the blueprint , not a guess at a percentage, because the bar reflects competence, not your rank.

Pretest Items and the Diagnostic Report

Of the 110 questions , a portion are unscored pretest items that NCEES is trialing for future exams. They are indistinguishable from scored questions, so the only safe strategy is to treat every question as if it counts and answer all 110 — there is no penalty for guessing .

If you fail , NCEES provides a diagnostic report that breaks down your performance by major topic area (the seven knowledge areas in the blueprint). Use it methodically:

Identify the two or three weakest knowledge areas and weight your retake study toward them.

Do not ignore your stronger areas entirely — re-failing a previously strong area can offset gains elsewhere.

Combine the diagnostic with the blueprint weights from Section 1.6 so you spend retake hours where both your weakness and the question count are highest (e.g., Boundary Law at 19–29 questions).

Passing candidates do not receive a diagnostic because there is nothing to remediate. The report exists to make a retake targeted rather than a blind repeat of your whole preparation.

After Results Post: Passing vs. Failing

What you do next depends entirely on the binary result, and it pays to plan both branches in advance.

If you pass:

NCEES records the result; your state board uses it to issue the SI/SIT credential (some boards require a separate application or fee for the credential itself).

Begin logging qualifying experience under a licensed PS toward the PS exam — keep dated, supervisor-verified records from day one.

You do not retake the FS; the result is your permanent entry credential.

If you fail:

Read the diagnostic report before doing anything else and identify your weakest knowledge areas.

Respect the attempt limits : once per testing window, at most three times per 12-month period, with a new $225 fee each time.

Do not simply re-sit immediately on the same preparation. Re-study the weak areas, redo timed practice, and rebuild the handbook-retrieval habit, then schedule the next window.

  • Outcome Immediate action Watch out for
  • Pass Apply for SI/SIT, start logging experience Board may charge a separate credential fee
  • Fail Study the diagnostic, target weak areas Window/12-month attempt limits; new fee per retake

Either way, treat the result as data: a pass starts the experience clock, and a fail hands you a precise map of what to fix.

Reading the Diagnostic and Planning a Retake

The failing diagnostic is the most valuable feedback NCEES gives, so use it like an engineer reads a report, not like a verdict. It shows your relative performance across the seven knowledge areas — typically a banded indicator (for example, performance below, near, or above the average of passing candidates) per area rather than exact scores.

A disciplined retake workflow:

Rank your areas from weakest to strongest using the diagnostic bands.

Cross-reference the blueprint weights. A weakness in Boundary Law (19–29 Q) or Survey Computations (17–26 Q) is far more costly than the same weakness in Applied Math (10–15 Q) — fix the high-weight weaknesses first.

Re-test honestly. Re-take timed practice in the weak areas under handbook-only conditions; a real gain shows up as faster, more accurate work, not just rereading.

Respect the limits and timing. With at most three attempts per 12 months and one per window, do not rush back unprepared — a too-soon retake on the same study wastes a window and another $225.

  • Diagnostic signal Interpretation Action
  • Weak, high-weight area Costly gap Top priority — most retake hours here
  • Weak, low-weight area Smaller gap Address after high-weight areas
  • Strong area Don't lose it Light maintenance review

Approached this way, a single failure becomes a precise study plan rather than a reason to repeat months of undirected preparation.