Study guide

8.1 Horizontal Circular Curve Elements

NCEES Fundamentals of Surveying FS

Track your progress as you read

Finished sections get a check mark.

1 Orientation: NCEES FS Exam Registration and Scoring

1.1 Official FS Identity and Licensure Purpose 1.2 CBT Delivery, Appointment Timing, and Breaks 1.3 Registration, Fees, Board Approval, and Scheduling 1.4 Reference Handbook, Calculator, and Exam Interface Habits 1.5 Scoring, Pass/Fail Results, and Diagnostics 1.6 First Study Plan From Official Content Areas

2 Surveying Processes, Instrumentation, Control, and Field Workflows

2.1 Instrumentation Selection, Setup, and Observation Quality 2.2 GNSS/GPS Survey Modes, Datums, and Field Checks 2.3 Control Surveys, Networks, Traverses, and Benchmarks 2.4 Topographic Surveys, Feature Coding, and Field Records 2.5 Construction, As-Built, and Land Development Workflows 2.6 Cadastral Field Workflows and Record Keeping

3 Mapping Processes: CAD, GIS, Photogrammetry, UAS, and LiDAR

3.1 Map Purpose, Scale, Symbols, and Generalization 3.2 Topographic Mapping, Contours, and Digital Terrain Models 3.3 CAD, BIM, and Plan Production Workflows 3.4 GIS Data Models, Coordinate Systems, and Attribute Quality 3.5 Photogrammetry, UAS, and Image Processing 3.6 LiDAR, Remote Sensing, and Mapping Quality Control

4 Boundary Law: Public Records, Deeds, and Evidence

4.1 Boundary Law Sources and the Surveyor's Role 4.2 Public Records Research and Indexing 4.3 Deeds, Conveyances, and Description Elements 4.4 Evidence Weighting: Monuments, Measurements, and Occupation 4.5 Chain of Title, Senior Rights, and Record Conflicts 4.6 Ownership Rights, Minerals, Encumbrances, and Survey Reporting

5 Boundary Law: Easements, PLSS, Water Law, and Conveyances

5.1 Common-Law Principles and Unwritten Rights 5.2 Easements, Licenses, and Rights-of-Way 5.3 Conveyances, Sequential and Simultaneous Rights 5.4 Metes and Bounds Descriptions and Monuments 5.5 PLSS Sections, Townships, and Restoration 5.6 Water Law: Riparian, Littoral, and Moving Boundaries 5.7 Encumbrances, Title Limitations, and Survey Reporting

6 Surveying Principles: Geodesy, Datums, Projections, and SPCS

6.1 Basic Surveying, Route Surveying, and Field Geometry 6.2 Geodesy, Earth Models, and Coordinate Systems 6.3 Horizontal and Vertical Datums 6.4 Map Projections, Convergence, and SPCS 6.5 Coordinate Transformations and Grid-Ground Reductions 6.6 Control Networks, Observation Reductions, and Quality

7 Survey Computations: Bearings, Traverses, Leveling, and COGO

7.1 Bearings, Azimuths, and Direction Conversions 7.2 Coordinate Geometry, Latitudes, and Departures 7.3 Traverse Closure, Error, and Relative Precision 7.4 Traverse Adjustment: Compass Rule and Transit Rule 7.5 Differential Leveling, Height of Instrument, and Closure 7.6 Trigonometric Leveling, Reciprocal Observations, and Spreadsheets

8 Survey Computations: Curves, Volumes, Least Squares, and Computer Applications

8.1 Horizontal Circular Curve Elements 8.2 Curve Staking, Deflections, Offsets, and Coordinate Points 8.3 Vertical Curves, Slopes, and Grades 8.4 Area Computations: Coordinate and Field Methods 8.5 Earthwork Volumes, Contours, and Mass Diagrams 8.6 Least Squares, Residuals, and Error Propagation 8.7 Computer Applications, Calculator, and Spreadsheet Quality Control

9 Applied Mathematics, Statistics, Measurement Science, and Error

9.1 Trigonometry and Right-Triangle Field Reductions 9.2 Analytical Geometry, Coordinate Systems, and Vectors 9.3 Calculus, Change Rates, and Area-Volume Reasoning 9.4 Linear Algebra, Adjustments, and Least-Squares Foundations 9.5 Probability, Statistics, and the Normal Distribution 9.6 Measurement Error, Propagation, Positional Accuracy, and Units

10 Business Concepts, Projects, Safety, Contracts, Ethics, and Communication

10.1 Project Planning, Scope, and Work Breakdown 10.2 Resource Management, Scheduling, and Cost Estimating 10.3 Safety, Risk Management, and Site Liability 10.4 Contracts, Liability, and Change Management 10.5 Supervision, Quality Control, and Records 10.6 Ethics, Communication, and Conflict Resolution

11 Integrated FS Domain Review, Handbook Pacing, and Diagnostics

11.1 Build an Integrated Domain Map 11.2 Reference Handbook Search Workflow 11.3 Approved Calculator Habits 11.4 Pace the 5 Hours 20 Minutes of Exam Time 11.5 Use Diagnostics After a Failed Attempt 11.6 Avoid Common Wrong-Answer Patterns

12 Full FS Scenarios, Final Readiness, and Post-Exam Next Steps

12.1 Mixed Boundary and COGO Scenario 12.2 Geodesy, Mapping, and Field Scenario 12.3 Business, Safety, and Ethics Scenario 12.4 Final Readiness Plan 12.5 Exam-Day Checklist 12.6 Post-Exam Next Steps After Pass or Fail

8.1 Horizontal Circular Curve Elements

Key Takeaways Explain This Topic AI

For a simple curve, tangent length T = R·tan(Δ/2), arc length L = πRΔ/180, and long chord LC = 2R·sin(Δ/2).

