Study guide

7.4 Traverse Adjustment: Compass Rule and Transit Rule

NCEES Fundamentals of Surveying FS

Track your progress as you read

Finished sections get a check mark.

1 Orientation: NCEES FS Exam Registration and Scoring

1.1 Official FS Identity and Licensure Purpose 1.2 CBT Delivery, Appointment Timing, and Breaks 1.3 Registration, Fees, Board Approval, and Scheduling 1.4 Reference Handbook, Calculator, and Exam Interface Habits 1.5 Scoring, Pass/Fail Results, and Diagnostics 1.6 First Study Plan From Official Content Areas

2 Surveying Processes, Instrumentation, Control, and Field Workflows

2.1 Instrumentation Selection, Setup, and Observation Quality 2.2 GNSS/GPS Survey Modes, Datums, and Field Checks 2.3 Control Surveys, Networks, Traverses, and Benchmarks 2.4 Topographic Surveys, Feature Coding, and Field Records 2.5 Construction, As-Built, and Land Development Workflows 2.6 Cadastral Field Workflows and Record Keeping

3 Mapping Processes: CAD, GIS, Photogrammetry, UAS, and LiDAR

3.1 Map Purpose, Scale, Symbols, and Generalization 3.2 Topographic Mapping, Contours, and Digital Terrain Models 3.3 CAD, BIM, and Plan Production Workflows 3.4 GIS Data Models, Coordinate Systems, and Attribute Quality 3.5 Photogrammetry, UAS, and Image Processing 3.6 LiDAR, Remote Sensing, and Mapping Quality Control

4 Boundary Law: Public Records, Deeds, and Evidence

4.1 Boundary Law Sources and the Surveyor's Role 4.2 Public Records Research and Indexing 4.3 Deeds, Conveyances, and Description Elements 4.4 Evidence Weighting: Monuments, Measurements, and Occupation 4.5 Chain of Title, Senior Rights, and Record Conflicts 4.6 Ownership Rights, Minerals, Encumbrances, and Survey Reporting

5 Boundary Law: Easements, PLSS, Water Law, and Conveyances

5.1 Common-Law Principles and Unwritten Rights 5.2 Easements, Licenses, and Rights-of-Way 5.3 Conveyances, Sequential and Simultaneous Rights 5.4 Metes and Bounds Descriptions and Monuments 5.5 PLSS Sections, Townships, and Restoration 5.6 Water Law: Riparian, Littoral, and Moving Boundaries 5.7 Encumbrances, Title Limitations, and Survey Reporting

6 Surveying Principles: Geodesy, Datums, Projections, and SPCS

6.1 Basic Surveying, Route Surveying, and Field Geometry 6.2 Geodesy, Earth Models, and Coordinate Systems 6.3 Horizontal and Vertical Datums 6.4 Map Projections, Convergence, and SPCS 6.5 Coordinate Transformations and Grid-Ground Reductions 6.6 Control Networks, Observation Reductions, and Quality

7 Survey Computations: Bearings, Traverses, Leveling, and COGO

7.1 Bearings, Azimuths, and Direction Conversions 7.2 Coordinate Geometry, Latitudes, and Departures 7.3 Traverse Closure, Error, and Relative Precision 7.4 Traverse Adjustment: Compass Rule and Transit Rule 7.5 Differential Leveling, Height of Instrument, and Closure 7.6 Trigonometric Leveling, Reciprocal Observations, and Spreadsheets

8 Survey Computations: Curves, Volumes, Least Squares, and Computer Applications

8.1 Horizontal Circular Curve Elements 8.2 Curve Staking, Deflections, Offsets, and Coordinate Points 8.3 Vertical Curves, Slopes, and Grades 8.4 Area Computations: Coordinate and Field Methods 8.5 Earthwork Volumes, Contours, and Mass Diagrams 8.6 Least Squares, Residuals, and Error Propagation 8.7 Computer Applications, Calculator, and Spreadsheet Quality Control

9 Applied Mathematics, Statistics, Measurement Science, and Error

9.1 Trigonometry and Right-Triangle Field Reductions 9.2 Analytical Geometry, Coordinate Systems, and Vectors 9.3 Calculus, Change Rates, and Area-Volume Reasoning 9.4 Linear Algebra, Adjustments, and Least-Squares Foundations 9.5 Probability, Statistics, and the Normal Distribution 9.6 Measurement Error, Propagation, Positional Accuracy, and Units

10 Business Concepts, Projects, Safety, Contracts, Ethics, and Communication

10.1 Project Planning, Scope, and Work Breakdown 10.2 Resource Management, Scheduling, and Cost Estimating 10.3 Safety, Risk Management, and Site Liability 10.4 Contracts, Liability, and Change Management 10.5 Supervision, Quality Control, and Records 10.6 Ethics, Communication, and Conflict Resolution

11 Integrated FS Domain Review, Handbook Pacing, and Diagnostics

11.1 Build an Integrated Domain Map 11.2 Reference Handbook Search Workflow 11.3 Approved Calculator Habits 11.4 Pace the 5 Hours 20 Minutes of Exam Time 11.5 Use Diagnostics After a Failed Attempt 11.6 Avoid Common Wrong-Answer Patterns

12 Full FS Scenarios, Final Readiness, and Post-Exam Next Steps

12.1 Mixed Boundary and COGO Scenario 12.2 Geodesy, Mapping, and Field Scenario 12.3 Business, Safety, and Ethics Scenario 12.4 Final Readiness Plan 12.5 Exam-Day Checklist 12.6 Post-Exam Next Steps After Pass or Fail

7.4 Traverse Adjustment: Compass Rule and Transit Rule

Key Takeaways Explain This Topic AI

The compass (Bowditch) rule distributes corrections in proportion to each course's length, assuming angles and distances are equally precise.

