Study guide

6.2 Geodesy, Earth Models, and Coordinate Systems

NCEES Fundamentals of Surveying FS

Track your progress as you read

Finished sections get a check mark.

1 Orientation: NCEES FS Exam Registration and Scoring

1.1 Official FS Identity and Licensure Purpose 1.2 CBT Delivery, Appointment Timing, and Breaks 1.3 Registration, Fees, Board Approval, and Scheduling 1.4 Reference Handbook, Calculator, and Exam Interface Habits 1.5 Scoring, Pass/Fail Results, and Diagnostics 1.6 First Study Plan From Official Content Areas

2 Surveying Processes, Instrumentation, Control, and Field Workflows

2.1 Instrumentation Selection, Setup, and Observation Quality 2.2 GNSS/GPS Survey Modes, Datums, and Field Checks 2.3 Control Surveys, Networks, Traverses, and Benchmarks 2.4 Topographic Surveys, Feature Coding, and Field Records 2.5 Construction, As-Built, and Land Development Workflows 2.6 Cadastral Field Workflows and Record Keeping

3 Mapping Processes: CAD, GIS, Photogrammetry, UAS, and LiDAR

3.1 Map Purpose, Scale, Symbols, and Generalization 3.2 Topographic Mapping, Contours, and Digital Terrain Models 3.3 CAD, BIM, and Plan Production Workflows 3.4 GIS Data Models, Coordinate Systems, and Attribute Quality 3.5 Photogrammetry, UAS, and Image Processing 3.6 LiDAR, Remote Sensing, and Mapping Quality Control

4 Boundary Law: Public Records, Deeds, and Evidence

4.1 Boundary Law Sources and the Surveyor's Role 4.2 Public Records Research and Indexing 4.3 Deeds, Conveyances, and Description Elements 4.4 Evidence Weighting: Monuments, Measurements, and Occupation 4.5 Chain of Title, Senior Rights, and Record Conflicts 4.6 Ownership Rights, Minerals, Encumbrances, and Survey Reporting

5 Boundary Law: Easements, PLSS, Water Law, and Conveyances

5.1 Common-Law Principles and Unwritten Rights 5.2 Easements, Licenses, and Rights-of-Way 5.3 Conveyances, Sequential and Simultaneous Rights 5.4 Metes and Bounds Descriptions and Monuments 5.5 PLSS Sections, Townships, and Restoration 5.6 Water Law: Riparian, Littoral, and Moving Boundaries 5.7 Encumbrances, Title Limitations, and Survey Reporting

6 Surveying Principles: Geodesy, Datums, Projections, and SPCS

6.1 Basic Surveying, Route Surveying, and Field Geometry 6.2 Geodesy, Earth Models, and Coordinate Systems 6.3 Horizontal and Vertical Datums 6.4 Map Projections, Convergence, and SPCS 6.5 Coordinate Transformations and Grid-Ground Reductions 6.6 Control Networks, Observation Reductions, and Quality

7 Survey Computations: Bearings, Traverses, Leveling, and COGO

7.1 Bearings, Azimuths, and Direction Conversions 7.2 Coordinate Geometry, Latitudes, and Departures 7.3 Traverse Closure, Error, and Relative Precision 7.4 Traverse Adjustment: Compass Rule and Transit Rule 7.5 Differential Leveling, Height of Instrument, and Closure 7.6 Trigonometric Leveling, Reciprocal Observations, and Spreadsheets

8 Survey Computations: Curves, Volumes, Least Squares, and Computer Applications

8.1 Horizontal Circular Curve Elements 8.2 Curve Staking, Deflections, Offsets, and Coordinate Points 8.3 Vertical Curves, Slopes, and Grades 8.4 Area Computations: Coordinate and Field Methods 8.5 Earthwork Volumes, Contours, and Mass Diagrams 8.6 Least Squares, Residuals, and Error Propagation 8.7 Computer Applications, Calculator, and Spreadsheet Quality Control

9 Applied Mathematics, Statistics, Measurement Science, and Error

9.1 Trigonometry and Right-Triangle Field Reductions 9.2 Analytical Geometry, Coordinate Systems, and Vectors 9.3 Calculus, Change Rates, and Area-Volume Reasoning 9.4 Linear Algebra, Adjustments, and Least-Squares Foundations 9.5 Probability, Statistics, and the Normal Distribution 9.6 Measurement Error, Propagation, Positional Accuracy, and Units

10 Business Concepts, Projects, Safety, Contracts, Ethics, and Communication

10.1 Project Planning, Scope, and Work Breakdown 10.2 Resource Management, Scheduling, and Cost Estimating 10.3 Safety, Risk Management, and Site Liability 10.4 Contracts, Liability, and Change Management 10.5 Supervision, Quality Control, and Records 10.6 Ethics, Communication, and Conflict Resolution

11 Integrated FS Domain Review, Handbook Pacing, and Diagnostics

11.1 Build an Integrated Domain Map 11.2 Reference Handbook Search Workflow 11.3 Approved Calculator Habits 11.4 Pace the 5 Hours 20 Minutes of Exam Time 11.5 Use Diagnostics After a Failed Attempt 11.6 Avoid Common Wrong-Answer Patterns

12 Full FS Scenarios, Final Readiness, and Post-Exam Next Steps

12.1 Mixed Boundary and COGO Scenario 12.2 Geodesy, Mapping, and Field Scenario 12.3 Business, Safety, and Ethics Scenario 12.4 Final Readiness Plan 12.5 Exam-Day Checklist 12.6 Post-Exam Next Steps After Pass or Fail

6.2 Geodesy, Earth Models, and Coordinate Systems

Key Takeaways Explain This Topic AI

Geodesy distinguishes the physical earth, the geoid (equipotential gravity surface), and the reference ellipsoid (smooth math model).