External distance E = R(sec(Δ/2) − 1) and middle ordinate M = R(1 − cos(Δ/2)); both grow as Δ increases for a fixed radius.

Arc-definition degree of curve D = 5729.58/R is the central angle that subtends a 100-ft arc; chord definition subtends a 100-ft chord.

Station the PC by subtracting T from the PI station, then add the curve length L (never 2T) to reach the PT.

Convert degrees-minutes-seconds to decimal degrees before any sine, cosine, or tangent of the central angle.

Last updated: June 2026

The Simple Circular Curve and Its Six Elements

Horizontal curves sit in the FS Survey Computations and Computer Applications knowledge area, and they reward a candidate who sketches the geometry before reaching for a formula. A simple circular curve is an arc of constant radius R that connects two straight tangent lines. The tangents meet at the point of intersection (PI) , the curve begins at the point of curvature (PC) , and it ends at the point of tangency (PT) . The angle between the two tangents — equal to the central angle Δ (delta) subtended by the arc — is the deflection of the alignment.

The six elements every FS candidate must produce on demand all flow from R and Δ:

  • Element Symbol Formula
  • Tangent length T R·tan(Δ/2)
  • Arc (curve) length L πRΔ/180
  • Long chord LC 2R·sin(Δ/2)
  • External distance E R(sec(Δ/2) − 1)
  • Middle ordinate M R(1 − cos(Δ/2))
  • Degree of curve (arc) D 5729.58/R

Tangent length T is measured from the PI back to the PC, and by symmetry the PI-to-PT distance is the same T. The long chord LC is the straight line from PC to PT. The external distance E runs from the PI to the midpoint of the curve, and the middle ordinate M runs from that curve midpoint to the midpoint of the long chord. Sketching these once removes most sign and substitution errors before any arithmetic begins.

Degree of Curve: Arc vs. Chord Definition

The degree of curve D describes sharpness. Under the arc definition — standard for highways — D is the central angle that subtends a 100-ft arc , giving D = 5729.58/R (because a 100-ft portion of the full 2πR circumference is the fraction D/360). Under the chord definition — traditional in railroad work — D is the central angle that subtends a 100-ft chord , so sin(D/2) = 50/R. For a given R the chord-definition D is very slightly larger, and the two definitions diverge as curves get sharp. Always read which definition a problem states; mixing them is a classic FS trap.

A worked element computation

Given R = 1000 ft and Δ = 24°00'00":

  • T = 1000·tan(12°) = 1000(0.21256) = 212.56 ft
  • L = π(1000)(24)/180 = 418.88 ft
  • LC = 2(1000)·sin(12°) = 2000(0.20791) = 415.82 ft
  • E = 1000(1/cos12° − 1) = 1000(1.02234 − 1) = 22.34 ft
  • M = 1000(1 − cos12°) = 1000(1 − 0.97815) = 21.85 ft
  • D (arc) = 5729.58/1000 = 5°43.7'

Notice L > LC (the arc is longer than its chord) and E > M (the external pulls farther from the PI than the middle ordinate). These inequalities are quick sanity checks: any answer violating them is wrong.

Stationing the PC and PT

Route alignments carry continuous stationing along the tangents and the curve. The single most common stationing mistake is adding 2T instead of L. The correct procedure:

PC station = PI station − T. Stationing follows the tangent into the PC, so you subtract one tangent length.

PT station = PC station + L. Because the alignment now runs along the arc , you advance by the curve length L, not by the chord and not by 2T.

For R = 1000 ft, Δ = 24°, with PI at station 50+00.00: T = 212.56, so PC = 50+00.00 − 2+12.56 = 47+87.44 ; then PT = 47+87.44 + 4+18.88 = 52+06.32 . If you had wrongly used 2T (425.12 ft) the PT would land at 52+12.56 — about 6 ft off, exactly the kind of small error the exam plants.

Angle-unit discipline

FS items often state Δ in degrees-minutes-seconds (DMS) , e.g. 24°17'30". Convert to decimal degrees (24 + 17/60 + 30/3600 = 24.2917°) before any trig, and confirm your calculator is in degree mode , not radians. Memorize 1° = 60', 1' = 60". Keeping R and all distances in the same length unit (all feet or all meters) is equally important, because R appears as a direct multiplier in five of the six element formulas, so a single unit slip scales every result.

Compound, Reverse, and Spiral Curves

Beyond the simple curve, the FS exam expects familiarity with three related horizontal alignments. A compound curve is two or more circular arcs of different radii curving in the same direction, joined at a point of compound curvature (PCC) . Each arc keeps its own R and Δ and is computed separately; the shared tangent point makes the arcs tangent to one another. A reverse curve is two arcs curving in opposite directions, meeting at a point of reverse curvature (PRC) . Reverse curves are avoided on high-speed highways because the superelevation must reverse abruptly, but they appear in property and railroad work.

A spiral (transition) curve is an easement placed between a tangent and a circular arc so that curvature changes gradually rather than instantly. The standard form is the Euler spiral (clothoid) , whose radius decreases in inverse proportion to the length traveled, giving a constant rate of change of curvature. Its purpose is to introduce superelevation (banking) and lateral acceleration smoothly, improving safety and rider comfort. Key spiral terms the exam may reference:

  • Spiral term Meaning
  • TS Tangent-to-spiral point
  • SC Spiral-to-curve point
  • CS Curve-to-spiral point
  • ST Spiral-to-tangent point
  • Ls Spiral length (designer's choice)

The spiral length Ls is selected by the designer based on design speed and the radius of the circular curve it joins; longer spirals suit higher speeds and sharper curves. On the FS exam, spiral questions are usually conceptual — recognizing the TS/SC/CS/ST sequence and the role of the spiral as a smooth easement — rather than full clothoid computation.