The transit rule distributes corrections in proportion to the absolute latitude or departure of each course, favoring angular precision.

Each correction carries a sign opposite the misclosure so the adjusted sums become zero.

Compass-rule correction to a latitude = -(latitude misclosure) x (course length / total length).

Adjust latitudes and departures only; do not arbitrarily change the original measured angles and distances.

Last updated: June 2026

Why and How We Adjust

After closure is computed, the small misclosures are distributed back into the courses so the adjusted latitudes and departures sum to exactly zero. Two rules dominate FS problems.

The compass rule , also called the Bowditch rule , assumes the angles and the distances were measured with equal precision and that errors are proportional to course length. The correction to any course is proportional to its length :

  • Correction to latitude_i = -(latitude misclosure) x (L_i / sum L)
  • Correction to departure_i = -(departure misclosure) x (L_i / sum L)

The transit rule assumes the angles were measured more precisely than the distances, so it distributes each correction in proportion to the absolute value of that course's latitude (or departure) :

  • Correction to latitude_i = -(latitude misclosure) x ( |latitude_i| / sum |latitude| )
  • Correction to departure_i = -(departure misclosure) x ( |departure_i| / sum |departure| )

In both rules the correction is opposite in sign to the misclosure, which is what drives the adjusted sum to zero. Pick one rule for the whole table; never mix them unless the problem directs you to.

Worked Compass-Rule Adjustment

Use the traverse from Section 7.3: total length 1230.00 ft, latitude misclosure +0.06 ft, departure misclosure -0.06 ft. Each latitude correction is -(+0.06)(L_i/1230) and each departure correction is -(-0.06)(L_i/1230) = +0.06(L_i/1230).

  • Course L (ft) L/sumL Lat corr (ft) Dep corr (ft)
  • A-B 300 0.2439 -0.0146 +0.0146
  • B-C 250 0.2033 -0.0122 +0.0122
  • C-D 280 0.2276 -0.0137 +0.0137
  • D-A 400 0.3252 -0.0195 +0.0195
  • Sum 1230 1.0000 -0.0600 +0.0600

The latitude corrections total -0.06 ft, exactly canceling the +0.06 ft misclosure; the departure corrections total +0.06 ft, canceling the -0.06 ft misclosure. Apply each correction to its measured component: adjusted latitude A-B = +212.10 + (-0.0146) = +212.085 ft ; adjusted departure A-B = +212.16 + 0.0146 = +212.175 ft . Repeat for every course, then confirm the adjusted latitudes and departures each sum to zero before computing coordinates or area.

Signs, Checks, and FS Traps

Sign rule: correction sign is always opposite the misclosure sign. A positive latitude misclosure means latitudes are too large, so corrections are negative.

Closure check: the sum of the corrections in each column must equal the negative of that column's misclosure; if it does not, you made an arithmetic slip.

Do not edit raw data: adjustment changes the computed latitudes and departures, not the field-recorded angles and distances.

Method selection: if the problem says distances and angles are equally good, use the compass rule; if angles are markedly better, the transit rule is intended. When a problem is silent, the compass rule is the default and far more common on the FS.

Following these rules, your adjusted coordinates will close perfectly and feed directly into area and COGO computations.

From Adjusted Components to Coordinates

Adjustment is not the finish line; the balanced latitudes and departures still have to become coordinates. The accumulation is sequential: each northing is the previous northing plus the adjusted latitude, and each easting is the previous easting plus the adjusted departure. Because the adjusted latitudes and departures now sum to zero, the running totals return precisely to the starting coordinates after the last course, which is the final proof that the adjustment was applied correctly. If your last computed point does not match the start to the last decimal, a correction was misadded somewhere.

Choosing and Defending a Method

  • Feature Compass (Bowditch) rule Transit rule
  • Distributes by course length absolute latitude / departure of the course
  • Assumes angles and distances equally precise angles more precise than distances
  • Frequency on FS very common, default occasional
  • Effect on long courses larger share of correction depends on component size, not length

The compass rule is the workhorse and the safe default when a problem does not specify a method. The transit rule appears when the prompt emphasizes high-quality angular work, such as a theodolite traverse with taped distances of lesser certainty. A third approach you may see named is least squares , the rigorous method that weights every observation by its standard deviation; it is the modern professional standard but is beyond the hand-calculation scope of the FS, which expects the compass or transit rule.

Final FS Checklist for Adjustment

Balance the angles first (sum to (n-2) x 180 deg), then recompute azimuths.

Compute latitudes and departures, then the misclosures .

Apply compass- or transit-rule corrections with signs opposite the misclosures.

Verify each correction column sums to the negative of its misclosure.

Accumulate adjusted components into coordinates and confirm the traverse returns to its start.

Work the steps in this order every time. Skipping the angle balance or applying a correction with the wrong sign are the two errors that most often turn a solvable FS traverse problem into a wrong answer.