Study guide

6.3 Horizontal and Vertical Datums

NCEES Fundamentals of Surveying FS

Track your progress as you read

Finished sections get a check mark.

1 Orientation: NCEES FS Exam Registration and Scoring

1.1 Official FS Identity and Licensure Purpose 1.2 CBT Delivery, Appointment Timing, and Breaks 1.3 Registration, Fees, Board Approval, and Scheduling 1.4 Reference Handbook, Calculator, and Exam Interface Habits 1.5 Scoring, Pass/Fail Results, and Diagnostics 1.6 First Study Plan From Official Content Areas

2 Surveying Processes, Instrumentation, Control, and Field Workflows

2.1 Instrumentation Selection, Setup, and Observation Quality 2.2 GNSS/GPS Survey Modes, Datums, and Field Checks 2.3 Control Surveys, Networks, Traverses, and Benchmarks 2.4 Topographic Surveys, Feature Coding, and Field Records 2.5 Construction, As-Built, and Land Development Workflows 2.6 Cadastral Field Workflows and Record Keeping

3 Mapping Processes: CAD, GIS, Photogrammetry, UAS, and LiDAR

3.1 Map Purpose, Scale, Symbols, and Generalization 3.2 Topographic Mapping, Contours, and Digital Terrain Models 3.3 CAD, BIM, and Plan Production Workflows 3.4 GIS Data Models, Coordinate Systems, and Attribute Quality 3.5 Photogrammetry, UAS, and Image Processing 3.6 LiDAR, Remote Sensing, and Mapping Quality Control

4 Boundary Law: Public Records, Deeds, and Evidence

4.1 Boundary Law Sources and the Surveyor's Role 4.2 Public Records Research and Indexing 4.3 Deeds, Conveyances, and Description Elements 4.4 Evidence Weighting: Monuments, Measurements, and Occupation 4.5 Chain of Title, Senior Rights, and Record Conflicts 4.6 Ownership Rights, Minerals, Encumbrances, and Survey Reporting

5 Boundary Law: Easements, PLSS, Water Law, and Conveyances

5.1 Common-Law Principles and Unwritten Rights 5.2 Easements, Licenses, and Rights-of-Way 5.3 Conveyances, Sequential and Simultaneous Rights 5.4 Metes and Bounds Descriptions and Monuments 5.5 PLSS Sections, Townships, and Restoration 5.6 Water Law: Riparian, Littoral, and Moving Boundaries 5.7 Encumbrances, Title Limitations, and Survey Reporting

6 Surveying Principles: Geodesy, Datums, Projections, and SPCS

6.1 Basic Surveying, Route Surveying, and Field Geometry 6.2 Geodesy, Earth Models, and Coordinate Systems 6.3 Horizontal and Vertical Datums 6.4 Map Projections, Convergence, and SPCS 6.5 Coordinate Transformations and Grid-Ground Reductions 6.6 Control Networks, Observation Reductions, and Quality

7 Survey Computations: Bearings, Traverses, Leveling, and COGO

7.1 Bearings, Azimuths, and Direction Conversions 7.2 Coordinate Geometry, Latitudes, and Departures 7.3 Traverse Closure, Error, and Relative Precision 7.4 Traverse Adjustment: Compass Rule and Transit Rule 7.5 Differential Leveling, Height of Instrument, and Closure 7.6 Trigonometric Leveling, Reciprocal Observations, and Spreadsheets

8 Survey Computations: Curves, Volumes, Least Squares, and Computer Applications

8.1 Horizontal Circular Curve Elements 8.2 Curve Staking, Deflections, Offsets, and Coordinate Points 8.3 Vertical Curves, Slopes, and Grades 8.4 Area Computations: Coordinate and Field Methods 8.5 Earthwork Volumes, Contours, and Mass Diagrams 8.6 Least Squares, Residuals, and Error Propagation 8.7 Computer Applications, Calculator, and Spreadsheet Quality Control

9 Applied Mathematics, Statistics, Measurement Science, and Error

9.1 Trigonometry and Right-Triangle Field Reductions 9.2 Analytical Geometry, Coordinate Systems, and Vectors 9.3 Calculus, Change Rates, and Area-Volume Reasoning 9.4 Linear Algebra, Adjustments, and Least-Squares Foundations 9.5 Probability, Statistics, and the Normal Distribution 9.6 Measurement Error, Propagation, Positional Accuracy, and Units

10 Business Concepts, Projects, Safety, Contracts, Ethics, and Communication

10.1 Project Planning, Scope, and Work Breakdown 10.2 Resource Management, Scheduling, and Cost Estimating 10.3 Safety, Risk Management, and Site Liability 10.4 Contracts, Liability, and Change Management 10.5 Supervision, Quality Control, and Records 10.6 Ethics, Communication, and Conflict Resolution

11 Integrated FS Domain Review, Handbook Pacing, and Diagnostics

11.1 Build an Integrated Domain Map 11.2 Reference Handbook Search Workflow 11.3 Approved Calculator Habits 11.4 Pace the 5 Hours 20 Minutes of Exam Time 11.5 Use Diagnostics After a Failed Attempt 11.6 Avoid Common Wrong-Answer Patterns

12 Full FS Scenarios, Final Readiness, and Post-Exam Next Steps

12.1 Mixed Boundary and COGO Scenario 12.2 Geodesy, Mapping, and Field Scenario 12.3 Business, Safety, and Ethics Scenario 12.4 Final Readiness Plan 12.5 Exam-Day Checklist 12.6 Post-Exam Next Steps After Pass or Fail

6.3 Horizontal and Vertical Datums

Key Takeaways Explain This Topic AI

A horizontal datum fixes latitude/longitude; NAD 83 superseded NAD 27, and the two differ by tens to ~100+ meters.