Geodetic coordinates are latitude, longitude, and ellipsoid height (h); the geoid is the reference for orthometric height (H).

Geoid undulation N relates the two heights by h = H + N, and N varies by meters to tens of meters across a project.

Geocentric (ECEF) X, Y, Z, geodetic lat/long/height, and projected plane coordinates are three interchangeable but distinct descriptions of position.

Last updated: June 2026

Three Earth Surfaces

Geodesy is the science of measuring the size and shape of the earth, its gravity field, and how points are positioned on it. The FS exam tests the concepts , not advanced derivations, so you must keep three surfaces clearly separated:

The physical (topographic) surface - the actual rugged ground where measurements are made.

The geoid - an equipotential surface of the earth's gravity field that best fits global mean sea level. It is smooth but undulating because gravity varies with mass distribution. The geoid is the surface a still ocean would form, and it is the reference for orthometric heights (elevations) because water flows along it.

The reference ellipsoid - a smooth mathematical figure (an oblate spheroid) defined by a semi-major axis a and a flattening f. It approximates the geoid well enough for computation. GRS80 (a = 6,378,137 m, 1/f = 298.257222101) is the ellipsoid used by NAD 83 and is essentially identical to WGS 84.

The key insight: the geoid is a gravity surface , the ellipsoid is a geometric surface , and they do not coincide. Their separation at a point is the geoid undulation N .

Heights and Geoid Undulation

Because there are two reference surfaces, there are two kinds of height the FS exam contrasts constantly:

Ellipsoid (geodetic) height, h - the distance from the ellipsoid to the point, measured along the ellipsoid normal. GNSS directly produces h. It has no physical meaning for drainage because it ignores gravity.

Orthometric height, H - the distance from the geoid to the point along the curved plumb line. This is the elevation surveyors and engineers use; water flows downhill in H, not in h.

They are connected by the geoid undulation N through the relation h = H + N , equivalently N = h - H and H = h - N . In the conterminous US, N is negative (the geoid lies below the GRS80 ellipsoid), roughly -8 m to -53 m. Globally N varies about plus or minus 100 m. To convert a GNSS-derived ellipsoid height to a usable elevation, you apply a geoid model (in the US, GEOID18 for NAD 83(2011)/NAVD 88 work).

  • Symbol Height type Reference surface Source
  • h Ellipsoid (geodetic) Reference ellipsoid (GRS80/WGS84) GNSS
  • H Orthometric (elevation) Geoid Leveling or GNSS + geoid model
  • N Geoid undulation Ellipsoid-to-geoid separation Geoid model (GEOID18)

Three Ways to State a Position

The same point can be described three equivalent ways, and FS questions move between them:

Geocentric / Earth-Centered, Earth-Fixed (ECEF): Cartesian X, Y, Z with the origin at the earth's center of mass, the Z-axis through the reference pole, and the X-axis through the prime meridian at the equator. GNSS solves in ECEF.

Geodetic coordinates: latitude (phi), longitude (lambda), and ellipsoid height (h), referenced to a specific ellipsoid and datum. Latitude is measured along the ellipsoid normal , not toward the geocenter, so geodetic latitude differs slightly from geocentric latitude.

Projected (plane) coordinates: northing and easting (e.g., State Plane or UTM) on a flat grid after a map projection.

Converting ECEF to geodetic is a standard closed or iterative computation; converting geodetic to projected applies a map-projection formula. The exam expects you to know which description a tool produces and that a position is incomplete without its datum and height type .

Ellipsoid Parameters and GNSS Geoid Models

A reference ellipsoid is fully defined by two parameters - the semi-major axis a and a measure of polar flattening, usually the flattening f or the first eccentricity e (with e-squared = 2f - f-squared). For GRS80 , a = 6,378,137 m and the inverse flattening 1/f = 298.257222101; WGS 84 shares the same a and a flattening different only in the last digits, so for survey purposes NAD 83 (GRS80) and WGS 84 ellipsoids are treated as geometrically equivalent even though their datum realizations differ at the meter level.

Geodesy reaches surveyors most directly through GNSS heighting . Because a receiver yields ellipsoid height h, every elevation derived from GNSS depends on a geoid model to supply N. The current US model for NAD 83(2011)/NAVD 88 work is GEOID18 ; the modernized NSRS pairs its new frames with GEOID2022 . A geoid model is a grid of undulation values; the software interpolates N at the point and computes H = h - N. The accuracy of the resulting elevation is therefore limited by the accuracy of the geoid model, which is why high-precision vertical work still relies on differential leveling tied to published benchmarks.

  • Concept Definition Why it matters on the FS
  • Semi-major axis a Equatorial radius of the ellipsoid Sizes the model earth
  • Flattening f Polar compression (a - b)/a Distinguishes ellipsoids
  • Geoid model Grid of undulation N Converts GNSS h to elevation H
  • Datum realization/epoch Specific adjustment of a datum at a time Coordinates shift between realizations

Keeping ellipsoid, geoid, datum realization, and height type distinct is exactly the conceptual discipline the FS geodesy questions reward.