NAVD 88 is the current US vertical datum; NGVD 29 is its predecessor and the two are not interchangeable.

The 2022 NSRS modernization replaces NAD 83 with four plate-fixed terrestrial reference frames and NAVD 88 with NAPGD2022.

Datum transformation requires published parameters or grids (e.g., NADCON/GEOCON), never simple relabeling of coordinates.

Last updated: June 2026

What a Datum Is

A datum is the reference frame that gives coordinates meaning. A horizontal (geodetic) datum ties latitude and longitude to a specific ellipsoid and a network of monumented control; a vertical datum defines the zero surface for elevations. A coordinate pair without its datum is ambiguous, because the same physical point has different numerical coordinates in different datums. The FS exam tests this repeatedly: stating that a point is at a given latitude/longitude or elevation is incomplete unless the datum (and realization/epoch) is named.

Horizontal datums in US practice:

NAD 27 (North American Datum of 1927) - based on the Clarke 1866 ellipsoid, fixed at Meades Ranch, Kansas , with a non-geocentric origin. It is a local, distortion-prone datum.

NAD 83 (1986 and later realizations such as NAD 83(2011)) - based on the GRS80 ellipsoid, originally intended to be geocentric. It is the current official horizontal datum but is now known to be offset from the true geocenter by about 2.2 m .

The shift from NAD 27 to NAD 83 moves coordinates by tens to over a hundred meters , varying by location, so the two can never be used together without a transformation.

Vertical Datums and Transformations

Vertical datums in US practice:

NGVD 29 (National Geodetic Vertical Datum of 1929) - the older elevation datum, tied to 26 tide-gauge sea-level determinations.

NAVD 88 (North American Vertical Datum of 1988) - the current official datum, adjusted to a single primary benchmark ( Father Point/Rimouski, Quebec ). NGVD 29 and NAVD 88 differ by variable amounts (commonly a few decimeters to over a meter across the country), so elevations must be labeled with their datum.

Transformations are not relabeling. To move coordinates between datums you must apply published parameters or interpolation grids:

  • Conversion Tool What it does
  • NAD 27 <-> NAD 83 (horizontal) NADCON Grid-shift latitude/longitude
  • NAD 83 realization <-> later realization HTDP / GEOCON Account for plate motion and realization differences
  • NGVD 29 <-> NAVD 88 (vertical) VERTCON Grid-shift orthometric heights
  • Ellipsoid height <-> orthometric GEOID18 Apply geoid undulation N

Using the wrong tool, or assuming a constant shift, produces errors of meters - a classic FS distractor.

The 2022 NSRS Modernization

The National Geodetic Survey is replacing both NAD 83 and NAVD 88 in its modernized National Spatial Reference System (NSRS) . The FS exam now expects awareness of this transition. Key facts:

NAD 83 is replaced by four plate-fixed terrestrial reference frames , each rotating with its tectonic plate and defined relative to the International Terrestrial Reference Frame (ITRF2020) : NATRF2022 (North America), PATRF2022 (Pacific), CATRF2022 (Caribbean), and MATRF2022 (Mariana).

NAVD 88 is replaced by the North American-Pacific Geopotential Datum of 2022 (NAPGD2022) , a gravimetric geoid-based vertical datum whose model is GEOID2022 .

Motivation: NAD 83 is non-geocentric by ~2.2 m and NAVD 88 is biased ~0.5 m and tilted ~1 m coast to coast relative to modern global geoid models.

The new frames are time-dependent (coordinates carry an epoch ) because tectonic plates move. Official transition is anticipated around 2027 .

Expect coordinate shifts of roughly a meter or more when transforming from NAD 83(2011)/NAVD 88 to the modernized frames - again requiring published transformation tools, not relabeling.

Realizations, Epochs, and Why Datums Drift

A single datum name hides several realizations - successive readjustments as new data arrive. NAD 83 has been realized as NAD 83(1986), NAD 83(HARN/HPGN), NAD 83(CORS96), and NAD 83(2011) , each tied to a reference epoch (NAD 83(2011) uses epoch 2010.00). Coordinates can differ by centimeters to decimeters between realizations of the same datum, so a complete coordinate statement names the datum, the realization, and the epoch - for example "NAD 83(2011) epoch 2010.00." Treating two realizations as identical is a subtle but real FS error.

The deeper reason the modernized NSRS is time-dependent is that the North American plate moves roughly 2 to 3 cm per year relative to the global frame. A fixed-coordinate datum slowly disagrees with reality; the new plate-fixed frames (NATRF2022 and its siblings) rotate with their plates so that points on stable crust keep nearly constant coordinates, while the relationship to the global ITRF2020 carries the time information through the epoch.

  • Item Legacy NSRS Modernized NSRS (2022)
  • Horizontal NAD 83 (GRS80) NATRF2022 + 3 plate frames (ITRF2020)
  • Vertical NAVD 88 NAPGD2022 (GEOID2022)
  • Time handling Fixed coordinates Epoch-tagged, plate-fixed
  • Geocentricity Off by ~2.2 m Geocentric

The practical message for the FS candidate: always carry datum, realization, epoch, and the transformation tool used; never assume coordinates with different tags can be combined directly.

A further distinction the exam draws is dynamic vs static vertical references. NAVD 88 is a static geopotential datum fixed to a single benchmark, so it does not perfectly track the present-day global geoid. NAPGD2022 is a gravimetric datum derived from a continuously improving geoid model rather than from a single leveling adjustment, which is how it removes the roughly half-meter bias and one-meter tilt that NGS attributes to NAVD 88.

Understanding that the vertical datum is becoming a model-defined surface rather than a network of leveled marks is the single most important conceptual update the modernization brings to elevation work.